- 11 Nov, 2015 40 commits
-
-
Hauke Mehrtens authored
This adds the PUM bits for USB and SDIO devices Signed-off-by:
Hauke Mehrtens <hauke.mehrtens@lantiq.com> Acked-by:
John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11387/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Hauke Mehrtens authored
When the SoC starts up most of the devices should be deactivated by the PMU, they should be activated when they get used by their drivers. Some devices should not get deactivate at startup like the serial, register them in a special way. Signed-off-by:
-
Hauke Mehrtens authored
This add detection of some clocks on the ar10 and grx390. Signed-off-by:
-
Hauke Mehrtens authored
The vendor code uses different clock values for this clock. Signed-off-by:
-
Hauke Mehrtens authored
This register is also used on other SoCs. Signed-off-by:
-
Hauke Mehrtens authored
This adds support for setting the PMU register on the AR10 and GRX390. Signed-off-by:
-
Hauke Mehrtens authored
The PMU register are accessed in a non atomic way and they could be accessed by different threads simultaneously, which could cause problems this patch adds locking around the PMU registers. In addition we now also wait till the PMU is actually deactivated. [ralf@linux-mips.org: Fix spelling mistake in commit message as noticed by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>.] Signed-off-by:
-
Rafał Miłecki authored
This drops another symbol dependency between setup.c and sprom.c which will allow us to make SPROM code a separated module (and share it with ARM). Patch tested on Linksys WRT300N V1. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11360/Signed-off-by:
-
Rafał Miłecki authored
There are still few left: 1) Most of them about lines over 80 chars (increased readability exception) 2) Wrong parsing of preprocessor macros Signed-off-by:
-
Rafał Miłecki authored
To support (extract) SPROM on Broadcom ARM devices we should separate SPROM code and make it a separated module. We won't want to export bcm47xx_fill_sprom symbol so we should support SoC SPROM in the standard fallback function and then modify ssb to use it. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11355/Signed-off-by:
-
Hauke Mehrtens authored
This adds a basic implementation of clk_round_rate() The clk_round_rate() function is called by multiple drivers and subsystems now and the lantiq clk driver is supposed to export this, but doesn't do so, this causes linking problems like this one: ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined! Signed-off-by:
-
Aaro Koskinen authored
Add LATENCYTOP support for MIPS. Tested on OCTEON. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11353/Signed-off-by:
-
Julia Lawall authored
for_each_child_of_node performs an of_node_get on each iteration, so no of_node_get is needed on breaking out of the loop when the device_node structure is saved in another variable. A simplified semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root; local idexpression child; @@ for_each_child_of_node(root, child) { ... * of_node_get(child) ... break; } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Cc: kernel-janitors@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jason Cooper <jason@lakedaemon.net> Patchwork: https://patchwork.linux-mips.org/patch/11357/Signed-off-by:
-
Alex Smith authored
Add user-mode implementations of gettimeofday() and clock_gettime() to the VDSO. This is currently usable with 2 clocksources: the CP0 count register, which is accessible to user-mode via RDHWR on R2 and later cores, or the MIPS Global Interrupt Controller (GIC) timer, which provides a "user-mode visible" section containing a mirror of its counter registers. This section must be mapped into user memory, which is done below the VDSO data page. When a supported clocksource is not in use, the VDSO functions will return -ENOSYS, which causes libc to fall back on the standard syscall path. When support for neither of these clocksources is compiled into the kernel at all, the VDSO still provides clock_gettime(), as the coarse realtime/monotonic clocks can still be implemented. However, gettimeofday() is not provided in this case as nothing can be done without a suitable clocksource. This causes the symbol lookup to fail in libc and it will then always use the standard syscall path. This patch includes a workaround for a bug in QEMU which results in RDHWR on the CP0 count register always returning a constant (incorrect) value. A fix for this has been submitted, and the workaround can be removed after the fix has been in stable releases for a reasonable amount of time. A simple performance test which calls gettimeofday() 1000 times in a loop and calculates the average execution time gives the following results on a Malta + I6400 (running at 20MHz): - Syscall: ~31000 ns - VDSO (GIC): ~15000 ns - VDSO (CP0): ~9500 ns [markos.chandras@imgtec.com: - Minor code re-arrangements in order for mappings to be made in the order they appear to the process' address space. - Move do_{monotonic, realtime} outside of the MIPS_CLOCK_VSYSCALL ifdef - Use gic_get_usm_range so we can do the GIC mapping in the arch/mips/kernel/vdso instead of the GIC irqchip driver] Signed-off-by:Alex Smith <alex.smith@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11338/Signed-off-by:
-
Alex Smith authored
The GIC provides a "user-mode visible" section containing a mirror of the counter registers which can be mapped into user memory. This will be used by the VDSO time function implementations, so provide a function to map it in. When the GIC is not enabled in Kconfig a dummy inline version of this function is provided, along with "#define gic_present 0", so that we don't have to litter the VDSO code with ifdefs. [markos.chandras@imgtec.com: - Move mapping code to arch/mips/kernel/vdso.c and use a resource type to get the GIC usermode information - Avoid renaming function arguments and use __gic_base_addr to hold the base GIC address prior to ioremap.] [ralf@linux-mips.org: Fix up gic_get_usm_range() to compile and make inline again.] Signed-off-by:Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/11281/Signed-off-by:
-
Alex Smith authored
Add an initial implementation of a proper (i.e. an ELF shared library) VDSO. With this commit it does not export any symbols, it only replaces the current signal return trampoline page. A later commit will add user implementations of gettimeofday()/clock_gettime(). To support both new toolchains and old ones which don't generate ABI flags section, we define its content manually and then use a tool (genvdso) to patch up the section to have the correct name and type. genvdso also extracts symbol offsets ({,rt_}sigreturn) needed by the kernel, and generates a C file containing a "struct mips_vdso_image" containing both the VDSO data and these offsets. This C file is compiled into the kernel. On 64-bit kernels we require a different VDSO for each supported ABI, so we may build up to 3 different VDSOs. The VDSO to use is selected by the mips_abi structure. A kernel/user shared data page is created and mapped below the VDSO image. This is currently empty, but will be used by the user time function implementations which are added later. [markos.chandras@imgtec.com: - Add more comments - Move abi detection in genvdso.h since it's the get_symbol function that needs it. - Add an R6 specific way to calculate the base address of VDSO in order to avoid the branch instruction which affects performance. - Do not patch .gnu.attributes since it's not needed for dynamic linking. - Simplify Makefile a little bit. - checkpatch fixes - Restrict VDSO support for binutils < 2.25 for pre-R6 - Include atomic64.h for O32 variant on MIPS64] Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts mpc30x_defconfig to use libata PATA drivers. PS This platform still uses "ide0=base[,ctl[,irq]]" hack in its defconfig. The hack itself has been removed in 2008 and this platform should be converted to using PATA platform host driver (pata_platform) instead. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11141/Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maltaup_xpa_defconfig to use libata PATA drivers (tc86c001 IDE host driver has no corresponding libata driver yet so it is not converted). Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maltaup_defconfig to use libata PATA drivers. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maltasmvp_eva_defconfig to use libata PATA drivers. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maltaaprp_defconfig to use libata PATA drivers. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts malta_qemu_32r6_defconfig to use libata PATA drivers. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts malta_kvm_guest_defconfig to use libata PATA drivers (tc86c001 IDE host driver has no corresponding libata driver yet so it is not converted). Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts malta_kvm_defconfig to use libata PATA drivers (tc86c001 IDE host driver has no corresponding libata driver yet so it is not converted). Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts malta_defconfig to use libata PATA drivers. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts lemote2f_defconfig to use libata PATA drivers. PS This platform uses CS5536 chipset which (due to historical reasons) has basic support in AMD/nVidia PATA host driver and full support in a newer CS5536 PATA one (pata_cs5536). Thus most likely this platform should switch to using the latter host driver. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts lasat_defconfig to use libata PATA drivers. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts fuloong2e_defconfig to use libata PATA drivers. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts e55_defconfig to use libata PATA drivers. PS This platform still uses "ide0=base[,ctl[,irq]]" hack in its defconfig. The hack itself has been removed in 2008 and this platform should be converted to using PATA platform host driver (pata_platform) instead. Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts capcella_defconfig to use libata PATA drivers. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts bigsur_defconfig to use libata PATA drivers (tc86c001 IDE host driver has no corresponding libata driver yet so it is not converted). Signed-off-by:
-
Paul Burton authored
Extend the existing support for Hardware Table Walking (HTW) to MIPS64 systems by supporting PMDs & setting the pointer size bit in PWSize, then ceasing to blacklist HTW on MIPS64 systems. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11224/Signed-off-by:
-
Paul Burton authored
If we fail to register any real SMP implementations, fall back to registering the dummy UP implementation. Otherwise when we build an SMP kernel & run it on a system where the SMP implementations fail to probe (eg. QEMU) the kernel will perform a NULL dereference attempting to call mp_ops->smp_setup() from plat_smp_setup(). Notably this fixes booting kernels with CPS SMP enabled on QEMU, which doesn't currently implement the CM, CPC or GIC. Signed-off-by:
-
Paul Burton authored
Move memory configuration to be performed via device tree for the Malta board. This moves more Malta specific code to malta-dtshim.c, leaving the rest of the mti-malta code a little more board-agnostic. This will be useful to share more code between boards, with the device tree providing the board specifics as intended. Since we can't rely upon Malta boards running a bootloader capable of handling devictrees & filling in the required information, a piece of shim code (malta_dt_shim) is added to consume the (e)memsize variables provided as part of the bootloader environment (or on the kernel command line) then generate the DT memory node using the provided values. Signed-off-by:
-
Paul Burton authored
The fw_getmdesc function & fw_memblock_t abstraction is only used by Malta, and so far as I can tell serves no purpose beyond making the code less clear than it could be. Remove the useless level of abstraction. Signed-off-by:
-
Paul Burton authored
Split the obj-y entries to their own lines such that it's easier to see what's going on when adding or removing entries. Signed-off-by:
-
Paul Burton authored
Commit a68d09a1 ("MIPS: Don't use RI/XI with 32-bit kernels on 64-bit CPUs") prevented use of RIXI on MIPS64 systems, stating that the "TLB handlers cannot handle this case". What they actually couldn't handle was cases where there were less fill bits in the Entry{Lo,Hi} registers than bits used by software in PTEs. The handlers can now deal with this case, so enable RIXI for MIPS32 kernels on MIPS64 systems. Note that beyond the obvious benefits provided by having RIXI on such systems, this is required for systems implementing MIPSr6 where RIXI cannot be disabled. This reverts commit a68d09a1 ("MIPS: Don't use RI/XI with 32-bit kernels on 64-bit CPUs"). Signed-off-by:
-
Paul Burton authored
Commit 748e787e ("MIPS: Optimize TLB refill for RI/XI configurations.") stopped explicitly clearing the bits used by software in PTEs by making use of a rotate instruction that rotates them into the fill bits of the Entry{Lo,Hi} register. This can only work if there are actually enough fill bits in the register to cover the software maintained bits, otherwise we end up writing those bits into the upper bits of the PFN or PFNX field of the Entry{Lo,Hi} register. Fix this by detecting the number of fill bits present in the Entry{Lo,Hi} registers & explicitly clearing the software bits where necessary. Signed-off-by:
-
Paul Burton authored
Tidy up the definition of the EntryLo RI & XI bits using BITS_PER_LONG rather than #ifdef'ing on CONFIG_64BIT, and add a definition for the offset to the PFN field for use by a later patch. Signed-off-by:
-
Paul Burton authored
The code in build_update_entries for 64 bit physical addresses on a MIPS64 CPU and 32 bit physical addresses on a MIPS32 CPU is now identical, with the exception of r4k bug workaround in the latter which would simply not apply to the former. Remove the duplication and some Signed-off-by:
-
