- 27 Aug, 2011 17 commits
-
-
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Julia Lawall authored
Convert array index from the loop bound to the loop index. A simplified version of the semantic patch that fixes this problem is as // <smpl> @@ expression e1,e2,ar; @@ for(e1 = 0; e1 < e2; e1++) { <... ar[ - e2 + e1 ] ...> } // </smpl> Signed-off-by:Julia Lawall <julia@diku.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Julian Scheel authored
[media] Add support for new revision of KNC 1 DVB-C cards. Using tda10024 instead of tda10023, which is compatible to tda10023 driver Signed-off-by:
Julian Scheel <julian@jusst.de> Signed-off-by:
-
Benjamin Larsson authored
Signed-off-by:
Benjamin Larsson <benjamin@southpole.se> Signed-off-by:
-
Malcolm Priestley authored
Driver for Kworld UB499-2T (id 1b80:e409) The device driver has been named it913x, so that support for other family members can be added later. TODOs Firmware support for other it913x devices. Remote control support, there are two known types. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> [mchehab@redhat.com: Fix a merge conflict] Signed-off-by:
-
Malcolm Priestley authored
Firmware information for Kworld UB499-2T T09 based on IT913x series. This device uses file dvb-usb-it9137-01.fw. Signed-off-by:
-
Malcolm Priestley authored
Fronted and Tuner Driver for ITE IT913x Series with inital support for IT9137 integrated demodulator and tuner device. The driver is loosely based on AF9035 series. However, support is not intended for this device specificity. The IT9137 tuner has been tested on UHF bands, but VHF has only been simulated. Possible TODO the tuner sections may be separated from the main driver. All future devices should use the it913x_fe_script_loader for other tuner devices. Signed-off-by:
-
Doron Cohen authored
Siano modules already had sms_dbg flag which is a module parameter which sets the debug mode so module prints messages to dmesg for debugging. The variable was static therefore apply only to the file which defines the module. In modules as smsmdtv.ko that contain a few files, the debug flag applied only for functions in that main file. flag was changed to be non-static and therefore can be accessed by all module files (although it is still not exported out of the module). Signed-off-by:
Doron Cohen <doronc@siano-ms.com> Signed-off-by:
-
Jarod Wilson authored
Add note about recent updates coming from Microsoft's publicly available specs on Windows Media Center remotes and receivers/transmitters. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
Rather than dumping out hex values, lets print the actual calculated frequency and period the hardware has been configured for. After this [ 2643.276215] mceusb 3-1:1.0: tx data: 9f 07 (length=2) [ 2643.276218] mceusb 3-1:1.0: Get carrier mode and freq [ 2643.277206] mceusb 3-1:1.0: rx data: 9f 06 01 42 (length=4) [ 2643.277209] mceusb 3-1:1.0: Got carrier of 37037 Hz (period 27us) Matches up perfectly with the table in Microsoft's docs. Of course, I've noticed on one of my devices that the MS-recommended default value of 1 for carrier pre-scaler and 66 for carrier period was butchered, and instead of converting 66 to hex (0x42 like above), they put in 0x66, so the hardware reports a default carrier of 24390Hz. Fortunately, I guess, this particular device is rx-only, but I wouldn't put it past other hw to screw up here too. Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
According to the specs, you can read the number of tx ports, number of rx sensors, which tx ports have cables plugged into them, and which rx sensors are active. In practice, most of my devices do seem to report sane values for tx ports and rx sensors (but not all -- one without any tx ports reports having them), and most report the active sensor correctly, but only one of eight reports cabled tx ports correctly. So for the most part, this is just for informational purposes. Signed-off-by:
-
Jarod Wilson authored
Supposedly, there are essentially three different classes of devices that are compatible with Microsoft's specs. First are the "legacy" devices, which are built using Microsoft-provided hardware specs and firmware. Second are "emulator" devices, which are built using custom hardware and firmware, written to emulate Microsoft's firmware. Third are "port" devices, which have their own device driver and firmware, which provides compatible data to higher levels of the stack. >From what I can tell, things like nuvoton-cir and fintek-cir are essentially "port" devices -- their raw IR buffer format is very similar to that of the mceusb devices. Now, within the mceusb driver, we have three different "generations", which at first, seemed like maybe they mapped to emulator versions. Unfortuantely, every single device I have responds "illegal command" to the query to get firmware emulator version from the hardware, which means they're either all emulator version 1, or they're legacy devices, and our different "generations" aren't at all related here. Though in theory, its possible the gen1 devices are "legacy" devices and the rest are emulator v1. There are some useful features of the v2 interface I was hoping to play with, but alas... Signed-off-by:
-
Jarod Wilson authored
According to MS docs, the device firmware may halt after receiving an unknown instruction, but that it should be possible to tell the firmware to continue running by simply sending a device resume command. So lets do that. Signed-off-by:
-
Jarod Wilson authored
Its not uncommon for folks to force these bits enabled, because people do want to wake their htpc kit via their remote. Lets just set the bits for 'em. Signed-off-by:
-
Jarod Wilson authored
Sometimes the init routine is blasting commands out to the hardware faster than it can reply. Throw a brief delay in there to give the hardware a chance to reply before we send the next command. Signed-off-by:
-
Jarod Wilson authored
I was recently pointed to the document titled Windows-Media-Center-RC-IR-Collection-Green-Button-Specification-03-08-2011-V2.pdf which as of this writing, is publicly available from download.microsoft.com. It covers a LOT of the gaps in the mceusb driver, which to this point, was written almost entirely by reverse-engineering. First up, I'm updating the defines for all the MCE commands and responses to match their names in the spec. More to come... Signed-off-by:
-
- 07 Aug, 2011 2 commits
-
-
Jose Alberto Reguero authored
tda827x is currently taking the demod IF frequency into account while seeking for the proper tuner range. This is wrong, as the demod IF frequency has nothing to do with the tuner PLL. Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Luiz Ramos authored
Hello, When migrating from Slackware 13.1 to 13.37 (kernel 2.6.33.x to 2.6.37.6), there was some sort of regression with the external webcam installed at the notebook (0x45:6128, SN9C325+OM6802). In the version 2.6.37.6, the images got *very* dark, making the webcam almost unusable, unless if used with direct sunlight. Tracing back what happened, I concluded that changeset 0e4d413a caused some sort of odd effects - including this - to this specific model. Signed-off-by:
Luiz Carlos Ramos <lramos.prof@yahoo.com.br> Acked-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
- 06 Aug, 2011 9 commits
-
-
Jarod Wilson authored
There are folks with flaky imon hardware out there that doesn't always respond to requests to write to their displays for some reason, which can flood logs quickly when something like lcdproc is trying to constantly update the display, so lets rate-limit all that error spew. Signed-off-by:
-
Ming Lei authored
If the bus has been reset on resume, set the alternate setting to 0. This should be the default value, but some devices crash or otherwise misbehave if they don't receive a SET_INTERFACE request before any other video control request. Microdia's 0c45:6437 camera has been found to require this change or it will stop sending video data after resume. uvc_video.c] Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by:
-
Mauro Carvalho Chehab authored
This device is not using the proper demod IF. Instead of using the IF macro, it is specifying a IF frequency. This doesn't work, as xc3028 needs to load an specific SCODE for the tuner. In this case, there's no IF table for 5 MHz. Cc: stable@kernel.org Signed-off-by: -
Sakari Ailus authored
Move documentation of structures used in DQEVENT from SUBSCRIBE_EVENT to DQEVENT. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Andy Shevchenko authored
Potentially the adp1653_init_controls could return an error. In our case the error was ignored, meanwhile it means incorrect initialization of V4L2 controls. Additionally we have to free control handler structures in case of apd1653_init_controls or media_entity_init failure. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Andy Shevchenko authored
The driver requires platform_data to be present. That's why we need to check and fail in case of the absence of necessary data. Signed-off-by:
-
Olivier Grenie authored
The goal of this patch is to correct a previous patch. In case of error, the err() function should be used instead of dprintk() function. [mchehab@redhat.com: as I've replaced dprintk by deb_info, on the the previous patch, to avoid breaking bisect, I had to fix a merge conflict on this one] Signed-off-by:
Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by:
-
Olivier Grenie authored
This patch protects the common buffer access inside the dib0700 in order to manage concurrent access. This protection is done using mutex. Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Florian Mickler <florian@mickler.org> Cc: stable@kernel.org Signed-off-by:
Javier Marcet <javier@marcet.info> Signed-off-by:
Patrick Boettcher <patrick.boettcher@dibcom.fr> [mchehab@redhat.com: dprint requires 3 arguments. Replaced by dib_info] Signed-off-by:
-
Patrick Boettcher authored
This patch protects the I2C buffer access in order to manage concurrent access. This protection is done using mutex. Furthermore, for the dib9000, if a pid filtering command is received during the tuning, this pid filtering command is delayed to avoid any concurrent access issue. Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Florian Mickler <florian@mickler.org> Cc: stable@kernel.org Signed-off-by:
-
- 31 Jul, 2011 11 commits
-
-
Mauro Carvalho Chehab authored
Whan an ioctl is implemented, but the parameters are invalid, the error code should be -EINVAL. However, if the ioctl is not defined, it should return -ENOTTY instead. Reported-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Change adapter FE pointer as array of FE pointers. Signed-off-by:
-
Mauro Carvalho Chehab authored
The input stop() callback already calls the em28xx_ir_stop method. Calling it again causes an oops. Acked-by:
-
Mauro Carvalho Chehab authored
rc unregister logic were deadly broken, preventing some drivers to be removed. Among the broken things, rc_dev_uevent() is being called during device_del(), causing a data filling on an area that it is not ready anymore. Also, some drivers have a stop callback defined, that needs to be called before data removal, as it stops data polling. Acked-by:
-
Erik Andrén authored
Signed-off-by:
Erik Andrén <erik.andren@gmail.com> Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Erik Andrén authored
No functional changes on this patch. Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
Erik Andrén authored
Signed-off-by:
-
- 30 Jul, 2011 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits) [media] ir-mce_kbd-decoder: include module.h for its facilities [media] ov5642: include module.h for its facilities [media] em28xx: Fix DVB-C maxsize for em2884 [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz [media] v4l: mt9v032: Fix Bayer pattern [media] V4L: mt9m111: rewrite set_pixfmt [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear [media] V4L: initial driver for ov5642 CMOS sensor [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails [media] V4L: soc-camera: remove soc-camera bus and devices on it [media] V4L: soc-camera: un-export the soc-camera bus [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier [media] V4L: add media bus configuration subdev operations [media] V4L: soc-camera: group struct field initialisations together [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks [media] V4L: pxa-camera: switch to using standard PM hooks [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param [media] Don't OOPS if videobuf_dvb_get_frontend return NULL [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision [media] omap3isp: Support configurable HS/VS polarities ... Fix up conflicts: - arch/arm/mach-omap2/board-rx51-peripherals.c: cleanup regulator supply definitions in mach-omap2 vs OMAP3: RX-51: define vdds_csib regulator supply - drivers/staging/tm6000/tm6000-alsa.c (trivial)
-
