The only boardinfo needed in this driver only consists of 6 data
values. The "common" addi_board has a lot of unnecessary bloat.

Create a local struct for this drivers boardinfo and remove the
need for struct addi_board in the "common" code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The only private data this driver has is the iobase address for the
watchdog. Create a local struct to hold this information in dev->private
and remove the need for struct addi_private from the "common" code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The addi-data "common" code always allocated 7 subdevices. This driver
only requires 3. Change the allocation and remove the unused subdevices.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing through devpriv->s_EeParameters.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does use devpriv->i_IobaseAmcc or devpriv->i_IobaseReserved.
Don't bother reading these PCI bars.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver does not ioremap the PCI bar stored in devpriv->dw_AiBase.
Remove the iounmap.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The iobase address stored in devpriv->iobase is also stored in dev->iobase.
Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The i_IorangeBase[012], i_PCIEeprom, and pc_EepromChip data in the
boardinfo was only needed to work out the usage of the PCI bars.
This is no longer needed so remove the data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards supported by this driver have an eeprom attached to a S5920
PCI controller chip. Knowing this information allows simplifying the
code that reads the PCI bars to get the iobase address.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The same subdevice operations are used, as needed, for all the boards
supported by this driver. Remove the function pointers from the
boardinfo and set the subdevice operations directly in the attach.

Remove all the subdevice operations that would be set to NULL.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards supported by this driver do not have interrupt capabiltiy.
Remove the interrupt support code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The apci1016 board only has digital inputs. There is no reason to
reset the digital outputs and watchdog timer on that board.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The same low-level reset function is used by all the boards supported
by this driver. Remove it from the boardinfo and absorb the function
from hwdrv_apci1516.c directly into the driver.

Rename the CamelCase function i_ADDI_Reset() to apci1516_reset().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This include is not needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The COMEDI_SUBD_TTLIO define is not used by this driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reading the eeprom on the boards supported by this driver is not
necessary. All the information required is in the boardinfo.

Remove the eeprom support code since it's not really interesting
or useful.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards supported by this driver do not have analog outputs. Remove
the subdevice init for it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards supported by this driver do not have analog inputs. Remove
the subdevice init for it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards supported by this driver do not have ttl i/o. Remove the
subdevice init for it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is for simple 16 channel dio boards. Using the addi-data
"common" code introduces a lot of bloat.

Copy the code in addi_common.c to this driver and remove the #include
that caused addi_common.c to be compiled with this driver. This will
allow removing the bloat.

Rename the attach_pci and detach functions so they have namespace
associated with this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add defines for the bits in the watchdog control register and use
them to remove the "magic" numbers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetic reasons, rename the defines used for the register map
and convert them from decimal to hex values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The apci1016 board can also be supported by this driver. This board is
also a 16 channel dio board with 16 input channels. The apci1016 does
not have the watchdog timer feature of the apci1516 and apci2016.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The low-level hardware support code for these drivers, hwdrv_apci1516.c
and hwdrv_apci2016.c, is identical. Both of these boards are 16 channel
dio boards. The 1516 board has 8 input/8 output channels and the 2016
has 16 output channels.

To ease maintainability, merge the boardinfo and pci device information
from the addi_apci_2016 driver into the addi_apci_1516 driver and modify
the Kconfig and Makefile appropriately.

This allows deleting the addi_apci_2016.c and hwdrv_apci2016.c files.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Calls ioctl SIOCGIWAPLIST use off stack buffers.

clears up warning messages.
main_usb.c:2015:1: warning: the frame size of 1888 bytes is larger than 1024 bytes [-Wframe-larger-than=]
iwctl.c:683:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the context restore function, if the context is lost or
not is being checked by the contents of the counter register.
But this is logic hold good as long as counter reset value is
zero, if the reset value is non-zero then above logic doesn't
hold good. Hence removed checking of the register value and
restoring the context.
Signed-off-by: Radhesh Fadnis <radhesh.fadnis@ti.com>
Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For debugging purposes, print the IRQ event for the domain being processed.
Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The API exposed by cpu cooling does not need any freq clip
table anymore. Now the cpu cooling device is smart enough
to build its own table.

For this reason, this patch removes all the code that is
generating a freq clip table and also removes all references
in data structures regarding freq clip table.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Because the driver is not really using platform data, this patch
removes the pdata nomenclature from this driver.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Because we are not including linux/io.h, the driver is not compiling.
This patch adds the missing header.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This has been added once, but does not seem to be necessary. Tested
on i.MX51 and i.MX6.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To allow the iomux to be configured for the display.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For configuring interleaved formats.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's for debugging only, so use dev_dbg.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

YVYU is not supported by the IPU, so remove partial handling
of this format and replace it with YUYV which is supported.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"The cpu return address and the DMA bus master address are both
guaranteed to be aligned to the smallest PAGE_SIZE order which
is greater than or equal to the requested size."

There are several places in the et131x.c code where these addresses are
aligned to a 4k boundary after a call to dma_alloc_coherent(),
needlessly.

Remove these alignment offset calculations, and the
et131x_align_allocated_memory() call which is only used for 4k
alignments.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In et131x_rx_dma_memory_alloc(), we loop over fbr_entries - the values of
fbr_align and fbr_chunksize calculated in the loop do not depend on the
loop counter and are the same for all loop iterations.

Take the calculations of these values out of the loop, as we only
need to calculate them once per loop, not once per loop iteration.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes one of the two instances of an 80+ char line in the file.
Fixing the other instance would have decreased the readability of the
code, in my opinion.
Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This uses linux/io.h instead of asm/io.h and cleans up an 80+ character issue.
Signed-off-by: Johan Meiring <johanmeiring@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>