- 01 May, 2019 12 commits
-
-
Vladimir Oltean authored
While possible (and safe) to use the newly introduced dsa_port_is_vlan_filtering helper, fabricating a dsa_port pointer is a bit awkward, so simply retrieve this from the dsa_switch structure. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Since DSA has recently learned to treat better with drivers that set vlan_filtering_is_global, doing this is no longer required. Signed-off-by:
-
Vladimir Oltean authored
Even if VLAN filtering is global, DSA will call this callback once per each port. Drivers should not have to compare the global state with the requested change. So let DSA do it. Signed-off-by:
-
Vladimir Oltean authored
This was recently introduced, so keeping state inside the driver is no longer necessary. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Since different types of hardware may or may not support this setting per-port, DSA keeps it either in dsa_switch or in dsa_port. While drivers may know the characteristics of their hardware and retrieve it from the correct place without the need of helpers, it is cumbersone to find out an unambigous answer from generic DSA code. Signed-off-by:
-
Vladimir Oltean authored
The current behavior is not as obvious as one would assume (which is that, if the driver set vlan_filtering_is_global = 1, then checking any dp->vlan_filtering would yield the same result). Only the ports which are actively enslaved into a bridge would have vlan_filtering set. This makes it tricky for drivers to check what the global state is. So fix this and make the struct dsa_switch hold this global setting. Signed-off-by:
-
Vladimir Oltean authored
The driver, recognizing that the .port_vlan_filtering callback was never coming after the port left its parent bridge, decided to take that duty in its own hands. DSA now takes care of this condition, so fix that. Signed-off-by:
-
Vladimir Oltean authored
When ports are standalone (after they left the bridge), they should have no VLAN filtering semantics (they should pass all traffic to the CPU). Currently this is not true for switchdev drivers, because the bridge "forgets" to unset that. Normally one would think that doing this at the bridge layer would be a better idea, i.e. call br_vlan_filter_toggle() from br_del_if(), similar to how nbp_vlan_init() is called from br_add_if(). However what complicates that approach, and makes this one preferable, is the fact that for the bridge core, vlan_filtering is a per-bridge setting, whereas for switchdev/DSA it is per-port. Also there are switches where the setting is per the entire device, and unsetting vlan_filtering one by one, for each leaving port, would not be possible from the bridge core without a certain level of awareness. So do this in DSA and let drivers be unaware of it. Signed-off-by:
-
Vladimir Oltean authored
The DSA core is now able to do this check prior to calling the .port_vlan_filtering callback, so tell it that VLAN filtering is global for this particular hardware. Signed-off-by:
-
Vladimir Oltean authored
On some switches, the action of whether to parse VLAN frame headers and use that information for ingress admission is configurable, but not per port. Such is the case for the Broadcom BCM53xx and the NXP SJA1105 families, for example. In that case, DSA can prevent the bridge core from trying to apply different VLAN filtering settings on net devices that belong to the same switch. Signed-off-by:
-
Vladimir Oltean authored
This allows drivers to query the VLAN setting imposed by the bridge driver directly from DSA, instead of keeping their own state based on the .port_vlan_filtering callback. Signed-off-by:
-
Vladimir Oltean authored
Signed-off-by:
-
- 30 Apr, 2019 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2019-04-30 1) A lot of work to remove indirections from the xfrm code. From Florian Westphal. 2) Support ESP offload in combination with gso partial. From Boris Pismenny. 3) Remove some duplicated code from vti4. From Jeremy Sowden. Please note that there is merge conflict between commit: 8742dc86 ("xfrm4: Fix uninitialized memory read in _decode_session4") from the ipsec tree and commit: c53ac41e ("xfrm: remove decode_session indirection from afinfo_policy") from the ipsec-next tree. The merge conflict will appear when those trees get merged during the merge window. The conflict can be solved as it is done in linux-next: https://lkml.org/lkml/2019/4/25/1207 Please pull or let me know if there are problems. ==================== Signed-off-by:
-
Antoine Tenart authored
The KSZ8081 PHY has a factory test mode which is set at the de-assertion of the reset line based on the RXER (KSZ8081RNA/RND) or TXC (KSZ8081MNX/RNB) pin. If a pull-down is missing, or if the pin has a pull-up, the factory test mode should be cleared by manually writing a 0 (according to the datasheet). This patch makes sure this factory test bit is cleared in config_init(). Tested-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by:
-
- 28 Apr, 2019 26 commits
-
-
Heiner Kallweit authored
Considering that in polling mode each link drop will be latched, settings can't have changed if link was up and is up. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== Make DSA tag drivers kernel modules Historically, DSA tag drivers have been compiled into the kernel as part of the DSA core. With the growing number of tag drivers, it makes sense to allow this driver code to be compiled as a module, and loaded on demand. v2 -- Move name to end of structure, keeping the hot entries at the beginning. More tag protocol to end of structure to keep hot members at the beginning. Fix indent of #endif Rewrite to move list pointer into a new structure void functions, since there cannot be errors Fix fall-through comment Reorder patch for unused symbols to before tag drivers can be modules tab/space cleanup Help text wording NET_DSA_TAG_BRCM_COMMON and NET_DSA_TAG_KZS_COMMON hidden v3 -- boilerplate: Move kdoc next to macro boilerplate: Fix THIS_MODULE indentation Kconfig: More tabification Kconfig: Punctuation v4 -- Cover note {H}istorically Kconfig: trailer ==================== Tested-by:Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Make the CONFIG symbols tristate and add help text. The broadcom and Microchip KSZ tag drivers support two different tagging protocols in one driver. Add a configuration option for the drivers, and then options to select the protocol. Create a submenu for the tagging drivers. Signed-off-by:
-
Andrew Lunn authored
It is possible that the driver is compiled with both CONFIG_NET_DSA_TAG_BRCM and CONFIG_NET_DSA_TAG_BRCM_PREPEND disabled. This results in warnings about unused symbols. Add some conditional compilation to avoid this. Signed-off-by:
-
Andrew Lunn authored
Now that tag drivers dynamically register, we don't need the static table. Remove it. This also means the tag driver structures can be made static. Signed-off-by:
-
Andrew Lunn authored
Implement the _get and _put functions to make use of the list of tag drivers. Also, trigger the loading of the module, based on the alias information. The _get function takes a reference on the tag driver, so it cannot be unloaded, and the _put function releases the reference. Signed-off-by:
-
Andrew Lunn authored
When a DSA switch driver is unloaded, the lock on the tag driver should be released so the module can be unloaded. Add the needed calls, but leave the actual release code as a stub. Signed-off-by:
-
Andrew Lunn authored
dsa_resolve_tag_protocol() is used to find the tagging driver needed by a switch driver. When the tagging drivers become modules, it will be necassary to take a reference on the module to prevent it being unloaded. So rename this function to _get() to indicate it has some locking properties. Signed-off-by:
-
Andrew Lunn authored
The none tagger is special in that it does not live in a tag_*.c file, but is within the core. Register/unregister when DSA is loaded/unloaded. Signed-off-by:
-
Andrew Lunn authored
Let the tag drivers register themselves with the DSA core, keeping them in a linked list. Signed-off-by:
-
Andrew Lunn authored
A DSA tag driver module will need to register the tag protocols it implements with the DSA core. Add macros containing this boiler plate. The registration/unregistration code is currently just a stub. A Later patch will add the real implementation. Signed-off-by:
-
Andrew Lunn authored
In order that we can match the tagging protocol a switch driver request to the tagger, we need to know what protocol the tagger supports. Add this information to the ops structure. Signed-off-by:
-
Andrew Lunn authored
All the tag drivers are some variant of GPL. Add a MODULE_LICENSE() indicating this, so the drivers can later be compiled as modules. Signed-off-by:
-
Andrew Lunn authored
When the tag drivers become modules, we will need to dynamically load them based on what the switch drivers need. Add aliases to map between the TAG protocol and the driver. In order to do this, we need the tag protocol number as something which the C pre-processor can stringinfy. Only the compiler knows the value of an enum, CPP cannot use them. So add #defines. Signed-off-by:
-
Andrew Lunn authored
Rather than keep a list to map a tagger ops to a name, place the name into the ops structure. This removes the hard coded list, a step towards making the taggers more dynamic. Signed-off-by:
-
Andrew Lunn authored
Add an SPDX header, and remove the license boilerplate text. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-28 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Introduce BPF socket local storage map so that BPF programs can store private data they associate with a socket (instead of e.g. separate hash table), from Martin. 2) Add support for bpftool to dump BTF types. This is done through a new `bpftool btf dump` sub-command, from Andrii. 3) Enable BPF-based flow dissector for skb-less eth_get_headlen() calls which was currently not supported since skb was used to lookup netns, from Stanislav. 4) Add an opt-in interface for tracepoints to expose a writable context for attached BPF programs, used here for NBD sockets, from Matt. 5) BPF xadd related arm64 JIT fixes and scalability improvements, from Daniel. 6) Change the skb->protocol for bpf_skb_adjust_room() helper in order to support tunnels such as sit. Add selftests as well, from Willem. 7) Various smaller misc fixes. ==================== Signed-off-by: -
Vishal Kulkarni authored
During driver unload, hash/TCAM filter deletion doesn't wait for completion.This patch deletes all the filters with completion before clearing the resources. Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
Andrew Lunn authored
Remove the legacy method of probing the mv88e6xxx driver, now that all the mainline boards have been converted to use mdio based probing for a number of cycles. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== mv88e6060 cleanups This patchset performs some cleanups of the mv88e6060 DSA driver, as a step towards making it an MDIO device, rather than use the old probing method. The changes here are all pretty mechanical and only compile tested. ==================== Signed-off-by: -
Andrew Lunn authored
The REG_READ macro contains a return statement, making it not very safe. Remove it by inlining the code. Signed-off-by:
-
Andrew Lunn authored
The REG_WRITE macro contains a return statement, making it not very safe. Remove it by inlining the code. Signed-off-by:
-
Andrew Lunn authored
Pass around priv, not ds. This will help with changing to an mdio driver, and makes this driver more like mv88e6xxx. Signed-off-by:
-
Andrew Lunn authored
Add an SPDX header, and remove the license text. Signed-off-by:
-
Murilo Fossa Vicentini authored
The ibmvnic driver currently uses the same fixed name when using request_irq, this makes it hard to parse when multiple VNIC devices are available at the same time. This patch adds the unit_address as the device identification along with an id for each queue. The original idea was to use the interface name as an identifier, but it is not feasible given these requests happen at adapter probe, and at this point netdev is not yet registered so it doesn't have the proper name assigned to it. Signed-off-by:
Murilo Fossa Vicentini <muvic@linux.ibm.com> Reviewed-by:
Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Reviewed-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
To fix the build. Signed-off-by:
-
