Check if a client passes a NULL callback into an SA query, and if so, never
call back.  This fixes an oops if someone unloads ib_ipoib and ib_sa in
rapid succession.  ib_ipoib does an MCMember delete with a NULL callback
and 0 timeout on unload, which is usually fine since the delete completes
successfully.  However, if ib_sa is unloaded immediately afterwards, the
delete will be canceled and ib_sa will try to call the (now already
unloaded) ib_ipoib module back with the cancel completion, which triggers
the oops.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixes some !CONFIG_BUG warnings:
include/asm/mmu_context.h: I funktion `switch_mm':
include/asm/mmu_context.h:57: varning: implicit declaration of function `out_of_line_bug'
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It looks like the recent IPMI patches had some -mm-onlyisms.
Signed-off-by: Neil Horman <nhorman@redhat.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Don't try to access the i2c bus if the register wasn't successful.
Signed-off-by: Gerd Knorr <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

	rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

This has been sitting for a while, and is causing lots of grief for
people burning CDs.  It relaxes the dma restriction for ide-cd,
requiring only the length to be 32-byte aligned, address should be fine
at normal double word alignment.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There's a bigger Speedtouch update coming your way after 2.6.12 but in
the meantime, let's at least make it automatically resync if the DSL
signal is lost.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

For quite a while, there has existed a hypervisor bug on legacy iSeries
which means that we do not get the boot time set in the kernel.  This
patch works around that bug.  This was most noticable when the root
partition needed to be checked at every boot as the kernel thought it
was some time in 1905 until user mode reset the time correctly.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On PPC64, we keep track of when we need to update jiffies (and the
variables used to calculate the time of day) based on the time base.

If the time base frequence is sufficiently high compared to the
processor clock frequency, then it is possible for the time of day
variables to be corrupted at the time of the first decrementer interrupt
we take.  This became obvious on a legacy iSeries where the time base
frequency is the same as the processor clock.

This one line patch fixes the initialisation so that the time of day
variables and the indicator we use to tell when updates are due are
better synchronised.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix a c99ism.

Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

For older gcc's.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

try_to_unmap_cluster() does:
        for (pte = pte_offset_map(pmd, address);
                        address < end; pte++, address += PAGE_SIZE) {
		...
	}

	pte_unmap(pte);

It may take a little staring to notice, but pte can actually fall off the
end of the pte page in this iteration, which makes life difficult for
kmap_atomic() and the users not expecting it to BUG().  Of course, we're
somewhat lucky in that arithmetic elsewhere in the function guarantees that
at least one iteration is made, lest this force larger rearrangements to be
made.  This issue and patch also apply to non-mm mainline and with trivial
adjustments, at least two related kernels.

Discovered during internal testing at Oracle.
Signed-off-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If SIGKILL does not have priority, we cannot instantly kill task before it
makes some unexpected job.  It can be critical, but we were unable to
reproduce this easily until Heiko Carstens <Heiko.Carstens@de.ibm.com>
reported this problem on LKML.
Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-Off-By: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes a compile bug by moving a static inline function to the
right place.  The body of a static inline function has to be declared
before the use of this function.
Signed-off-by: Dominik Hackl <dominik@hackl.dhs.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Use LIST_HEAD_INIT rather than doing it by hand in DEFINE_WAIT.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The 'if' clause for ULI526X in tulip_mdio_write allows for
spin_unlock_irqrestore to be called twice for tp->mii_lock.  I believe
this is caused by the unintentional omission of a return at the end
of that clause.  This patch adds that return.
Signed-off-by: John W. Linville <linville@tuxdriver.com>

As a result of the split of the kobject-registration and the
corresponding hotplug event, the order of events for device_add() has
changed. This restores the old order, cause it confused some userspace
applications.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

This makes the DMA bug workaround test more likely
to find the problem on some systems.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Everybody does

	struct packet_type foo_packet_type = {
		.type = __constant_htons(ETH_P_FOO);
	};

5 introduced warnings will be properly fixed later.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add 0x1601 as 5752M, it's a 5752 but for mobile PCs.
Stolen from Broadcom bcm5700-8.1.55 driver.

Someone forgot to add it to tg3 ;-)
Signed-off-by: David S. Miller <davem@davemloft.net>

I removed the ethernet definitions (which were commented out) and
cleaned up the tabs.
Signed-off-by: Jon Mason <jdmason@us.ibm.com>

That struct member was deleted, but a comment
was not updated to reflect this.
Signed-off-by: David S. Miller <davem@davemloft.net>

The netlink gfp_any() problem made me double-check the uses of in_softirq()
in crypto/*.  It seems to me that we should be checking in_atomic() instead
of in_softirq() in crypto_yield.  Otherwise people calling the crypto ops
with spin locks held or preemption disabled will get burnt, right?
Signed-off-by: David S. Miller <davem@davemloft.net>

When we are doing ucopy, we try to defer the ACK generation to
cleanup_rbuf().  This works most of the time very well, but if the
ucopy prequeue is large, this ACKing behavior kills performance.

With TSO, it is possible to fill the prequeue so large that by the
time the ACK is sent and gets back to the sender, most of the window
has emptied of data and performance suffers significantly.

This behavior does help in some cases, so we should think about
re-enabling this trick in the future, using some kind of limit in
order to avoid the bug case.
Signed-off-by: David S. Miller <davem@davemloft.net>

The hardware sync of the timebase on SMP G5s uses a black magic
incantation to the i2c clock chip that was inspired from what Darwin
does.

However, this was an earlier version of Darwin that was ...  buggy !
heh.  This causes the latest models to break though when starting SMP,
so it's worth fixing.

Here's a new version of the incantation based on careful transcription
of the said incantations as found in the latest version of apple's
temple.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There is an off-by-one error in the IPIC code that configures the
external interrupts (Edge or Level Sensitive).
Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The latest speedbumped Apple G5 models have a "bug" in the Open Firmware
device tree that lacks the proper interrupt routing information for the
northbridge i2c controller.  Apple's driver silently falls back into a
sub-optimal "polled" mode (heh, maybe they didn't even notice the bug
because of that :), our driver didn't properly check and crashes :(

This patch fixes our driver to not crash, and adds code to the
prom_init() OF trampoline code that detects the "bug" and adds the
missing information back for this chipset revision.  This fixes booting
and thermal control on these models.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I came across the following problem while running ltp-aiodio testcases from
ltp-full-20050405 on linux-2.6.12-rc3-mm3.  I tried running the tests with
EXT3 as well as JFS filesystems.

One or two fsx-linux testcases were hung after some time.  These testcases
were hanging at wait_for_all_aios().

Debugging shows that there were some iocbs which were not getting completed
eventhough the last retry for those returned -EIOCBQUEUED.  Also all such
pending iocbs represented READ operation.

Further debugging revealed that all such iocbs hit EOF in the DIO layer.
To be more precise, the "pos" from which they were trying to read was
greater than the "size" of the file.  So the generic_file_direct_IO
returned 0.

This happens rarely as there is already a check in
__generic_file_aio_read(), for whether "pos" < "size" before calling direct
IO routine.

>size = i_size_read(inode);
>if (pos < size) {
>	  retval = generic_file_direct_IO(READ, iocb,
>                               iov, pos, nr_segs);

But for READ, we are taking the inode->i_sem only in the DIO layer.  So it
is possible that some other process can change the size of the file before
we take the i_sem.  In such a case ( when "pos" > "size"), the
__generic_file_aio_read() would return -EIOCBQUEUED even though there were
no I/O requests submitted by the DIO layer.  This would cause the AIO layer
to expect aio_complete() for THE iocb, which doesnot happen.  And thus the
test hangs forever, waiting for an I/O completion, where there are no
requests submitted at all.

The following patch makes __generic_file_aio_read() return 0 (instead of
returning -EIOCBQUEUED), on getting 0 from generic_file_direct_IO(), so
that the AIO layer does the aio_complete().

Testing:

I have tested the patch on a SMP machine(with 2 Pentium 4 (HT)) running
linux-2.6.12-rc3-mm3.  I ran the ltp-aiodio testcases and none of the
fsx-linux tests hung.  Also the aio-stress tests ran without any problem.
Signed-off-by: Suzuki K P <suzuki@in.ibm.com>
Signed-off-by: Suparna Bhattacharya <suparna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes a bug introduced by Al Viro's patch: [patch 136/174]
reiserfs endianness: clone struct reiserfs_key

The problem is MAX_KEY and MAX_IN_CORE_KEY defined in this patch do not
look equal from reiserfs comp_key's point of view.  This caused reiserfs'
sanity check to complain.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>