- 16 Aug, 2012 3 commits
-
-
Mathias Krause authored
The HCI code fails to initialize the two padding bytes of struct hci_ufilter before copying it to userland -- that for leaking two bytes kernel stack. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mathias Krause authored
The ATM code fails to initialize the two padding bytes of struct sockaddr_atmpvc inserted for alignment. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by:
-
Mathias Krause authored
The ATM code fails to initialize the two padding bytes of struct sockaddr_atmpvc inserted for alignment. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by:
-
- 15 Aug, 2012 6 commits
-
-
Steve Hodgson authored
dev_open() can complete before register_netdev() returns. Fix vmxnet3_probe_device() to support this. Signed-off-by:
Steve Hodgson <steve@purestorage.com> Signed-off-by:
-
Stephen Hemminger authored
Alternative solution for problem found by Linux Driver Verification project (linuxtesting.org). As it noted in the comment before the br_handle_frame_finish function, this function should be called under rcu_read_lock. The problem callgraph: br_dev_xmit -> br_nf_pre_routing_finish_bridge_slow -> -> br_handle_frame_finish -> br_port_get_rcu -> rcu_dereference And in this case there is no read-lock section. Reported-by:
Denis Efremov <yefremov.denis@gmail.com> Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== Alexey Khoroshilov provides a potential memory leak in rndis_wlan. Bob Copeland gives us an ath5k fix for a lockdep problem. Dan Carpenter fixes a signedness mismatch in at76c50x. Felix Fietkau corrects a regression caused by an earlier commit that can lead to an IRQ storm. Lorenzo Bianconi offers a fix for a bad variable initialization in ath9k that can cause it to improperly mark decrypted frames. Rajkumar Manoharan fixes ath9k to prevent the btcoex time from running when the hardware is asleep. The remainder are Bluetooth fixes, about which Gustavo says: "Here goes some fixes for 3.6-rc1, there are a few fix to thte inquiry code by Ram Malovany, support for 2 new devices, and few others fixes for NULL dereference, possible deadlock and a memory leak." ==================== Signed-off-by: -
Ben Hutchings authored
Cong Wang reports that lockdep detected suspicious RCU usage while enabling IPV6 forwarding: [ 1123.310275] =============================== [ 1123.442202] [ INFO: suspicious RCU usage. ] [ 1123.558207] 3.6.0-rc1+ #109 Not tainted [ 1123.665204] ------------------------------- [ 1123.768254] include/linux/rcupdate.h:430 Illegal context switch in RCU read-side critical section! [ 1123.992320] [ 1123.992320] other info that might help us debug this: [ 1123.992320] [ 1124.307382] [ 1124.307382] rcu_scheduler_active = 1, debug_locks = 0 [ 1124.522220] 2 locks held by sysctl/5710: [ 1124.648364] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81768498>] rtnl_trylock+0x15/0x17 [ 1124.882211] #1: (rcu_read_lock){.+.+.+}, at: [<ffffffff81871df8>] rcu_lock_acquire+0x0/0x29 [ 1125.085209] [ 1125.085209] stack backtrace: [ 1125.332213] Pid: 5710, comm: sysctl Not tainted 3.6.0-rc1+ #109 [ 1125.441291] Call Trace: [ 1125.545281] [<ffffffff8109d915>] lockdep_rcu_suspicious+0x109/0x112 [ 1125.667212] [<ffffffff8107c240>] rcu_preempt_sleep_check+0x45/0x47 [ 1125.781838] [<ffffffff8107c260>] __might_sleep+0x1e/0x19b [...] [ 1127.445223] [<ffffffff81757ac5>] call_netdevice_notifiers+0x4a/0x4f [...] [ 1127.772188] [<ffffffff8175e125>] dev_disable_lro+0x32/0x6b [ 1127.885174] [<ffffffff81872d26>] dev_forward_change+0x30/0xcb [ 1128.013214] [<ffffffff818738c4>] addrconf_forward_change+0x85/0xc5 [...] addrconf_forward_change() uses RCU iteration over the netdev list, which is unnecessary since it already holds the RTNL lock. We also cannot reasonably require netdevice notifier functions not to sleep. Reported-by:Cong Wang <amwang@redhat.com> Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Julia Lawall authored
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by:
-
- 14 Aug, 2012 29 commits
-
-
Julia Lawall authored
If the NULL test is necessary, the initialization involving a dereference of the tested value should be moved after the NULL test. The sematic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by:
-
Ben Hutchings authored
When registering the handlers, any state they rely on must be completely initialised first. When unregistering, we must wait until they are definitely no longer running. llc_rcv() must also avoid reading the handler pointers again after checking for NULL. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
Otherwise the station packet handler will remain registered even though the module is unloaded. Signed-off-by:
-
Ben Hutchings authored
llc_station_init() creates and processes an event skb with no effect other than to change the state from DOWN to UP. Allocation failure is reported, but then ignored by its caller, llc2_init(). Remove this possibility by simply initialising the state as UP. Signed-off-by:
-
Igor Maravic authored
Fix error handling in case making of dir dev_snmp6 failes Signed-off-by:
Igor Maravic <igorm@etf.rs> Signed-off-by:
-
Yan, Zheng authored
Commit caacf05e causes big drop of UDP loop back performance. The cause of the regression is that we do not cache the local output routes. Each time we send a datagram from unconnected UDP socket, the kernel allocates a dst_entry and adds it to the rt_uncached_list. It creates lock contention on the rt_uncached_lock. Reported-by:
Alex Shi <alex.shi@intel.com> Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by:
-
Bjørn Mork authored
Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
Take advantage of the matching macros to make the device id list easier to read and maintain. Signed-off-by:
-
Bjørn Mork authored
Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by:
-
Bjørn Mork authored
This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by:
-
Dirk Gouders authored
There are at least 4 implementations of netcat with the BSD-based being the only one that has to be used without the -p switch to specify the listening port. Jan Engelhardt suggested to add an example for socat(1). Signed-off-by:
Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de> Signed-off-by:
-
Amerigo Wang authored
napi->poll() needs IRQ enabled, so we have to re-enable IRQ before calling it. Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Amerigo Wang authored
Without this patch, I can't get netconsole logs remotely over vlan. The reason is probably we don't handle vlan tags in either netpoll tx or rx path. I am not sure if I use these vlan functions correctly, at least this patch works. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Amerigo Wang authored
Clean up vlan_dev_hard_start_xmit() function. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Amerigo Wang authored
To be consistent, s/info/vlan/. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Amerigo Wang authored
These functions are just boolean, let them return bool instead of int. Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Amerigo Wang authored
Although this doesn't matter actually, because netpoll_tx_running() doesn't use the parameter, the code will be more readable. For team_dev_queue_xmit() we have to move it down to avoid compile errors. Cc: David Miller <davem@davemloft.net> Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Amerigo Wang authored
We don't delete 'p' from the list in the loop, so we can just use list_for_each_entry(). Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Amerigo Wang authored
Add comments on why we don't notify NETDEV_RELEASE. Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Amerigo Wang authored
This patch fixes several problems in the call path of netpoll_send_skb_on_dev(): 1. Disable IRQ's before calling netpoll_send_skb_on_dev(). 2. All the callees of netpoll_send_skb_on_dev() should use rcu_dereference_bh() to dereference ->npinfo. 3. Rename arp_reply() to netpoll_arp_reply(), the former is too generic. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Amerigo Wang authored
The logic of the code is same, just call netpoll_rx_on(). Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Amerigo Wang authored
In __netpoll_rx(), it dereferences ->npinfo without rcu_dereference_bh(), this patch fixes it by using the 'npinfo' passed from netpoll_rx() where it is already dereferenced with rcu_dereference_bh(). Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Amerigo Wang authored
With the previous patch applied, __netpoll_cleanup() is non-block now, so we don't need to release the spin_lock before calling it. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Amerigo Wang authored
Like the previous patch, slave_disable_netpoll() and __netpoll_cleanup() may be called with read_lock() held too, so we should make them non-block, by moving the cleanup and kfree() to call_rcu_bh() callbacks. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
-
Amerigo Wang authored
slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 patches from Martin Schwidefsky: "Included are bug fixes and a patch to enable system call filtering with BPF." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/compat: fix mmap compat system calls s390/compat: fix compat wrappers for process_vm system calls s390: do not clobber personality flags in sys_32_personality() s390/seccomp: add support for system call filtering using BPF s390/sclp_sdias: Add missing break and "fall through" s390/mm: remove MAX_PHYSADDR_BITS define
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Radeon and intel fixes mostly, one fix to the mgag200 driver to not hang on certain server variants." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits) drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios drm/mgag200: fix G200ER pll picking algorithm drm/edid: Fix potential memory leak in edid_load() drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/radeon/kms: allow "invalid" DB formats as a means to disable DB ...
-
Arnd Bergmann authored
Commit 72121572 ("GPIO: gpio-pxa: fix devicetree functions") added an "xlate" function pointer to the irq_domain_ops, but this function is nor declared or defined anywhere when CONFIG_OF is disabled, causing the build error: drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function) Extending the DT-only code section to cover the irq_domain_ops and the pxa_gpio_dt_ids solves this problem and makes it clearer which code is actually used without DT. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 13 Aug, 2012 2 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Alex Deucher writes: This is the current set of radeon fixes for 3.6. Nothing too major. Highlights: - various display fixes - some SI fixes - new SI pci ids - major VM fix - CS checker support for MSAA I've tested on a number of cards across generations and noticed no problems. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix typo in function header comment drm/radeon/kms: implement timestamp userspace query (v2) drm/radeon/kms: add MSAA texture support for r600-evergreen drm/radeon/kms: reorder code in r600_check_texture_resource drm/radeon: fence virtual address and free it once idle v4 drm/radeon: fix some missing parens in asic macros drm/radeon: add some new SI pci ids drm/radeon: fix ordering in pll picking on dce4+ drm/radeon: do not reenable crtc after moving vram start address drm/radeon: fix bank tiling parameters on cayman drm/radeon: fix bank tiling parameters on evergreen drm/radeon: fix bank tiling parameters on SI drm/radeon: properly handle crtc powergating drm/radeon: properly handle SS overrides on TN (v2) drm/radeon/dce4+: set a more reasonable cursor watermark drm/radeon: fix handling for ddc type 5 on combios
-
Bob Copeland authored
Lockdep found an inconsistent lock state when joining a mesh with ath5k. The problem is that ath5k takes the lock for its beacon state, ah->block, with spin_lock_irqsave(), while mesh internally takes the sync_offset_lock with spin_lock_bh() in mesh_sync_offset_adjust_tbtt(), which in turn is called under ah->block. This could deadlock if the beacon tasklet was run on the processor that held the beacon lock during the do_softirq() in spin_unlock_bh(). We probably shouldn't hold the lock around the callbacks, but the easiest fix is to switch to spin_lock_bh for ah->block: it doesn't need interrupts disabled anyway as the data in question is only accessed in softirq or process context. Fixes the following lockdep warning: [ 446.892304] WARNING: at kernel/softirq.c:159 _local_bh_enable_ip+0x38/0xa6() [ 446.892306] Hardware name: MacBook1,1 [ 446.892309] Modules linked in: tcp_lp fuse sunrpc cpufreq_ondemand acpi_cpufreq mperf ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 nf_conntrack_ipv4 ip6table_filter nf_defrag_ipv4 xt_state nf_conntrack ip6_tables ext2 arc4 btusb bluetooth snd_hda_codec_idt snd_hda_intel carl9170 snd_hda_codec coretemp joydev ath5k snd_hwdep snd_seq isight_firmware ath snd_seq_device snd_pcm applesmc appletouch mac80211 input_polldev snd_timer microcode cfg80211 snd lpc_ich pcspkr i2c_i801 mfd_core soundcore rfkill snd_page_alloc sky2 tpm_infineon virtio_net kvm_intel kvm i915 drm_kms_helper drm i2c_algo_bit i2c_core video [ 446.892385] Pid: 1892, comm: iw Not tainted 3.6.0-rc1-wl+ #296 [ 446.892387] Call Trace: [ 446.892394] [<c0432958>] warn_slowpath_common+0x7c/0x91 [ 446.892398] [<c04399d7>] ? _local_bh_enable_ip+0x38/0xa6 [ 446.892403] [<c04399d7>] ? _local_bh_enable_ip+0x38/0xa6 [ 446.892459] [<f7f9ae3b>] ? mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 446.892464] [<c043298f>] warn_slowpath_null+0x22/0x24 [ 446.892468] [<c04399d7>] _local_bh_enable_ip+0x38/0xa6 [ 446.892473] [<c0439a52>] local_bh_enable_ip+0xd/0xf [ 446.892479] [<c088004f>] _raw_spin_unlock_bh+0x34/0x37 [ 446.892527] [<f7f9ae3b>] mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 446.892569] [<f7f7650f>] ieee80211_beacon_get_tim+0x28f/0x4e0 [mac80211] [ 446.892575] [<c047ceeb>] ? trace_hardirqs_on_caller+0x10e/0x13f [ 446.892591] [<f7fdc541>] ath5k_beacon_update+0x40/0x26b [ath5k] [ 446.892597] [<c047ad67>] ? lock_acquired+0x1f5/0x21e [ 446.892612] [<f7fdf9fb>] ? ath5k_bss_info_changed+0x167/0x1b2 [ath5k] [ 446.892617] [<c087f9ea>] ? _raw_spin_lock_irqsave+0x78/0x82 [ 446.892632] [<f7fdf9fb>] ? ath5k_bss_info_changed+0x167/0x1b2 [ath5k] [ 446.892647] [<f7fdfa09>] ath5k_bss_info_changed+0x175/0x1b2 [ath5k] [ 446.892651] [<c0479dd4>] ? lock_is_held+0x73/0x7b [ 446.892662] [<c0458fd5>] ? __might_sleep+0xa7/0x17a [ 446.892698] [<f7f5d8f7>] ieee80211_bss_info_change_notify+0x1ed/0x21a [mac80211] [ 446.892703] [<c0449875>] ? queue_work+0x24/0x32 [ 446.892718] [<f7fdf894>] ? ath5k_configure_filter+0x163/0x163 [ath5k] [ 446.892766] [<f7f95fa4>] ieee80211_start_mesh+0xb9/0xbd [mac80211] [ 446.892806] [<f7f6e610>] ieee80211_join_mesh+0x10c/0x116 [mac80211] [ 446.892834] [<f7a96b90>] __cfg80211_join_mesh+0x176/0x1b3 [cfg80211] [ 446.892855] [<f7a96c1c>] cfg80211_join_mesh+0x4f/0x6a [cfg80211] [ 446.892875] [<f7a89891>] nl80211_join_mesh+0x1de/0x1ed [cfg80211] [ 446.892908] [<f7a8db99>] ? nl80211_set_wiphy+0x4cf/0x4cf [cfg80211] [ 446.892919] [<c07cfa36>] genl_rcv_msg+0x1d5/0x1f3 [ 446.892940] [<c07cf861>] ? genl_rcv+0x25/0x25 [ 446.892946] [<c07cf009>] netlink_rcv_skb+0x37/0x78 [ 446.892950] [<c07cf85a>] genl_rcv+0x1e/0x25 [ 446.892955] [<c07cebf3>] netlink_unicast+0xc3/0x12d [ 446.892959] [<c07cee46>] netlink_sendmsg+0x1e9/0x213 [ 446.892966] [<c079f282>] sock_sendmsg+0x79/0x96 [ 446.892972] [<c04eb90d>] ? might_fault+0x9d/0xa3 [ 446.892978] [<c07a81d8>] ? copy_from_user+0x8/0xa [ 446.892983] [<c07a852c>] ? verify_iovec+0x43/0x77 [ 446.892987] [<c079f4d8>] __sys_sendmsg+0x180/0x215 [ 446.892993] [<c045f107>] ? sched_clock_cpu+0x134/0x144 [ 446.892997] [<c047992f>] ? trace_hardirqs_off+0xb/0xd [ 446.893002] [<c047bf88>] ? __lock_acquire+0x46b/0xb6e [ 446.893006] [<c047992f>] ? trace_hardirqs_off+0xb/0xd [ 446.893010] [<c045f149>] ? local_clock+0x32/0x49 [ 446.893015] [<c0479ec1>] ? lock_release_holdtime.part.9+0x4b/0x51 [ 446.893020] [<c0479dd4>] ? lock_is_held+0x73/0x7b [ 446.893025] [<c050d127>] ? fcheck_files+0x97/0xcd [ 446.893029] [<c050d4df>] ? fget_light+0x2d/0x81 [ 446.893034] [<c07a01f3>] sys_sendmsg+0x3b/0x52 [ 446.893038] [<c07a07b4>] sys_socketcall+0x238/0x2a2 [ 446.893044] [<c0885edf>] sysenter_do_call+0x12/0x38 [ 446.893047] ---[ end trace a9af5998f929270f ]--- [ 447.627222] [ 447.627232] ================================= [ 447.627237] [ INFO: inconsistent lock state ] [ 447.627244] 3.6.0-rc1-wl+ #296 Tainted: G W [ 447.627248] --------------------------------- [ 447.627253] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 447.627260] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 447.627264] (&(&ah->block)->rlock){+.?...}, at: [<f7fdd2d1>] ath5k_tasklet_beacon+0x91/0xa7 [ath5k] [ 447.627299] {SOFTIRQ-ON-W} state was registered at: [ 447.627304] [<c047cdbf>] mark_held_locks+0x59/0x77 [ 447.627316] [<c047ceeb>] trace_hardirqs_on_caller+0x10e/0x13f [ 447.627324] [<c047cf27>] trace_hardirqs_on+0xb/0xd [ 447.627332] [<c0439a3d>] _local_bh_enable_ip+0x9e/0xa6 [ 447.627342] [<c0439a52>] local_bh_enable_ip+0xd/0xf [ 447.627349] [<c088004f>] _raw_spin_unlock_bh+0x34/0x37 [ 447.627359] [<f7f9ae3b>] mesh_sync_offset_adjust_tbtt+0x95/0x99 [mac80211] [ 447.627451] [<f7f7650f>] ieee80211_beacon_get_tim+0x28f/0x4e0 [mac80211] [ 447.627526] [<f7fdc541>] ath5k_beacon_update+0x40/0x26b [ath5k] [ 447.627547] [<f7fdfa09>] ath5k_bss_info_changed+0x175/0x1b2 [ath5k] [ 447.627569] [<f7f5d8f7>] ieee80211_bss_info_change_notify+0x1ed/0x21a [mac80211] [ 447.627628] [<f7f95fa4>] ieee80211_start_mesh+0xb9/0xbd [mac80211] [ 447.627712] [<f7f6e610>] ieee80211_join_mesh+0x10c/0x116 [mac80211] [ 447.627782] [<f7a96b90>] __cfg80211_join_mesh+0x176/0x1b3 [cfg80211] [ 447.627816] [<f7a96c1c>] cfg80211_join_mesh+0x4f/0x6a [cfg80211] [ 447.627845] [<f7a89891>] nl80211_join_mesh+0x1de/0x1ed [cfg80211] [ 447.627872] [<c07cfa36>] genl_rcv_msg+0x1d5/0x1f3 [ 447.627881] [<c07cf009>] netlink_rcv_skb+0x37/0x78 [ 447.627891] [<c07cf85a>] genl_rcv+0x1e/0x25 [ 447.627898] [<c07cebf3>] netlink_unicast+0xc3/0x12d [ 447.627907] [<c07cee46>] netlink_sendmsg+0x1e9/0x213 [ 447.627915] [<c079f282>] sock_sendmsg+0x79/0x96 [ 447.627926] [<c079f4d8>] __sys_sendmsg+0x180/0x215 [ 447.627934] [<c07a01f3>] sys_sendmsg+0x3b/0x52 [ 447.627941] [<c07a07b4>] sys_socketcall+0x238/0x2a2 [ 447.627949] [<c0885edf>] sysenter_do_call+0x12/0x38 [ 447.627959] irq event stamp: 1929200 [ 447.627963] hardirqs last enabled at (1929200): [<c043a0e9>] tasklet_hi_action+0x3e/0xbf [ 447.627972] hardirqs last disabled at (1929199): [<c043a0c0>] tasklet_hi_action+0x15/0xbf [ 447.627981] softirqs last enabled at (1929196): [<c043999d>] _local_bh_enable+0x12/0x14 [ 447.627989] softirqs last disabled at (1929197): [<c040443b>] do_softirq+0x63/0xb8 [ 447.627999] [ 447.627999] other info that might help us debug this: [ 447.628004] Possible unsafe locking scenario: [ 447.628004] [ 447.628009] CPU0 [ 447.628012] ---- [ 447.628016] lock(&(&ah->block)->rlock); [ 447.628023] <Interrupt> [ 447.628027] lock(&(&ah->block)->rlock); [ 447.628034] [ 447.628034] *** DEADLOCK *** Signed-off-by:Bob Copeland <me@bobcopeland.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
