- 24 Sep, 2013 14 commits
-
-
Linus Torvalds authored
Merge bcache fixes from Kent Overstreet: "There's fixes for _three_ different data corruption bugs, all of which were found by users hitting them in the wild. The first one isn't bcache specific - in 3.11 bcache was switched to the bio_copy_data in fs/bio.c, and that's when the bug in that code was discovered, but it's also used by raid1 and pktcdvd. (That was my code too, so the bug's doubly embarassing given that it was or should've been just a cut and paste from bcache code. Dunno what happened there). Most of these (all the non data corruption bugs, actually) were ready before the merge window and have been sitting in Jens' tree, but I don't know what's been up with him lately..." * emailed patches from Kent Overstreet <kmo@daterainc.com>: bcache: Fix flushes in writeback mode bcache: Fix for handling overlapping extents when reading in a btree node bcache: Fix a shrinker deadlock bcache: Fix a dumb CPU spinning bug in writeback bcache: Fix a flush/fua performance bug bcache: Fix a writeback performance regression bcache: Correct printf()-style format length modifier bcache: Fix for when no journal entries are found bcache: Strip endline when writing the label through sysfs bcache: Fix a dumb journal discard bug block: Fix bio_copy_data()
-
Kent Overstreet authored
In writeback mode, when we get a cache flush we need to make sure we issue a flush to the backing device. The code for sending down an extra flush was wrong - by cloning the bio we were probably getting flags that didn't make sense for a bare flush, and also the old code was firing for FUA bios, for which we don't need to send a flush to the backing device. This was causing data corruption somehow - the mechanism was never determined, but this patch fixes it for the users that were seeing it. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
btree_sort_fixup() was overly clever, because it was trying to avoid pulling a key off the btree iterator in more than one place. This led to a really obscure bug where we'd break early from the loop in btree_sort_fixup() if the current key overlapped with keys in more than one older set, and the next key it overlapped with was zero size. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
GFP_NOIO means we could be getting called recursively - mca_alloc() -> mca_data_alloc() - definitely can't use mutex_lock(bucket_lock) then. Whoops. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
schedule_timeout() != schedule_timeout_uninterruptible() Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
bch_journal_meta() was missing the flush to make the journal write actually go down (instead of waiting up to journal_delay_ms)... Whoops Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
Background writeback works by scanning the btree for dirty data and adding those keys into a fixed size buffer, then for each dirty key in the keybuf writing it to the backing device. When read_dirty() finishes and it's time to scan for more dirty data, we need to wait for the outstanding writeback IO to finish - they still take up slots in the keybuf (so that foreground writes can check for them to avoid races) - without that wait, we'll continually rescan when we'll be able to add at most a key or two to the keybuf, and that takes locks that starves foreground IO. Doh. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
Fix drivers/md/bcache/btree.c: In function ‘bch_btree_node_read’: drivers/md/bcache/btree.c:259: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘size_t’ Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
The journal replay code didn't handle this case, causing it to go into an infinite loop... Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Gabriel de Perthuis authored
sysfs attributes with unusual characters have crappy failure modes in Squeeze (udev 164); later versions of udev are unaffected. This should make these characters more unusual. Signed-off-by:
Gabriel de Perthuis <g2p.code@gmail.com> Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
That switch statement was obviously wrong, leading to some sort of weird spinning on rare occasion with discards enabled... Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: linux-stable <stable@vger.kernel.org> # >= v3.10 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kent Overstreet authored
The memcpy() in bio_copy_data() was using the wrong offset vars, leading to data corruption in weird unusual setups. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-stable <stable@vger.kernel.org> # >= v3.9 Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Russell King authored
Fix a bug that was introduced in commit c4c11dd1 ("drm/i2c: tda998x: add video and audio input configuration") when Sebastian cleaned up my original patch. Without this being fixed, audio is muted when the display is turned off, never to be re-enabled. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Darren Etheridge <detheridge@ti.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Davidlohr Bueso authored
Currently, IPC mechanisms do security and auditing related checks under RCU. However, since security modules can free the security structure, for example, through selinux_[sem,msg_queue,shm]_free_security(), we can race if the structure is freed before other tasks are done with it, creating a use-after-free condition. Manfred illustrates this nicely, for instance with shared mem and selinux: -> do_shmat calls rcu_read_lock() -> do_shmat calls shm_object_check(). Checks that the object is still valid - but doesn't acquire any locks. Then it returns. -> do_shmat calls security_shm_shmat (e.g. selinux_shm_shmat) -> selinux_shm_shmat calls ipc_has_perm() -> ipc_has_perm accesses ipc_perms->security shm_close() -> shm_close acquires rw_mutex & shm_lock -> shm_close calls shm_destroy -> shm_destroy calls security_shm_free (e.g. selinux_shm_free_security) -> selinux_shm_free_security calls ipc_free_security(&shp->shm_perm) -> ipc_free_security calls kfree(ipc_perms->security) This patch delays the freeing of the security structures after all RCU readers are done. Furthermore it aligns the security life cycle with that of the rest of IPC - freeing them based on the reference counter. For situations where we need not free security, the current behavior is kept. Linus states: "... the old behavior was suspect for another reason too: having the security blob go away from under a user sounds like it could cause various other problems anyway, so I think the old code was at least _prone_ to bugs even if it didn't have catastrophic behavior." I have tested this patch with IPC testcases from LTP on both my quad-core laptop and on a 64 core NUMA server. In both cases selinux is enabled, and tests pass for both voluntary and forced preemption models. While the mentioned races are theoretical (at least no one as reported them), I wanted to make sure that this new logic doesn't break anything we weren't aware of. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Acked-by:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 23 Sep, 2013 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging fixes from Greg KH: "Here are a number of small staging tree and iio driver fixes. Nothing major, just lots of little things" * tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits) iio:buffer_cb: Add missing iio_buffer_init() iio: Prevent race between IIO chardev opening and IIO device free iio: fix: Keep a reference to the IIO device for open file descriptors iio: Stop sampling when the device is removed iio: Fix crash when scan_bytes is computed with active_scan_mask == NULL iio: Fix mcp4725 dev-to-indio_dev conversion in suspend/resume iio: Fix bma180 dev-to-indio_dev conversion in suspend/resume iio: Fix tmp006 dev-to-indio_dev conversion in suspend/resume iio: iio_device_add_event_sysfs() bugfix staging: iio: ade7854-spi: Fix return value staging:iio:hmc5843: Fix measurement conversion iio: isl29018: Fix uninitialized value staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular and buffer enabled for built in dummy driver. iio: at91: fix adc_clk overflow staging: line6: add bounds check in snd_toneport_source_put() Staging: comedi: Fix dependencies for drivers misclassified as PCI staging: r8188eu: Adjust RX gain staging: r8188eu: Fix smatch warning in core/rtw_ieee80211. staging: r8188eu: Fix smatch error in core/rtw_mlme_ext.c staging: r8188eu: Fix Smatch off-by-one warning in hal/rtl8188e_hal_init.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 3.12-rc2. One is a revert of a EHCI change that isn't quite ready for 3.12. Others are minor things, gadget fixes, Kconfig fixes, and some quirks and documentation updates. All have been in linux-next for a bit" * tag 'usb-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: pl2303: distinguish between original and cloned HX chips USB: Faraday fotg210: fix email addresses USB: fix typo in usb serial simple driver Kconfig Revert "USB: EHCI: support running URB giveback in tasklet context" usb: s3c-hsotg: do not disconnect gadget when receiving ErlySusp intr usb: s3c-hsotg: fix unregistration function usb: gadget: f_mass_storage: reset endpoint driver data when disabled usb: host: fsl-mph-dr-of: Staticize local symbols usb: gadget: f_eem: Staticize eem_alloc usb: gadget: f_ecm: Staticize ecm_alloc usb: phy: omap-usb3: Fix return value usb: dwc3: gadget: avoid memory leak when failing to allocate all eps usb: dwc3: remove extcon dependency usb: gadget: add '__ref' for rndis_config_register() and cdc_config_register() usb: dwc3: pci: add support for BayTrail usb: gadget: cdc2: fix conversion to new interface of f_ecm usb: gadget: fix a bug and a WARN_ON in dummy-hcd usb: gadget: mv_u3d_core: fix violation of locking discipline in mv_u3d_ep_disable()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: - some small fixes for msm and exynos - a regression revert affecting nouveau users with old userspace - intel pageflip deadlock and gpu hang fixes, hsw modesetting hangs * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) Revert "drm: mark context support as a legacy subsystem" drm/i915: Don't enable the cursor on a disable pipe drm/i915: do not update cursor in crtc mode set drm/exynos: fix return value check in lowlevel_buffer_allocate() drm/exynos: Fix address space warnings in exynos_drm_fbdev.c drm/exynos: Fix address space warning in exynos_drm_buf.c drm/exynos: Remove redundant OF dependency drm/msm: drop unnecessary set_need_resched() drm/i915: kill set_need_resched drm/msm: fix potential NULL pointer dereference drm/i915/dvo: set crtc timings again for panel fixed modes drm/i915/sdvo: Robustify the dtd<->drm_mode conversions drm/msm: workaround for missing irq drm/msm: return -EBUSY if bo still active drm/msm: fix return value check in ERR_PTR() drm/msm: fix cmdstream size check drm/msm: hangcheck harder drm/msm: handle read vs write fences drm/i915/sdvo: Fully translate sync flags in the dtd->mode conversion drm/i915: Use proper print format for debug prints ...
-
- 22 Sep, 2013 3 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block IO fixes from Jens Axboe: "After merge window, no new stuff this time only a collection of neatly confined and simple fixes" * 'for-3.12/core' of git://git.kernel.dk/linux-block: cfq: explicitly use 64bit divide operation for 64bit arguments block: Add nr_bios to block_rq_remap tracepoint If the queue is dying then we only call the rq->end_io callout. This leaves bios setup on the request, because the caller assumes when the blk_execute_rq_nowait/blk_execute_rq call has completed that the rq->bios have been cleaned up. bio-integrity: Fix use of bs->bio_integrity_pool after free blkcg: relocate root_blkg setting and clearing block: Convert kmalloc_node(...GFP_ZERO...) to kzalloc_node(...) block: trace all devices plug operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "These are mostly bug fixes and a two small performance fixes. The most important of the bunch are Josef's fix for a snapshotting regression and Mark's update to fix compile problems on arm" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (25 commits) Btrfs: create the uuid tree on remount rw btrfs: change extent-same to copy entire argument struct Btrfs: dir_inode_operations should use btrfs_update_time also btrfs: Add btrfs: prefix to kernel log output btrfs: refuse to remount read-write after abort Btrfs: btrfs_ioctl_default_subvol: Revert back to toplevel subvolume when arg is 0 Btrfs: don't leak transaction in btrfs_sync_file() Btrfs: add the missing mutex unlock in write_all_supers() Btrfs: iput inode on allocation failure Btrfs: remove space_info->reservation_progress Btrfs: kill delay_iput arg to the wait_ordered functions Btrfs: fix worst case calculator for space usage Revert "Btrfs: rework the overcommit logic to be based on the total size" Btrfs: improve replacing nocow extents Btrfs: drop dir i_size when adding new names on replay Btrfs: replay dir_index items before other items Btrfs: check roots last log commit when checking if an inode has been logged Btrfs: actually log directory we are fsync()'ing Btrfs: actually limit the size of delalloc range Btrfs: allocate the free space by the existed max extent size when ENOSPC ...
-
Anatol Pomozov authored
'samples' is 64bit operant, but do_div() second parameter is 32. do_div silently truncates high 32 bits and calculated result is invalid. In case if low 32bit of 'samples' are zeros then do_div() produces kernel crash. Signed-off-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 21 Sep, 2013 19 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-fixes-for-3.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for 3.12 A series of wrong 'struct dev' assumptions in suspend/resume callbacks following on from this issue being identified in a new driver review. One to watch out for in future. A number of driver specific fixes 1) at91 - fix a overflow in clock rate computation 2) dummy - Kconfig dependency issue 3) isl29018 - uninitialized value 4) hmc5843 - measurement conversion bug introduced by recent cleanup. 5) ade7854-spi - wrong return value. Some IIO core fixes 1) Wrong value picked up for event code creation for a modified channel 2) A null dereference on failure to initialize a buffer after no buffer has been in use, when using the available_scan_masks approach. 3) Sampling not stopped when a device is removed. Effects forced removal such as hot unplugging. 4) Prevent device going away if a chrdev is still open in userspace. 5) Prevent race on chardev opening and device being freed. 6) Add a missing iio_buffer_init in the call back buffer. These last few are the first part of a set from Lars-Peter Clausen who has been taking a closer look at our removal paths and buffer handling than anyone has for quite some time.
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfix from Trond Myklebust: "Fix a regression due to incorrect sharing of gss auth caches" * tag 'nfs-for-3.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: RPCSEC_GSS: fix crash on destroying gss auth
-
Jun'ichi Nomura authored
Adding the number of bios in a remapped request to 'block_rq_remap' tracepoint. Request remapper clones bios in a request to track the completion status of each bio. So the number of bios can be useful information for investigation. Related discussions: http://www.redhat.com/archives/dm-devel/2013-August/msg00084.html http://www.redhat.com/archives/dm-devel/2013-September/msg00024.htmlSigned-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Acked-by:
Mike Snitzer <snitzer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Josef Bacik authored
Users have been complaining of the uuid tree stuff warning that there is no uuid root when trying to do snapshot operations. This is because if you mount -o ro we will not create the uuid tree. But then if you mount -o rw,remount we will still not create it and then any subsequent snapshot/subvol operations you try to do will fail gloriously. Fix this by creating the uuid_root on remount rw if it was not already there. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Mark Fasheh authored
btrfs_ioctl_file_extent_same() uses __put_user_unaligned() to copy some data back to it's argument struct. Unfortunately, not all architectures provide __put_user_unaligned(), so compiles break on them if btrfs is selected. Instead, just copy the whole struct in / out at the start and end of operations, respectively. Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Guangyu Sun authored
Commit 2bc55652 (Btrfs: don't update atime on RO subvolumes) ensures that the access time of an inode is not updated when the inode lives in a read-only subvolume. However, if a directory on a read-only subvolume is accessed, the atime is updated. This results in a write operation to a read-only subvolume. I believe that access times should never be updated on read-only subvolumes. To reproduce: # mkfs.btrfs -f /dev/dm-3 (...) # mount /dev/dm-3 /mnt # btrfs subvol create /mnt/sub Create subvolume '/mnt/sub' # mkdir /mnt/sub/dir # echo "abc" > /mnt/sub/dir/file # btrfs subvol snapshot -r /mnt/sub /mnt/rosnap Create a readonly snapshot of '/mnt/sub' in '/mnt/rosnap' # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:21:49.389157126 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 # ls /mnt/rosnap/dir file # stat /mnt/rosnap/dir File: `/mnt/rosnap/dir' Size: 8 Blocks: 0 IO Block: 4096 directory Device: 16h/22d Inode: 257 Links: 1 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2013-09-11 07:22:56.797151670 -0400 Modify: 2013-09-11 07:22:02.330156079 -0400 Change: 2013-09-11 07:22:02.330156079 -0400 Reported-by:
Koen De Wit <koen.de.wit@oracle.com> Signed-off-by:
Guangyu Sun <guangyu.sun@oracle.com> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Frank Holton authored
The kernel log entries for device label %s and device fsid %pU are missing the btrfs: prefix. Add those here. Signed-off-by:
Frank Holton <fholton@gmail.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
David Sterba authored
It's still possible to flip the filesystem into RW mode after it's remounted RO due to an abort. There are lots of places that check for the superblock error bit and will not write data, but we should not let the filesystem appear read-write. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
chandan authored
This patch makes it possible to set BTRFS_FS_TREE_OBJECTID as the default subvolume by passing a subvolume id of 0. Signed-off-by:
chandan <chandan@linux.vnet.ibm.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Filipe David Borba Manana authored
In btrfs_sync_file(), if the call to btrfs_log_dentry_safe() returns a negative error (for e.g. -ENOMEM via btrfs_log_inode()), we would return without ending/freeing the transaction. Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Stefan Behrens authored
The BUG() was replaced by btrfs_error() and return -EIO with the patch "get rid of one BUG() in write_all_supers()", but the missing mutex_unlock() was overlooked. The 0-DAY kernel build service from Intel reported the missing unlock which was found by the coccinelle tool: fs/btrfs/disk-io.c:3422:2-8: preceding lock on line 3374 Signed-off-by:
Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
We don't do the iput when we fail to allocate our delayed delalloc work in __start_delalloc_inodes, fix this. Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
This isn't used for anything anymore, just remove it. Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
This is a left over of how we used to wait for ordered extents, which was to grab the inode and then run filemap flush on it. However if we have an ordered extent then we already are holding a ref on the inode, and we just use btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on the inode to start work on the ordered extent. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
Forever ago I made the worst case calculator say that we could potentially split into 3 blocks for every level on the way down, which isn't right. If we split we're only going to get two new blocks, the one we originally cow'ed and the new one we're going to split. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
This reverts commit 70afa399. It is causing performance issues and wasn't actually correct. There were problems with the way we flushed delalloc and that was the real cause of the early enospc. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
Various people have hit a deadlock when running btrfs/011. This is because when replacing nocow extents we will take the i_mutex to make sure nobody messes with the file while we are replacing the extent. The problem is we are already holding a transaction open, which is a locking inversion, so instead we need to save these inodes we find and then process them outside of the transaction. Further we can't just lock the inode and assume we are good to go. We need to lock the extent range and then read back the extent cache for the inode to make sure the extent really still points at the physical block we want. If it doesn't we don't have to copy it. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
So if we have dir_index items in the log that means we also have the inode item as well, which means that the inode's i_size is correct. However when we process dir_index'es we call btrfs_add_link() which will increase the directory's i_size for the new entry. To fix this we need to just set the dir items i_size to 0, and then as we find dir_index items we adjust the i_size. btrfs_add_link() will do it for new entries, and if the entry already exists we can just add the name_len to the i_size ourselves. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
A user reported a bug where his log would not replay because he was getting -EEXIST back. This was because he had a file moved into a directory that was logged. What happens is the file had a lower inode number, and so it is processed first when replaying the log, and so we add the inode ref in for the directory it was moved to. But then we process the directories DIR_INDEX item and try to add the inode ref for that inode and it fails because we already added it when we replayed the inode. To solve this problem we need to just process any DIR_INDEX items we have in the log first so this all is taken care of, and then we can replay the rest of the items. With this patch my reproducer can remount the file system properly instead of erroring out. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-