- 09 Feb, 2009 34 commits
-
-
Danny Kukawka authored
Fixed led device naming for the iwl driver. Due to the documentation of the led subsystem/class the naming should be "devicename:colour:function" while not applying sections should be left blank. This should lead to e.g. "iwl-phy0::RX" instead of "iwl-phy0:RX". Signed-off-by:
Danny Kukawka <dkukawka@suse.de> Acked-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Jay Sternberg authored
not defining dependencies for LIBIPW caused the following entries to not be indented. changing this entry to depend on PCI && WLAN_80211 corrects this issue Signed-off-by:
Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by:
-
Jay Sternberg authored
redefine structures that contain function pointer for chain noise reset and chain noise gain for the 6000 family since these are not needed. Signed-off-by:
-
Jay Sternberg authored
defined the structures and functions as extern to alter behavior used by 5000 series for other products including 100 and 6000 series Signed-off-by:
-
Jay Sternberg authored
Correct the API commands where same command id used for two different commands. Update max api versions for affected devices. TX_ANT_CONFIGURATION_CMD was already using id 0x98, so REPLY_TX_POWER_DBM_CMD moved to 0x95 Older API interfaces may used original value so V1 defines provided. Signed-off-by:
-
Jay Sternberg authored
added a config parameter to enable setting PLL_CFG. older hardware has this parameter set true. the 6000 family does not support this setting, so this parameter set false. Signed-off-by:
-
Jay Sternberg authored
by parametrizing the set hw function, in addition to allowing for supporting the 6000 family significantly simplify the addition of new hardware. Signed-off-by:
-
Jay Sternberg authored
simply add definitions for the HW_REV_TYPEs for the new devices. Signed-off-by:
-
Alina Friedrichsen authored
I hold back this patch for around a week to avoid confusion. This is the second step of "mac80211: Fixed BSSID handling revisited". With it, in the situation of a strange merge to the same BSSID (e.g. caused by a TSF overflow) only reset_tsf() is called. And sta_info_flush_delayed() is only called if you change the network manually, not on an automatic BSSID merge. Signed-off-by:
Alina Friedrichsen <x-alina@gmx.net> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by:
-
Alina Friedrichsen authored
This fixes a bug when creating a new IBSS network with a fixed BSSID. The fixed BSSID situation is now with one of my last patches handled in ieee80211_sta_find_ibss() function. It's more robust to test against (ifsta->flags & IEEE80211_STA_PREV_BSSID_SET), because ifsta->state is not seted right in every situation and so the creating of the new IBSS network sometimes hangs after the first try to scan for a network to merge. Signed-off-by:
-
Sujith authored
RX filter masks are already defined in enum ath9k_rx_filter in ath9k.h Signed-off-by:
Sujith <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Sujith authored
Trying to associate with a non-existent SSID stops the state machine after the first run. Subsequent association requests fail to start the scan engine. Fix this by resetting assoc_scan_tries to zero after completing a scan run. Signed-off-by:
-
Luis R. Rodriguez authored
If we have new found information about our location and the current country regulatory domain does not have passive scan flag requirements we should be able to actively scan now on those channels. Since AP functionality is not allowed where passive scan flags are set this means if you have a world regulatory domain and you get a country IE that allows that channel (with active scan) then we lift the passive-scan requirement so you can then use AP mode. Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This will be used later. Signed-off-by:
-
Luis R. Rodriguez authored
No need to use our internal wireless mode variable when cfg80211 already has its own. Signed-off-by:
-
Vivek Natarajan authored
Enable operating mode specific interrupts in ath9k_add_interface instead of ath9k_start. Signed-off-by:
Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by:
-
Sujith authored
This patch fixes the lockdep warning shown below, and also initializes the starting sequence number when starting a TX aggregation session. ============================================= [ INFO: possible recursive locking detected ] 2.6.29-rc2-wl #21 --------------------------------------------- swapper/0 is trying to acquire lock: (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 but task is already holding lock: (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 other info that might help us debug this: 7 locks held by swapper/0: #0: (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 #1: (_xmit_ETHER#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 #2: (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 #3: (_xmit_IEEE80211#2){-+..}, at: [<ffffffff80456d71>] __qdisc_run+0x221/0x290 #4: (rcu_read_lock){..--}, at: [<ffffffffa0154919>] ieee80211_master_start_xmit+0x219/0x6c0 [mac80211] #5: (rcu_read_lock){..--}, at: [<ffffffffa01427c6>] ieee80211_start_tx_ba_session+0x66/0x4e0 [mac80211] #6: (rcu_read_lock){..--}, at: [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.29-rc2-wl #21 Call Trace: <IRQ> [<ffffffff8026c329>] __lock_acquire+0x1be9/0x1c40 [<ffffffff80442af1>] dev_queue_xmit+0xe1/0x620 [<ffffffff8026a8cc>] __lock_acquire+0x18c/0x1c40 [<ffffffff8026c3d5>] lock_acquire+0x55/0x70 [<ffffffff80456d71>] __qdisc_run+0x221/0x290 [<ffffffff804dbeb9>] _spin_lock+0x39/0x50 [<ffffffff80456d71>] __qdisc_run+0x221/0x290 [<ffffffff804dbd2f>] _spin_unlock+0x1f/0x50 [<ffffffff80456d71>] __qdisc_run+0x221/0x290 [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620 [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 [<ffffffffa0142a63>] ieee80211_start_tx_ba_session+0x303/0x4e0 [mac80211] [<ffffffffa01427c6>] ieee80211_start_tx_ba_session+0x66/0x4e0 [mac80211] [<ffffffffa0149dae>] rate_control_get_rate+0xae/0xc0 [mac80211] [<ffffffffa01526b5>] invoke_tx_handlers+0x655/0x1000 [mac80211] [<ffffffff802699fd>] mark_held_locks+0x4d/0x90 [<ffffffff804dbcf5>] _spin_unlock_irqrestore+0x65/0x80 [<ffffffffa0151aaa>] __ieee80211_tx_prepare+0x16a/0x310 [mac80211] [<ffffffffa0151adc>] __ieee80211_tx_prepare+0x19c/0x310 [mac80211] [<ffffffff80439cc2>] pskb_expand_head+0x112/0x190 [<ffffffffa0154986>] ieee80211_master_start_xmit+0x286/0x6c0 [mac80211] [<ffffffffa0154919>] ieee80211_master_start_xmit+0x219/0x6c0 [mac80211] [<ffffffff8026a8cc>] __lock_acquire+0x18c/0x1c40 [<ffffffff80456d8e>] __qdisc_run+0x23e/0x290 [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620 [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 [<ffffffffa0154221>] ieee80211_subif_start_xmit+0x4a1/0x980 [mac80211] [<ffffffffa0153f18>] ieee80211_subif_start_xmit+0x198/0x980 [mac80211] [<ffffffff80456d8e>] __qdisc_run+0x23e/0x290 [<ffffffff80442d18>] dev_queue_xmit+0x308/0x620 [<ffffffff80442a63>] dev_queue_xmit+0x53/0x620 [<ffffffffa028ecfd>] ip6_output+0x62d/0x1230 [ipv6] [<ffffffff8024ca00>] __mod_timer+0xb0/0xd0 [<ffffffffa02ad25a>] mld_sendpack+0x3fa/0x4a0 [ipv6] [<ffffffffa02ace60>] mld_sendpack+0x0/0x4a0 [ipv6] [<ffffffffa02adf90>] mld_ifc_timer_expire+0x0/0x340 [ipv6] [<ffffffffa02ae219>] mld_ifc_timer_expire+0x289/0x340 [ipv6] [<ffffffffa02adf90>] mld_ifc_timer_expire+0x0/0x340 [ipv6] [<ffffffff8024c097>] run_timer_softirq+0x147/0x220 [<ffffffff802473fb>] __do_softirq+0x9b/0x180 [<ffffffff80265516>] tick_dev_program_event+0x36/0xb0 [<ffffffff8020d77c>] call_softirq+0x1c/0x30 [<ffffffff8020f2c5>] do_softirq+0x65/0xb0 [<ffffffff80246ebd>] irq_exit+0x9d/0xc0 [<ffffffff80221db6>] smp_apic_timer_interrupt+0x86/0xd0 [<ffffffff8020d1b3>] apic_timer_interrupt+0x13/0x20 Signed-off-by: -
Ivo van Doorn authored
The get_firmware_crc() callback function isn't flexible enough when dealing with multiple firmware versions. It might in some cases be possible that the firmware file contains multiple CRC checksums. Create the check_firmware() callback function where the driver has complete freedom in how to validate the firmware. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Ivo van Doorn authored
provide rt2x00lib the possibility to kill a particular TX queue. This can be useful when disabling the radio, but more importantly will allow beaconing to be disabled when mac80211 requests this (during scanning for example) Signed-off-by:
-
Ivo van Doorn authored
ieee80211_iterate_active_interfaces() no longer acquires the RTNL lock which means the intf_work handler can be safely used from the mac80211 workqueue again. Signed-off-by:
-
Winkler, Tomas authored
This patch unifies 3945 and iwlagn power save management This patch also better separates system state from user setting. System state shall be removed later as this shall be shifted to user space Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Acked-by:
Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by:
-
Tomas Winkler authored
Call IWL_DEBUG macro with explicit priv argument. Signed-off-by:
Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by:
-
Winkler, Tomas authored
pci_enable_device is tagged with __must_check therefore don't ignore the return value in pci_resume handlers Signed-off-by:
-
Winkler, Tomas authored
iwl3945_send_tx_power must be static Signed-off-by:
-
Winkler, Tomas authored
This patch adds __maybe_unused attribute to priv variables used in functions that used it solely for debug printouts Signed-off-by:
-
Samuel Ortiz authored
The iwl_rxon_cmd is really just a iwl3945_rxon_cmd structure extension. So, we can use the *_rxon fields from iwl_priv instead of the 3945 specific ones (*39_rxon). We have to then be careful when submitting REPLY_RXON host commands, since the command length as to be set according to the HW. As another precaution the reserved4 and reserved5 fields are cleared before being sent to the 3945. With the *39_rxon removal, a lot of duplicated code can be removed from the 3945 code base. Signed-off-by:
-
Andrey Borzenkov authored
Fix errors and obvious warnings reported by checkpatch in all files except orinoco.c. Orinoco.c is part of different patch series of Dave. Signed-off-by:
Andrey Borzenkov <arvidjaar@gmail.com> Signed-off-by:
-
Herbert Xu authored
gro: Optimise TCP packet reception As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch uses bit ops to logical ops, as well as open coding memcmp to exploit alignment properties. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch does some obvious changes to use 2-byte and 4-byte operations instead of byte-oriented ones where possible. Bit ops are also used to replace logical ops to reduce branching. Signed-off-by:
-
Herbert Xu authored
This patch optimises the Ethernet header comparison to use 2-byte and 4-byte xors instead of memcmp. In order to facilitate this, the actual comparison is now carried out by the callers of the shared dev_gro_receive function. This has a significant impact when receiving 1500B packets through 10GbE. Signed-off-by:
-
Herbert Xu authored
This patch prepares for the move of the same_flow checks out of dev_gro_receive. As such we need to remember the number of held packets since doing a loop just to count them every time is silly. Signed-off-by:
-
David S. Miller authored
Several devices need to insert some "pre headers" in front of the main packet data when they transmit a packet. Currently we allocate only 16 bytes of pad room and this ends up not being enough for some types of hardware (NIU, usb-net, s390 qeth, etc.) So increase this to 32. Note that drivers still need to check in their transmit routine whether enough headroom exists, and if not use skb_realloc_headroom(). Tunneling, IPSEC, and other encapsulation methods can cause the padding area to be used up. Signed-off-by:
-
- 07 Feb, 2009 6 commits
-
-
David S. Miller authored
Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl3945-base.c
-
Jesse Brandeburg authored
Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Alexander Duyck authored
Update the version number to 1.3.16 and update copyright dates for 2009. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Alexander Duyck authored
This patch addresses two minor items I found while cleaning up the igb driver for our sourceforge version. The first clears the context index if we don't flag that we need it. The second item is that eims_other should be used instead of bit defines when setting all of the EICS bits prior to reset. Signed-off-by:
-
Alexander Duyck authored
It was seen with repeated interface up/down testing that there was a large stray between the stats reported by the queues and the stats reported by the HW. It was found to be an issue in that hw stats were being reset without first being recorded. This change records the stats before wiping them from the system via the reset. Signed-off-by:
-
Alexander Duyck authored
Remove the setting of ring->count variables from igb_probe as they are duplicating the same configuration that is done igb_alloc_queues. Remove the err_hw_init tag as it can be replaced by err_sw_init. Signed-off-by:
-
