Skip to content

L
linux
Switch branch/tag
  1. 17 Jun, 2015 6 commits
    • Lorenzo Pieralisi's avatar
      ARM: kvm: psci: fix handling of unimplemented functions · e2d99736
      Lorenzo Pieralisi authored 
      According to the PSCI specification and the SMC/HVC calling
convention, PSCI function_ids that are not implemented must
return NOT_SUPPORTED as return value.

Current KVM implementation takes an unhandled PSCI function_id
as an error and injects an undefined instruction into the guest
if PSCI implementation is called with a function_id that is not
handled by the resident PSCI version (ie it is not implemented),
which is not the behaviour expected by a guest when calling a
PSCI function_id that is not implemented.

This patch fixes this issue by returning NOT_SUPPORTED whenever
the kvm PSCI call is executed for a function_id that is not
implemented by the PSCI kvm layer.

Cc: <stable@vger.kernel.org> # 3.18+
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Acked-by: default avatarSudeep Holla <sudeep.holla@arm.com>
Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      e2d99736
    • Alex Bennée's avatar
      KVM: arm64: fix misleading comments in save/restore · 921ef1e1
      Alex Bennée authored 
      The elr_el2 and spsr_el2 registers in fact contain the processor state
before entry into EL2. In the case of guest state it could be in either
el0 or el1.
Signed-off-by: default avatarAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      921ef1e1
    • Kim Phillips's avatar
      KVM: arm/arm64: Enable the KVM-VFIO device · 8889583c
      Kim Phillips authored 
      The KVM-VFIO device is used by the QEMU VFIO device. It is used to
record the list of in-use VFIO groups so that KVM can manipulate
them.
Signed-off-by: default avatarKim Phillips <kim.phillips@linaro.org>
Signed-off-by: default avatarEric Auger <eric.auger@linaro.org>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      8889583c
    • Christoffer Dall's avatar
      arm/arm64: KVM: Properly account for guest CPU time · 1b3d546d
      Christoffer Dall authored 
      Until now we have been calling kvm_guest_exit after re-enabling
interrupts when we come back from the guest, but this has the
unfortunate effect that CPU time accounting done in the context of timer
interrupts occurring while the guest is running doesn't properly notice
that the time since the last tick was spent in the guest.

Inspired by the comment in the x86 code, move the kvm_guest_exit() call
below the local_irq_enable() call and change __kvm_guest_exit() to
kvm_guest_exit(), because we are now calling this function with
interrupts enabled.  We have to now explicitly disable preemption and
not enable preemption before we've called kvm_guest_exit(), since
otherwise we could be preempted and everything happening before we
eventually get scheduled again would be accounted for as guest time.

At the same time, move the trace_kvm_exit() call outside of the atomic
section, since there is no reason for us to do that with interrupts
disabled.
Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      1b3d546d
    • Tiejun Chen's avatar
      kvm: remove one useless check extension · ea2c6d97
      Tiejun Chen authored 
      We already check KVM_CAP_IRQFD in generic once enable CONFIG_HAVE_KVM_IRQFD,

kvm_vm_ioctl_check_extension_generic()
    |
    + switch (arg) {
    +   ...
    +   #ifdef CONFIG_HAVE_KVM_IRQFD
    +       case KVM_CAP_IRQFD:
    +   #endif
    +   ...
    +   return 1;
    +   ...
    + }
    |
    + kvm_vm_ioctl_check_extension()

So its not necessary to check this in arch again, and also fix one typo,
s/emlation/emulation.
Signed-off-by: default avatarTiejun Chen <tiejun.chen@intel.com>
Acked-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
      ea2c6d97
    • Marc Zyngier's avatar
      arm: KVM: force execution of HCPTR access on VM exit · 85e84ba3
      Marc Zyngier authored 
      On VM entry, we disable access to the VFP registers in order to
perform a lazy save/restore of these registers.

On VM exit, we restore access, test if we did enable them before,
and save/restore the guest/host registers if necessary. In this
sequence, the FPEXC register is always accessed, irrespective
of the trapping configuration.

If the guest didn't touch the VFP registers, then the HCPTR access
has now enabled such access, but we're missing a barrier to ensure
architectural execution of the new HCPTR configuration. If the HCPTR
access has been delayed/reordered, the subsequent access to FPEXC
will cause a trap, which we aren't prepared to handle at all.

The same condition exists when trapping to enable VFP for the guest.

The fix is to introduce a barrier after enabling VFP access. In the
vmexit case, it can be relaxed to only takes place if the guest hasn't
accessed its view of the VFP registers, making the access to FPEXC safe.

The set_hcptr macro is modified to deal with both vmenter/vmexit and
vmtrap operations, and now takes an optional label that is branched to
when the guest hasn't touched the VFP registers.
Reported-by: default avatarVikram Sethi <vikrams@codeaurora.org>
Cc: stable@kernel.org	# v3.9+
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      85e84ba3
  3. 09 Jun, 2015 2 commits
  5. 19 May, 2015 16 commits
  7. 11 May, 2015 1 commit
  9. 08 May, 2015 15 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7