- 05 Apr, 2015 2 commits
-
-
Hans de Goede authored
On V2 devices the DualPoint Stick reports bare packets, these should be reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also has the INPUT_PROP_POINTING_STICK propbit set. Note that since there is no way to distinguish these packets from an external PS/2 mouse (insofar as these laptops have an external PS/2 port) this means that we will be reporting PS/2 mouse events via this evdev node too, as we've been doing in kernel 3.19 and older. This has been tested on a Dell Latitude D620 and a Dell Latitude E6400, which both have a V2 touchpad + a DualPoint Stick which reports bare packets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
Bare packets should be reported via the same evdev device independent on whether they are detected on the beginning of a packet or in the middle of a packet. This has been tested on a Dell Latitude E6400, where the DualPoint Stick reports bare packets, which get reported via dev3 when the touchpad is idle, and via dev2 when the touchpad and stick are used simultaneously. This commit fixes this inconsistency by always reporting bare packets via dev3. Note that since the come from a DualPoint Stick they really should be reported via dev2, this gets fixed in a later commit. Signed-off-by:
-
- 31 Mar, 2015 2 commits
-
-
Peter Hutterer authored
Spell out what this property means to userspace. If the property is set, all directional axes must be accelerometer axes, any other axes are left as-is. This allows an accelerometer device to e.g. have an ABS_WHEEL. It is not permitted to mix normal directional axes and accelerometer axes on the same device node. Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Acked-by:
Jiri Kosina <jkosina@suse.cz> Reviewed-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
-
Filip Ayazi authored
Commit 98dc0703 ("Input: synaptics - add quirk for Thinkpad E440") had a typo in ymax, this changes the value to the one reported by touchpad-edge-detector and mentioned in the commit. Signed-off-by:
Filip Ayazi <filipayazi@gmail.com> Signed-off-by:
-
- 23 Mar, 2015 2 commits
-
-
Ramiro Morales authored
Its ClickPad shares PNP ID "LEN2006" with the one in model E540 which is already handled by the driver (both are Haswell iterations of the Edge line, launched in 2014) but the dimensions it reports are different: $ sudo ./touchpad-edge-detector /dev/input/event3 Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event3 Move one finger around the touchpad to detect the actual edges Kernel says: x [1472..5044], y [1408..3398] Touchpad sends: x [1024..5045], y [2457..4832] /^C Fortunately we can use the board ID, which is also different, to distinguish among them. $ dmesg | grep -i synaptics psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2691, fw id: 1494646 psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 Board ID in E540 is 2722: psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2722, fw id: 1484859 (from https://launchpadlibrarian.net/179702965/BootDmesg.txt) Signed-off-by:Ramiro Morales <cramm0@gmail.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Dmitry Torokhov authored
Commit 3296f71c ("Input: ALPS - consolidate setting protocol parameters") inadvertently moved call to alps_dolphin_get_device_area() from v5 to v7 protocol, causing both protocols report incorrect maximum values for X and Y axes which resulted in crash in Synaptics X driver. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94801Reported-by:
Santiago Gala <sgala@apache.org> Reported-by:
-
- 20 Mar, 2015 1 commit
-
-
Charlie Mooney authored
Currently there are only two "tools" that can be specified by a multi-touch driver: MT_TOOL_FINGER and MT_TOOL_PEN. In working with Elan (The touch vendor) and discussing their next-gen devices it seems that it will be useful to have more tools so that their devices can give the upper layers of the stack hints as to what is touching the sensor. In particular they have new experimental firmware that can better differentiate between palms vs fingertips and would like to plumb a patch so that we can use their hints in higher-level gesture soft- ware. The firmware on the device can reasonably do a better job of palm detection because it has access to all of the raw sensor readings as opposed to just the width/pressure/etc that are exposed by the driver. As such, the firmware can characterize what a palm looks like in much finer-grained detail and this change would allow such a device to share its findings with the kernel. Signed-off-by:
Charlie Mooney <charliemooney@chromium.org> Acked-by:
-
- 16 Mar, 2015 2 commits
-
-
Dmitry Torokhov authored
This reverts commit 6ab17a84 since it, according to Benjamin, causes issues with slot assignment: E: 15.669119 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 15.954242 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 15.954242 0003 0039 0505 # EV_ABS / ABS_MT_TRACKING_ID 505 E: 15.954242 0003 0035 3851 # EV_ABS / ABS_MT_POSITION_X 3851 E: 15.954242 0003 0036 4076 # EV_ABS / ABS_MT_POSITION_Y 4076 E: 15.954242 0003 003a 0034 # EV_ABS / ABS_MT_PRESSURE 34 E: 15.954242 0001 014a 0001 # EV_KEY / BTN_TOUCH 1 E: 15.954242 0003 0000 3851 # EV_ABS / ABS_X 3851 E: 15.954242 0003 0001 4076 # EV_ABS / ABS_Y 4076 E: 15.954242 0003 0018 0034 # EV_ABS / ABS_PRESSURE 34 E: 15.954242 0001 0145 0001 # EV_KEY / BTN_TOOL_FINGER 1 E: 15.954242 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- ... (bunch of regular events)... E: 16.020614 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 16.043601 0003 0035 3873 # EV_ABS / ABS_MT_POSITION_X 3873 E: 16.043601 0003 0036 3903 # EV_ABS / ABS_MT_POSITION_Y 3903 E: 16.043601 0003 003a 0050 # EV_ABS / ABS_MT_PRESSURE 50 E: 16.043601 0003 0035 3032 # EV_ABS / ABS_MT_POSITION_X 3032 E: 16.043601 0003 0036 3832 # EV_ABS / ABS_MT_POSITION_Y 3832 E: 16.043601 0003 003a 0044 # EV_ABS / ABS_MT_PRESSURE 44 E: 16.043601 0003 0000 3032 # EV_ABS / ABS_X 3032 E: 16.043601 0003 0001 3832 # EV_ABS / ABS_Y 3832 E: 16.043601 0003 0018 0044 # EV_ABS / ABS_PRESSURE 44 E: 16.043601 0001 0145 0000 # EV_KEY / BTN_TOOL_FINGER 0 E: 16.043601 0001 014d 0001 # EV_KEY / BTN_TOOL_DOUBLETAP 1 E: 16.043601 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- E: 16.068837 0003 002f 0001 # EV_ABS / ABS_MT_SLOT 1 E: 16.068837 0003 0039 0506 # EV_ABS / ABS_MT_TRACKING_ID 506 E: 16.068837 0003 0035 3912 # EV_ABS / ABS_MT_POSITION_X 3912 E: 16.068837 0003 0036 3743 # EV_ABS / ABS_MT_POSITION_Y 3743 E: 16.068837 0003 003a 0056 # EV_ABS / ABS_MT_PRESSURE 56 E: 16.068837 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0 E: 16.068837 0003 0035 3026 # EV_ABS / ABS_MT_POSITION_X 3026 E: 16.068837 0003 0036 3708 # EV_ABS / ABS_MT_POSITION_Y 3708 E: 16.068837 0003 003a 0052 # EV_ABS / ABS_MT_PRESSURE 52 E: 16.068837 0003 0000 3026 # EV_ABS / ABS_X 3026 E: 16.068837 0003 0001 3708 # EV_ABS / ABS_Y 3708 E: 16.068837 0003 0018 0052 # EV_ABS / ABS_PRESSURE 52 E: 16.068837 0000 0000 0000 # ------------ SYN_REPORT (0) ---------- Slot 0 and 1 gets inverted in the second report above, which introduces a cursor jump. The problem is that this cursor jump is often enough to leave the current widget, and X sends the scrolling events to whoever is now under the cursor. Reported-by:
Benjamin Tissoires <btissoir@redhat.com> Reported-by:
-
Dmitry Torokhov authored
Bring in changes needed to properly handle Lenovo 2015 lineup.
-
- 09 Mar, 2015 14 commits
-
-
Benjamin Tissoires authored
Lenovo X250 has a PnpID of LEN0046, but it does not have the top software button requirement. For the record, Lenovo T450s and W541 have a PnpID of LEN200f and LEN004a, so they are not on the top software button list. Signed-off-by:
Daniel Martin <consume.noise@gmail.com> Signed-off-by:
-
Benjamin Tissoires authored
Lenovo decided to switch back to physical buttons for the trackstick on their latest series. The PNPId list was provided before they reverted back to physical buttons, so it contains the new models too. We can know from the touchpad capabilities that the touchpad has physical buttons, so removing the ids from the list is not mandatory. It is still nicer to remove the wrong ids, so start by removing the X1 Carbon 3rd gen, with the PNPId of LEN0048. Signed-off-by:
-
Benjamin Tissoires authored
The 2015 series of the Lenovo thinkpads added back the hardware buttons on top of the touchpad for the trackstick. Unfortunately, they are wired to the touchpad, and not the trackstick. Thus, they are seen as extra buttons from the kernel point of view. This leads to a problem in user space because extra buttons on synaptics devices used to be used as scroll up/down buttons. So in the end, the experience for the user is scroll events for buttons left and right when using the trackstick. Yay! Fortunately, the firmware advertises such behavior in the extended capability $10, and so we can re-route the buttons through the pass-through interface. Hallelujah-expressed-by:
-
Benjamin Tissoires authored
The 2015 series of the Lenovo thinkpads added back the hardware buttons on top of the touchpad for the trackstick. Unfortunately, Lenovo used the PNPIDs that are supposed to be "5 buttons" touchpads, so the new laptops also have the INPUT_PROP_TOPBUTTONPAD. Yay! Instead of manually removing each of the new ones, or hoping that we know all the current ones, we can consider that the PNPIDs list that were given contains touchpads that have the trackstick buttons, either physically wired to them, or emulated with the top software button property. Thanks to the extra buttons capability in query $10, we can reliably detect the physical buttons from the software ones, and so we can remove the TOPBUTTONPAD property even if it was declared as such. Signed-off-by:
-
Benjamin Tissoires authored
Newer Synaptics touchpads need to get information from the query $10. Retrieve it if available. Signed-off-by:
-
Benjamin Tissoires authored
The board id capability has been added in firmware 7.5. Cc: stable@vger.kernel.org Signed-off-by:
-
Benjamin Tissoires authored
The Fimware 8.1 has a bug in which the extra buttons are only sent when the ExtBit is 1. This should be fixed in a future FW update which should have a bump of the minor version. Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Torokhov authored
On the X1 Carbon 3rd gen (with a 2015 broadwell cpu), the physical middle button of the trackstick (attached to the touchpad serio device, of course) seems to get lost. Actually, the touchpads reports 3 extra buttons, which falls in the switch below to the '2' case. Let's handle the case of odd numbers also, so that the middle button finds its way back. Cc: stable@vger.kernel.org Signed-off-by:
-
Benjamin Tissoires authored
Post-2013 Lenovo laptops provide correct min/max dimensions, which are different with the ones currently quirked. According to https://bugzilla.kernel.org/show_bug.cgi?id=91541 the following board ids are assigned in the post-2013 touchpads: t440p/t440s: LEN0036 -> 2964/2962 t540p: LEN0034 -> 2964 Using 2961 as the common minimum makes these 3 laptops OK. We may need to update those values later if other pnp_ids has a lower board_id. Cc: stable@vger.kernel.org Signed-off-by:
-
Daniel Martin authored
Add a min/max range for board ids to the min/max coordinates quirk. This makes it possible to restrict quirks to specific models based upon their board id. The define ANY_BOARD_ID (0) serves as a wild card. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Cc: stable@vger.kernel.org Signed-off-by:
Daniel Martin <daniel.martin@secunet.com> Acked-by:
-
Daniel Martin authored
The firmware of the X240 (LEN0035, 2013/12) exposes the same values x [1232..5710], y [1156..4696] as the quirk applies. Cc: stable@vger.kernel.org Signed-off-by: -
Daniel Martin authored
Query the min dimensions even if the check SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 fails, but we know that the firmware version 8.1 is safe. With that we don't need quirks for post-2013 models anymore as they expose correct min and max dimensions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Cc: stable@vger.kernel.org Signed-off-by:
-
Daniel Martin authored
Logging the dimension values we queried and the values we use from a quirk to overwrite can be helpful for debugging. This partly relates to bug: https://bugzilla.kernel.org/show_bug.cgi?id=91541 Cc: stable@vger.kernel.org Signed-off-by: -
Daniel Martin authored
Split the function synaptics_resolution() into synaptics_resolution() and synaptics_quirks(). synaptics_resolution() will be called before synaptics_quirks() to query dimensions and resolutions before overwriting them with quirks. Cc: stable@vger.kernel.org Signed-off-by:
-
- 07 Mar, 2015 4 commits
-
-
Mathias Gottschlag authored
Apparently, the threshold for large contact area seems to be rather low on some devices, causing the touchpad to frequently freeze during normal usage. Because we do now know how we are supposed to use the value in question, this commit just drops the related code completely. Signed-off-by:
Mathias Gottschlag <mgottschlag@gmail.com> Signed-off-by:
-
Mathias Gottschlag authored
These PS/2 commands make some touchpads stop responding, so this commit adds some dummy functions to replace the generic implementation. Because scale changes were not encapsulated in a method of struct psmouse yet, this commit adds a method set_scale to psmouse. Signed-off-by:
-
Mathias Gottschlag authored
We don't know whether x_max or y_max really hold the maximum possible coordinates, and we don't know for sure whether we correctly interpret the coordinates sent by the touchpad, so we clamp the reported values to prevent confusion in userspace code. Signed-off-by:
-
Mathias Gottschlag authored
The size has in most cases already been fetched from the touchpad, the hardcoded values should have been removed. Signed-off-by:
-
- 04 Mar, 2015 2 commits
-
-
Valentin Rothberg authored
Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. Currently, plat->irqtype is only set to IRQF_TRIGGER_FALLING. This patch sets the ONESHOT flag directly in request_threaded_irq() to enforce the flag without being affected by future changes to plat->irqtype. Generated by: scripts/coccinelle/misc/irqf_oneshot.cocci Signed-off-by:
Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by:
-
Dmitry Torokhov authored
This fixes memory leak introduced by commit a09221e8Acked-by:
-
- 02 Mar, 2015 3 commits
-
-
Arnd Bergmann authored
The sun4i-ts driver has had a dependency on the thermal code with the addition of the thermal zone sensor support, but this is not currently enforced in Kconfig, so with TOUCHSCREEN_SUN4I=y, THERMAL=m and THERMAL_OF=y we get drivers/built-in.o: In function `sun4i_ts_remove': :(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' drivers/built-in.o: In function `sun4i_ts_probe': :(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' :(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' We need the dependency on THERMAL in order to ensure that this driver becomes a loadable module if the thermal support itself is modular, while the dependency on THERMAL_OF is a runtime dependency and the driver will still build if it is missing. It is entirely possible to build sun4i-ts without THERMAL_OF just to use the hwmon sensors and/or touchscreen. Fixes: 22369710 ("Input: sun4i-ts - add thermal zone sensor support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> [wens@csie.org: Fix description and Kconfig dependencies] Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Geert Uytterhoeven authored
drivers/input/mouse/cyapa_gen5.c: In function ‘cyapa_gen5_read_idac_data’: drivers/input/mouse/cyapa_gen5.c:1876: warning: ‘max_element_cnt’ may be used uninitialized in this function drivers/input/mouse/cyapa_gen5.c:1873: warning: ‘offset’ may be used uninitialized in this function If *data_size is non-zero, and idac_data_type contains an unknown type, max_element_cnt and offset will be uninitialized, and the loop will process non-existing data. However, this cannot happen (for now), as there's a test for unknown types at the top of cyapa_gen5_read_idac_data(). As no "if ... else if ..." is used in other places, remove the superfluous "if" to silence the compiler warning. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Dudley Du <dudl@cypress.com> Signed-off-by:
-
Dudley Du authored
Use asm/unaligned.h instead of linux/unaligned/access_ok.h header file to fix compiling issues such as following while doing cross platform compiling: "include/linux/unaligned/access_ok.h:7:19: error: redefinition of 'get_unaligned_le16' ... include/linux/unaligned/le_struct.h:6:19: note: previous definition of 'get_unaligned_le16' was here". Reported-by:
kbuild test robot <kbuild-all@01.org> Signed-off-by:
-
- 26 Feb, 2015 1 commit
-
-
Stefan Sauer authored
Add the parent device so that udev can show the full hierarchy. This avoids the device showing up under /devices/virtual/input instead of the i2c bus it is actually attached to. Signed-off-by:
Stefan Sauer <ensonic@google.com> Signed-off-by:
-
- 20 Feb, 2015 1 commit
-
-
Dmitry Torokhov authored
Second round of updates for 3.20.
-
- 16 Feb, 2015 6 commits
-
-
Dmitry Torokhov authored
Instead of having various protocols provide <protocol>_supported() functions, let's use IS_ENABLED() macro that works well in "if" statements. Acked-by:
-
Dmitry Torokhov authored
Merge bfin_rotary driver changes from Sonic Zhang.
-
Dmitry Torokhov authored
Introduce open and close methods for the input device to postpone enabling the device until it is needed. Acked-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Sonic Zhang authored
Use of managed resources simplifies error handling. Signed-off-by:
-
Sonic Zhang authored
Instead of using arch-specific accessors remap rotary register physical address into kernel space in probe and use standard readw and writew to access rotary MMRs. Signed-off-by:
-
Sonic Zhang authored
Newer Blackfin boards use pinctrl API to manage pins and the legacy peripherial lists are not useful on them. Let's move pin lists into platform data so older boards can still use them and newer boards can use the modern API. Signed-off-by:
-
