We need to release the refcnt on dst_entry in the route table, otherwise
we will leak the route.

Fixes: 8e6a9046 ("nfp: flower vxlan neighbour offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

.ndo_get_phys_port_name was recently extended to support multi-vNIC
FWs.  These are firmwares which can have more than one vNIC per PF
without associated port (e.g. Adaptive Buffer Management FW), therefore
we need a way of distinguishing the vNICs.  Unfortunately, it's too
late to make flower use the same naming.  Flower users may depend on
.ndo_get_phys_port_name returning -EOPNOTSUPP, for example the name
udev gave the PF vNIC was just the bare PCI device-based name before
the change, and will have 'nn0' appended after.

To ensure flower's vNIC doesn't have phys_port_name attribute, add
a flag to vNIC struct and set it in flower code.  New projects will
not set the flag adhere to the naming scheme from the start.

Fixes: 51c1df83 ("nfp: assign vNIC id as phys_port_name of vNICs which are not ports")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We are gathering software statistics on per-ring basis.
.ndo_get_stats64 handler adds the rings up.  Unfortunately
we are currently only adding up active rings, which means
that if user decreases the number of active rings the
statistics from deactivated rings will no longer be counted
and total interface statistics may go backwards.

Always sum all possible rings, the stats are allocated
statically for max number of rings, so we don't have to
worry about them being removed.  We could add the stats
up when user changes the ring count, but it seems unnecessary..
Adding up inactive rings will be very quick since no datapath
will be touching them.

Fixes: 164d1e9e ("nfp: add support for ethtool .set_channels")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Once upon a time nfp_cpp_resource_find() took a name parameter,
which could be any user-chosen string.  Resources are identified
by a CRC32 hash of a 8 byte string, so we had to pad user input
with zeros to make sure CRC32 gave the correct result.

Since then nfp_cpp_resource_find() was made to operate on allocated
resources only (struct nfp_resource).  We kzalloc those so there is
no need to pad the strings and use memcmp.

This avoids a GCC 8 stringop-truncation warning:

In function ‘nfp_cpp_resource_find’,
    inlined from ‘nfp_resource_try_acquire’ at .../nfpcore/nfp_resource.c:153:8,
    inlined from ‘nfp_resource_acquire’ at .../nfpcore/nfp_resource.c:206:9:
    .../nfpcore/nfp_resource.c:108:2: warning:  strncpy’ output may be truncated copying 8 bytes from a string of length 8 [-Wstringop-truncation]
      strncpy(name_pad, res->name, sizeof(name_pad));
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert the patch mentioned in the subject because it breaks at least
the Avahi mDNS daemon. That patch namely causes the Ubuntu 18.04 Avahi
daemon to fail to start:

Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: Successfully called chroot().
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: Successfully dropped remaining capabilities.
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: No service file found in /etc/avahi/services.
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: SO_REUSEADDR failed: Structure needs cleaning
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: SO_REUSEADDR failed: Structure needs cleaning
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: Failed to create server: No suitable network protocol available
Jun 12 09:49:24 ubuntu-vm avahi-daemon[529]: avahi-daemon 0.7 exiting.
Jun 12 09:49:24 ubuntu-vm systemd[1]: avahi-daemon.service: Main process exited, code=exited, status=255/n/a
Jun 12 09:49:24 ubuntu-vm systemd[1]: avahi-daemon.service: Failed with result 'exit-code'.
Jun 12 09:49:24 ubuntu-vm systemd[1]: Failed to start Avahi mDNS/DNS-SD Stack.

Fixes: f396922d ("net: do not allow changing SO_REUSEADDR/SO_REUSEPORT on bound sockets")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is not necessary.  skb_gro_receive() will never change what
'head' points to.

In it's original implementation (see commit 71d93b39 ("net: Add
skb_gro_receive")), it did:

====================
+	*head = nskb;
+	nskb->next = p->next;
+	p->next = NULL;
====================

This sequence was removed in commit 58025e46 ("net: gro: remove
obsolete code from skb_gro_receive()")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>

Daniel Borkmann says:

====================
pull-request: bpf 2018-06-12

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Avoid an allocation warning in AF_XDP by adding __GFP_NOWARN for the
   umem setup, from Björn.

2) Silence a warning in bpf fs when an application tries to open(2) a
   pinned bpf obj due to missing fops. Add a dummy open fop that continues
   to just bail out in such case, from Daniel.

3) Fix a BPF selftest urandom_read build issue where gcc complains that
   it gets built twice, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-06-11

This series contains fixes to ixgbe IPsec and MACVLAN.

Alex provides the 5 fixes in this series, starting with fixing an issue
where num_rx_pools was not being populated until after the queues and
interrupts were reinitialized when enabling MACVLAN interfaces.  Updated
to use CONFIG_XFRM_OFFLOAD instead of CONFIG_XFRM, since the code
requires CONFIG_XFRM_OFFLOAD to be enabled.  Moved the IPsec
initialization function to be more consistent with the placement of
similar initialization functions and before the call to reset the
hardware, which will clean up any link issues that may have been
introduced.  Fixed the boolean logic that was testing for transmit OR
receive ready bits, when it should have been testing for transmit AND
receive ready bits.  Fixed the bit definitions for SECTXSTAT and SECRXSTAT
registers and ensure that if IPsec is disabled on the part, do not
enable it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Valdis reported a BUG in ipv6_add_addr:

[ 1820.832682] BUG: unable to handle kernel NULL pointer dereference at 0000000000000209
[ 1820.832728] RIP: 0010:ipv6_add_addr+0x280/0xd10
[ 1820.832732] Code: 49 8b 1f 0f 84 6a 0a 00 00 48 85 db 0f 84 4e 0a 00 00 48 8b 03 48 8b 53 08 49 89 45 00 49 8b 47 10
49 89 55 08 48 85 c0 74 15 <48> 8b 50 08 48 8b 00 49 89 95 b8 01 00 00 49 89 85 b0 01 00 00 4c
[ 1820.832847] RSP: 0018:ffffaa07c2fd7880 EFLAGS: 00010202
[ 1820.832853] RAX: 0000000000000201 RBX: ffffaa07c2fd79b0 RCX: 0000000000000000
[ 1820.832858] RDX: a4cfbfba2cbfa64c RSI: 0000000000000000 RDI: ffffffff8a8e9fa0
[ 1820.832862] RBP: ffffaa07c2fd7920 R08: 000000000000017a R09: ffffffff8a555300
[ 1820.832866] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888d18e71c00
[ 1820.832871] R13: ffff888d0a9b1200 R14: 0000000000000000 R15: ffffaa07c2fd7980
[ 1820.832876] FS:  00007faa51bdb800(0000) GS:ffff888d1d400000(0000) knlGS:0000000000000000
[ 1820.832880] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1820.832885] CR2: 0000000000000209 CR3: 000000021e8f8001 CR4: 00000000001606e0
[ 1820.832888] Call Trace:
[ 1820.832898]  ? __local_bh_enable_ip+0x119/0x260
[ 1820.832904]  ? ipv6_create_tempaddr+0x259/0x5a0
[ 1820.832912]  ? __local_bh_enable_ip+0x139/0x260
[ 1820.832921]  ipv6_create_tempaddr+0x2da/0x5a0
[ 1820.832926]  ? ipv6_create_tempaddr+0x2da/0x5a0
[ 1820.832941]  manage_tempaddrs+0x1a5/0x240
[ 1820.832951]  inet6_addr_del+0x20b/0x3b0
[ 1820.832959]  ? nla_parse+0xce/0x1e0
[ 1820.832968]  inet6_rtm_deladdr+0xd9/0x210
[ 1820.832981]  rtnetlink_rcv_msg+0x1d4/0x5f0

Looking at the code I found 1 element (peer_pfx) of the newly introduced
ifa6_config struct that is not initialized. Use a memset rather than hard
coding an init for each struct element.
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Fixes: e6464b8c ("net/ipv6: Convert ipv6_add_addr to struct ifa6_config")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While hacking on kTLS, I ran into the following panic from an
unprivileged netserver / netperf TCP session:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  PGD 800000037f378067 P4D 800000037f378067 PUD 3c0e61067 PMD 0
  Oops: 0010 [#1] SMP KASAN PTI
  CPU: 1 PID: 2289 Comm: netserver Not tainted 4.17.0+ #139
  Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016
  RIP: 0010:          (null)
  Code: Bad RIP value.
  RSP: 0018:ffff88036abcf740 EFLAGS: 00010246
  RAX: dffffc0000000000 RBX: ffff88036f5f6800 RCX: 1ffff1006debed26
  RDX: ffff88036abcf920 RSI: ffff8803cb1a4f00 RDI: ffff8803c258c280
  RBP: ffff8803c258c280 R08: ffff8803c258c280 R09: ffffed006f559d48
  R10: ffff88037aacea43 R11: ffffed006f559d49 R12: ffff8803c258c280
  R13: ffff8803cb1a4f20 R14: 00000000000000db R15: ffffffffc168a350
  FS:  00007f7e631f4700(0000) GS:ffff8803d1c80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffffffffffffd6 CR3: 00000003ccf64005 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   ? tls_sw_poll+0xa4/0x160 [tls]
   ? sock_poll+0x20a/0x680
   ? do_select+0x77b/0x11a0
   ? poll_schedule_timeout.constprop.12+0x130/0x130
   ? pick_link+0xb00/0xb00
   ? read_word_at_a_time+0x13/0x20
   ? vfs_poll+0x270/0x270
   ? deref_stack_reg+0xad/0xe0
   ? __read_once_size_nocheck.constprop.6+0x10/0x10
  [...]

Debugging further, it turns out that calling into ctx->sk_poll() is
invalid since sk_poll itself is NULL which was saved from the original
TCP socket in order for tls_sw_poll() to invoke it.

Looks like the recent conversion from poll to poll_mask callback started
in 15252423 ("net: add support for ->poll_mask in proto_ops") missed
to eventually convert kTLS, too: TCP's ->poll was converted over to the
->poll_mask in commit 2c7d3dac ("net/tcp: convert to ->poll_mask")
and therefore kTLS wrongly saved the ->poll old one which is now NULL.

Convert kTLS over to use ->poll_mask instead. Also instead of POLLIN |
POLLRDNORM use the proper EPOLLIN | EPOLLRDNORM bits as the case in
tcp_poll_mask() as well that is mangled here.

Fixes: 2c7d3dac ("net/tcp: convert to ->poll_mask")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Watson <davejwatson@fb.com>
Tested-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller reported a warning from xdp_umem_pin_pages():

  WARNING: CPU: 1 PID: 4537 at mm/slab_common.c:996 kmalloc_slab+0x56/0x70 mm/slab_common.c:996
  ...
  __do_kmalloc mm/slab.c:3713 [inline]
  __kmalloc+0x25/0x760 mm/slab.c:3727
  kmalloc_array include/linux/slab.h:634 [inline]
  kcalloc include/linux/slab.h:645 [inline]
  xdp_umem_pin_pages net/xdp/xdp_umem.c:205 [inline]
  xdp_umem_reg net/xdp/xdp_umem.c:318 [inline]
  xdp_umem_create+0x5c9/0x10f0 net/xdp/xdp_umem.c:349
  xsk_setsockopt+0x443/0x550 net/xdp/xsk.c:531
  __sys_setsockopt+0x1bd/0x390 net/socket.c:1935
  __do_sys_setsockopt net/socket.c:1946 [inline]
  __se_sys_setsockopt net/socket.c:1943 [inline]
  __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1943
  do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

This is a warning about attempting to allocate more than
KMALLOC_MAX_SIZE memory. The request originates from userspace, and if
the request is too big, the kernel is free to deny its allocation. In
this patch, the failed allocation attempt is silenced with
__GFP_NOWARN.

Fixes: c0c77d8f ("xsk: add user memory registration support sockopt")
Reported-by: syzbot+4abadc5d69117b346506@syzkaller.appspotmail.com
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for your net tree:

1) Reject non-null terminated helper names from xt_CT, from Gao Feng.

2) Fix KASAN splat due to out-of-bound access from commit phase, from
   Alexey Kodanev.

3) Missing conntrack hook registration on IPVS FTP helper, from Julian
   Anastasov.

4) Incorrect skbuff allocation size in bridge nft_reject, from Taehee Yoo.

5) Fix inverted check on packet xmit to non-local addresses, also from
   Julian.

6) Fix ebtables alignment compat problems, from Alin Nastac.

7) Hook mask checks are not correct in xt_set, from Serhey Popovych.

8) Fix timeout listing of element in ipsets, from Jozsef.

9) Cap maximum timeout value in ipset, also from Jozsef.

10) Don't allow family option for hash:mac sets, from Florent Fourcot.

11) Restrict ebtables to work with NFPROTO_BRIDGE targets only, this
    Florian.

12) Another bug reported by KASAN in the rbtree set backend, from
    Taehee Yoo.

13) Missing __IPS_MAX_BIT update doesn't include IPS_OFFLOAD_BIT.
    From Gao Feng.

14) Missing initialization of match/target in ebtables, from Florian
    Westphal.

15) Remove useless nft_dup.h file in include path, from C. Labbe.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When pskb_trim_rcsum fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling pskb_trim_rcsum.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPVS setups with local client and remote tunnel server need
to create exception for the local virtual IP. What we do is to
change PMTU from 64KB (on "lo") to 1460 in the common case.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Fixes: 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Fixes: 7343ff31 ("ipv6: Don't create clones of host routes.")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch addresses two issues. First it adds the correct bit definitions
for the SECTXSTAT and SECRXSTAT registers. Then it makes use of those
definitions to test for if IPsec has been disabled on the part and if so we
do not enable it.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reported-by: Andre Tomt <andre@tomt.net>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes two issues. First we add an early test for the Tx and Rx
security block ready bits. By doing this we can avoid the need for waits or
loopback in the event that the security block is already flushed out.
Secondly we fix the boolean logic that was testing for the Tx OR Rx ready
bits being set and change it so that we only exit if the Tx AND Rx ready
bits are both set.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch moves the IPsec init function in ixgbe_sw_init. This way it is a
bit more consistent with the placement of similar initialization functions
and is placed before the reset_hw call which should allow us to clean up
any link issues that may be introduced by the fact that we force the link
up if somehow the device had IPsec still enabled before the driver was
loaded.

In addition to the function move it is necessary to change the assignment
of netdev->features. The easiest way to do this is to just test for the
existence of adapter->ipsec and if it is present we set the feature bits.

Fixes: 49a94d74 ("ixgbe: add ipsec engine start and stop routines")
Reported-by: Andre Tomt <andre@tomt.net>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

There is no point in adding code if CONFIG_XFRM is defined that we won't
use unless CONFIG_XFRM_OFFLOAD is defined. So instead of leaving this code
floating around I am replacing the ifdef with what I believe is the correct
one so that we only include the code and variables if they will actually be
used.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When we were enabling macvlan interfaces we weren't correctly configuring
things until ixgbe_setup_tc was called a second time either by tweaking the
number of queues or increasing the macvlan count past 15.

The issue came down to the fact that num_rx_pools is not populated until
after the queues and interrupts are reinitialized.

Instead of trying to set it sooner we can just move the call to setup at
least 1 traffic class to the SR-IOV/VMDq setup function so that we just set
it for this one case. We already had a spot that was configuring the queues
for TC 0 in the code here anyway so it makes sense to also set the number
of TCs here as well.

Fixes: 49cfbeb7 ("ixgbe: Fix handling of macvlan Tx offload")
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

gcc complains that urandom_read gets built twice.

gcc -o tools/testing/selftests/bpf/urandom_read
-static urandom_read.c -Wl,--build-id
gcc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf
-I../../../../include/generated  -I../../../include    urandom_read.c
urandom_read -lcap -lelf -lrt -lpthread -o
tools/testing/selftests/bpf/urandom_read
gcc: fatal error: input file
‘tools/testing/selftests/bpf/urandom_read’ is the
same as output file
compilation terminated.
../lib.mk:110: recipe for target
'tools/testing/selftests/bpf/urandom_read' failed
To fix this issue remove the urandom_read target and so target
TEST_CUSTOM_PROGS gets used.

Fixes: 81f77fd0 ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Pull networking fixes from David Miller:

 1) Fix several bpfilter/UMH bugs, in particular make the UMH build not
    depend upon X86 specific Kconfig symbols. From Alexei Starovoitov.

 2) Fix handling of modified context pointer in bpf verifier, from
    Daniel Borkmann.

 3) Kill regression in ifdown/ifup sequences for hv_netvsc driver, from
    Dexuan Cui.

 4) When the bonding primary member name changes, we have to re-evaluate
    the bond->force_primary setting, from Xiangning Yu.

 5) Eliminate possible padding beyone end of SKB in cdc_ncm driver, from
    Bjørn Mork.

 6) RX queue length reported for UDP sockets in procfs and socket diag
    are inaccurate, from Paolo Abeni.

 7) Fix br_fdb_find_port() locking, from Petr Machata.

 8) Limit sk_rcvlowat values properly in TCP, from Soheil Hassas
    Yeganeh.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits)
  tcp: limit sk_rcvlowat by the maximum receive buffer
  net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620
  socket: close race condition between sock_close() and sockfs_setattr()
  net: bridge: Fix locking in br_fdb_find_port()
  udp: fix rx queue len reported by diag and proc interface
  cdc_ncm: avoid padding beyond end of skb
  net/sched: act_simple: fix parsing of TCA_DEF_DATA
  net: fddi: fix a possible null-ptr-deref
  net: aquantia: fix unsigned numvecs comparison with less than zero
  net: stmmac: fix build failure due to missing COMMON_CLK dependency
  bpfilter: fix race in pipe access
  bpf, xdp: fix crash in xdp_umem_unaccount_pages
  xsk: Fix umem fill/completion queue mmap on 32-bit
  tools/bpf: fix selftest get_cgroup_id_user
  bpfilter: fix OUTPUT_FORMAT
  umh: fix race condition
  net: mscc: ocelot: Fix uninitialized error in ocelot_netdevice_event()
  bonding: re-evaluate force_primary when the primary slave name changes
  ip_tunnel: Fix name string concatenate in __ip_tunnel_create()
  hv_netvsc: Fix a network regression after ifdown/ifup
  ...

Pull RTC updates from Alexandre Belloni:
 "Setting the supported range from drivers for RTCs failing soon has
  started. A few fixes are developed along the way. Some drivers have
  been switched to SPDX by their maintainers.

  Subsystem:

   - rework of the rtc-test driver which allows to test the core more
     thoroughly

   - rtc_set_alarm() now fails early when alarms are not supported

  Drivers:

   - mktime() is now replaced by mktime64()

   - RTC range added for 88pm80x, ab-b5ze-s3, at91rm9200,
     brcmstb-waketimer, ds1685, ftrtc010, ls1x, mxc_v2, rx8581, sprd,
     st-lpc, tps6586x, tps65910 and vr41xx

   - fixed a possible race condition in probe functions

   - pxa: fix the probe function that is broken since v4.3

   - stm32: now supports stm32mp1"

* tag 'rtc-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (78 commits)
  rtc: pxa: fix probe function
  rtc: cros-ec: Switch to SPDX identifier.
  rtc: cros-ec: Make license text and module license match.
  rtc: ensure rtc_set_alarm fails when alarms are not supported
  rtc: test: remove alarm support from the first device
  rtc: test: convert to devm_rtc_allocate_device
  rtc: ftrtc010: let the core handle range
  rtc: ftrtc010: handle dates after 2106
  rtc: ftrtc010: switch to devm_rtc_allocate_device
  rtc: mrst: switch to devm functions
  rtc: sunxi: fix possible race condition
  rtc: test: remove irq sysfs file
  rtc: test: emulate alarms using timers
  rtc: test: store time as an offset to system time
  rtc: test: allow registering many devices
  rtc: test: remove useless proc info
  rtc: ds1685: Add range
  rtc: ds1685: fix possible race condition
  rtc: sprd: Add new RTC power down check method
  rtc: sun6i: Fix bit_idx value for clk_register_gate
  ...

Pull UBI and UBIFS updates from Richard Weinberger:

 - the UBI on-disk format header file is now dual licensed

 - new way to detect Fastmap problems during runtime

 - bugfix for Fastmap

 - minor updates for UBIFS (spelling, comments, vm_fault_t, ...)

* tag 'upstream-4.18-rc1' of git://git.infradead.org/linux-ubifs:
  mtd: ubi: Update ubi-media.h to dual license
  ubi: fastmap: Detect EBA mismatches on-the-fly
  ubi: fastmap: Check each mapping only once
  ubi: fastmap: Correctly handle interrupted erasures in EBA
  ubi: fastmap: Cancel work upon detach
  ubifs: lpt: Fix wrong pnode number range in comment
  ubifs: gc: Fix typo
  ubifs: log: Some spelling fixes
  ubifs: Spelling fix someting -> something
  ubifs: journal: Remove wrong comment
  ubifs: remove set but never used variable
  ubifs, xattr: remove misguided quota flags
  fs: ubifs: Adding new return type vm_fault_t

The user-provided value to setsockopt(SO_RCVLOWAT) can be
larger than the maximum possible receive buffer. Such values
mute POLLIN signals on the socket which can stall progress
on the socket.

Limit the user-provided value to half of the maximum receive
buffer, i.e., half of sk_rcvbuf when the receive buffer size
is set by the user, or otherwise half of sysctl_tcp_rmem[2].

Fixes: d1361840 ("tcp: fix SO_RCVLOWAT and RCVBUF autotuning")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
  xfcp, hisi_sas, cxlflash, qla2xxx.

  In the absence of Nic, we're also taking target updates which are
  mostly minor except for the tcmu refactor.

  The only real core change to worry about is the removal of high page
  bouncing (in sas, storvsc and iscsi). This has been well tested and no
  problems have shown up so far"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
  scsi: lpfc: update driver version to 12.0.0.4
  scsi: lpfc: Fix port initialization failure.
  scsi: lpfc: Fix 16gb hbas failing cq create.
  scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
  scsi: lpfc: correct oversubscription of nvme io requests for an adapter
  scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
  scsi: hisi_sas: Mark PHY as in reset for nexus reset
  scsi: hisi_sas: Fix return value when get_free_slot() failed
  scsi: hisi_sas: Terminate STP reject quickly for v2 hw
  scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
  scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
  scsi: hisi_sas: Try wait commands before before controller reset
  scsi: hisi_sas: Init disks after controller reset
  scsi: hisi_sas: Create a scsi_host_template per HW module
  scsi: hisi_sas: Reset disks when discovered
  scsi: hisi_sas: Add LED feature for v3 hw
  scsi: hisi_sas: Change common allocation mode of device id
  scsi: hisi_sas: change slot index allocation mode
  scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
  scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
  ...

DP83620 register set is compatible with the DP83848, but it also supports
100base-FX. When the hardware is configured such as that fiber mode is
enabled, autonegotiation is not possible.

The chip, however, doesn't expose this information via BMSR_ANEGCAPABLE.
Instead, this bit is always set high, even if the particular hardware
configuration makes it so that auto negotiation is not possible [1]. Under
these circumstances, the phy subsystem keeps trying for autonegotiation to
happen, without success.

Hereby, we inspect BMCR_ANENABLE bit after genphy_config_init, which on
reset is set to 0 when auto negotiation is disabled, and so we use this
value instead of BMSR_ANEGCAPABLE.

[1] https://e2e.ti.com/support/interface/ethernet/f/903/p/697165/2571170Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fchownat() doesn't even hold refcnt of fd until it figures out
fd is really needed (otherwise is ignored) and releases it after
it resolves the path. This means sock_close() could race with
sockfs_setattr(), which leads to a NULL pointer dereference
since typically we set sock->sk to NULL in ->release().

As pointed out by Al, this is unique to sockfs. So we can fix this
in socket layer by acquiring inode_lock in sock_close() and
checking against NULL in sockfs_setattr().

sock_release() is called in many places, only the sock_close()
path matters here. And fortunately, this should not affect normal
sock_close() as it is only called when the last fd refcnt is gone.
It only affects sock_close() with a parallel sockfs_setattr() in
progress, which is not common.

Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.")
Reported-by: shankarapailoor <shankarapailoor@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull cifs fixes from Steve French:

 - one smb3 (ACL related) fix for stable

 - one SMB3 security enhancement (when mounting -t smb3 forbid less
   secure dialects)

 - some RDMA and compounding fixes

* tag '4.18-fixes-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix a buffer leak in smb2_query_symlink
  smb3: do not allow insecure cifs mounts when using smb3
  CIFS: Fix NULL ptr deref
  CIFS: fix encryption in SMB3.1.1
  CIFS: Pass page offset for encrypting
  CIFS: Pass page offset for calculating signature
  CIFS: SMBD: Support page offset in memory registration
  CIFS: SMBD: Support page offset in RDMA recv
  CIFS: SMBD: Support page offset in RDMA send
  CIFS: When sending data on socket, pass the correct page offset
  CIFS: Introduce helper function to get page offset and length in smb_rqst
  CIFS: Calculate the correct request length based on page offset and tail size
  cifs: For SMB2 security informaion query, check for minimum sized security descriptor instead of sizeof FileAllInformation class
  CIFS: Fix signing for SMB2/3

Pull block flush handling fix from Jens Axboe:
 "Single fix that we should merge now, fixing a regression in queuing
  flush request, accessing request flags after calling the end_request
  handler"

* tag 'for-linus-20180610' of git://git.kernel.dk/linux-block:
  block: fix use-after-free in block flush handling

Pull restartable sequence support from Thomas Gleixner:
 "The restartable sequences syscall (finally):

  After a lot of back and forth discussion and massive delays caused by
  the speculative distraction of maintainers, the core set of
  restartable sequences has finally reached a consensus.

  It comes with the basic non disputed core implementation along with
  support for arm, powerpc and x86 and a full set of selftests

  It was exposed to linux-next earlier this week, so it does not fully
  comply with the merge window requirements, but there is really no
  point to drag it out for yet another cycle"

* 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rseq/selftests: Provide Makefile, scripts, gitignore
  rseq/selftests: Provide parametrized tests
  rseq/selftests: Provide basic percpu ops test
  rseq/selftests: Provide basic test
  rseq/selftests: Provide rseq library
  selftests/lib.mk: Introduce OVERRIDE_TARGETS
  powerpc: Wire up restartable sequences system call
  powerpc: Add syscall detection for restartable sequences
  powerpc: Add support for restartable sequences
  x86: Wire up restartable sequence system call
  x86: Add support for restartable sequences
  arm: Wire up restartable sequences system call
  arm: Add syscall detection for restartable sequences
  arm: Add restartable sequences support
  rseq: Introduce restartable sequences system call
  uapi/headers: Provide types_32_64.h

Pull x86 updates and fixes from Thomas Gleixner:

 - Fix the (late) fallout from the vector management rework causing
   hlist corruption and irq descriptor reference leaks caused by a
   missing sanity check.

   The straight forward fix triggered another long standing issue to
   surface. The pre rework code hid the issue due to being way slower,
   but now the chance that user space sees an EBUSY error return when
   updating irq affinities is way higher, though quite a bunch of
   userspace tools do not handle it properly despite the fact that EBUSY
   could be returned for at least 10 years.

   It turned out that the EBUSY return can be avoided completely by
   utilizing the existing delayed affinity update mechanism for irq
   remapped scenarios as well. That's a bit more error handling in the
   kernel, but avoids fruitless fingerpointing discussions with tool
   developers.

 - Decouple PHYSICAL_MASK from AMD SME as its going to be required for
   the upcoming Intel memory encryption support as well.

 - Handle legacy device ACPI detection properly for newer platforms

 - Fix the wrong argument ordering in the vector allocation tracepoint

 - Simplify the IDT setup code for the APIC=n case

 - Use the proper string helpers in the MTRR code

 - Remove a stale unused VDSO source file

 - Convert the microcode update lock to a raw spinlock as its used in
   atomic context.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel_rdt: Enable CMT and MBM on new Skylake stepping
  x86/apic/vector: Print APIC control bits in debugfs
  genirq/affinity: Defer affinity setting if irq chip is busy
  x86/platform/uv: Use apic_ack_irq()
  x86/ioapic: Use apic_ack_irq()
  irq_remapping: Use apic_ack_irq()
  x86/apic: Provide apic_ack_irq()
  genirq/migration: Avoid out of line call if pending is not set
  genirq/generic_pending: Do not lose pending affinity update
  x86/apic/vector: Prevent hlist corruption and leaks
  x86/vector: Fix the args of vector_alloc tracepoint
  x86/idt: Simplify the idt_setup_apic_and_irq_gates()
  x86/platform/uv: Remove extra parentheses
  x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME
  x86: Mark native_set_p4d() as __always_inline
  x86/microcode: Make the late update update_lock a raw lock for RT
  x86/mtrr: Convert to use strncpy_from_user() helper
  x86/mtrr: Convert to use match_string() helper
  x86/vdso: Remove unused file
  x86/i8237: Register device based on FADT legacy boot flag

Pull x86 pti updates from Thomas Gleixner:
 "Three small commits updating the SSB mitigation to take the updated
  AMD mitigation variants into account"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/bugs: Switch the selection of mitigation from CPU vendor to CPU features
  x86/bugs: Add AMD's SPEC_CTRL MSR usage
  x86/bugs: Add AMD's variant of SSB_NO

Pull more perf tooling updates from Thomas Gleixner:
 "Perf tool updates and fixes:

  perf stat:

   - Display user and system time for workload targets (Jiri Olsa)

  perf record:

   - Enable arbitrary event names thru name= modifier (Alexey Budankov)

  PowerPC:

   - Add a python script for hypervisor call statistics (Ravi Bangoria)

  Intel PT: (Adrian Hunter)

   - Fix sync_switch INTEL_PT_SS_NOT_TRACING

   - Fix decoding to accept CBR between FUP and corresponding TIP

   - Fix MTC timing after overflow

   - Fix "Unexpected indirect branch" error

  perf test:

   - record+probe_libc_inet_pton:
      - To get the symbol table for dynamic shared objects on ubuntu we
        need to pass the -D/--dynamic command line option, unlike with
        the fedora distros (Arnaldo Carvalho de Melo)

   - code-reading:
      - Fix perf_env setup for PTI entry trampolines (Adrian Hunter)

   - kmod-path:
      - Add tests for vdso32 and vdsox32 (Adrian Hunter)

   - Use header file util/debug.h (Thomas Richter)

  perf annotate:

   - Make the various UI backends (stdio, TUI, gtk) use more
     consistently structs with annotation options as specified by the
     user (Arnaldo Carvalho de Melo)

   - Move annotation specific knobs from the symbol_conf global kitchen
     sink to the annotation option structs (Arnaldo Carvalho de Melo)

  perf script:

   - Add more PMU fields to python scripts event handler dict (Jin Yao)

  Core:

   - Fix misleading error for some unparsable events mentioning PMUs
     when those are not involved in the problem (Jiri Olsa)

   - Consider BSS symbols when processing /proc/kallsyms ('B' and 'b')
     (Arnaldo Carvalho de Melo)

   - Be more robust when trying to use per-symbol histograms, checking
     for unlikely but possible cases where the space for the histograms
     wasn't allocated, print a debug message for such cases (Arnaldo
     Carvalho de Melo)

   - Fix symbol and object code resolution for vdso32 and vdsox32
     (Adrian Hunter)

   - No need to check for null when passing pointers to foo__get() style
     refcount grabbing helpers, just like in the kernel and with free(),
     its safe to pass a NULL pointer to avoid having to check it before
     each and every foo__get() call (Arnaldo Carvalho de Melo)

   - Remove some dead code (quote.[ch]) (Arnaldo Carvalho de Melo)

   - Remove some needless globals, making them local (Arnaldo Carvalho
     de Melo)

   - Reduce usage of symbol_conf.use_callchain, using other means of
     finding out if callchains are in use or available for specific
     events, as we evolved this codebase to allow requesting callchains
     for just a subset of the monitored events. In time it will help
     polish recording and showing mixed sets accross the various tools:

        perf record -e cycles/call-graph=fp/,cache-misses/call-graph=dwarf/,instructions'

     (Arnaldo Carvalho de Melo)

   - Consider PTI entry trampolines in map__rip_2objdump() (Adrian
     Hunter)"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  perf script python: Add dict fields introduction to Documentation
  perf script python: Add more PMU fields to event handler dict
  perf script python: Move dsoname code to a new function
  perf symbols: Add BSS symbols when reading from /proc/kallsyms
  perf annnotate: Make __symbol__inc_addr_samples handle src->histograms == NULL
  perf intel-pt: Fix "Unexpected indirect branch" error
  perf intel-pt: Fix MTC timing after overflow
  perf intel-pt: Fix decoding to accept CBR between FUP and corresponding TIP
  perf intel-pt: Fix sync_switch INTEL_PT_SS_NOT_TRACING
  perf script powerpc: Python script for hypervisor call statistics
  perf test record+probe_libc_inet_pton: Ask 'nm' for dynamic symbols
  perf map: Consider PTI entry trampolines in rip_2objdump()
  perf test code-reading: Fix perf_env setup for PTI entry trampolines
  perf tools: Fix pmu events parsing rule
  perf stat: Display user and system time
  perf record: Enable arbitrary event names thru name= modifier
  perf tools: Fix symbol and object code resolution for vdso32 and vdsox32
  perf tests kmod-path: Add tests for vdso32 and vdsox32
  perf hists: Check if a hist_entry has callchains before using them
  perf hists: Introduce hist_entry__has_callchain() method
  ...

Pull irq fixes from Thomas Gleixner:
 "Two small fixlets:

   - Add the missing iomu mapping call in the Freescale/NXP/Qualcomm/
     whoever owns it now/ SCFG MSI irqchip driver. Otherwise IRQs wont
     work at all.

   - Fix a SMP=n build warning in the STM32 irq chip driver"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/ls-scfg-msi: Map MSIs in the iommu
  irqchip/stm32: Fix non-SMP build warning

Pull core fixes from Thomas Gleixner:
 "A small set of core updates:

   - Make objtool cope with GCC8 oddities some more

   - Remove a stale local_irq_save/restore sequence in the signal code
     along with the stale comment in the RCU code. The underlying issue
     which led to this has been solved long time ago, but nobody cared
     to cleanup the hackarounds"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  signal: Remove no longer required irqsave/restore
  rcu: Update documentation of rcu_read_unlock()
  objtool: Fix GCC 8 cold subfunction detection for aliased functions

Commit a841796f ("signal: align __lock_task_sighand() irq disabling and
RCU") introduced a rcu read side critical section with interrupts
disabled. The changelog suggested that a better long-term fix would be "to
make rt_mutex_unlock() disable irqs when acquiring the rt_mutex structure's
->wait_lock".

This long-term fix has been made in commit b4abf910 ("rtmutex: Make
wait_lock irq safe") for a different reason.

Therefore revert commit a841796f ("signal: align >
__lock_task_sighand() irq disabling and RCU") as the interrupt disable
dance is not longer required.

The change was tested on the base of b4abf910 ("rtmutex: Make wait_lock
irq safe") with a four hour run of rcutorture scenario TREE03 with lockdep
enabled as suggested by Paul McKenney.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: bigeasy@linutronix.de
Link: https://lkml.kernel.org/r/20180525090507.22248-3-anna-maria@linutronix.de

Since commit b4abf910 ("rtmutex: Make wait_lock irq safe") the
explanation in rcu_read_unlock() documentation about irq unsafe rtmutex
wait_lock is no longer valid.

Remove it to prevent kernel developers reading the documentation to rely on
it.
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: bigeasy@linutronix.de
Link: https://lkml.kernel.org/r/20180525090507.22248-2-anna-maria@linutronix.de

Merge proc_cmdline simplifications.

This re-writes the get_mm_cmdline() logic to be rather simpler than it
used to be, and makes the semantics for "cmdline goes past the end of
the original area" more natural.

You _can_ use prctl(PR_SET_MM) to just point your command line somewhere
else entirely, but the traditional model is to just edit things in place
and that still needs to continue to work.  At least this way the code
makes some sense.

* proc-cmdline:
  fs/proc: simplify and clarify get_mm_cmdline() function
  fs/proc: re-factor proc_pid_cmdline_read() a bit

Use the error code EUCLEAN for filesystem errors because other
filesystems use this code too.

[ And remove unused EMEMERROR  - Linus ]
Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull power supply and reset updates from Sebastian Reichel:
 - bq27xxx: Add BQ27426 support
 - ab8500: Drop AB8540/9540 support
 - Introduced new usb_type property
 - Properly document the power-supply ABI
 - misc. cleanups and fixes

* tag 'for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  MAINTAINERS: add entry for LEGO MINDSTORMS EV3
  power: supply: ab8500_charger: fix spelling mistake: "faile" -> "failed"
  power: supply: axp288_fuel_gauge: Remove polling from the driver
  power: supply: axp288_fuelguage: Do not bind when the fg function is not used
  power: supply: axp288_charger: Do not bind when the charge function is not used
  power: supply: axp288_charger: Support 3500 and 4000 mA input current limit
  power: supply: s3c-adc-battery: fix driver data initialization
  power: supply: charger-manager: Verify polling interval only when polling requested
  power: supply: sysfs: Use enum to specify property
  power: supply: ab8500: Drop AB8540/9540 support
  power: supply: ab8500_fg: fix spelling mistake: "Disharge" -> "Discharge"
  power: supply: simplify getting .drvdata
  power: supply: bq27xxx: Add support for BQ27426
  gpio-poweroff: Use gpiod_set_value_cansleep