- 26 Jun, 2013 2 commits
-
-
Paul Gortmaker authored
Delete all audit rules that were checking how the .cpuXYZ related sections were inter-operating with other __init like sections, now that __cpuinit is gone. Update the linker script to not have any knowledge of .cpuinit sections. [lds.h update courtesy of Ralf Baechle <ralf@linux-mips.org>] Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
Paul Gortmaker authored
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. As an interim step, we can dummy out the macros to be no-ops, and this will allow us to avoid a giant tree-wide patch, and instead we can feed in smaller chunks mainly via the arch/ trees. This is in keeping with commit 78d86c21 ("init.h: Remove __dev* sections from the kernel") We don't strictly need to dummy out the macros to do this, but if we don't then some harmless section mismatch warnings may temporarily result. For example, notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit. And hence the calling functions in the arch specific code are also expected to be __cpuinit -- if not, then we get the section mismatch warning. Two of the three __CPUINIT variants are not used whatsoever, and so they are simply removed directly at this point in time. [1] https://lkml.org/lkml/2013/5/20/589Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
- 22 Jun, 2013 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "These are two fixes that came in this week, one for a regression we introduced in 3.10 in the GIC interrupt code, and the other one fixes a typo in newly introduced code" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
-
Linus Torvalds authored
Merge tag 'driver-core-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg Kroah-Hartman: "Here's a single patch for the firmware core that resolves a reported oops in the firmware core that people have been hitting." * tag 'driver-core-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware loader: fix use-after-free by double abort
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg Kroah-Hartman: "Here are two USB patches for 3.10. One updates the Kconfig wording for CONFIG_USB_PHY to make it, hopefully, more obvious what this option is (I know you complained about this when it hit the tree.) The other is a new device id for a driver" * tag 'usb-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable usb: phy: Improve Kconfig help for CONFIG_USB_PHY
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pul tty fixes from Greg Kroah-Hartman: "Here are two tty core fixes that resolve some regressions that have been reported recently. Both tiny fixes, but needed" * tag 'tty-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix transient pty write() EIO tty/vt: Return EBUSY if deallocating VT1 and it is busy
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "Included is the recent tcm_qla2xxx residual underrun length fix from Roland, along with Joern's iscsi-target patch for session_lock breakage within iscsit_stop_time2retain_timer() code. Both are CC'ed to stable. The remaining two are specific to recent iscsi-target + iser conversion changes. One drops some left-over debug noise, and Andy's patch fixes configfs attribute handling during an explicit network portal feature bit disable when iser-target is unsupported." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Remove left over v3.10-rc debug printks target/iscsi: Fix op=disable + error handling cases in np_store_iser tcm_qla2xxx: Fix residual for underrun commands that fail target/iscsi: don't corrupt bh_count in iscsit_stop_time2retain_timer()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "Another set of fixes for Kernel 3.10. This series contain: - two Kbuild fixes for randconfig - a buffer overflow when using rtl28xuu with r820t tuner - one clk fixup on exynos4-is driver" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] Fix build when drivers are builtin and frontend modules [media] s5p makefiles: don't override other selections on obj-[ym] [media] exynos4-is: Fix FIMC-IS clocks initialization [media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "Several fixes for bugs caught while looking through f_pos (ab)users" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aout32 coredump compat fix splice: don't pass the address of ->f_pos to methods mconsole: we'd better initialize pos before passing it to vfs_read()...
-
Al Viro authored
dump_seek() does SEEK_CUR, not SEEK_SET; native binfmt_aout handles it correctly (seeks by PAGE_SIZE - sizeof(struct user), getting the current position to PAGE_SIZE), compat one seeks by PAGE_SIZE and ends up at PAGE_SIZE + already written... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 21 Jun, 2013 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "This series fixes a couple of build failures, and fixes MTRR cleanup and memory setup on very specific memory maps. Finally, it fixes triggering backtraces on all CPUs, which was inadvertently disabled on x86." * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Fix dummy variable buffer allocation x86: Fix trigger_all_cpu_backtrace() implementation x86: Fix section mismatch on load_ucode_ap x86: fix build error and kconfig for ia32_emulation and binfmt range: Do not add new blank slot with add_range_with_merge x86, mtrr: Fix original mtrr range get for mtrr_cleanup
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm radeon fixes from Dave Airlie: "One core fix, but mostly radeon fixes for s/r and big endian UVD support, and a fix to stop the GPU being reset for no good reason, and crashing people's machines." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: update lockup tracking when scheduling in empty ring drm/prime: Honor requested file flags when exporting a buffer drm/radeon: fix UVD on big endian drm/radeon: fix write back suspend regression with uvd v2 drm/radeon: do not try to uselessly update virtual memory pagetable
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: - Fix for a regression causing a failure to turn on some devices on some systems during initialization introduced by a recent revert of an ACPI PM change that broke something else. Fortunately, we know exactly what devices are affected, so we can add a fix just for them leaving everyone else alone. - ACPI power resources initialization fix preventing a NULL pointer from being dereferenced in the acpi_add_power_resource() error code path. - ACPI dock station driver fix that adds missing locking to write_undock(). - ACPI resources allocation fix changing the scope of an old workaround so that it doesn't affect systems that aren't actually buggy. This was reported a couple of days ago to fix DMA problems on some new platforms so we need it in -stable. From Mika Westerberg. * tag 'acpi-3.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / LPSS: Power up LPSS devices during enumeration ACPI / PM: Fix error code path for power resources initialization ACPI / dock: Take ACPI scan lock in write_undock() ACPI / resources: call acpi_get_override_irq() only for legacy IRQ resources
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Three one-line fixes for my first pull request; one for x86 host, one for x86 guest, one for PPC" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: x86: kvmclock: zero initialize pvclock shared memory area kvm/ppc/booke: Delay kvmppc_lazy_ee_enable KVM: x86: remove vcpu's CPL check in host-invoked XCR set
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes an unaligned crash in XTS mode when using aseni_intel" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: aesni_intel - fix accessing of unaligned memory
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fix from Sage Weil: "This fixes a problem preventing the kernel and userland librbd libraries from sharing data with the new format 2 images" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use the correct length for format 2 object names
-
H. Peter Anvin authored
* Don't leak random kernel memory to EFI variable NVRAM when attempting to initiate garbage collection. Also, free the kernel memory when we're done with it instead of leaking - Ben Hutchings Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
Ben Hutchings authored
1. Check for allocation failure 2. Clear the buffer contents, as they may actually be written to flash 3. Don't leak the buffer Compile-tested only. [ Tested successfully on my buggy ASUS machine - Matt ] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-
- 20 Jun, 2013 18 commits
-
-
Nicholas Bellinger authored
Reported-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Andy Grover authored
Writing 0 when iser was not previously enabled, so succeed but do nothing so that user-space code doesn't need a try: catch block when ib_isert logic is not available. Also, return actual error from add_network_portal using PTR_ERR during op=enable failure. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
One user visible fix to stop misreport GPU hangs and subsequent resets. * 'drm-fixes-3.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: update lockup tracking when scheduling in empty ring
-
Jerome Glisse authored
There might be issue with lockup detection when scheduling on an empty ring that have been sitting idle for a while. Thus update the lockup tracking data when scheduling new work in an empty ring. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two smaller fixes - plus a context tracking tracing fix that is a bit bigger" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing/context-tracking: Add preempt_schedule_context() for tracing sched: Fix clear NOHZ_BALANCE_KICK sched/x86: Construct all sibling maps if smt
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Four fixes. The mmap ones are unfortunately larger than desired - fuzzing uncovered bugs that needed perf context life time management changes to fix properly" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP perf: Fix mmap() accounting hole perf: Fix perf mmap bugs kprobes: Fix to free gone and unused optprobes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull cpu idle fixes from Thomas Gleixner: - Add a missing irq enable. Fallout of the idle conversion - Fix stackprotector wreckage caused by the idle conversion * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: idle: Enable interrupts in the weak arch_cpu_idle() implementation idle: Add the stack canary init to cpu_startup_entry()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: - Fix inconstinant clock usage in virtual time accounting - Fix a build error in KVM caused by the NOHZ work - Remove a pointless timekeeping duty assignment which breaks NOHZ - Use a proper notifier return value to avoid random behaviour * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Remove useless timekeeping duty attribution to broadcast source nohz: Fix notifier return val that enforce timekeeping kvm: Move guest entry/exit APIs to context_tracking vtime: Use consistent clocks among nohz accounting
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fix fro, Benjamin Herrenschmidt: "We accidentally broke hugetlbfs on Freescale embedded processors which use a slightly different page table layout than our server processors" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix bad pmd error with book3E config
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull tilepro fix from Chris Metcalf: "This change allows the older tilepro architecture to be correctly built by newer gccs, despite a change that caused gcc to start trying to use an out-of-line implementation for __builtin_ffsll(). This should be inline again starting with gcc 4.7.4 and 4.8.2 or so, but meanwhile this change keeps things from breaking, with the only cost being a few bytes of code in the kernel to provide __ffsdi2 even for compilers that do inline it" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tilepro: work around module link error with gcc 4.7
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64Linus Torvalds authored
Pull arm64 perf fix from Catalin Marinas: "Perf fix (user-mode PC recording)" * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: perf: arm64: Record the user-mode PC in the call chain.
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Mauro Carvalho Chehab authored
There are a large number of reports that the media build is not compiling when some drivers are compiled as builtin, while the needed frontends are compiled as module. On the last one of such reports: From: kbuild test robot <fengguang.wu@intel.com> Subject: saa7134-dvb.c:undefined reference to `zl10039_attach' The .config file has: CONFIG_VIDEO_SAA7134=y CONFIG_VIDEO_SAA7134_DVB=y # CONFIG_MEDIA_ATTACH is not set CONFIG_DVB_ZL10039=m And it produces all those errors: drivers/built-in.o: In function `set_type': tuner-core.c:(.text+0x2f263e): undefined reference to `tea5767_attach' tuner-core.c:(.text+0x2f273e): undefined reference to `tda9887_attach' drivers/built-in.o: In function `tuner_probe': tuner-core.c:(.text+0x2f2d20): undefined reference to `tea5767_autodetection' drivers/built-in.o: In function `av7110_attach': av7110.c:(.text+0x330bda): undefined reference to `ves1x93_attach' av7110.c:(.text+0x330bf7): undefined reference to `stv0299_attach' av7110.c:(.text+0x330c63): undefined reference to `tda8083_attach' av7110.c:(.text+0x330d09): undefined reference to `ves1x93_attach' av7110.c:(.text+0x330d33): undefined reference to `tda8083_attach' av7110.c:(.text+0x330d5d): undefined reference to `stv0297_attach' av7110.c:(.text+0x330dbe): undefined reference to `stv0299_attach' drivers/built-in.o: In function `tuner_attach_dtt7520x': ngene-cards.c:(.text+0x3381cb): undefined reference to `dvb_pll_attach' drivers/built-in.o: In function `demod_attach_lg330x': ngene-cards.c:(.text+0x33828a): undefined reference to `lgdt330x_attach' drivers/built-in.o: In function `demod_attach_stv0900': ngene-cards.c:(.text+0x3383d5): undefined reference to `stv090x_attach' drivers/built-in.o: In function `cineS2_probe': ngene-cards.c:(.text+0x338b7f): undefined reference to `drxk_attach' drivers/built-in.o: In function `configure_tda827x_fe': saa7134-dvb.c:(.text+0x346ae7): undefined reference to `tda10046_attach' drivers/built-in.o: In function `dvb_init': saa7134-dvb.c:(.text+0x347283): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x3472cd): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x34731c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x34733c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x34735c): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x347378): undefined reference to `tda10046_attach' saa7134-dvb.c:(.text+0x3473db): undefined reference to `tda10046_attach' drivers/built-in.o:saa7134-dvb.c:(.text+0x347502): more undefined references to `tda10046_attach' follow drivers/built-in.o: In function `dvb_init': saa7134-dvb.c:(.text+0x347812): undefined reference to `mt352_attach' saa7134-dvb.c:(.text+0x347951): undefined reference to `mt312_attach' saa7134-dvb.c:(.text+0x3479a9): undefined reference to `mt312_attach' >> saa7134-dvb.c:(.text+0x3479c1): undefined reference to `zl10039_attach' This is happening because a builtin module can't use directly a symbol found on a module. By enabling CONFIG_MEDIA_ATTACH, the configuration becomes valid, as dvb_attach() macro loads the module if needed, making the symbol available to the builtin module. While this bug started to appear after the patches that use IS_DEFINED macro (like changeset 7b34be71), this bug is a way ancient than that. The thing is that, before the IS_DEFINED() patches, the logic used to be: && defined(MODULE)) struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, u8 i2c_addr, struct i2c_adapter *i2c); static inline struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe, u8 i2c_addr, struct i2c_adapter *i2c) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; } The above code, with the .config file used, was evoluting to FALSE (instead of TRUE as it should be, as CONFIG_DVB_ZL10039 is 'm'), and were adding the static inline code at saa7134-dvb, instead of the external call. So, while it weren't producing any compilation error, the code weren't working either. So, as the overhead for using CONFIG_MEDIA_ATTACH is minimal, just enable it, if MODULES is defined. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Shawn Guo authored
Commit c0114709 (irqchip: gic: Perform the gic_secondary_init() call via CPU notifier) moves gic_secondary_init() that used to be called in .smp_secondary_init hook into a notifier call. But it changes the system behavior a little bit. Before the commit, gic_cpu_init() is called not only when kernel brings up the secondary cores but also when system resuming procedure hot-plugs the cores back to kernel. While after the commit, the function will not be called in the latter case, where the 'action' will not be CPU_STARTING but CPU_STARTING_FROZEN. This behavior difference at least causes the following suspend/resume regression on imx6q. $ echo mem > /sys/power/state PM: Syncing filesystems ... done. PM: Preparing system for mem sleep mmc1: card e624 removed Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep PM: suspend of devices complete after 5.930 msecs PM: suspend devices took 0.010 seconds PM: late suspend of devices complete after 0.343 msecs PM: noirq suspend of devices complete after 0.828 msecs Disabling non-boot CPUs ... CPU1: shutdown CPU2: shutdown CPU3: shutdown Enabling non-boot CPUs ... CPU1: Booted secondary processor INFO: rcu_sched detected stalls on CPUs/tasks: { 1 2 3} (detected by 0, t=2102 jiffies, g=4294967169, c=4294967168, q=17) Task dump for CPU 1: swapper/1 R running 0 0 1 0x00000000 Backtrace: [<bf895ff4>] (0xbf895ff4) from [<00000000>] ( (null)) Backtrace aborted due to bad frame pointer <8007ccdc> Task dump for CPU 2: swapper/2 R running 0 0 1 0x00000000 Backtrace: [<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null)) Backtrace aborted due to bad frame pointer <00000002> Task dump for CPU 3: swapper/3 R running 0 0 1 0x00000000 Backtrace: [<8075dbdc>] (0x8075dbdc) from [<00000000>] ( (null)) Fix the regression by checking 'action' being CPU_STARTING_FROZEN to have gic_cpu_init() called for secondary cores when system resumes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Michel Lespinasse authored
The following change fixes the x86 implementation of trigger_all_cpu_backtrace(), which was previously (accidentally, as far as I can tell) disabled to always return false as on architectures that do not implement this function. trigger_all_cpu_backtrace(), as defined in include/linux/nmi.h, should call arch_trigger_all_cpu_backtrace() if available, or return false if the underlying arch doesn't implement this function. x86 did provide a suitable arch_trigger_all_cpu_backtrace() implementation, but it wasn't actually being used because it was declared in asm/nmi.h, which linux/nmi.h doesn't include. Also, linux/nmi.h couldn't easily be fixed by including asm/nmi.h, because that file is not available on all architectures. I am proposing to fix this by moving the x86 definition of arch_trigger_all_cpu_backtrace() to asm/irq.h. Tested via: echo l > /proc/sysrq-trigger Before the change, this uses a fallback implementation which shows backtraces on active CPUs (using smp_call_function_interrupt() ) After the change, this shows NMI backtraces on all CPUs Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1370518875-1346-1-git-send-email-walken@google.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
Jed Davis authored
With this change, we no longer lose the innermost entry in the user-mode part of the call chain. See also the x86 port, which includes the ip, and the corresponding change in arch/arm. Signed-off-by: Jed Davis <jld@mozilla.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Mauro Carvalho Chehab authored
The $obj-m/$obj-y vars should be adding new modules to build, not overriding it. So, it should never use $obj-y := foo.o instead, it should use: $obj-y += foo.o Failing to do that is very bad, as it will suppress needed modules. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Aneesh Kumar K.V authored
Book3E uses the hugepd at PMD level and don't encode pte directly at the pmd level. So it will find the lower bits of pmd set and the pmd_bad check throws error. Infact the current code will never take the free_hugepd_range call at all because it will clear the pmd if it find a hugepd pointer. Fix this by clearing bad pmd only if it is not a hugepd pointer. This is regression introduced by e2b3d202 "powerpc: Switch 16GB and 16MB explicit hugepages to a different page table format" Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 19 Jun, 2013 3 commits
-
-
Anders Hammarquist authored
Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by: Anders Hammarquist <iko@iko.pp.se> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafael J. Wysocki authored
Commit 7cd8407d (ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization) introduced a regression on some systems with Intel Lynxpoint Low-Power Subsystem (LPSS) where some devices need to be powered up during initialization, but their device objects in the ACPI namespace have _PS0 and _PS3 only (without _PSC or power resources). To work around this problem, make the ACPI LPSS driver power up devices it knows about by using a new helper function acpi_device_fix_up_power() that does all of the necessary sanity checks and calls acpi_dev_pm_explicit_set() to put the device into D0. Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Rafael J. Wysocki authored
Commit 781d737c (ACPI: Drop power resources driver) introduced a bug in the power resources initialization error code path causing a NULL pointer to be referenced in acpi_release_power_resource() if there's an error triggering a jump to the 'err' label in acpi_add_power_resource(). This happens because the list_node field of struct acpi_power_resource has not been initialized yet at this point and doing a list_del() on it is a bad idea. To prevent this problem from occuring, initialize the list_node field of struct acpi_power_resource upfront. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
-