- 08 Apr, 2009 6 commits
-
-
Eric Anholt authored
Otherwise, the results of our read didn't show up when we were faulting in the page being read into (as happened with a testcase reading into a big stack area). Likely accounts for some conformance test failures. Signed-off-by:Eric Anholt <eric@anholt.net>
-
Florian Mickler authored
i915_gem_put_relocs_to_user returned an uninitialized value which got returned to userspace. This caused libdrm in my setup to never get out of a do{}while() loop retrying i915_gem_execbuffer. result was hanging X, overheating of cpu and 2-3gb of logfile-spam. This patch adresses the issue by 1. initializing vars in this file where necessary 2. correcting wrongly interpreted return values of copy_[from/to]_user Signed-off-by:Florian Mickler <florian@mickler.org> [anholt: cleanups of unnecessary changes, consistency in APIs] Signed-off-by:
-
Ferenc Wagner authored
At the same time, bring the action message closer to the usual format. Signed-off-by:
Ferenc Wagner <wferi@niif.hu> Acked-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Ma Ling authored
Currently we detect HDMI monitor by hardware detection, but if an HDMI-DVI adapter is used to connect a DVI monitor, hardware detection will incorrectly take monitor as HDMI. HDMI spec says any device containing IEEE registration identifier will be treated as HDMI device. The patch intends to detect HDMI monitor by drm_detect_hdmi_monitor function which follows that rule. Signed-off-by:
Ma Ling <ling.ma@intel.com> Signed-off-by:
-
Shaohua Li authored
Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Signed-off-by:
-
Ben Gamari authored
We create a debugfs node (i915_ringbuffer_data) to expose a hex dump of the ring buffer itself. We also expose another debugfs node (i915_ringbuffer_info) with information on the state (i.e. head, tail addresses) of the ringbuffer. For batchbuffer dumping, we look at the device's active_list, dumping each object which has I915_GEM_DOMAIN_COMMAND in its read domains. This is all exposed through the dri/i915_batchbuffers debugfs file with a header for each object (giving the objects gtt_offset so that it can be matched against the offset given in the BATCH_BUFFER_START command. Signed-off-by:
Ben Gamari <bgamari@gmail.com> Signed-off-by:
Carl Worth <cworth@cworth.org> Signed-off-by:
-
- 03 Apr, 2009 34 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Remove two unneeded exports and make two symbols static in fs/mpage.c Cleanup after commit 585d3bc0 Trim includes of fdtable.h Don't crap into descriptor table in binfmt_som Trim includes in binfmt_elf Don't mess with descriptor table in load_elf_binary() Get rid of indirect include of fs_struct.h New helper - current_umask() check_unsafe_exec() doesn't care about signal handlers sharing New locking/refcounting for fs_struct Take fs_struct handling to new file (fs/fs_struct.c) Get rid of bumping fs_struct refcount in pivot_root(2) Kill unsharing fs_struct in __set_personality()
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits) drm/radeon: load the right microcode on rs780 drm: remove unused "can_grow" parameter from drm_crtc_helper_initial_config drm: fix EDID backward compat check drm: sync the mode validation for INTERLACE/DBLSCAN drm: fix typo in edid vendor parsing. DRM: drm_crtc_helper.h doesn't actually need i2c.h drm: fix missing inline function on 32-bit powerpc. drm: Use pgprot_writecombine in GEM GTT mapping to get the right bits for !PAT. drm/i915: Add a spinlock to protect the active_list drm/i915: Fix SDVO TV support drm/i915: Fix SDVO CREATE_PREFERRED_INPUT_TIMING command drm/i915: Fix error in SDVO DTD and modeline convert drm/i915: Fix SDVO command debug function drm/i915: fix TV mode setting in property change drm/i915: only set TV mode when any property changed drm/i915: clean up udelay usage drm/i915: add VGA hotplug support for 945+ drm/i915: correctly set IGD device's gtt size for KMS. drm/i915: avoid hanging on to a stale pointer to raw_edid. drm/i915: check for -EINVAL from vm_insert_pfn ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (54 commits) glge: remove unused #include <version.h> dnet: remove unused #include <version.h> tcp: miscounts due to tcp_fragment pcount reset tcp: add helper for counter tweaking due mid-wq change hso: fix for the 'invalid frame length' messages hso: fix for crash when unplugging the device fsl_pq_mdio: Fix compile failure fsl_pq_mdio: Revive UCC MDIO support ucc_geth: Pass proper device to DMA routines, otherwise oops happens i.MX31: Fixing cs89x0 network building to i.MX31ADS tc35815: Fix build error if NAPI enabled hso: add Vendor/Product ID's for new devices ucc_geth: Remove unused header gianfar: Remove unused header kaweth: Fix locking to be SMP-safe net: allow multiple dev per napi with GRO r8169: reset IntrStatus after chip reset ixgbe: Fix potential memory leak/driver panic issue while setting up Tx & Rx ring parameters ixgbe: fix ethtool -A|a behavior ixgbe: Patch to fix driver panic while freeing up tx & rx resources ...
-
Jack Steiner authored
Fix slab corruption caused by alloc_cpumask_var_node() overwriting the tail end of an off-stack cpumask. The function zeros out cpumask bits beyond the last possible cpu. The starting point for zeroing should be the beginning of the mask offset by a byte count derived from the number of possible cpus. The offset was calculated in bits instead of bytes. This resulted in overwriting the end of the cpumask. Signed-off-by:
Jack Steiner <steiner@sgi.com> Acked-by: Mike Travis <travis.sgi.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: <stable@kernel.org> [2.6.29.x] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Robin Holt authored
Implement __raw_read_lock_flags and __raw_write_lock_flags for the ia64 architecture. [kosaki.motohiro@jp.fujitsu.com: typo fix] Signed-off-by:
Petr Tesarik <ptesarik@suse.cz> Signed-off-by:
Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Robin Holt authored
Pass the original flags to rwlock arch-code, so that it can re-enable interrupts if implemented for that architecture. Initially, make __raw_read_lock_flags and __raw_write_lock_flags stubs which just do the same thing as non-flags variants. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <linux-arch@vger.kernel.org> Acked-by:
-
Robin Holt authored
SGI has observed that on large systems, interrupts are not serviced for a long period of time when waiting for a rwlock. The following patch series re-enables irqs while waiting for the lock, resembling the code which is already there for spinlocks. I only made the ia64 version, because the patch adds some overhead to the fast path. I assume there is currently no demand to have this for other architectures, because the systems are not so large. Of course, the possibility to implement raw_{read|write}_lock_flags for any architecture is still there. This patch: The new macro LOCK_CONTENDED_FLAGS expands to the correct implementation depending on the config options, so that IRQ's are re-enabled when possible, but they remain disabled if CONFIG_LOCKDEP is set. Signed-off-by: -
Coly Li authored
Make ufs return f_fsid info for statfs(2). Signed-off-by:
Coly Li <coly.li@suse.de> Cc: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by:
-
Coly Li authored
Make sysv file system return f_fsid info for statfs(2). Signed-off-by:
-
Coly Li authored
Make squashfs return f_fsid info for statfs(2). Signed-off-by:
-
Coly Li authored
Make reiserfs3 return f_fsid info for statfs(2). By Andreas' suggestion, this patch populates a persistent f_fsid between boots/mounts with help of on-disk uuid record. Randy Dunlap reported a compiling error from v2 patch like: fs/built-in.o: In function `reiserfs_statfs': super.c:(.text+0x7332b): undefined reference to `crc32_le' super.c:(.text+0x7333f): undefined reference to `crc32_le' Also he provided helpful solution to fix this error. The modification of v3 patch is based on Randy's suggestion, add 'select CRC32' in fs/reiserfs/Kconfig. Signed-off-by: -
Coly Li authored
Make qnx4 file system return f_fsid info for statfs(2). Signed-off-by:
Anders Larsen <al@alarsen.net> Signed-off-by:
-
Coly Li authored
Make omfs return f_fsid info for statfs(2). Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Coly Li authored
Make minix file system return f_fsid info for statfs(2). Signed-off-by:
-
Coly Li authored
Make isofs return f_fsid info for statfs(2). Signed-off-by:
-
Coly Li authored
Make hpfs return f_fsid info for statfs(2). Signed-off-by:
-
Coly Li authored
Make hfsplus return f_fsid info for statfs(2). Signed-off-by:
-
Coly Li authored
Make hfs return f_fsid info for statfs(2). Signed-off-by:
-
Coly Li authored
Make fat return f_fsid info for statfs(2). Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Coly Li authored
Make efs return f_fsid info for statfs(2), and do a little variable renaming in efs_statfs(). Signed-off-by:
-
Coly Li authored
Make cramfs return f_fsid info for statfs(2). Signed-off-by:
-
Coly Li authored
Make befs return f_fsid info for statfs(2). Signed-off-by:
-
Coly Li authored
Make affs return f_fsid info for statfs(2). Signed-off-by:
-
Coly Li authored
Currently many file systems in Linux kernel do not return f_fsid in statfs info, the value is set as 0 in vfs layer. Anyway, in some conditions, f_fsid from statfs(2) is useful, especially being used as (f_fsid, ino) pair to uniquely identify a file. Basic idea of the patches is generating a unique fs ID by huge_encode_dev(sb->s_bdev->bd_dev) during file system mounting life time (no endian consistent issue). sb is a point of struct super_block of current mounted file system being accessed by statfs(2). This patch: Make adfs return f_fsid info for statfs(2), and do a little variable renaming in adfs_statfs(). Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <linux-api@vger.kernel.org> Cc: <linux-arch@vger.kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ralf Baechle authored
Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Gerd Hoffmann authored
This patch adds preadv and pwritev system calls. These syscalls are a pretty straightforward combination of pread and readv (same for write). They are quite useful for doing vectored I/O in threaded applications. Using lseek+readv instead opens race windows you'll have to plug with locking. Other systems have such system calls too, for example NetBSD, check here: http://www.daemon-systems.org/man/preadv.2.html The application-visible interface provided by glibc should look like this to be compatible to the existing implementations in the *BSD family: ssize_t preadv(int d, const struct iovec *iov, int iovcnt, off_t offset); ssize_t pwritev(int d, const struct iovec *iov, int iovcnt, off_t offset); This prototype has one problem though: On 32bit archs is the (64bit) offset argument unaligned, which the syscall ABI of several archs doesn't allow to do. At least s390 needs a wrapper in glibc to handle this. As we'll need a wrappers in glibc anyway I've decided to push problem to glibc entriely and use a syscall prototype which works without arch-specific wrappers inside the kernel: The offset argument is explicitly splitted into two 32bit values. The patch sports the actual system call implementation and the windup in the x86 system call tables. Other archs follow as separate patches. Signed-off-by:
-
Gerd Hoffmann authored
Factor out some code from compat_sys_writev() which can be shared with the upcoming compat_sys_pwritev(). Signed-off-by:
-
Gerd Hoffmann authored
This patch series: Implement the preadv() and pwritev() syscalls. *BSD has this syscall for quite some time. Test code: #if 0 set -x gcc -Wall -O2 -o preadv $0 exit 0 #endif /* * preadv demo / test * * (c) 2008 Gerd Hoffmann <kraxel@redhat.com> * * build with "sh $thisfile" */ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <errno.h> #include <inttypes.h> #include <sys/uio.h> /* ----------------------------------------------------------------- */ /* syscall windup */ #include <sys/syscall.h> #if 0 /* WARNING: Be sure you know what you are doing if you enable this. * linux syscall code isn't upstream yet, syscall numbers are subject * to change */ # ifndef __NR_preadv # ifdef __i386__ # define __NR_preadv 333 # define __NR_pwritev 334 # endif # ifdef __x86_64__ # define __NR_preadv 295 # define __NR_pwritev 296 # endif # endif #endif #ifndef __NR_preadv # error preadv/pwritev syscall numbers are unknown #endif static ssize_t preadv(int fd, const struct iovec *iov, int iovcnt, off_t offset) { uint32_t pos_high = (offset >> 32) & 0xffffffff; uint32_t pos_low = offset & 0xffffffff; return syscall(__NR_preadv, fd, iov, iovcnt, pos_high, pos_low); } static ssize_t pwritev(int fd, const struct iovec *iov, int iovcnt, off_t offset) { uint32_t pos_high = (offset >> 32) & 0xffffffff; uint32_t pos_low = offset & 0xffffffff; return syscall(__NR_pwritev, fd, iov, iovcnt, pos_high, pos_low); } /* ----------------------------------------------------------------- */ /* demo/test app */ static char filename[] = "/tmp/preadv-XXXXXX"; static char outbuf[11] = "0123456789"; static char inbuf[11] = "----------"; static struct iovec ovec[2] = {{ .iov_base = outbuf + 5, .iov_len = 5, },{ .iov_base = outbuf + 0, .iov_len = 5, }}; static struct iovec ivec[3] = {{ .iov_base = inbuf + 6, .iov_len = 2, },{ .iov_base = inbuf + 4, .iov_len = 2, },{ .iov_base = inbuf + 2, .iov_len = 2, }}; void cleanup(void) { unlink(filename); } int main(int argc, char **argv) { int fd, rc; fd = mkstemp(filename); if (-1 == fd) { perror("mkstemp"); exit(1); } atexit(cleanup); /* write to file: "56789-01234" */ rc = pwritev(fd, ovec, 2, 0); if (rc < 0) { perror("pwritev"); exit(1); } /* read from file: "78-90-12" */ rc = preadv(fd, ivec, 3, 2); if (rc < 0) { perror("preadv"); exit(1); } printf("result : %s\n", inbuf); printf("expected: %s\n", "--129078--"); exit(0); } This patch: Factor out some code from compat_sys_readv() which can be shared with the upcoming compat_sys_preadv(). Signed-off-by: -
David VomLehn authored
Decompression errors can arise due to corruption of compressed blocks on flash or in memory. This patch propagates errors detected during decompression back to the block layer. Signed-off-by:
David VomLehn <dvomlehn@cisco.com> Signed-off-by:
-
Robin Holt authored
Fix a minor compile warning when building on ia64. drivers/misc/sgi-xp/xpc_sn2.c: In function `xpc_clear_remote_msgqueue_flags_sn2': drivers/misc/sgi-xp/xpc_sn2.c:1746: warning: comparison of distinct pointer types lacks a cast Signed-off-by:
-
Robin Holt authored
Some current configs turn on GRU for ia64. The GRU code does not correctly load on boot on ia64 (GRU does continue to work for x86-64), so changing the IA64 Kconfig to not select GRU on ia64 configs for now until we have time to fix. Signed-off-by:
-
Jack Steiner authored
Add multiple pagesize support to the GRU driver. Signed-off-by:
-
Jack Steiner authored
Fix bugs related to module unload of the GRU driver. Signed-off-by:
-
