- 25 Oct, 2010 1 commit
-
-
Dave Airlie authored
* 'intel/drm-intel-next' of ../drm-next: (63 commits) drm/i915: Move gpu_write_list to per-ring drm/i915: Invalidate the to-ring, flush the old-ring when updating domains drm/i915/ringbuffer: Write the value passed in to the tail register agp/intel: Restore valid PTE bit for Sandybridge after bdd30729 drm/i915: Fix flushing regression from 9af90d19 drm/i915/sdvo: Remove unused encoding member i915: enable AVI infoframe for intel_hdmi.c [v4] drm/i915: Fix current fb blocking for page flip drm/i915: IS_IRONLAKE is synonymous with gen == 5 drm/i915: Enable SandyBridge blitter ring drm/i915/ringbuffer: Remove broken intel_fill_struct() drm/i915/ringbuffer: Fix emit batch buffer regression from 8187a2b7 drm/i915: Copy the updated reloc->presumed_offset back to the user drm/i915: Track objects in global active list (as well as per-ring) drm/i915: Simplify most HAS_BSD() checks drm/i915: cache the last object lookup during pin_and_relocate() drm/i915: Do interrupible mutex lock first to avoid locking for unreference drivers: gpu: drm: i915: Fix a typo. agp/intel: Also add B43.1 to list of supported devices drm/i915: rearrange mutex acquisition for pread ...
-
- 24 Oct, 2010 1 commit
-
-
Chris Wilson authored
... to prevent flush processing of an idle (or even absent) ring. This fixes a regression during suspend from 87acb0a5. Reported-and-tested-by:
Alexey Fisher <bug-track@fisher-privat.net> Tested-by:
Peter Clifton <pcjc2@cam.ac.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk>
-
- 23 Oct, 2010 1 commit
-
-
Chris Wilson authored
When the object has been written to by the gpu it remains on the ring until its flush has been retired. However, when the object is moving to the ring and the associated cache needs to be invalidated, we need to perform the flush on the target ring, not the one it came from (which is NULL in the reported case and so the flush was entirely absent). Reported-by:
-
- 22 Oct, 2010 5 commits
-
-
Chris Wilson authored
This should fix the error along the reset path were we tried to clear the tail register by setting it to 0, but were in fact setting it to the current value and complaining when it did not reset to 0. Signed-off-by: -
Chris Wilson authored
In cleaning up the mask functions in bdd30729, the setting of the PTE valid bit was dropped for Sandybridge. Signed-off-by:
-
Chris Wilson authored
Whilst moving the code around in 9af90d19, I dropped the or'ing in of new write domains which would zero out the write domain for a render target if later reused as a source later in the batch. This meant that we might drop a required flush before reading from the render target. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31043 Reported-by: xunx.fang@intel.com Signed-off-by:
-
Chris Wilson authored
This block is only used when detecting whether the connector is HDMI and never again, so scope the variable to the detection routine. Signed-off-by: -
David Härdeman authored
This patch enables the sending of AVI infoframes in drivers/gpu/drm/i915/intel_hdmi.c. My receiver currently loses sync when the HDMI output on my computer (DG45FC motherboard) is switched from 800x600 (the BIOS resolution) to 1920x1080 as part of the boot. Fixable by switching inputs on the receiver a couple of times. With this patch, my receiver has not lost sync yet (> 40 tries). Fourth version, now based on drm-intel-next from: git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git Two questions still remain: I'm assuming that the sdvo hardware also stores a header ECC byte in the MSB of the first dword - is this correct? Does the SDVOB and SDVOC handling in intel_hdmi_set_avi_infoframe() look correct? Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
- 21 Oct, 2010 7 commits
-
-
Chia-I Wu authored
Block execbuffer for the fb to be flipped away, not the one that is to be flipped in. [ickle: rewritten for -next] Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Acked-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by:
Kristian Høgsberg <krh@bitplanet.net> Signed-off-by:
-
Chris Wilson authored
So remove the redundant bit in the capabilities block and s/IS_IRONLAKE/IS_GEN5/. Signed-off-by: -
Chris Wilson authored
Based on an original patch by Zhenyu Wang, this initializes the BLT ring for SandyBridge and enables support for user execbuffers. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: -
Chris Wilson authored
... before someone tries to use it. The code both calls intel_ring_begin/advance() and open-codes the bookkeeping performed by those two functions. Signed-off-by: -
Chris Wilson authored
In commit 8187a2b7, the number of dwords used in the ringbuffer for executing the batch buffer was erroneously changed from 2 to 4. Signed-off-by:
-
Thomas Hellstrom authored
This commit replaces the ttm_bo_cleanup_ref function with two new functions. One for the case where the bo is not yet on the delayed destroy list, and one for the case where the bo was on the delayed destroy list, at least at the time of call. This makes it possible to optimize the two cases somewhat. It also enables the possibility to directly destroy buffers on the delayed delete list when they are about to be evicted or swapped out. Currently they were only evicted / swapped and destruction was left for the delayed buffer destruction thread. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
Release the lru spinlock early. Signed-off-by:
-
- 20 Oct, 2010 4 commits
-
-
Chris Wilson authored
If the userspace driver is using a constant relocation array with a static buffer, they will pass the same relocation array back to the kernel. So we *do* need to update the presumed offset value in those relocations to reflect the current object so that they remain correct with future batchbuffers and we avoid the necessity of having to suspend execution and perform redundant relocations. Fixes the regression introduced by 12f889c for applications using absolute addressing on trees of buffer (i.e. the current consumers of libdrm_intel.so). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30996Reported-by:
Wang, Jinjin <jinjin.wang@intel.com> Signed-off-by:
-
Chris Wilson authored
To handle retirements, we need per-ring tracking of active objects. To handle evictions, we need global tracking of active objects. As we enable more rings, rebuilding the global list from the individual per-ring lists quickly grows tiresome and overly complicated. Tracking the active objects in two lists is the lesser of two evils. Signed-off-by: -
Chris Wilson authored
... by always initialising the empty ringbuffer it is always then safe to check whether it is active. Signed-off-by: -
Chris Wilson authored
The most frequent relocation within a batchbuffer is a contiguous sequence of vertex buffer relocations, for which we can virtually eliminate the drm_gem_object_lookup() overhead by caching the last handle to object translation. In doing so we refactor the pin and relocate retry loop out of do_execbuffer into its own helper function and so improve the error paths. Signed-off-by:
-
- 19 Oct, 2010 21 commits
-
-
Chris Wilson authored
One of the primarily consumers of the i915 driver is X, a large signal driven application. Frequently when writing into the buffers, there is a pending signal which causes us not to take the interruptible lock but then we need to take that same lock around the object unreference. By rearranging the code to do the interruptible lock as the first check, we can avoid the frequent additional locking around the unreference. Signed-off-by: -
Andrea Gelmini authored
"userpace" -> "userspace" Signed-off-by:
Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by:
-
Chris Wilson authored
This was a missing piece from 41a51428 that dropped recognition of the AGP module for the second B43 variant. Reported-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Chris Wilson authored
... to avoid the double acquisition along fast[er] paths. Signed-off-by: -
Chris Wilson authored
... to avoid reacquiring it to drop the object reference count on exit. Note we have to make sure we now drop (and reacquire) the lock around acquiring the mm semaphore on the slow paths. Signed-off-by: -
Chris Wilson authored
... in the hope that it makes the atomic fast paths more likely. Signed-off-by: -
Chris Wilson authored
After allocation a handle for the fresh object, we know that we can safely drop the refcnt without triggering a free so we do not need the mutex. Strangely, this mutex acquisition is the one that appears on driver profiles. Signed-off-by: -
Chris Wilson authored
Avoid an early eviction of the batch buffer into the uncached GTT domain, and so do the relocation fixup in cacheable memory. Signed-off-by: -
Chris Wilson authored
... perform an access validation check up front instead and copy them in on-demand, during i915_gem_object_pin_and_relocate(). As around 20% of the CPU overhead may be spent inside vmalloc for the relocation entries when submitting an execbuffer [for x11perf -aa10text], the savings are considerable and result in around a 10% throughput increase [for glyphs]. Signed-off-by: -
Chris Wilson authored
Allow the user to override the detection of the sink's audio capabilities from EDID. Not all sinks support the required EDID level to specify whether they handle audio over the display connection, so allow the user to enable it manually. Signed-off-by: -
Chris Wilson authored
Allow the user to override the detection of the sink's audio capabilities from EDID. Not all sinks support the required EDID level to specify whether they handle audio over the display connection, so allow the user to enable it manually. Signed-off-by: -
Chris Wilson authored
Allow the user to override the detection of the sink's audio capabilities from EDID. Not all sinks support the required EDID level to specify whether they handle audio over the display connection, so allow the user to enable it manually. Signed-off-by: -
Zhenyu Wang authored
Rely on monitor's audio capability to turn on audio output for HDMI. Tested-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Zhenyu Wang authored
This will turn on DP audio output by checking monitor's audio capability. Signed-off-by:
-
Zhenyu Wang authored
To help to determine if digital display port needs to enable audio output or not. This one adds a helper to get monitor's audio capability via EDID CEA extension block. Tested-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
-
Bryan Freed authored
The time between start of the pixel clock and backlight enable is a basic panel timing constraint. If the Panel Power On/Off registers are found to be 0, assume we are booting without VBIOS initialization and set these registers to something reasonable. Change-Id: Ibed6cc10d46bf52fd92e0beb25ae3525b5eef99d Signed-off-by:
Bryan Freed <bfreed@chromium.org> [ickle: rearranged into a separate function to distinguish its role from simply parsing the VBIOS tables.] Signed-off-by:
-
Chris Wilson authored
If userspace is submitting so many long running batches that the ring becomes full, throttle by sleeping for a 1ms before checking for free space. Simply yielding was causing excessive scheduler overhead whilst making no progress. Signed-off-by: -
Zhenyu Wang authored
In i2c GPIO fallback, index 6 is reserved for nothing. Signed-off-by:
-
Chris Wilson authored
FDI_PLL_BIOS_0 register is for Ironlake only, don't apply to Sandybridge. Original-patch-by:
-
Jesse Barnes authored
Since the PLL may still be on, and the training pattern may not be correct. Fixes suspend/resume on my PCH eDP test system. Signed-off-by:
-
Daniel Vetter authored
Freeing the Hardware Status Page was writing to the HWS register in order to disable the GPU writing to the HWS page. Unfortunately, we were writing to the mmio register after unmapping the register space, hence the oops. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
