This patch allows a virtio driver to use VIRTIO_DEV_ANY_ID for the
device id. This will be used by a test module that can be bound to
any virtio device.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This bug never appeared, since all current virtio drivers use
VIRTIO_DEV_ANY_ID for the vendor field. If a real vendor would be used,
the check in virtio_id_match is wrong - it returns 0 if
id->vendor == dev->id.vendor.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

If the device fills less than 4 bytes of our random buffer, we'll
BUG_ON.  It's nicer to handle the case where it partially fills the
buffer (the protocol doesn't explicitly bad that).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The remove member of the virtio_driver structure uses __devexit_p(), so
the remove function itself should be marked with __devexit.  And where
there be __devexit on the remove, so is there __devinit on the probe.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Add a new feature flag for indirect ring entries. These are ring
entries which point to a table of buffer descriptors.

The idea here is to increase the ring capacity by allowing a larger
effective ring size whereby the ring size dictates the number of
requests that may be outstanding, rather than the size of those
requests.

This should be most effective in the case of block I/O where we can
potentially benefit by concurrently dispatching a large number of
large requests. Even in the simple case of single segment block
requests, this results in a threefold increase in ring capacity.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Drivers don't add transport features to their table, so we
shouldn't check these with virtio_check_driver_offered_feature().

We could perhaps add an ->offered_feature() virtio_config_op,
but that perhaps that would be overkill for a consitency check
like this.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Each device negotiates feature bits; expose these in sysfs to help
diagnostics and debugging.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This implements optional MSI-X support in virtio_pci.
MSI-X is used whenever the host supports at least 2 MSI-X
vectors: 1 for configuration changes and 1 for virtqueues.
Per-virtqueue vectors are allocated if enough vectors
available.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ whitespace, style)

This reorganizes virtio-pci code in vp_interrupt slightly, so that
it's easier to add per-vq MSI support on top.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This replaces find_vq/del_vq with find_vqs/del_vqs virtio operations,
and updates all drivers. This is needed for MSI support, because MSI
needs to know the total number of vectors upfront.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (+ lguest/9p compile fixes)

Add a linked list of all virtqueues for a virtio device: this helps for
debugging and is also needed for upcoming interface change.

Also, add a "name" field for clearer debug messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Virtio devices are supposed to negotiate features before they start using
the device, but the current code doesn't do this.  This is because the
driver's probe() function invariably has to add buffers to a virtqueue,
or probe the disk (virtio_blk).

This currently doesn't matter since no existing backend is strict about
the feature negotiation.  But it's possible to imagine a future feature
which completely changes how a device operates: in this case, we'd need
to acknowledge it before using the device.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Fix kernel-doc warnings in recently changed block/ source code.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (87 commits)
  nilfs2: get rid of bd_mount_sem use from nilfs
  nilfs2: correct exclusion control in nilfs_remount function
  nilfs2: simplify remaining sget() use
  nilfs2: get rid of sget use for checking if current mount is present
  nilfs2: get rid of sget use for acquiring nilfs object
  nilfs2: remove meaningless EBUSY case from nilfs_get_sb function
  remove the call to ->write_super in __sync_filesystem
  nilfs2: call nilfs2_write_super from nilfs2_sync_fs
  jffs2: call jffs2_write_super from jffs2_sync_fs
  ufs: add ->sync_fs
  sysv: add ->sync_fs
  hfsplus: add ->sync_fs
  hfs: add ->sync_fs
  fat: add ->sync_fs
  ext2: add ->sync_fs
  exofs: add ->sync_fs
  bfs: add ->sync_fs
  affs: add ->sync_fs
  sanitize ->fsync() for affs
  repair bfs_write_inode(), switch bfs to simple_fsync()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: remove unecessary include of thread_info.h in entry.S
  m68knommu: enumerate INIT_THREAD fields properly
  headers_check fix: m68k, swab.h
  arch/m68knommu: Convert #ifdef DEBUG printk(KERN_DEBUG to pr_debug(
  m68knommu: remove obsolete reset code
  m68knommu: move CPU reset code for the 5272 ColdFire into its platform code
  m68knommu: move CPU reset code for the 528x ColdFire into its platform code
  m68knommu: move CPU reset code for the 527x ColdFire into its platform code
  m68knommu: move CPU reset code for the 523x ColdFire into its platform code
  m68knommu: move CPU reset code for the 520x ColdFire into its platform code
  m68knommu: add CPU reset code for the 532x ColdFire
  m68knommu: add CPU reset code for the 5249 ColdFire
  m68knommu: add CPU reset code for the 5206e ColdFire
  m68knommu: add CPU reset code for the 5206 ColdFire
  m68knommu: add CPU reset code for the 5407 ColdFire
  m68knommu: add CPU reset code for the 5307 ColdFire
  m68knommu: merge system reset for code ColdFire 523x family
  m68knommu: fix system reset for ColdFire 527x family

zalloc_cpumask_var already cleared it.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

So we make sure MAXSMP gets a cleared cpumask
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 925d519a ("perf_counter:
unify and fix delayed counter wakeup") added global definitions.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This will remove every bd_mount_sem use in nilfs.

The intended exclusion control was replaced by the previous patch
("nilfs2: correct exclusion control in nilfs_remount function") for
nilfs_remount(), and this patch will replace remains with a new mutex
that this inserts in nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

nilfs_remount() changes mount state of a superblock instance.  Even
though nilfs accesses other superblock instances during mount or
remount, the mount state was not properly protected in
nilfs_remount().

Moreover, nilfs_remount() has a lock order reversal problem;
nilfs_get_sb() holds:

  1. bdev->bd_mount_sem
  2. sb->s_umount  (sget acquires)

and nilfs_remount() holds:

  1. sb->s_umount  (locked by the caller in vfs)
  2. bdev->bd_mount_sem

To avoid these problems, this patch divides a semaphore protecting
super block instances from nilfs->ns_sem, and applies it to the mount
state protection in nilfs_remount().

With this change, bd_mount_sem use is removed from nilfs_remount() and
the lock order reversal will be resolved.  And the new rw-semaphore,
nilfs->ns_super_sem will properly protect the mount state except the
modification from nilfs_error function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This simplifies the test function passed on the remaining sget()
callsite in nilfs.

Instead of checking mount type (i.e. ro-mount/rw-mount/snapshot mount)
in the test function passed to sget(), this patch first looks up the
nilfs_sb_info struct which the given mount type matches, and then
acquires the super block instance holding the nilfs_sb_info.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This stops using sget() for checking if an r/w-mount or an r/o-mount
exists on the device.  This elimination uses a back pointer to the
current mount added to nilfs object.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

This will change the way to obtain nilfs object in nilfs_get_sb()
function.

Previously, a preliminary sget() call was performed, and the nilfs
object was acquired from a super block instance found by the sget()
call.

This patch, instead, instroduces a new dedicated function
find_or_create_nilfs(); as the name implies, the function finds an
existent nilfs object from a global list or creates a new one if no
object is found on the device.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The following EBUSY case in nilfs_get_sb() is meaningless.  Indeed,
this error code is never returned to the caller.

    if (!s->s_root) {
          ...
    } else if (!(s->s_flags & MS_RDONLY)) {
        err = -EBUSY;
    }

This simply removes the else case.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Now that all filesystems provide ->sync_fs methods we can change
__sync_filesystem to only call ->sync_fs.

This gives us a clear separation between periodic writeouts which
are driven by ->write_super and data integrity syncs that go
through ->sync_fs. (modulo file_fsync which is also going away)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The call to ->write_super from __sync_filesystem will go away, so make
sure nilfs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The call to ->write_super from __sync_filesystem will go away, so make
sure jffs2 performs the same actions from inside ->sync_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs, and reimplement
->write_super ontop of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a ->sync_fs method for data integrity syncs.  Factor out common code
between affs_put_super, affs_write_super and the new affs_sync_fs into
a helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

unfortunately, for affs (especially for affs directories) we have
no real way to keep track of metadata ownership.  So we have to
do more or less what file_fsync() does, but we do *not* need to
call write_super() there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Missing conversion to host-endian before doing shifts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>