Pass rule, chain and flow_rule object parameters to nft_flow_offload_rule
to reuse it.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pass chain and policy parameters to nft_flow_offload_chain to reuse it.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add __nft_offload_get_chain function to get basechain from device. This
function requires that caller holds the per-netns nftables mutex. This
patch implicitly fixes missing offload flags check and proper mutex from
nft_indr_block_cb().

Fixes: 9a32669f ("netfilter: nf_tables_offload: support indr block call")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch adds support for packet mirroring and redirection. The
nft_fwd_dup_netdev_offload() function configures the flow_action object
for the fwd and the dup actions.

Extend nft_flow_rule_destroy() to release the net_device object when the
flow_rule object is released, since nft_fwd_dup_netdev_offload() bumps
the net_device reference counter.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: wenxu <wenxu@ucloud.cn>

Register a new synproxy stateful object type into the stateful object
infrastructure.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add nft_offload_init() and nft_offload_exit() function to deal with the
init and the exit path of the offload infrastructure.

Rename nft_indr_block_get_and_ing_cmd() to nft_indr_block_cb().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The nft_offload_ctx structure is much too large to put on the
stack:

net/netfilter/nf_tables_offload.c:31:23: error: stack frame size of 1200 bytes in function 'nft_flow_rule_create' [-Werror,-Wframe-larger-than=]

Use dynamic allocation here, as we do elsewhere in the same
function.

Fixes: c9626a2c ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The "newobj" is an error pointer so we can't pass it to kfree().  It
doesn't need to be freed so we can remove that and I also renamed the
error label.

Fixes: d62d0ba9 ("netfilter: nf_tables: Introduce stateful object update operation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Jakub Kicinski says:

====================
net/tls: small TX offload optimizations

This set brings small TLS TX device optimizations. The biggest
gain comes from fixing a misuse of non temporal copy instructions.
On a synthetic workload modelled after customer's RFC application
I see 3-5% percent gain.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike normal TCP code TLS has to touch the cache lines
it copies into to fill header info. On memory-heavy workloads
having non temporal stores and normal accesses targeting
the same cache line leads to significant overhead.

Measured 3% overhead running 3600 round robin connections
with additional memory heavy workload.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For TLS device offload the tag/message authentication code are
filled in by the device. The kernel merely reserves space for
them. Because device overwrites it, the contents of the tag make
do no matter. Current code tries to save space by reusing the
header as the tag. This, however, leads to an additional frag
being created and defeats buffer coalescing (which trickles
all the way down to the drivers).

Remove this optimization, and try to allocate the space for
the tag in the usual way, leave the memory uninitialized.
If memory allocation fails rewind the record pointer so that
we use the already copied user data as tag.

Note that the optimization was actually buggy, as the tag
for TLS 1.2 is 16 bytes, but header is just 13, so the reuse
may had looked past the end of the page..
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All modifications to TLS record list happen under the socket
lock. Since records form an ordered queue readers are only
concerned about elements being removed, additions can happen
concurrently.

Use RCU primitives to ensure the correct access types
(READ_ONCE/WRITE_ONCE).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's generally more cache friendly to walk arrays in order,
especially those which are likely not in cache.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2019-09-06

Here's the main bluetooth-next pull request for the 5.4 kernel.

 - Cleanups & fixes to btrtl driver
 - Fixes for Realtek devices in btusb, e.g. for suspend handling
 - Firmware loading support for BCM4345C5
 - hidp_send_message() return value handling fixes
 - Added support for utilizing Fast Advertising Interval
 - Various other minor cleanups & fixes

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't populate the array spec_opcode on the stack but instead make it
static const. Makes the object code smaller by 48 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
   6914	   1040	    128	   8082	   1f92	hns3/hns3vf/hclgevf_cmd.o

After:
   text	   data	    bss	    dec	    hex	filename
   6866	   1040	    128	   8034	   1f62	hns3/hns3vf/hclgevf_cmd.o

(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't populate the arrays on the stack but instead make them
static const. Makes the object code smaller by 281 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  87553	   5672	      0	  93225	  16c29	benet/be_cmds.o

After:
   text	   data	    bss	    dec	    hex	filename
  87112	   5832	      0	  92944	  16b10	benet/be_cmds.o

(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove including <linux/version.h> that don't need it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jose Abreu says:

====================
net: stmmac: Improvements and fixes for -next

Improvements and fixes for recently introduced features. All for -next tree.
More info in commit logs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We may have some SoCs that can't achieve XGMAC max speed. Limit it if
asked to.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a test to validate that Split Header feature is working correctly.
It works by using the rececently introduced counter that increments each
time a packet with split header is received.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We are already doing it by default in the TX path so we can also enable
Jumbo Frame support in the RX path independently of MTU value.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to set the RX tail pointer so that RX engine starts working
again after finishing the Flow Control test.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add checks for support of Source Address Insertion/Replacement before
running the test.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a re-post of previous patch wrote by David Miller[1].

Phil Karn reported[2] that on busy networks with lots of unresolved
multicast routing entries, the creation of new multicast group routes
can be extremely slow and unreliable.

The reason is we hard-coded multicast route entries with unresolved source
addresses(cache_resolve_queue_len) to 10. If some multicast route never
resolves and the unresolved source addresses increased, there will
be no ability to create new multicast route cache.

To resolve this issue, we need either add a sysctl entry to make the
cache_resolve_queue_len configurable, or just remove cache_resolve_queue_len
limit directly, as we already have the socket receive queue limits of mrouted
socket, pointed by David.

>From my side, I'd perfer to remove the cache_resolve_queue_len limit instead
of creating two more(IPv4 and IPv6 version) sysctl entry.

[1] https://lkml.org/lkml/2018/7/22/11
[2] https://lkml.org/lkml/2018/7/21/343

v3: instead of remove cache_resolve_queue_len totally, let's only remove
the hard code limit when allocate the unresolved cache, as Eric Dumazet
suggested, so we don't need to re-count it in other places.

v2: hold the mfc_unres_lock while walking the unresolved list in
queue_count(), as Nikolay Aleksandrov remind.
Reported-by: Phil Karn <karn@ka9q.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Haiyang Zhang says:

====================
hv_netvsc: Enable sg as tunable, sync offload settings to VF NIC

This patch set fixes an issue in SG tuning, and sync
offload settings from synthetic NIC to VF NIC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

VF NIC may go down then come up during host servicing events. This
causes the VF NIC offloading feature settings to roll back to the
defaults. This patch can synchronize features from synthetic NIC to
the VF NIC during ndo_set_features (ethtool -K),
and netvsc_register_vf when VF comes back after host events.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Mark Bloch <markb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a previous patch, the NETIF_F_SG was missing after the code changes.
That caused the SG feature to be "fixed". This patch includes it into
hw_features, so it is tunable again.

Fixes: 23312a3b ("netvsc: negotiate checksum and segmentation parameters")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2019-09-05

1) Allover mlx5 cleanups

2) Added port congestion counters to ethtool stats:

Add 3 counters per priority to ethtool using PPCNT:
  2.1) rx_prio[p]_buf_discard - the number of packets discarded by device
       due to lack of per host receive buffers
  2.2) rx_prio[p]_cong_discard - the number of packets discarded by device
       due to per host congestion
  2.3) rx_prio[p]_marked - the number of packets ECN marked by device due
       to per host congestion
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_diag_get_aux_size() can be called with sockets in any state.

icsk_ulp_ops is only present for full sockets.

For SYN_RECV or TIME_WAIT ones we would access garbage.

Fixes: 61723b39 ("tcp: ulp: add functions to dump ulp-specific information")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Luke Hsiao <lukehsiao@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Cc: Davide Caratti <dcaratti@redhat.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No need for fib_notifier_ops to be in struct net. It is used only by
fib_notifier as a private data. Use net_generic to introduce per-net
fib_notifier struct and move fib_notifier_ops there.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Add nft_reg_store64() and nft_reg_load64() helpers, from Ander Juaristi.

2) Time matching support, also from Ander Juaristi.

3) VLAN support for nfnetlink_log, from Michael Braun.

4) Support for set element deletions from the packet path, also from Ander.

5) Remove __read_mostly from conntrack spinlock, from Li RongQing.

6) Support for updating stateful objects, this also includes the initial
   client for this infrastructure: the quota extension. A follow up fix
   for the control plane also comes in this batch. Patches from
   Fernando Fernandez Mancera.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-09-05

This series contains updates to ice driver.

Brett fixes the setting of num_q_vectors by using the maximum number
between the allocated transmit and receive queues.

Anirudh simplifies the code to use a helper function to return the main
VSI, which is the first element in the pf->vsi array.  Adds a pointer
check to prevent a NULL pointer dereference.  Adds a check to ensure we
do not initialize DCB on devices that are not DCB capable.  Does some
housekeeping on the code to remove unnecessary indirection and reduce
the PF structure by removing elements that are not needed since the
values they were storing can be readily gotten from
ice_get_avail_*_count()'s.  Updates the printed strings to make it
easier to search the logs for driver capabilities.

Jesse cleans up unnecessary function arguments.  Updated the code to use
prefetch() to add some efficiency to the driver to avoid a cache miss.
Did some housekeeping on the code to remove the configurable transmit
work limit via ethtool which ended up creating performance overhead.
Made additional performance enhancements by updating the driver to start
out with a reasonable number of descriptors by changing the default to
2048.

Mitch fixes the reset logic for VFs by clearing VF_MBX_ARQLEN register
when the source of the reset is not PFR.

Lukasz updates the driver to include a similar fix for the i40e driver
by reporting link down for VF's when the PF queues are not enabled.

Akeem updates the driver to report the VF link status once we get VF
resources so that we can reflect the link status similarly to how the PF
reports link speed.

Ashish updates the transmit context structure based on recent changes to
the hardware specification.

Dave updates the DCB logic to allow a delayed registration for MIB
change events so that the driver is not accepting events before it is
ready for them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2019-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 5.4

Second set of patches for 5.4. Lots of changes for iwlwifi and mt76,
but also smaller changes to other drivers.

Major changes:

iwlwifi

* remove broken and unused runtime power management mode for PCIe
  devices, removes IWLWIFI_PCIE_RTPM Kconfig option as well

* support new ACPI value for per-platform antenna gain

* support for single antenna diversity

* support for new WoWLAN FW API

brcmfmac

* add reset debugfs file for testing firmware restart

mt76

* DFS pattern detector for mt7615 (DFS channels not enabled yet)

* Channel Switch Announcement (CSA) support for mt7615

* new device support for mt76x0

* support for more ciphers in mt7615

* smart carrier sense on mt7615

* survey support on mt7615

* multiple interfaces on mt76x02u

rtw88

* enable MSI interrupt
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'iwlwifi-next-for-kalle-2019-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Patches intended for v5.4

* Remove (broken) d0i3 support;
* Debug infrastructure work continues;
* Bump support FW API version to 50;
* Fix for the SN value in certain suspend/resume situations;
* Some work on new FW scan APIs;
* Work on LTR FW APIs;
* New FW channel-switch support;
* Support new ACPI value for per-platform antenna gain;
* Support for single antenna diversity;
* Support for new WoWLAN FW API;
* Initial refactoring of the device selection code;
* A bunch of clean-ups;
* Other small fixes and improvements;

Daniel Borkmann says:

====================
The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add the ability to use unaligned chunks in the AF_XDP umem. By
   relaxing where the chunks can be placed, it allows to use an
   arbitrary buffer size and place whenever there is a free
   address in the umem. Helps more seamless DPDK AF_XDP driver
   integration. Support for i40e, ixgbe and mlx5e, from Kevin and
   Maxim.

2) Addition of a wakeup flag for AF_XDP tx and fill rings so the
   application can wake up the kernel for rx/tx processing which
   avoids busy-spinning of the latter, useful when app and driver
   is located on the same core. Support for i40e, ixgbe and mlx5e,
   from Magnus and Maxim.

3) bpftool fixes for printf()-like functions so compiler can actually
   enforce checks, bpftool build system improvements for custom output
   directories, and addition of 'bpftool map freeze' command, from Quentin.

4) Support attaching/detaching XDP programs from 'bpftool net' command,
   from Daniel.

5) Automatic xskmap cleanup when AF_XDP socket is released, and several
   barrier/{read,write}_once fixes in AF_XDP code, from Björn.

6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf
   inclusion as well as libbpf versioning improvements, from Andrii.

7) Several new BPF kselftests for verifier precision tracking, from Alexei.

8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya.

9) And more BPF kselftest improvements all over the place, from Stanislav.

10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub.

11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan.

12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni.

13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin.

14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar.

15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari,
    Peter, Wei, Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable rx_process_result is being initialized with a value that
is never read and is being re-assigned immediately afterwards. The
assignment is redundant, so replace it with the return from function
lan743x_rx_process_packet.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
ravb: remove use of undocumented registers

this short series cleans up the RAVB driver a little.

The first patch corrects the spelling of the FBP field of SFO register.
This register field is unused and should have no run-time effect.

The remaining patches remove the use of undocumented registers
after some consultation with the internal Renesas BSP team.

Changes in v2:
* Corrected mangled state of first patch
* Patches 2/4 and 3/4 split out of a large patch
* Accumulated acks
* Tweaked changelog
* Claimed authorship of all patches

v1 of this series was tested on the following platforms.
No behaviour change is expected in v2.
* E3 Ebisu
* H3 Salvator-XS (ES2.0)
* M3-W Salvator-XS
* M3-N Salvator-XS
* RZ/G1C iW-RainboW-G23S
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Only use the TROCR register on R-Car Gen3 as it is not present on other
SoCs.

Offsets used for the undocumented registers are considered reserved and
should not be written to. After some internal investigation with Renesas it
remains unclear why this driver accesses these fields on R-Car Gen2 but
regardless of what the historical reasons are the current code is
considered incorrect.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes the use of the undocumented BOC bit of the CCC register.

Current documentation for EtherAVB (ravb) describes the offset of what the
driver uses as the BOC bit as reserved and that only a value of 0 should be
written. After some internal investigation with Renesas it remains unclear
why this driver accesses these fields but regardless of what the historical
reasons are the current code is considered incorrect.

Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>