Pull MIPS fixes from Paul Burton:
 "A few MIPS fixes for 4.18:

   - a GPIO device name fix for a regression in v4.15-rc1.

   - an errata workaround for the BCM5300X platform.

   - a fix to ftrace function graph tracing, broken for a long time with
     the fix applying cleanly back as far as v3.17.

   - addition of read barriers to in{b,w,l,q}() functions, matching
     behavior of other architectures & mirroring the equivalent addition
     to read{b,w,l,q} in v4.17-rc2.

  Plus changes to wire up new syscalls introduced in the 4.18 cycle:

   - Restartable sequences support is added, including MIPS support in
     the selftests.

   - io_pgetevents is wired up"

* tag 'mips_fixes_4.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Wire up io_pgetevents syscall
  rseq/selftests: Implement MIPS support
  MIPS: Wire up the restartable sequences (rseq) syscall
  MIPS: Add syscall detection for restartable sequences
  MIPS: Add support for restartable sequences
  MIPS: io: Add barrier after register read in inX()
  mips: ftrace: fix static function graph tracing
  MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum
  MIPS: pb44: Fix i2c-gpio GPIO descriptor table

Pull block fixes from Jens Axboe:

 - Further timeout fixes. We aren't quite there yet, so expect another
   round of fixes for that to completely close some of the IRQ vs
   completion races. (Christoph/Bart)

 - Set of NVMe fixes from the usual suspects, mostly error handling

 - Two off-by-one fixes (Dan)

 - Another bdi race fix (Jan)

 - Fix nbd reconfigure with NBD_DISCONNECT_ON_CLOSE (Doron)

* tag 'for-linus-20180623' of git://git.kernel.dk/linux-block:
  blk-mq: Fix timeout handling in case the timeout handler returns BLK_EH_DONE
  bdi: Fix another oops in wb_workfn()
  lightnvm: Remove depends on HAS_DMA in case of platform dependency
  nvme-pci: limit max IO size and segments to avoid high order allocations
  nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl
  nvme-fc: release io queues to allow fast fail
  nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.
  block: sed-opal: Fix a couple off by one bugs
  blk-mq-debugfs: Off by one in blk_mq_rq_state_name()
  nvmet: reset keep alive timer in controller enable
  nvme-rdma: don't override opts->queue_size
  nvme-rdma: Fix command completion race at error recovery
  nvme-rdma: fix possible free of a non-allocated async event buffer
  nvme-rdma: fix possible double free condition when failing to create a controller
  Revert "block: Add warning for bi_next not NULL in bio_endio()"
  block: fix timeout changes for legacy request drivers

Pull crypto fixes from Herbert Xu:

 - Fix use after free in chtls

 - Fix RBP breakage in sha3

 - Fix use after free in hwrng_unregister

 - Fix overread in morus640

 - Move sleep out of kernel_neon in arm64/aes-blk

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: core - Always drop the RNG in hwrng_unregister()
  crypto: morus640 - Fix out-of-bounds access
  crypto: don't optimize keccakf()
  crypto: arm64/aes-blk - fix and move skcipher_walk_done out of kernel_neon_begin, _end
  crypto: chtls - use after free in chtls_pt_recvmsg()

Merge tag 'linux-kselftest-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:

 - fix new sparc64 adi driver test compile errors on non-sparc systems

 - fix config fragment for sync framework for improved test coverage

 - fix several tests to return correct Kselftest skip code

* tag 'linux-kselftest-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: sparc64: Add missing SPDX License Identifiers
  selftests: sparc64: delete RUN_TESTS and EMIT_TESTS overrides
  selftests: sparc64: Fix to do nothing on non-sparc64
  selftests: sync: add config fragment for testing sync framework
  selftests: vm: return Kselftest Skip code for skipped tests
  selftests: zram: return Kselftest Skip code for skipped tests
  selftests: user: return Kselftest Skip code for skipped tests
  selftests: sysctl: return Kselftest Skip code for skipped tests
  selftests: static_keys: return Kselftest Skip code for skipped tests
  selftests: pstore: return Kselftest Skip code for skipped tests

Pull tracing fixes from Steven Rostedt:
 "This contains a few fixes and a clean up.

   - a bad merge caused an "endif" to go in the wrong place in
     scripts/Makefile.build

   - softirq tracing fix for tracing that corrupts lockdep and causes a
     false splat

   - histogram documentation typo fixes

   - fix a bad memory reference when passing in no filter to the filter
     code

   - simplify code by using the swap macro instead of open coding the
     swap"

* tag 'trace-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount
  tracing: Fix some errors in histogram documentation
  tracing: Use swap macro in update_max_tr
  softirq: Reorder trace_softirqs_on to prevent lockdep splat
  tracing: Check for no filter when processing event filters

Make sure that RQF_TIMED_OUT is cleared when a request is reused
after a block driver timeout handler has returned BLK_EH_DONE.

Fixes: da661267 ("blk-mq: don't time out requests again that are in the timeout handler")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Andrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull powerpc fixes from Michael Ellerman:

 - a fix for hugetlb with 4K pages, broken by our recent changes for
   split PMD PTL.

 - set the correct assembler machine type on e500mc, needed since
   binutils 2.26 introduced two forms for the "wait" instruction.

 - a fix for potential missed TLB flushes with MADV_[FREE|DONTNEED] etc.
   and THP on Power9 Radix.

 - three fixes to try and make our panic handling more robust by hard
   disabling interrupts, and not marking stopped CPUs as offline because
   they haven't been properly offlined.

 - three other minor fixes.

Thanks to: Aneesh Kumar K.V, Michael Jeanson, Nicholas Piggin.

* tag 'powerpc-4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/hash/4k: Free hugetlb page table caches correctly.
  powerpc/64s/radix: Fix radix_kvm_prefetch_workaround paca access of not possible CPU
  powerpc/64s: Fix build failures with CONFIG_NMI_IPI=n
  powerpc/64: hard disable irqs on the panic()ing CPU
  powerpc: smp_send_stop do not offline stopped CPUs
  powerpc/64: hard disable irqs in panic_smp_self_stop
  powerpc/64s: Fix DT CPU features Power9 DD2.1 logic
  powerpc/64s/radix: Fix MADV_[FREE|DONTNEED] TLB flush miss problem with THP
  powerpc/e500mc: Set assembler machine type to e500mc

Pull arm64 fixes from Catalin Marinas:

 - clear buffers allocated with FORCE_CONTIGUOUS explicitly until the
   CMA code honours __GFP_ZERO

 - notrace annotation for secondary_start_kernel()

 - use early_param() instead of __setup() for "kpti=" as it is needed
   for the cpufeature callback remapping swapper to non-global mappings

 - ensure writes to swapper are ordered wrt subsequent cache maintenance
   in the kpti non-global remapping code

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: Ensure writes to swapper are ordered wrt subsequent cache maintenance
  arm64: kpti: Use early_param for kpti= command-line option
  arm64: make secondary_start_kernel() notrace
  arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - Lazy FPSIMD switching fixes
   - Really disable compat ioctls on architectures that don't want it
   - Disable compat on arm64 (it was never implemented...)
   - Rely on architectural requirements for GICV on GICv3
   - Detect bad alignments in unmap_stage2_range

  x86:
   - Add nested VM entry checks to avoid broken error recovery path
   - Minor documentation fix"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: fix KVM_CAP_HYPERV_TLBFLUSH paragraph number
  kvm: vmx: Nested VM-entry prereqs for event inj.
  KVM: arm64: Prevent KVM_COMPAT from being selected
  KVM: Enforce error in ioctl for compat tasks when !KVM_COMPAT
  KVM: arm/arm64: add WARN_ON if size is not PAGE_SIZE aligned in unmap_stage2_range
  KVM: arm64: Avoid mistaken attempts to save SVE state for vcpus
  KVM: arm64/sve: Fix SVE trap restoration for non-current tasks
  KVM: arm64: Don't mask softirq with IRQs disabled in vcpu_put()
  arm64: Introduce sysreg_clear_set()
  KVM: arm/arm64: Drop resource size check for GICV window

Pull xen fixes from Juergen Gross:
 "This contains the following fixes/cleanups:

   - the removal of a BUG_ON() which wasn't necessary and which could
     trigger now due to a recent change

   - a correction of a long standing bug happening very rarely in Xen
     dom0 when a hypercall buffer from user land was not accessible by
     the hypervisor for very short periods of time due to e.g. page
     migration or compaction

   - usage of EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() in a
     Xen-related driver (no breakage possible as using those symbols
     without others already exported via EXPORT-SYMBOL_GPL() wouldn't
     make any sense)

   - a simplification for Xen PVH or Xen ARM guests

   - some additional error handling for callers of xenbus_printf()"

* tag 'for-linus-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Remove unnecessary BUG_ON from __unbind_from_irq()
  xen: add new hypercall buffer mapping device
  xen/scsiback: add error handling for xenbus_printf
  scsi: xen-scsifront: add error handling for xenbus_printf
  xen/grant-table: Export gnttab_{alloc|free}_pages as GPL
  xen: add error handling for xenbus_printf
  xen: share start flags between PV and PVH

syzbot is reporting NULL pointer dereference at wb_workfn() [1] due to
wb->bdi->dev being NULL. And Dmitry confirmed that wb->state was
WB_shutting_down after wb->bdi->dev became NULL. This indicates that
unregister_bdi() failed to call wb_shutdown() on one of wb objects.

The problem is in cgwb_bdi_unregister() which does cgwb_kill() and thus
drops bdi's reference to wb structures before going through the list of
wbs again and calling wb_shutdown() on each of them. This way the loop
iterating through all wbs can easily miss a wb if that wb has already
passed through cgwb_remove_from_bdi_list() called from wb_shutdown()
from cgwb_release_workfn() and as a result fully shutdown bdi although
wb_workfn() for this wb structure is still running. In fact there are
also other ways cgwb_bdi_unregister() can race with
cgwb_release_workfn() leading e.g. to use-after-free issues:

CPU1                            CPU2
                                cgwb_bdi_unregister()
                                  cgwb_kill(*slot);

cgwb_release()
  queue_work(cgwb_release_wq, &wb->release_work);
cgwb_release_workfn()
                                  wb = list_first_entry(&bdi->wb_list, ...)
                                  spin_unlock_irq(&cgwb_lock);
  wb_shutdown(wb);
  ...
  kfree_rcu(wb, rcu);
                                  wb_shutdown(wb); -> oops use-after-free

We solve these issues by synchronizing writeback structure shutdown from
cgwb_bdi_unregister() with cgwb_release_workfn() using a new mutex. That
way we also no longer need synchronization using WB_shutting_down as the
mutex provides it for CONFIG_CGROUP_WRITEBACK case and without
CONFIG_CGROUP_WRITEBACK wb_shutdown() can be called only once from
bdi_unregister().
Reported-by: syzbot <syzbot+4a7438e774b21ddd8eca@syzkaller.appspotmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When rewriting swapper using nG mappings, we must performance cache
maintenance around each page table access in order to avoid coherency
problems with the host's cacheable alias under KVM. To ensure correct
ordering of the maintenance with respect to Device memory accesses made
with the Stage-1 MMU disabled, DMBs need to be added between the
maintenance and the corresponding memory access.

This patch adds a missing DMB between writing a new page table entry and
performing a clean+invalidate on the same line.

Fixes: f992b4df ("arm64: kpti: Add ->enable callback to remap swapper using nG mappings")
Cc: <stable@vger.kernel.org> # 4.16.x-
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We inspect __kpti_forced early on as part of the cpufeature enable
callback which remaps the swapper page table using non-global entries.

Ensure that __kpti_forced has been updated to reflect the kpti=
command-line option before we start using it.

Fixes: ea1e3de8 ("arm64: entry: Add fake CPU feature for unmapping the kernel at EL0")
Cc: <stable@vger.kernel.org> # 4.16.x-
Reported-by: Wei Xu <xuwei5@hisilicon.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

KVM_CAP_HYPERV_TLBFLUSH collided with KVM_CAP_S390_PSW-BPB, its paragraph
number should now be 8.18.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

This patch extends the checks done prior to a nested VM entry.
Specifically, it extends the check_vmentry_prereqs function with checks
for fields relevant to the VM-entry event injection information, as
described in the Intel SDM, volume 3.

This patch is motivated by a syzkaller bug, where a bad VM-entry
interruption information field is generated in the VMCS02, which causes
the nested VM launch to fail. Then, KVM fails to resume L1.

While KVM should be improved to correctly resume L1 execution after a
failed nested launch, this change is justified because the existing code
to resume L1 is flaky/ad-hoc and the test coverage for resuming L1 is
sparse.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Marc Orr <marcorr@google.com>
[Removed comment whose parts were describing previous revisions and the
 rest was obvious from function/variable naming. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Pull NVMe fixes from Christoph:

"Various relatively small fixes, mostly to fix error handling of various
 sorts."

* 'nvme-4.18' of git://git.infradead.org/nvme:
  nvme-pci: limit max IO size and segments to avoid high order allocations
  nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl
  nvme-fc: release io queues to allow fast fail
  nvmet: reset keep alive timer in controller enable
  nvme-rdma: don't override opts->queue_size
  nvme-rdma: Fix command completion race at error recovery
  nvme-rdma: fix possible free of a non-allocated async event buffer
  nvme-rdma: fix possible double free condition when failing to create a controller

KVM/arm fixes for 4.18, take #1

- Lazy FPSIMD switching fixes
- Really disable compat ioctls on architectures that don't want it
- Disable compat on arm64 (it was never implemented...)
- Rely on architectural requirements for GICV on GICv3
- Detect bad alignments in unmap_stage2_range

Pull udf, quota, ext2 fixes from Jan Kara:
 "UDF:
   - fix an oops due to corrupted disk image
   - two small cleanups

  quota:
   - a fixfor lru handling
   - cleanup

  ext2:
   - a warning about a deprecated mount option"

* tag 'for_v4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Drop unused arguments of udf_delete_aext()
  udf: Provide function for calculating dir entry length
  udf: Detect incorrect directory size
  ext2: add warning when specifying nocheck option
  quota: Cleanup list iteration in dqcache_shrink_scan()
  quota: reclaim least recently used dquots

Commit 910f8bef ("xen/pirq: fix error path cleanup when binding
MSIs") fixed a couple of errors in error cleanup path of
xen_bind_pirq_msi_to_irq(). This cleanup allowed a call to
__unbind_from_irq() with an unbound irq, which would result in
triggering the BUG_ON there.

Since there is really no reason for the BUG_ON (xen_free_irq() can
operate on unbound irqs) we can remove it.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

For passing arbitrary data from user land to the Xen hypervisor the
Xen tools today are using mlock()ed buffers. Unfortunately the kernel
might change access rights of such buffers for brief periods of time
e.g. for page migration or compaction, leading to access faults in the
hypervisor, as the hypervisor can't use the locks of the kernel.

In order to solve this problem add a new device node to the Xen privcmd
driver to easily allocate hypercall buffers via mmap(). The memory is
allocated in the kernel and just mapped into user space. Marked as
VM_IO the user mapping will not be subject to page migration et al.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Pull drm fixes from Dave Airlie:
 "Just run of the mill fixes,

  core:
   - regression fix in device unplug

  qxl:
   - regression fix for might sleep in cursor handling

  nouveau:
   - regression fix in multi-screen cursor handling

  amdgpu:
   - switch off DC by default on Kaveri and older
   - some minor fixes

  i915:
   - some GEM regression fixes
   - doublescan mode fixes

  sun4i:
   - revert fix for a regression

  sii8620 bridge:
   - misc fixes"

* tag 'drm-fixes-2018-06-22' of git://anongit.freedesktop.org/drm/drm: (28 commits)
  drm/bridge/sii8620: fix display of packed pixel modes in MHL2
  drm/amdgpu: Make amdgpu_vram_mgr_bo_invisible_size always accurate
  drm/amdgpu: Refactor amdgpu_vram_mgr_bo_invisible_size helper
  drm/amdgpu: Update pin_size values before unpinning BO
  drm/amdgpu:All UVD instances share one idle_work handle
  drm/amdgpu: Don't default to DC support for Kaveri and older
  drm/amdgpu: Use kvmalloc_array for allocating VRAM manager nodes array
  drm/amd/pp: Fix uninitialized variable
  drm/i915: Enable provoking vertex fix on Gen9 systems.
  drm/i915: Fix context ban and hang accounting for client
  drm/i915: Turn off g4x DP port in .post_disable()
  drm/i915: Disallow interlaced modes on g4x DP outputs
  drm/i915: Fix PIPESTAT irq ack on i965/g4x
  drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSI
  drm/i915/execlists: Avoid putting the error pointer
  drm/i915: Apply batch location restrictions before pinning
  drm/nouveau/kms/nv50-: cursors always use core channel vram ctxdma
  Revert "drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGE"
  drm/atmel-hlcdc: check stride values in the first plane
  drm/bridge/sii8620: fix HDMI cable connection to dongle
  ...

Fixes for v4.18-rc2:
- A reversion of a commit in drm/sun4i to fix a run-time fault.
- Various fixes to the sii8620 bridge.
- Small bugfix to correctly check stride in atmel-hlcdc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com

Merge tag 'drm-intel-fixes-2018-06-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v4.18-rc2:
- Mostly cc: stable display fixes, including a DBLSCAN regression fix
- GEM fixes for this merge window
Signed-off-by: Dave Airlie <airlied@redhat.com>

Link: https://patchwork.freedesktop.org/patch/msgid/87d0wkuypy.fsf@intel.com

Pull NFS client bugfixes from Trond Myklebust:
 "Hightlights include:

   - fix an rcu deadlock in nfs_delegation_find_inode()

   - fix NFSv4 deadlocks due to not freeing the session slot in
     layoutget

   - don't send layoutreturn if the layout is already invalid

   - prevent duplicate XID allocation

   - flexfiles: Don't tie up all the rpciod threads in resends"

* tag 'nfs-for-4.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  pNFS/flexfiles: Process writeback resends from nfsiod context as well
  pNFS/flexfiles: Don't tie up all the rpciod threads in resends
  sunrpc: Prevent duplicate XID allocation
  pNFS: Don't send layoutreturn if the layout is already invalid
  pNFS: Always free the session slot on error in nfs4_layoutget_handle_exception
  NFS: Fix an rcu deadlock in nfs_delegation_find_inode()

Pull pin control fixes from Linus Walleij:
 "Some fallout in the pin control subsystem in the first week after the
  merge window, some minor fixes so I'd like to get it to you ASAP.

   - fix a serious kernel panic on the Mediatek driver with the external
     interrupt controller.

   - fix an uninitialized compiler warning in the owl (actions) driver.

   - allocation failure in the pinctrl-single driver.

   - pointer overwrite problem in the i.MX driver.

   - fix a small compiler warning"

* tag 'pinctrl-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mt7622: fix a kernel panic when pio don't work as EINT controller
  pinctrl: actions: Fix uninitialized error in owl_pin_config_set()
  pinctrl: single: Add allocation failure checking of saved_vals
  pinctrl: devicetree: Fix pctldev pointer overwrite
  pinctrl: mediatek: remove redundant return value check of platform_get_resource()

Merge tag 'hwmon-for-linus-v4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - fix a loop limit in nct6775 driver

 - disable fan support for Dell XPS13 9333

* tag 'hwmon-for-linus-v4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (nct6775) Fix loop limit
  hwmon: (dell-smm) Disable fan support for Dell XPS13 9333

Pull ACPI fixes from Rafael Wysocki:
 "These fix a suspend/resume regression in the ACPI driver for Intel
  SoCs (LPSS), add a new system wakeup quirk to the ACPI EC driver and
  fix an inline stub of a function in the ACPI processor driver that
  diverged from the original.

  Specifics:

   - Fix a suspend/resume regression in the ACPI driver for Intel SoCs
     (LPSS) to make it work on systems where some power management
     quirks should only be applied for runtime PM and suspend-to-idle
     and not for suspend-to-RAM (Rafael Wysocki).

   - Add a system wakeup quirk for Thinkpad X1 Carbon 6th to the ACPI EC
     driver to avoid drainig battery too fast while suspended to idle on
     those systems (Mika Westerberg).

   - Fix an inline stub of acpi_processor_ppc_has_changed() to match the
     original function definition (Brian Norris)"

* tag 'acpi-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / processor: Finish making acpi_processor_ppc_has_changed() void
  ACPI / EC: Use ec_no_wakeup on Thinkpad X1 Carbon 6th
  ACPI / LPSS: Avoid PM quirks on suspend and resume from S3

Pull power management updates from Rafael Wysocki:
 "These are mostly fixes, including some fixes for changes made during
  the recent merge window and some "stable" material, plus some minor
  extensions of the turbostat utility.

  Specifics:

   - Fix the PM core to avoid introducing a runtime PM usage counter
     imbalance when adding device links during driver probe (Rafael
     Wysocki).

   - Fix the operating performance points (OPP) framework to ensure that
     the regulator voltage is always updated as appropriate when
     updating clock rates (Waldemar Rymarkiewicz).

   - Fix the intel_pstate driver to use correct max/min limits for cores
     with differing maximum frequences (Srinivas Pandruvada).

   - Fix a typo in the intel_pstate driver documentation (Rafael
     Wysocki).

   - Fix two issues with the recently added Kryo cpufreq driver (Ilia
     Lin).

   - Fix two recent regressions and some other minor issues in the
     turbostat utility and extend it to provide some more diagnostic
     information (Len Brown, Nathan Ciobanu)"

* tag 'pm-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Documentation: intel_pstate: Fix typo
  tools/power turbostat: version 18.06.20
  tools/power turbostat: add the missing command line switches
  tools/power turbostat: add single character tokens to help
  tools/power turbostat: alphabetize the help output
  tools/power turbostat: fix segfault on 'no node' machines
  tools/power turbostat: add optional APIC X2APIC columns
  tools/power turbostat: decode cpuid.1.HT
  tools/power turbostat: fix show/hide issues resulting from mis-merge
  PM / OPP: Update voltage in case freq == old_freq
  cpufreq: intel_pstate: Fix scaling max/min limits with Turbo 3.0
  cpufreq: kryo: Add module remove and exit
  cpufreq: kryo: Fix possible error code dereference
  PM / core: Fix supplier device runtime PM usage counter imbalance

Non gcc-5 builds with CONFIG_STACK_VALIDATION=y and
SKIP_STACK_VALIDATION=1 fail.
Example output:
  /bin/sh: init/.tmp_main.o: Permission denied

commit 96f60dfa ("trace: Use -mcount-record for dynamic ftrace"),
added a mismatched endif.  This causes cmd_objtool to get mistakenly
set.

Relocate endif to balance the newly added -record-mcount check.

Link: http://lkml.kernel.org/r/20180608214746.136554-1-gthelen@google.com

Fixes: 96f60dfa ("trace: Use -mcount-record for dynamic ftrace")
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fix typos, inconsistencies in using quotes, incorrect section number,
etc. in the trace histogram documentation.

Link: http://lkml.kernel.org/r/20180614224859.55864-1-joel@joelfernandes.orgReviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Make use of the swap macro and remove unnecessary variable _buf_.
This makes the code easier to read and maintain. Also, reduces the
stack usage.

This code was detected with the help of Coccinelle.

Link: http://lkml.kernel.org/r/20180209175316.GA18720@embeddedgusSigned-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

I'm able to reproduce a lockdep splat with config options:
CONFIG_PROVE_LOCKING=y,
CONFIG_DEBUG_LOCK_ALLOC=y and
CONFIG_PREEMPTIRQ_EVENTS=y

$ echo 1 > /d/tracing/events/preemptirq/preempt_enable/enable

[   26.112609] DEBUG_LOCKS_WARN_ON(current->softirqs_enabled)
[   26.112636] WARNING: CPU: 0 PID: 118 at kernel/locking/lockdep.c:3854
[...]
[   26.144229] Call Trace:
[   26.144926]  <IRQ>
[   26.145506]  lock_acquire+0x55/0x1b0
[   26.146499]  ? __do_softirq+0x46f/0x4d9
[   26.147571]  ? __do_softirq+0x46f/0x4d9
[   26.148646]  trace_preempt_on+0x8f/0x240
[   26.149744]  ? trace_preempt_on+0x4d/0x240
[   26.150862]  ? __do_softirq+0x46f/0x4d9
[   26.151930]  preempt_count_sub+0x18a/0x1a0
[   26.152985]  __do_softirq+0x46f/0x4d9
[   26.153937]  irq_exit+0x68/0xe0
[   26.154755]  smp_apic_timer_interrupt+0x271/0x280
[   26.156056]  apic_timer_interrupt+0xf/0x20
[   26.157105]  </IRQ>

The issue was this:

preempt_count = 1 << SOFTIRQ_SHIFT

	__local_bh_enable(cnt = 1 << SOFTIRQ_SHIFT) {
		if (softirq_count() == (cnt && SOFTIRQ_MASK)) {
			trace_softirqs_on() {
				current->softirqs_enabled = 1;
			}
		}
		preempt_count_sub(cnt) {
			trace_preempt_on() {
				tracepoint() {
					rcu_read_lock_sched() {
						// jumps into lockdep

Where preempt_count still has softirqs disabled, but
current->softirqs_enabled is true, and we get a splat.

Link: http://lkml.kernel.org/r/20180607201143.247775-1-joel@joelfernandes.org

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Glexiner <tglx@linutronix.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Erick Reyes <erickreyes@google.com>
Cc: Julia Cartwright <julia@ni.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: d5915816 ("tracing: Add support for preempt and irq enable/disable events")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The syzkaller detected a out-of-bounds issue with the events filter code,
specifically here:

	prog[N].pred = NULL;					/* #13 */
	prog[N].target = 1;		/* TRUE */
	prog[N+1].pred = NULL;
	prog[N+1].target = 0;		/* FALSE */
->	prog[N-1].target = N;
	prog[N-1].when_to_branch = false;

As that's the first reference to a "N-1" index, it appears that the code got
here with N = 0, which means the filter parser found no filter to parse
(which shouldn't ever happen, but apparently it did).

Add a new error to the parsing code that will check to make sure that N is
not zero before going into this part of the code. If N = 0, then -EINVAL is
returned, and a error message is added to the filter.

Cc: stable@vger.kernel.org
Fixes: 80765597 ("tracing: Rewrite filter logic to be simpler and faster")
Reported-by: air icy <icytxw@gmail.com>
bugzilla url: https://bugzilla.kernel.org/show_bug.cgi?id=200019Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

nvme requires an sg table allocation for each request. If the request
is large, then the allocation can become quite large. For instance,
with our default software settings of 1280KB IO size, we'll need
10248 bytes of sg table. That turns into a 2nd order allocation,
which we can't always guarantee. If we fail the allocation, blk-mq
will retry it later. But there's no guarantee that we'll EVER be
able to allocate that much contigious memory.

Limit the IO size such that we never need more than a single page
of memory. That's a lot faster and more reliable. Then back that
allocation with a mempool, so that we know we'll always be able
to succeed the allocation at some point.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

There is very little point in trying to support the 32bit KVM/arm API
on arm64, and this was never an anticipated use case.

Let's make it clear by not selecting KVM_COMPAT.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

The current behaviour of the compat ioctls is a bit odd.
We provide a compat_ioctl method when KVM_COMPAT is set, and NULL
otherwise. But NULL means that the normal, non-compat ioctl should
be used directly for compat tasks, and there is no way to actually
prevent a compat task from issueing KVM ioctls.

This patch changes this behaviour, by always registering a compat_ioctl
method, even if KVM_COMPAT is not selected. In that case, the callback
will always return -EINVAL.

Fixes: de8e5d74 ("KVM: Disable compat ioctl for s390")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

There is race between nvme_remove and nvme_reset_work that can
lead to io hang.

nvme_remove                    nvme_reset_work
                               -> nvme_remove_dead_ctrl
                                 -> nvme_dev_disable
                                   -> quiesce request_queue
                                 -> queue remove_work
-> cancel_work_sync reset_work
-> nvme_remove_namespaces
  -> splice ctrl->namespaces
                               nvme_remove_dead_ctrl_work
                               -> nvme_kill_queues
  -> nvme_ns_remove               do nothing
    -> blk_cleanup_queue
      -> blk_freeze_queue

Finally, the request_queue is quiesced state when wait freeze,
we will get io hang here. To fix it, move the nvme_kill_queues
from nvme_remove_dead_ctrl_work to nvme_remove_dead_ctrl.
Suggested-by: Keith Busch <keith.busch@linux.intel.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

These are a stable-candidate suspend/resume fix of the ACPI driver for
Intel SoCs (LPSS) and an inline stub fix for the ACPI processor driver.

* acpi-soc:
  ACPI / LPSS: Avoid PM quirks on suspend and resume from S3

* acpi-processor:
  ACPI / processor: Finish making acpi_processor_ppc_has_changed() void

These are turbostat utility updates for 4.18-rc2 including two fixes
for recent regressions and some minor extensions.

* pm-tools:
  tools/power turbostat: version 18.06.20
  tools/power turbostat: add the missing command line switches
  tools/power turbostat: add single character tokens to help
  tools/power turbostat: alphabetize the help output
  tools/power turbostat: fix segfault on 'no node' machines
  tools/power turbostat: add optional APIC X2APIC columns
  tools/power turbostat: decode cpuid.1.HT
  tools/power turbostat: fix show/hide issues resulting from mis-merge