- 14 Feb, 2020 4 commits
-
-
Nobuhiro Iwamatsu authored
[ This is a fix specific to 4.4.y and 4.9.y stable trees; 4.14.y and older are not affected ] The of-node refcount fixes were made in commit 8d166720 ("ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()"), but not enough in 4.4.y and 4.9.y. The modification of link->codec_of_node is missing. This fixes of-node refcount unbalance to link->codec_of_node. Fixes: 8d166720 ("ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()") Cc: Patrick Lai <plai@codeaurora.org> Cc: Banajit Goswami <bgoswami@codeaurora.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Mark Brown <broonie@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
[ Upstream commit 34ca70ef ] As discussed in the strace issue tracker, it appears that the sparc32 sysvipc support has been broken for the past 11 years. It was however working in compat mode, which is how it must have escaped most of the regular testing. The problem is that a cleanup patch inadvertently changed the uid/gid fields in struct ipc64_perm from 32-bit types to 16-bit types in uapi headers. Both glibc and uclibc-ng still use the original types, so they should work fine with compat mode, but not natively. Change the definitions to use __kernel_uid32_t and __kernel_gid32_t again. Fixes: 83c86984 ("sparc: unify ipcbuf.h") Link: https://github.com/strace/strace/issues/116 Cc: <stable@vger.kernel.org> # v2.6.29 Cc: Sam Ravnborg <sam@ravnborg.org> Cc: "Dmitry V . Levin" <ldv@altlinux.org> Cc: Rich Felker <dalias@libc.org> Cc: libc-alpha@sourceware.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pawan Gupta authored
[ Upstream commit 5efc6fa9 ] /proc/cpuinfo currently reports Hardware Lock Elision (HLE) feature to be present on boot cpu even if it was disabled during the bootup. This is because cpuinfo_x86->x86_capability HLE bit is not updated after TSX state is changed via the new MSR IA32_TSX_CTRL. Update the cached HLE bit also since it is expected to change after an update to CPUID_CLEAR bit in MSR IA32_TSX_CTRL. Fixes: 95c5824f ("x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default") Signed-off-by:
Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Neelima Krishnan <neelima.krishnan@intel.com> Reviewed-by:
Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/2529b99546294c893dfa1c89e2b3e46da3369a59.1578685425.git.pawan.kumar.gupta@linux.intel.comSigned-off-by:
-
Johan Hovold authored
[ Upstream commit 1b257870 ] Make sure to use the current alternate setting, which need not be the first one by index, when verifying the endpoint descriptors and initialising the URBs. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 26ff6313 ("[media] Add support for the IguanaWorks USB IR Transceiver") Fixes: ab1cbdf1 ("media: iguanair: add sanity checks") Cc: stable <stable@vger.kernel.org> # 3.6 Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
- 05 Feb, 2020 36 commits
-
-
Greg Kroah-Hartman authored
-
Josef Bacik authored
commit d55966c4 upstream. There was some logic added a while ago to clear out f_bavail in statfs() if we did not have enough free metadata space to satisfy our global reserve. This was incorrect at the time, however didn't really pose a problem for normal file systems because we would often allocate chunks if we got this low on free metadata space, and thus wouldn't really hit this case unless we were actually full. Fast forward to today and now we are much better about not allocating metadata chunks all of the time. Couple this with d792b0f1 ("btrfs: always reserve our entire size for the global reserve") which now means we'll easily have a larger global reserve than our free space, we are now more likely to trip over this while still having plenty of space. Fix this by skipping this logic if the global rsv's space_info is not full. space_info->full is 0 unless we've attempted to allocate a chunk for that space_info and that has failed. If this happens then the space for the global reserve is definitely sacred and we need to report b_avail == 0, but before then we can just use our calculated b_avail. Reported-by:
Martin Steigerwald <martin@lichtvoll.de> Fixes: ca8a51b3 ("btrfs: statfs: report zero available if metadata are exhausted") CC: stable@vger.kernel.org # 4.5+ Reviewed-by:
Qu Wenruo <wqu@suse.com> Tested-By:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Praveen Chaudhary authored
[ Upstream commit 189c9b1e ] skb->csum is updated incorrectly, when manipulation for NF_NAT_MANIP_SRC\DST is done on IPV6 packet. Fix: There is no need to update skb->csum in inet_proto_csum_replace16(), because update in two fields a.) IPv6 src/dst address and b.) L4 header checksum cancels each other for skb->csum calculation. Whereas inet_proto_csum_replace4 function needs to update skb->csum, because update in 3 fields a.) IPv4 src/dst address, b.) IPv4 Header checksum and c.) L4 header checksum results in same diff as L4 Header checksum for skb->csum calculation. [ pablo@netfilter.org: a few comestic documentation edits ] Signed-off-by:
Praveen Chaudhary <pchaudhary@linkedin.com> Signed-off-by:
Zhenggen Xu <zxu@linkedin.com> Signed-off-by:
Andy Stracner <astracner@linkedin.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 66018a10 ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 70a87287 ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Finn Thain authored
[ Upstream commit 3f4b7e6a ] Make sure the SONIC's DMA engine is idle before altering the transmit and receive descriptors. Add a helper for this as it will be needed again. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Finn Thain authored
[ Upstream commit 9e311820 ] The SONIC can sometimes advance its rx buffer pointer (RRP register) without advancing its rx descriptor pointer (CRDA register). As a result the index of the current rx descriptor may not equal that of the current rx buffer. The driver mistakenly assumes that they are always equal. This assumption leads to incorrect packet lengths and possible packet duplication. Avoid this by calling a new function to locate the buffer corresponding to a given descriptor. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Finn Thain authored
[ Upstream commit e3885f57 ] The driver accesses descriptor memory which is simultaneously accessed by the chip, so the compiler must not be allowed to re-order CPU accesses. sonic_buf_get() used 'volatile' to prevent that. sonic_buf_put() should have done so too but was overlooked. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Finn Thain authored
[ Upstream commit 865ad2f2 ] The netif_stop_queue() call in sonic_send_packet() races with the netif_wake_queue() call in sonic_interrupt(). This causes issues like "NETDEV WATCHDOG: eth0 (macsonic): transmit queue 0 timed out". Fix this by disabling interrupts when accessing tx_skb[] and next_tx. Update a comment to clarify the synchronization properties. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Madalin Bucur authored
[ Upstream commit 457bfc0a ] As the only 10G PHY interface type defined at the moment the code was developed was XGMII, although the PHY interface mode used was not XGMII, XGMII was used in the code to denote 10G. This patch renames the 10G interface mode to remove the ambiguity. Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
-
Madalin Bucur authored
[ Upstream commit 1d3ca681 ] When fsl,erratum-a011043 is set, adjust for erratum A011043: MDIO reads to internal PCS registers may result in having the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and read data (MDIO_DATA[MDIO_DATA]) is correct. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by:
-
Madalin Bucur authored
[ Upstream commit 73d527ae ] Add fsl,erratum-a011043 to internal MDIO buses. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 22e98449 ] Driver while collecting firmware dump takes longer time to collect/process some of the firmware dump entries/memories. Bigger capture masks makes it worse as it results in larger amount of data being collected and results in CPU soft lockup. Place cond_resched() in some of the driver flows that are expectedly time consuming to relinquish the CPU to avoid CPU soft lockup panic. Signed-off-by:
Shahed Shaikh <shshaikh@marvell.com> Tested-by:
Yonggen Xu <Yonggen.Xu@dell.com> Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
-
Hayes Wang authored
[ Upstream commit 9583a363 ] Initailization would reset runtime suspend by tp->saved_wolopts, so the tp->saved_wolopts should be set before initializing. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 78f7a756 ] The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl(). The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command. Some of the commands are handled in readrids(), where the user controlled command is converted into a driver-internal value called "ridcode". There are two command values, AIROGWEPKTMP and AIROGWEPKNV, which correspond to ridcode values of RID_WEP_TEMP and RID_WEP_PERM respectively. These commands both have checks that the user has CAP_NET_ADMIN, with the comment that "Only super-user can read WEP keys", otherwise they return -EPERM. However there is another command value, AIRORRID, that lets the user specify the ridcode value directly, with no other checks. This means the user can bypass the CAP_NET_ADMIN check on AIROGWEPKTMP and AIROGWEPKNV. Fix it by moving the CAP_NET_ADMIN check out of the command handling and instead do it later based on the ridcode. That way regardless of whether the ridcode is set via AIROGWEPKTMP or AIROGWEPKNV, or passed in using AIRORID, we always do the CAP_NET_ADMIN check. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by:
Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit d6bce213 ] The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl(). The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command and a length. Some of the commands are handled in readrids(), which kmalloc()'s a buffer of RIDSIZE (2048) bytes. That buffer is then passed to PC4500_readrid(), which has two cases. The else case does some setup and then reads up to RIDSIZE bytes from the hardware into the kmalloc()'ed buffer. Here len == RIDSIZE, pBuf is the kmalloc()'ed buffer: // read the rid length field bap_read(ai, pBuf, 2, BAP1); // length for remaining part of rid len = min(len, (int)le16_to_cpu(*(__le16*)pBuf)) - 2; ... // read remainder of the rid rc = bap_read(ai, ((__le16*)pBuf)+1, len, BAP1); PC4500_readrid() then returns to readrids() which does: len = comp->len; if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) { Where comp->len is the user controlled length field. So if the "rid length field" returned by the hardware is < 2048, and the user requests 2048 bytes in comp->len, we will leak the previous contents of the kmalloc()'ed buffer to userspace. Fix it by kzalloc()'ing the buffer. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by:
-
Hannes Reinecke authored
[ Upstream commit 0e220962 ] When a link is going down the driver will be calling fnic_cleanup_io(), which will traverse all commands and calling 'done' for each found command. While the traversal is handled under the host_lock, calling 'done' happens after the host_lock is being dropped. As fnic_queuecommand_lck() is being called with the host_lock held, it might well be that it will pick the command being selected for abortion from the above routine and enqueue it for sending, but then 'done' is being called on that very command from the above routine. Which of course confuses the hell out of the scsi midlayer. So fix this by not queueing commands when fnic_cleanup_io is active. Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.deSigned-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 95224166 ] With an ebpf program that redirects packets through a vti[6] interface, the packets are dropped because no dst is attached. This could also be reproduced with an AF_PACKET socket, with the following python script (vti1 is an ip_vti interface): import socket send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0) # scapy # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request') # raw(p) req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00' send_s.sendto(req, ('vti1', 0x800, 0, 0)) Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit e1611965 ] After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the wext code produces a bogus warning: In function 'iw_handler_get_iwstats', inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9, inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10, inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8, inlined from 'wext_handle_ioctl': net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull] memcpy(extra, stats, sizeof(struct iw_statistics)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from arch/x86/include/asm/string.h:5, net/wireless/wext-core.c: In function 'wext_handle_ioctl': arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here The problem is that ioctl_standard_call() sometimes calls the handler with a NULL argument that would cause a problem for iw_handler_get_iwstats. However, iw_handler_get_iwstats never actually gets called that way. Marking that function as noinline avoids the warning and leads to slightly smaller object code as well. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jouni Malinen authored
[ Upstream commit 6f601265 ] TKIP replay protection was skipped for the very first frame received after a new key is configured. While this is potentially needed to avoid dropping a frame in some cases, this does leave a window for replay attacks with group-addressed frames at the station side. Any earlier frame sent by the AP using the same key would be accepted as a valid frame and the internal RSC would then be updated to the TSC from that frame. This would allow multiple previously transmitted group-addressed frames to be replayed until the next valid new group-addressed frame from the AP is received by the station. Fix this by limiting the no-replay-protection exception to apply only for the case where TSC=0, i.e., when this is for the very first frame protected using the new key, and the local RSC had not been set to a higher value when configuring the key (which may happen with GTK). Signed-off-by:
Jouni Malinen <j@w1.fi> Link: https://lore.kernel.org/r/20200107153545.10934-1-j@w1.fiSigned-off-by:
-
Ganapathi Bhat authored
[ Upstream commit c4b9d655 ] Commit e33e2241 ("Revert "cfg80211: Use 5MHz bandwidth by default when checking usable channels"") fixed a broken regulatory (leaving channel 12 open for AP where not permitted). Apply a similar fix to custom regulatory domain processing. Signed-off-by:
Cathy Luo <xiaohua.luo@nxp.com> Signed-off-by:
Ganapathi Bhat <ganapathi.bhat@nxp.com> Link: https://lore.kernel.org/r/1576836859-8945-1-git-send-email-ganapathi.bhat@nxp.com [reword commit message, fix coding style, add a comment] Signed-off-by:
-
Cambda Zhu authored
[ Upstream commit 4fad78ad ] This patch fixes the calculation of queue when we restore flow director filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's vf may be zero which makes the queue outside of the rx_ring array. The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry(). Signed-off-by:
Cambda Zhu <cambda@linux.alibaba.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Radoslaw Tyl authored
[ Upstream commit aa604651 ] Currently, though the FDB entry is added to VF, it does not appear in RAR filters. VF driver only allows to add 10 entries. Attempting to add another causes an error. This patch removes limitation and allows use of all free RAR entries for the FDB if needed. Fixes: 46ec20ff ("ixgbevf: Add macvlan support in the set rx mode op") Signed-off-by:
Radoslaw Tyl <radoslawx.tyl@intel.com> Acked-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit 8bea5ac0 ] Determined empirically, no documentation is available. The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing what is going on, ended up just dividing the rate as of commit f36797ee ("ARM: mmp/mmp2: dt: enable the clock")' Link: https://lore.kernel.org/r/20191218190454.420358-3-lkundrak@v3.skSigned-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Markus Theil authored
[ Upstream commit 02a61449 ] The following warning is triggered every time an unestablished mesh peer gets dumped. Checks if a peer link is established before retrieving the airtime link metric. [ 9563.022567] WARNING: CPU: 0 PID: 6287 at net/mac80211/mesh_hwmp.c:345 airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022697] Hardware name: PC Engines apu2/apu2, BIOS v4.10.0.3 [ 9563.022756] RIP: 0010:airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022838] Call Trace: [ 9563.022897] sta_set_sinfo+0x936/0xa10 [mac80211] [ 9563.022964] ieee80211_dump_station+0x6d/0x90 [mac80211] [ 9563.023062] nl80211_dump_station+0x154/0x2a0 [cfg80211] [ 9563.023120] netlink_dump+0x17b/0x370 [ 9563.023130] netlink_recvmsg+0x2a4/0x480 [ 9563.023140] ____sys_recvmsg+0xa6/0x160 [ 9563.023154] ___sys_recvmsg+0x93/0xe0 [ 9563.023169] __sys_recvmsg+0x7e/0xd0 [ 9563.023210] do_syscall_64+0x4e/0x140 [ 9563.023217] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20191203180644.70653-1-markus.theil@tu-ilmenau.de [rewrite commit message] Signed-off-by:
-
Dave Gerlach authored
[ Upstream commit 03729cfa ] Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this checks the value of the static variable m3_ipc_state to see if the wkup_m3 is ready. Currently this is populated during probe before rproc_boot has been called, meaning there is a window of time that wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not ready, leading to invalid IPC calls to the wkup_m3 and system instability. To avoid this, move the population of the m3_ipc_state variable until after rproc_boot has succeeded to guarantee a valid and usable handle is always returned. Reported-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit e17e7c49 ] On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19 connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator which is connected to the COMQ port. Model 5V0 regulator here in order for it to be used in am57xx-evm to model 3V6 regulator. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Lee Jones authored
A pointer to 'struct si470x_device' is currently used after free: drivers/media/radio/si470x/radio-si470x-i2c.c:462:25-30: ERROR: reference preceded by free on line 460 Shift the call to free() down past its final use. NB: Not sending to Mainline, since the problem does not exist there, it was caused by the backport of 2df200ab ("media: si470x-i2c: add missed operations in remove") to the stable trees. Cc: <stable@vger.kernel.org> # v3.18+ Reported-by:kbuild test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Bin Liu authored
[ Upstream commit 09ed259f ] VBUS should be turned off when leaving the host mode. Set GCTL_PRTCAP to device mode in teardown to de-assert DRVVBUS pin to turn off VBUS power. Fixes: 5f94adfe ("usb: dwc3: core: refactor mode initialization to its own function") Cc: stable@vger.kernel.org Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 11eb85ec upstream. Syzbot managed to trigger a use after free "KASAN: use-after-free Write in hci_sock_bind". I have reviewed the code manually and one possibly cause I have found is that we are not holding lock_sock(sk) when we do the hci_dev_put(hdev) in hci_sock_release(). My theory is that the bind and the release are racing against each other which results in this use after free. Reported-by: syzbot+eba992608adf3d796bcc@syzkaller.appspotmail.com Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Zhenzhong Duan authored
commit 9a655c77 upstream. tpk_write()/tpk_close() could be interrupted when holding a mutex, then in timer handler tpk_write() may be called again trying to acquire same mutex, lead to deadlock. Google syzbot reported this issue with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:938 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/1 1 lock held by swapper/1/0: ... Call Trace: <IRQ> dump_stack+0x197/0x210 ___might_sleep.cold+0x1fb/0x23e __might_sleep+0x95/0x190 __mutex_lock+0xc5/0x13c0 mutex_lock_nested+0x16/0x20 tpk_write+0x5d/0x340 resync_tnc+0x1b6/0x320 call_timer_fn+0x1ac/0x780 run_timer_softirq+0x6c3/0x1790 __do_softirq+0x262/0x98c irq_exit+0x19b/0x1e0 smp_apic_timer_interrupt+0x1a3/0x610 apic_timer_interrupt+0xf/0x20 </IRQ> See link https://syzkaller.appspot.com/bug?extid=2eeef62ee31f9460ad65 for more details. Fix it by using spinlock in process context instead of mutex and having interrupt disabled in critical section. Reported-by: syzbot+2eeef62ee31f9460ad65@syzkaller.appspotmail.com Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200113034842.435-1-zhenzhong.duan@gmail.comSigned-off-by:
-
Hans Verkuil authored
commit 569bc8d6 upstream. This fixes a syzbot failure since actlen could be uninitialized, but it was still used. Syzbot link: https://syzkaller.appspot.com/bug?extid=6bf9606ee955b646c0e1 Reported-and-tested-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
-
Hans Verkuil authored
commit de89d086 upstream. Allocate gspca_dev->usb_buf with kzalloc instead of kmalloc to ensure it is property zeroed. This fixes various syzbot errors about uninitialized data. Syzbot links: https://syzkaller.appspot.com/bug?extid=32310fc2aea76898d074 https://syzkaller.appspot.com/bug?extid=99706d6390be1ac542a2 https://syzkaller.appspot.com/bug?extid=64437af5c781a7f0e08e Reported-and-tested-by: syzbot+32310fc2aea76898d074@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+99706d6390be1ac542a2@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+64437af5c781a7f0e08e@syzkaller.appspotmail.com Signed-off-by:
-
Sean Young authored
commit 51d0c99b upstream. If usb_bulk_msg() fails, actual_length can be uninitialized. Reported-by: syzbot+9d42b7773d2fecd983ab@syzkaller.appspotmail.com Signed-off-by:
-
Sean Young authored
commit eecc70d2 upstream. This results in an uninitialized variable read. Reported-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com Signed-off-by:
-
Jan Kara authored
commit 5474ca7d upstream. When a filesystem is mounted with jdev mount option, we store the journal device name in an allocated string in superblock. However we fail to ever free that string. Fix it. Reported-by: syzbot+1c6756baf4b16b94d2a6@syzkaller.appspotmail.com Fixes: c3aa0776 ("reiserfs: Properly display mount options in /proc/mounts") CC: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
