1. 06 Aug, 2013 9 commits
  2. 05 Aug, 2013 3 commits
    • Florian Fainelli's avatar
      MIPS: BMIPS: fix hardware interrupt routing for boot CPU != 0 · fcfa66de
      Florian Fainelli authored
      The hardware interrupt routing for boot CPU != 0 is wrong because it
      will route all the hardware interrupts to TP0 which is not the one we
      booted from. Fix this by properly checking which boot CPU we are booting
      from and updating the right interrupt mask for the boot CPU. This fixes
      booting on BCM3368 with bmips_smp_emabled = 0.
      Signed-off-by: default avatarFlorian Fainelli <florian@openwrt.org>
      Cc: linux-mips@linux-mips.org
      Cc: blogic@openwrt.org
      Cc: jogo@openwrt.org
      Cc: cernekee@gmail.com
      Patchwork: https://patchwork.linux-mips.org/patch/5650/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      fcfa66de
    • Ralf Baechle's avatar
      MIPS: oprofile: Fix BUG due to smp_processor_id() in preemptible code. · cf5b2d23
      Ralf Baechle authored
      current_cpu_type() is not preemption-safe.
      If CONFIG_PREEMPT is enabled then mipsxx_reg_setup() can be called from preemptible state.
      Added get_cpu()/put_cpu() pair to make it preemption-safe.
      
      This was found while testing oprofile with CONFIG_DEBUG_PREEMPT enable.
      
      /usr/zntestsuite # opcontrol --init
      /usr/zntestsuite # opcontrol --setup --event=L2_CACHE_ACCESSES:500 --event=L2_CACHE_MISSES:500 --no-vmlinux
      /usr/zntestsuite # opcontrol --start
      Using 2.6+ OProfile kernel interface.
      BUG: using smp_processor_id() in preemptible [00000000] code: oprofiled/1362
      caller is mipsxx_reg_setup+0x11c/0x164
      CPU: 0 PID: 1362 Comm: oprofiled Not tainted 3.10.4 #18
      Stack : 00000006 70757465 00000000 00000000 00000000 00000000 80b173f6 00000037
                80b10000 00000000 80b21614 88f5a220 00000000 00000000 00000000 00000000
                00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
                00000000 00000000 00000000 89c49c00 89c49c2c 80721254 807b7927 8012c1d0
                80b10000 80721254 00000000 00000552 88f5a220 80b1335c 807b78e6 89c49ba8
                ...
      Call Trace:
      [<801099a4>] show_stack+0x64/0x7c
      [<80665520>] dump_stack+0x20/0x2c
      [<803a2250>] debug_smp_processor_id+0xe0/0xf0
      [<8052df24>] mipsxx_reg_setup+0x11c/0x164
      [<8052cd70>] op_mips_setup+0x24/0x4c
      [<80529cfc>] oprofile_setup+0x5c/0x12c
      [<8052b9f8>] event_buffer_open+0x78/0xf8
      [<801c3150>] do_dentry_open.isra.15+0x2b8/0x3b0
      [<801c3270>] finish_open+0x28/0x4c
      [<801d49b8>] do_last.isra.41+0x2cc/0xd00
      [<801d54a0>] path_openat+0xb4/0x4c4
      [<801d5c44>] do_filp_open+0x3c/0xac
      [<801c4744>] do_sys_open+0x110/0x1f4
      [<8010f47c>] stack_done+0x20/0x44
      
      Bug reported and original patch by Jerin Jacob <jerinjacobk@gmail.com>.
      Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      Acked-by: default avatarJerin Jacob <jerinjacobk@gmail.com>
      cf5b2d23
    • Markos Chandras's avatar
      MIPS: PNX833x: PNX8335_PCI_ETHERNET_INT depends on CONFIG_SOC_PNX8335 · 3ac3bcb9
      Markos Chandras authored
      The PNX8335_PCI_ETHERNET_INT macro is defined in
      arch/mips/include/asm/mach-pnx833x/irq-mapping.h
      only if CONFIG_SOC_PNX8335 is selected.
      
      Fixes the following randconfig problem:
      arch/mips/pnx833x/common/platform.c:210:12:
      error: 'PNX8335_PIC_ETHERNET_INT' undeclared here
      (not in a function)
      Signed-off-by: default avatarMarkos Chandras <markos.chandras@imgtec.com>
      Acked-by: default avatarSteven J. Hill <Steven.Hill@imgtec.com>
      Cc: linux-mips@linux-mips.org
      Patchwork: https://patchwork.linux-mips.org/patch/5585/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
      3ac3bcb9
  3. 04 Aug, 2013 6 commits
  4. 03 Aug, 2013 17 commits
  5. 02 Aug, 2013 5 commits
    • Paul Moore's avatar
      netlabel: use domain based selectors when address based selectors are not available · 6a8b7f0c
      Paul Moore authored
      NetLabel has the ability to selectively assign network security labels
      to outbound traffic based on either the LSM's "domain" (different for
      each LSM), the network destination, or a combination of both.  Depending
      on the type of traffic, local or forwarded, and the type of traffic
      selector, domain or address based, different hooks are used to label the
      traffic; the goal being minimal overhead.
      
      Unfortunately, there is a bug such that a system using NetLabel domain
      based traffic selectors does not correctly label outbound local traffic
      that is not assigned to a socket.  The issue is that in these cases
      the associated NetLabel hook only looks at the address based selectors
      and not the domain based selectors.  This patch corrects this by
      checking both the domain and address based selectors so that the correct
      labeling is applied, regardless of the configuration type.
      
      In order to acomplish this fix, this patch also simplifies some of the
      NetLabel domainhash structures to use a more common outbound traffic
      mapping type: struct netlbl_dommap_def.  This simplifies some of the code
      in this patch and paves the way for further simplifications in the
      future.
      Signed-off-by: default avatarPaul Moore <pmoore@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6a8b7f0c
    • Roman Gushchin's avatar
      net: check net.core.somaxconn sysctl values · 5f671d6b
      Roman Gushchin authored
      It's possible to assign an invalid value to the net.core.somaxconn
      sysctl variable, because there is no checks at all.
      
      The sk_max_ack_backlog field of the sock structure is defined as
      unsigned short. Therefore, the backlog argument in inet_listen()
      shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall
      is truncated to the somaxconn value. So, the somaxconn value shouldn't
      exceed 65535 (USHRT_MAX).
      Also, negative values of somaxconn are meaningless.
      
      before:
      $ sysctl -w net.core.somaxconn=256
      net.core.somaxconn = 256
      $ sysctl -w net.core.somaxconn=65536
      net.core.somaxconn = 65536
      $ sysctl -w net.core.somaxconn=-100
      net.core.somaxconn = -100
      
      after:
      $ sysctl -w net.core.somaxconn=256
      net.core.somaxconn = 256
      $ sysctl -w net.core.somaxconn=65536
      error: "Invalid argument" setting key "net.core.somaxconn"
      $ sysctl -w net.core.somaxconn=-100
      error: "Invalid argument" setting key "net.core.somaxconn"
      
      Based on a prior patch from Changli Gao.
      Signed-off-by: default avatarRoman Gushchin <klamm@yandex-team.ru>
      Reported-by: default avatarChangli Gao <xiaosuo@gmail.com>
      Suggested-by: default avatarEric Dumazet <edumazet@google.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5f671d6b
    • Denis Kirjanov's avatar
      sis900: Fix the tx queue timeout issue · 3508ea33
      Denis Kirjanov authored
      [  198.720048] ------------[ cut here ]------------
      [  198.720108] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:255 dev_watchdog+0x229/0x240()
      [  198.720118] NETDEV WATCHDOG: eth0 (sis900): transmit queue 0 timed out
      [  198.720125] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 mii
      [  198.720159] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc3+ #12
      [  198.720167] Hardware name: System Manufacturer System Name/TUSI-M, BIOS ASUS TUSI-M ACPI BIOS
      Revision 1013 Beta 001 12/14/2001
      [  198.720175]  000000ff c13fa6b9 c169ddcc c12208d6 c169ddf8 c1031e4d c1664a84 c169de24
      [  198.720197]  00000000 c165f5ea 000000ff c13fa6b9 00000001 000000ff c1664a84 c169de10
      [  198.720217]  c1031f13 00000009 c169de08 c1664a84 c169de24 c169de50 c13fa6b9 c165f5ea
      [  198.720240] Call Trace:
      [  198.720257]  [<c13fa6b9>] ? dev_watchdog+0x229/0x240
      [  198.720274]  [<c12208d6>] dump_stack+0x16/0x20
      [  198.720306]  [<c1031e4d>] warn_slowpath_common+0x7d/0xa0
      [  198.720318]  [<c13fa6b9>] ? dev_watchdog+0x229/0x240
      [  198.720330]  [<c1031f13>] warn_slowpath_fmt+0x33/0x40
      [  198.720342]  [<c13fa6b9>] dev_watchdog+0x229/0x240
      [  198.720357]  [<c103f158>] call_timer_fn+0x78/0x150
      [  198.720369]  [<c103f0e0>] ? internal_add_timer+0x40/0x40
      [  198.720381]  [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0
      [  198.720392]  [<c103f33f>] run_timer_softirq+0x10f/0x200
      [  198.720412]  [<c103954f>] ? __do_softirq+0x6f/0x210
      [  198.720424]  [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0
      [  198.720435]  [<c1039598>] __do_softirq+0xb8/0x210
      [  198.720467]  [<c14b54d2>] ? _raw_spin_unlock+0x22/0x30
      [  198.720484]  [<c1003245>] ? handle_irq+0x25/0xd0
      [  198.720496]  [<c1039c0c>] irq_exit+0x9c/0xb0
      [  198.720508]  [<c14bc9d7>] do_IRQ+0x47/0x94
      [  198.720534]  [<c1056078>] ? hrtimer_start+0x28/0x30
      [  198.720564]  [<c14bc8b1>] common_interrupt+0x31/0x38
      [  198.720589]  [<c1008692>] ? default_idle+0x22/0xa0
      [  198.720600]  [<c10083c7>] arch_cpu_idle+0x17/0x30
      [  198.720631]  [<c106d23d>] cpu_startup_entry+0xcd/0x180
      [  198.720643]  [<c14ae30a>] rest_init+0xaa/0xb0
      [  198.720654]  [<c14ae260>] ? reciprocal_value+0x50/0x50
      [  198.720668]  [<c17044e0>] ? repair_env_string+0x60/0x60
      [  198.720679]  [<c1704bda>] start_kernel+0x29a/0x350
      [  198.720690]  [<c17044e0>] ? repair_env_string+0x60/0x60
      [  198.720721]  [<c1704269>] i386_start_kernel+0x39/0xa0
      [  198.720729] ---[ end trace 81e0a6266f5c73a8 ]---
      [  198.720740] eth0: Transmit timeout, status 00000204 00000000
      
      timer routine checks the link status and if it's up calls
      netif_carrier_on() allowing upper layer to start the tx queue
      even if the auto-negotiation process is not finished.
      
      Also remove ugly auto-negotiation check from the sis900_start_xmit()
      
      CC: Duan Fugang <B38611@freescale.com>
      CC: Ben Hutchings <bhutchings@solarflare.com>
      Signed-off-by: default avatarDenis Kirjanov <kda@linux-powerpc.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3508ea33
    • Linus Torvalds's avatar
      Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband · abe03080
      Linus Torvalds authored
      Pull infiniband/rdma fixes from Roland Dreier:
       - Fixes for the newly merged mlx5 hardware driver
       - Stack info leak fixes from Dan Carpenter
       - Fixes for pkey table handling with SR-IOV
       - A few other small things
      
      * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
        IPoIB: Fix pkey change flow for virtualization environments
        IPoIB: Make sure child devices use valid/proper pkeys
        IB/core: Create QP1 using the pkey index which contains the default pkey
        mlx5_core: Variable may be used uninitialized
        mlx5_core: Implement new initialization sequence
        mlx5_core: Fix use after free in mlx5_cmd_comp_handler()
        IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext()
        IB/mlx5: Fix error return code in init_one()
        IB/mlx4: Use default pkey when creating tunnel QPs
        RDMA/cma: Only call cma_save_ib_info() for CM REQs
        RDMA/cma: Fix accessing invalid private data for UD
        RDMA/cma: Fix gcc warning
        Revert "RDMA/nes: Fix compilation error when nes_debug is enabled"
        IB/qib: Add err_decode() call for ring dump
        RDMA/cxgb3: Fix stack info leak in iwch_create_cq()
        RDMA/nes: Fix info leaks in nes_create_qp() and nes_create_cq()
        RDMA/ocrdma: Fix several stack info leaks
        RDMA/cxgb4: Fix stack info leak in c4iw_create_qp()
        RDMA/ocrdma: Remove unused include
      abe03080
    • Linus Torvalds's avatar
      Merge tag 'gpio-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · 1cb39a6c
      Linus Torvalds authored
      Pull GPIO fixes from Linus Walleij:
       "Yet another GPIO pull request, fixing the fix from the last one.  It
        turns out that fixing the boot path for device tree boots on OMAP
        breaks out antique systems (such as OMAP1) and we need to find a
        better way.  So we're reverting that "fix" for the moment and thinking
        about something better.
      
        Also fixing a build issue on the MSM driver"
      
      * tag 'gpio-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        gpio_msm: Fix build error due to missing err.h
        Revert "gpio/omap: don't create an IRQ mapping for every GPIO on DT"
        Revert "gpio/omap: auto request GPIO as input if used as IRQ via DT"
        Revert "gpio/omap: fix build error when OF_GPIO is not defined."
      1cb39a6c