Otherwise userspace might be confused.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

So user can see if there's any mmc activity and if device's
charging.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

It eats too much power, and anyway it's not usefull
during boot process. Userspace can enable it later.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

GPIO15 seems to be not related to WiFi, so don't touch it.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

Fix coefficients to get actual voltage, and make
voltage_max/voltage_min looks like values for LiIon battery.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

It's very easy to press some keypad key when Z2 is closed,
so to prevent unexpected wakeups, use only 'Power' key to wake
Z2 from sleep.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>

It's not safe to disable controller if overlay(s) is enabled (results in
system hang). So we avoid to disable controller in this case. Userspace
should choose proper governor to avoid freq changing when overlay is in
use, otherwise LCD may blink.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Sascha Hauer <s.hauer@pengutronix.de> pointed that
ypos takes value of xpos due to typo.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

pxafb_overlay_init is not right place to change Z-ordering,
move it to main plane initialization.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

PXAFB overlay memory management is something messy:
- it allocates memory dynamically on open/release, and it results
  in memory allocation failure after ~1h of uptime (system does not have
  115k of physically contiguous memory)
- in release callback it tries to free memory even if it was not
  allocated.

Also driver touches FDADR1 on main plane reconfiguration, and it can cause
problems if overlay1 is enabled.

This patch attempts to fix those issues.

Patch is based on Russell King's work.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Neither pxa25x_udc, nor pxa27x_udc use gpio_vbus/gpio_vbus_inverted
anymore. Drop those two fields from udc info completely.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Stop handling gpio-vbus internally. All boards that depended on this
functionality have been converted to use gpio-vbus tranceiver. All
new boards can use it right from the start. Drop unused code.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus
tranceiver.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus
tranceiver.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Switch from handling gpio-vbus in pxa25x_udc to using standard gpio-vbus
tranceiver.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Use auto-computed shift and mult of timer with new API
clocksource_calc_mult_shift()/clockevents_calc_mult_shift().
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

set_pxa_fb_info() has been a long-standing wart in the naming scheme
of the pxa_set_xxx_info() functions.  This renames the function, and
combines set_pxa_fb_parent() with set_pxa_fb_info().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Rework of patch from 2009:
PalmZ72: Add support for OV9640 camera sensor
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.

This patch also properly frees GPIOs in case ata_host_activate() call fails.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Use gpio_request_array() / gpio_free_array(), this makes the code
cleaner and less error prone.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Use gpio_request_array() / gpio_free_array(), this makes the code cleaner and
less error prone.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Use gpio_request_array() / gpio_free_array() in backlight init and exit
functions. This makes the code cleaner and less error prone.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C64XX: Update regulator names for debugfs compatiblity on SMDK6410
  ARM: S3C64XX: Fix build with WM1190 disabled and WM1192 enabled on SMDK6410
  ARM: S3C64XX: Reduce output of s3c64xx_dma_init1()
  ARM: S3C64XX: Tone down SDHCI debugging
  ARM: S3C64XX: Add clock for i2c1
  ARM: S3C64XX: Staticise non-exported GPIO to interrupt functions
  ARM: SAMSUNG: Include devs.h in dev-uart.c to prototype devices
  ARM: S3C64XX: Fix keypad setup to configure correct number of rows
  ARM: S3C2440: Fix usage gpio bank j pin definitions on GTA02
  ARM: S5P64X0: Fix number of GPIO lines in Bank F
  ARM: S3C2440: Select missing S3C_DEV_USB_HOST on GTA02

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  davinci: cpufreq: fix section mismatch warning
  DaVinci: fix compilation warnings in <mach/clkdev.h>
  davinci: tnetv107x: fix register indexing for GPIOs numbers > 31
  davinci: da8xx/omap-l1x: add platform device for davinci-pcm-audio
  ARM: pxa/tosa: register wm9712 codec device
  ARM: pxa: enable pxa-pcm-audio on pxa210/pxa25x platform
  ARM: pxa/colibri: don't register pxa2xx-pcmcia nodes on non-colibri platforms
  ARM: pxa/tosa: drop setting LED trigger name, as it's unsupported now
  ARM: 6762/1: Update number of VIC for S5P6442 and S5PC100
  ARM: 6761/1: Update number of VIC for S5PV210
  ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores
  ARM: 6767/1: ptrace: fix register indexing in GETHBPREGS request
  ARM: 6765/1: remove obsolete comment from asm/mach/arch.h
  ARM: 6757/1: fix tlb.h induced linux/swap.h build failure

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sdio: Allow sdio operations in other threads during sdio_add_func()

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: index i shadowed in 2nd loop
  drm/nv50-nvc0: prevent multiple vm/bar flushes occuring simultanenously
  drm/nouveau: fix regression causing ttm to not be able to evict vram
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"

Index i was already used in thhe first loop
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This fixes a bug introduced by 807e8e40 ("mmc: Fix sd/sdio/mmc
initialization frequency retries") that prevented SDIO drivers from
performing SDIO commands in their probe routines -- the above patch
called mmc_claim_host() before sdio_add_func(), which causes a deadlock
if an external SDIO driver calls sdio_claim_host().

Fix tested on an OLPC XO-1.75 with libertas on SDIO.
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Reviewed-and-Tested-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

* ickle/drm-intel-fixes:
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: mailbox: resolve hang issue
  OMAP2+: PM: SmartReflex: fix memory leaks in Smartreflex driver
  arm: mach-omap2: smartreflex: fix another memory leak

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] tape: deadlock on system work queue
  [S390] keyboard: integer underflow bug
  [S390] xpram: remove __initdata attribute from module parameters

The per-vm mutex doesn't prevent this completely, a flush coming from the
BAR VM could potentially happen at the same time as one for the channel
VM.  Not to mention that if/when we get per-client/channel VM, this will
happen far more frequently.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

TTM assumes an error condition from man->func->get_node() means that
something went horribly wrong, and causes it to bail.

The driver is supposed to return 0, and leave mm_node == NULL to
signal that it couldn't allocate any memory.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Early gen3 and gen2 chipset do not have the relaxed per-surface tiling
constraints of the later chipsets, so we need to check that the GTT
alignment is correct for the new tiling. If it is not, we need to
rebind.
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Andi Kleen narrowed his GPU hangs on his Sugar Bay (SNB desktop) rev 09
down to the use of GPU semaphores, and we already know that they appear
broken up to Huron River (mobile) rev 08. (I'm optimistic that disabling
GPU semaphores is simply hiding another bug by the latency and
side-effects of the additional device interaction it introduces...)

However, use of semaphores is a massive performance improvement... Only
as long as the system remains stable. Enable at your peril.
Reported-by: Andi Kleen <andi-fd@firstfloor.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=33921Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>