- 03 Oct, 2006 40 commits
-
-
Ishai Rabinovitz authored
While reading the code I found a bug in the error path in alloc_dev in dm.c When blk_alloc_queue fails there is no call to free_minor. This patch fixes the problem. Signed-off-by:
Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Milan Broz authored
The new ioctl code passes the wrong file pointer to the underlying device. No file pointer is available so make a temporary fake one. ioctl_by_bdev() does set_fs(KERNEL_DS) so it's for ioctls originating within the kernel and unsuitable here. We are processing ioctls that originated in userspace and mapping them to different devices. Fixing the existing callers that pass a NULL file struct and consolidating the fake_file users are separate matters to solve in later patches. Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Alasdair G Kergon authored
Export blkdev_driver_ioctl for device-mapper. If we get as far as the device-mapper ioctl handler, we know the ioctl is not a standard block layer BLK* one, so we don't need to check for them a second time and can call blkdev_driver_ioctl() directly. Signed-off-by:
-
Milan Broz authored
When an ioctl is performed on a multipath device simply pass it on to the underlying block device through current_path. If current path is not yet selected, select it. Signed-off-by:
-
Milan Broz authored
When an ioctl is performed on a device with a linear target, simply pass it on to the underlying block device. Note that the ioctl will pass through the filtering in blkdev_ioctl() twice. Signed-off-by:
-
Milan Broz authored
Extend the core device-mapper infrastructure to accept arbitrary ioctls on a mapped device provided that it has exactly one target and it is capable of supporting ioctls. [We can't use unlocked_ioctl because we need 'inode': 'file' might be NULL. Is it worth changing this?] Signed-off-by:
-
Paul Mackerras authored
xmon writes garbage on the screen because the nvidia console driver has changed the line pitch from what the firmware set it to. Fix it by making the nvidia driver inform the btext engine (which xmon uses if the screen is its output device) about changes to display resolution. Signed-off-by:
Paul Mackerras <paulus@samba.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Geert Uytterhoeven authored
Address http://bugzilla.kernel.org/show_bug.cgi?id=7189 It should check `clen', not `len'. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: <jurij@wooyd.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: <stable@kernel.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Carl-Daniel Hailfinger authored
This patch adds suspend/resume support for the graphics chip in the Acer Aspire 2010: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 01:00.0 0300: 1002:4e50 (prog-if 00 [VGA]) Subsystem: 1025:0061 Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 16 Memory at a8000000 (32-bit, prefetchable) [size=128M] I/O ports at c100 [size=256] Memory at e0010000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at a0000000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Capabilities: [50] Power Management version 2 Signed-off-by:Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@mgx.net> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Benjamin A. Okopnik" <ben@linuxgazette.net> Signed-off-by:
-
Reiner Herrmann authored
Signed-off-by:
Reiner Herrmann <reiner@reiner-h.de> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Alan Cox authored
- Remove 24/32bit unused support (the chips don't do 24/32bit anyway) - Clean up printk obfuscation - Clean up lispitus in the if(())()) stuff - Minor tidying No functionality changes, may have a crack at hardware scrolling based on my X driver once the cleanups are in. Signed-off-by:
Alan Cox <alan@redhat.com> Cc: Antonino A. Daplas <adaplas@gmail.com> Signed-off-by:
-
Adrian Bunk authored
This patch adds proper prototypes to header files for three console init functions used on drivers/char/vt.c Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Adrian Bunk authored
This patch makes three needlessly global functions static. Signed-off-by:
-
Raphael Assenat authored
This patch fixes a bug where we obtain a smaller resolution than requested. (eg: in 640x480, only 639x479 usable pixels). This was due to 1 being substracted from the xres and yres vars two times: first in mbxfb.c and then in the macros from reg_bits.h. This patch removes the minus ones from the mbxfb.c file. Tested and works. Signed-off-by:
Raphael Assenat <raph@8d.com> Signed-off-by:
-
Raphael Assenat authored
This is a workaround for what I think is a bug in the 2700G chip. The PLL output frequency is adustable using 3 values (M, N and P. See code for formula). The N value range is documented to be 1 to 7 but when it is set to 1, the output frequency is lower than it should be (divided by 2), giving unexpected results such as no sync on a CRT display. This patch prevents N=1 when searching for the best value for the requested pixclock. Signed-off-by:
-
Adrian Bunk authored
- make the following needlessly global function static: - mach64_ct.c: aty_st_pll_ct() - proper prototypes for the following functions: - atyfb_base.c: atyfb_copyarea() - atyfb_base.c: atyfb_fillrect() - atyfb_base.c: atyfb_imageblit() Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Michal Piotrowski authored
Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of pci_enable_device(). Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of pci_enable_device(). Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of pci_register_driver() Signed-off-by:
-
Antonino A. Daplas authored
Check return value of pci_register_driver(). Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by:
-
Antonino A. Daplas authored
Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by:
-
Antonino A. Daplas authored
Remove the cursor timer (cursor flashing) on the following conditions: - if vc is in KD_GRAPHICS mode, ie, when X owns the console - if vc is blanked This misbehavior was exposed by Dave Jones. Signed-off-by:
-
Dave Jones authored
Every time the console cursor blinks, we do a kmalloc/kfree pair. This patch turns that into a single allocation. This allocation was the most frequent kmalloc I saw on my test box. [adaplas] Per Alan's suggestion, move global variables to fbcon's private structure. This would also avoid resource leaks when fbcon is unloaded. Signed-off-by:
Dave Jones <davej@redhat.com> Acked-by:
-
Dennis Munsie authored
Uses the generic ddc read functionality in fbmon.c instead of the previous functionality. Signed-off-by:
Dennis Munsie <dmunsie@cecropia.com> Signed-off-by:
-
Antonino A. Daplas authored
Update driver to use generic DDC reading [khali@linux-fr.org: fix oops in i2c handling] Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Jurriaan <thunder7@xs4all.nl> Signed-off-by:
-
Antonino A. Daplas authored
Update driver to use generic DDC reading Signed-off-by:
-
Antonino A. Daplas authored
Update driver to use generic DDC reading Signed-off-by:
-
Antonino A. Daplas authored
Update driver to use generic DDC reading Signed-off-by:
-
Dennis Munsie authored
Adds functionality to read the EDID information over the DDC bus in a generic way. This code is based on the DDC implementation in the radeon driver. [adaplas] - separate from fbmon.c and place in new file fb_ddc.c - remove dependency to CONFIG_I2C and CONFIG_I2C_ALGOBIT, otherwise, feature will not compile if i2c support is compiled as a module - feature is selectable only by drivers needing it. It must have a 'select FB_DDC if xxx' in Kconfig - change printk's to dev_*, the i2c people prefers it Signed-off-by:
-
