Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

The ability to save the hardware context upon powering down the render
clock through PWRCTXA is only available on a couple of gen4 chipsets.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

The workaround is hideous and we are using the STORE_DWORD on all other
generations on all other rings, so use for the gen5 render ring as
well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Locally scope the crtc to where it is used.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Immediate merge for the conflicting introduction of HAS_COHERENT_RINGS.

Conflicts:
	drivers/gpu/drm/i915/i915_dma.c
	include/drm/i915_drm.h

Otherwise we can't really fix the abi-braindeadness of forcing
libva to manually wait for rendering when switching rings. Which
in turn makes implementing hw semaphores a pointless exercise
(at least for ironlake).

[Also added the relaxed fencing param to explain the jump in
numbering - relaxed fencing is in -next.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Add a missing NULL check and fix the wrong address passed to kunmap()
in i830_cleanup().

Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[danvet: added cc stable]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

We disabled this a while ago as it was inexplicably broken. However, it
now appears to work...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

The bulk of the change is to convert the growing list of rings into an
array so that the relationship between the rings and the semaphore sync
registers can be easily computed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

This will declare the machine wedged, but is better than truly wedging
the machine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Previously we enabled this for gen4, only to have to revert it due to it
causing a large number of spurious wakeups. Try again hoping that the
hardware has become more sane in the mean time...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Let's see if we've successfully cleared up all the bugs from last
time...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Magic numbers from the specs. This is supposed to allow the PLL some
variance to improve jitter performance and VCO headroom across
manufacturing and environmental variations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

... it's because setting the Pixel Multiply bits only takes effect once
the PLL is enabled and stable.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

... and do not just assume to always use pipe B.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Fixes the modesetting on the secondary panel of the Libretto W100 and
presumably many more Ironlake laptops with SDVO LVDS displays.
Reported-and-tested-by: Matthew Willoughby <mattfredwill@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

Use the hardware DDA to calculate the ratio with as much accuracy as is
possible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

If we leave the registers in a conflicting state then when we attempt
to teardown the active mode, we will not disable the pipes and planes
in the correct order -- leaving a plane reading from a disabled pipe and
possibly leading to undefined behaviour.
Reported-and-tested-by: Andy Whitcroft <apw@canonical.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32078Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

Conflicts:
	drivers/gpu/drm/i915/intel_drv.h

This workaround only applies to Ironlake.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

The pipe is always set to 8BPC, but here we were leaving whatever
previous bits were set by the BIOS in place.
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (27 commits)
  Staging: rt2870: Add USB ID for Buffalo Airstation WLI-UC-GN
  staging: easycap needs smp_lock.h, fixes build error
  Staging: batman-adv: ensure that eth_type_trans gets linear memory
  Staging: batman-adv: Don't remove interface with spinlock held
  staging: brcm80211: updated maintainers contact information
  staging: fix winbond build, needs delay.h
  Staging: line6: fix up my fixup for some sysfs attribute permissions
  Staging: zram: fix up my fixup for some sysfs attribute permissions
  Staging: udlfb: fix up my fixup for some sysfs attribute permissions
  Staging: samsung-laptop: fix up my fixup for some sysfs attribute permissions
  Staging: iio: adis16220: fix up my fixup for some sysfs attribute permissions
  Staging: frontier: fix up my fixup for some sysfs attribute permissions
  Staging: asus_oled: fix up my fixup for some sysfs attribute permissions
  staging: spectra: fix build error
  Staging: intel_sst: fix memory leak
  Staging: rtl8712: signedness bug in init
  staging: rtl8187se: Change panic to warn when RF switch turned off
  staging: comedi: fix memory leak
  Staging: quickstart: free after input_unregister_device()
  Staging: speakup: free after input_unregister_device()
  ...

Merge branch 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6

* 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  uio: Change mail address of Hans J. Koch
  driver core: prune docs about device_interface
  driver core: the development tree has switched to git

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: mfd: adjust the baud rate setting
  TTY: open/hangup race fixup
  TTY: don't allow reopen when ldisc is changing
  NET: wan/x25, fix ldisc->open retval
  TTY: ldisc, fix open flag handling
  serial8250: Mark console as CON_ANYTIME

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fix autosuspend bug in usb-serial
  USB: ehci: disable LPM and PPCD for nVidia MCP89 chips
  USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID added
  USB: yurex: add .llseek fop to file_operations
  USB: ftdi_sio: Add ID for RT Systems USB-29B radio cable
  usb: musb: do not use dma for control transfers
  usb: musb: gadget: fix compilation warning
  usb: musb: clear RXCSR_AUTOCLEAR before PIO read
  usb: musb: unmap dma buffer when switching to PIO
  xhci: Don't let the USB core disable SuperSpeed ports.
  xhci: Setup array of USB 2.0 and USB 3.0 ports.
  xhci: Fix reset-device and configure-endpoint commands

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: it8712f_wdt: add note to Kconfig
  watchdog: gef_wdt: include fs.h
  watchdog: bcm63xx_wdt: improve platform part.
  watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg PCH

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB: Fix information leak in marshalling code
  IB/pack: Remove some unused code added by the IBoE patches
  IB/mlx4: Fix IBoE link state
  IB/mlx4: Fix IBoE reported link rate
  mlx4_core: Workaround firmware bug in query dev cap
  IB/mlx4: Fix memory ordering of VLAN insertion control bits
  MAINTAINERS: Update NetEffect entry

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: only run xfs_error_test if error injection is active
  xfs: avoid moving stale inodes in the AIL
  xfs: delayed alloc blocks beyond EOF are valid after writeback
  xfs: push stale, pinned buffers on trylock failures
  xfs: fix failed write truncation handling.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: fix kernel-doc for set_consumer_device_supply
  regulator: enable supply regulator only when use count is zero
  regulator: twl-regulator - fix twlreg_set_mode
  regulator: lock supply in regulator enable
  regulator: Return proper error for regulator_register()
  regulator: Ensure enough delay time for enabling regulator
  regulator: Remove a redundant device_remove_file call in create_regulator
  regulator: Staticise mc13783_powermisc_rmw()
  regulator: regulator disable supply fix

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functions
  [media] v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev* (2)

* 'rbd-sysfs' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: replace the rbd sysfs interface

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix parsing of hostname in dfs referrals
  cifs: display fsc in /proc/mounts
  cifs: enable fscache iff fsc mount option is used explicitly
  cifs: allow fsc mount option only if CONFIG_CIFS_FSCACHE is set
  cifs: Handle extended attribute name cifs_acl to generate cifs acl blob (try #4)
  cifs: Misc. cleanup in cifsacl handling [try #4]
  cifs: trivial comment fix for cifs_invalidate_mapping
  [CIFS] fs/cifs/Kconfig: CIFS depends on CRYPTO_HMAC
  cifs: don't take extra tlink reference in initiate_cifs_search
  cifs: Percolate error up to the caller during get/set acls [try #4]
  cifs: fix another memleak, in cifs_root_iget
  cifs: fix potential use-after-free in cifs_oplock_break_put

On some motherboards the it8712f watchdog does not work unless
the game port was enabled. see Bug 13140. We therefor add a note
to Kconfig.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Add missing include "linux/fs.h".
This fixes compile failure.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

* fix devinit and devexit sections
* fix platform removal code so that the iounmap happens after the removal of the timer.
* changes the reboot_notifier by a platform shutdown method.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This patch adds an additional LPC Controller DeviceID for the Intel Patsburg PCH for TCO Watchdog.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

As the tracepoint is now decoupled from when the actual register is
assigned and was never complemented by detailing when the object lost
its fence, it has outlived its limited usefulness. Profiling the actual
stalls is a far more profitable venture anyway.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

As the userspace mappings are torn down on every GPU write, we prefer to
track when the buffer is activated (via a fresh i915_gem_fault). This
makes the LRU conceptually simpler. With coherent mappings, the
remaining use-case for set_domain_ioctl is GPU synchronisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

With this change, every batchbuffer can use all available fences (save
pinned and scanout, of course) without ever stalling the gpu!

In theory. Currently the actual pipelined update of the register is
disabled due to some stability issues. However, just the deferred update
is a significant win.

Based on a series of patches by Daniel Vetter.

The premise is that before every access to a buffer through the GTT we
have to declare whether we need a register or not. If the access is by
the GPU, a pipelined update to the register is made via the ringbuffer,
and we track the last seqno of the batches that access it. If by the
CPU we wait for the last GPU access and update the register (either
to clear or to set it for the current buffer).

One advantage of being able to pipeline changes is that we can defer the
actual updating of the fence register until we first need to access the
object through the GTT, i.e. we can eliminate the stall on set_tiling.
This is important as the userspace bo cache does not track the tiling
status of active buffers which generate frequent stalls on gen3 when
enabling tiling for an already bound buffer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>