- 07 Dec, 2017 1 commit
-
-
Heiko Carstens authored
When wiring up the socket system calls the compat entries were incorrectly set. Not all of them point to the corresponding compat wrapper functions, which clear the upper 33 bits of user space pointers, like it is required. Fixes: 977108f8 ("s390: wire up separate socketcalls system calls") Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
- 05 Dec, 2017 9 commits
-
-
Heiko Carstens authored
Martin Cermak reported that setting a uprobe doesn't work. Reason for this is that the common uprobes code tries to get an unmapped area at the last possible page within an address space. This broke with commit 1aea9b3f ("s390/mm: implement 5 level pages tables") which introduced an off-by-one bug which prevents to map anything at the last possible page within an address space. The check with the off-by-one bug however can be removed since with commit 8ab867cb ("s390/mm: fix BUG_ON in crst_table_upgrade") the necessary check is done at both call sites. Reported-by: Martin Cermak <mcermak@redhat.com> Bisected-by: Thomas Richter <tmricht@linux.vnet.ibm.com> Fixes: 1aea9b3f ("s390/mm: implement 5 level pages tables") Cc: <stable@vger.kernel.org> # v4.13+ Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Martin Schwidefsky authored
More files under arch/s390 have been tagged with the SPDX identifier, a few of those files have a GPL license text. Remove the GPL text as it is no longer needed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Martin Schwidefsky authored
Add the correct SPDX license to a few more files under arch/s390 and drivers/s390 which have been missed to far. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Stefan Haberland authored
Prevent that a prefix flag is set based on invalid configuration data. The validity.verify_base flag should only be set for alias devices. Usually the unit address type is either one of base, PAV alias or HyperPAV alias. But in cases where the unit address type is not set or any other value the validity.verify_base flag might be set as well. This would lead to follow on errors. Explicitly check for alias devices and set the validity flag only for them. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
The switch_to() macro has an optimization to avoid saving and restoring register contents that aren't needed for kernel threads. There is however the possibility that a kernel thread execve's a user space program. In such a case the execve'd process can partially see the contents of the previous process, which shouldn't be allowed. To avoid this, simply always save and restore register contents on context switch. Cc: <stable@vger.kernel.org> # v2.6.37+ Fixes: fdb6d070 ("switch_to: dont restore/save access & fpu regs for kernel threads") Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Arnd Bergmann authored
getnstimeofday() and timespec are deprecated since they can overflow on 32-bit architectures. This simply changes to the explicitly typed timespec64 version that doesn't have that problem. It would be nice to also convert to monotonic timestamps and call ktime_get_ts64() rather than ktime_get_real_ts64(), but that would be a user-visible change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Julian Wiedmann authored
The 'no target buffer empty' error code only applies to HiperSockets. If this code is reported on a different queue type, be sure to make the same amount of noise as for any other error code. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Julian Wiedmann authored
In the unlikely case that an ERROR buffer (presented by the HW) consumed the last available slot on the input queue, increment the corresponding statistics counter. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Michael S. Tsirkin authored
The original intent of the virtio header relicensing from 2008 was to make sure anyone can implement compatible devices/drivers. The virtio-ccw was omitted by mistake. We have an ack from the only contributor as well as the maintainer from IBM, so it's not too late to fix that. Make it dual-licensed with GPLv2, as the whole kernel is GPL2. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
- 04 Dec, 2017 4 commits
-
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A handful of documentation fixes. The most significant of these addresses a problem with the new warning mode: it can break the build when confronted with a source file containing malformed kerneldoc comments" * tag 'docs-4.15-fixes' of git://git.lwn.net/linux: Documentation: fix docs build error after source file removed scsi: documentation: Fix case of 'scsi_device' struct mention(s) genericirq.rst: Remove :c:func:`...` in code blocks dmaengine: doc : Fix warning "Title underline too short" while make xmldocs scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio fixes from Michael Tsirkin: "virtio and qemu bugfixes A couple of bugfixes that just became ready" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: fix increment of vb->num_pfns in fill_balloon() virtio: release virtio index when fail to device_register fw_cfg: fix driver remove
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various TCP control block fixes, including one that crashes with SELinux, from David Ahern and Eric Dumazet. 2) Fix ACK generation in rxrpc, from David Howells. 3) ipvlan doesn't set the mark properly in the ipv4 route lookup key, from Gao Feng. 4) SIT configuration doesn't take on the frag_off ipv4 field configuration properly, fix from Hangbin Liu. 5) TSO can fail after device down/up on stmmac, fix from Lars Persson. 6) Various bpftool fixes (mostly in JSON handling) from Quentin Monnet. 7) Various SKB leak fixes in vhost/tun/tap (mostly observed as performance problems). From Wei Xu. 8) mvpps's TX descriptors were not zero initialized, from Yan Markman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match() tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb() rxrpc: Fix the MAINTAINERS record rxrpc: Use correct netns source in rxrpc_release_sock() liquidio: fix incorrect indentation of assignment statement stmmac: reset last TSO segment size after device open ipvlan: Add the skb->mark as flow4's member to lookup route s390/qeth: build max size GSO skbs on L2 devices s390/qeth: fix GSO throughput regression s390/qeth: fix thinko in IPv4 multicast address tracking tap: free skb if flags error tun: free skb in early errors vhost: fix skb leak in handle_rx() bnxt_en: Fix a variable scoping in bnxt_hwrm_do_send_msg() bnxt_en: fix dst/src fid for vxlan encap/decap actions bnxt_en: wildcard smac while creating tunnel decap filter bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown phylink: ensure we take the link down when phylink_stop() is called sfp: warn about modules requiring address change sequence sfp: improve RX_LOS handling ...
-
Chris Metcalf authored
The chip family of TILEPro and TILE-Gx was developed by Tilera, which was eventually acquired by Mellanox. The tile architecture was added to the kernel in 2010 and first appeared in 2.6.36. Now at Mellanox we are developing new chips based on the ARM64 architecture; our last TILE-Gx chip (the Gx72) was released in 2013, and our customers using tile architecture products are not, as far as we know, looking to upgrade to newer kernel releases. In the absence of someone in the community stepping up to take over maintainership, this commit marks the architecture as orphaned. Cc: Chris Metcalf <metcalf@alum.mit.edu> Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 03 Dec, 2017 26 commits
-
-
Randy Dunlap authored
The pci/htirq.c file was removed so remove it from the documentation file also. Error: Cannot open file ../drivers/pci/htirq.c WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -export ../drivers/pci/htirq.c' failed with return code 2 Fixes: fd2fa6c1 ("x86/PCI: Remove unused HyperTransport interrupt support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2017-12-02 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a compilation warning in xdp redirect tracepoint due to missing bpf.h include that pulls in struct bpf_map, from Xie. 2) Limit the maximum number of attachable BPF progs for a given perf event as long as uabi is not frozen yet. The hard upper limit is now 64 and therefore the same as with BPF multi-prog for cgroups. Also add related error checking for the sample BPF loader when enabling and attaching to the perf event, from Yonghong. 3) Specifically set the RLIMIT_MEMLOCK for the test_verifier_log case, so that the test case can always pass and not fail in some environments due to too low default limit, also from Yonghong. 4) Fix up a missing license header comment for kernel/bpf/offload.c, from Jakub. 5) Several fixes for bpftool, among others a crash on incorrect arguments when json output is used, error message handling fixes on unknown options and proper destruction of json writer for some exit cases, all from Quentin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb() James Morris reported kernel stack corruption bug that we tracked back to commit 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") First patch needs to be backported to kernels >= 3.18, while second patch needs to be backported to kernels >= 4.9, since this was the time when inet_exact_dif_match appeared. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
After this fix : ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()"), socket lookups happen while skb->cb[] has not been mangled yet by TCP. Fixes: a04a480d ("net: Require exact match for TCP socket lookups if dif is l3mdev") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
James Morris reported kernel stack corruption bug [1] while running the SELinux testsuite, and bisected to a recent commit bffa72cf ("net: sk_buff rbnode reorg") We believe this commit is fine, but exposes an older bug. SELinux code runs from tcp_filter() and might send an ICMP, expecting IP options to be found in skb->cb[] using regular IPCB placement. We need to defer TCP mangling of skb->cb[] after tcp_filter() calls. This patch adds tcp_v4_fill_cb()/tcp_v4_restore_cb() in a very similar way we added them for IPv6. [1] [ 339.806024] SELinux: failure in selinux_parse_skb(), unable to parse packet [ 339.822505] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81745af5 [ 339.822505] [ 339.852250] CPU: 4 PID: 3642 Comm: client Not tainted 4.15.0-rc1-test #15 [ 339.868498] Hardware name: LENOVO 10FGS0VA1L/30BC, BIOS FWKT68A 01/19/2017 [ 339.885060] Call Trace: [ 339.896875] <IRQ> [ 339.908103] dump_stack+0x63/0x87 [ 339.920645] panic+0xe8/0x248 [ 339.932668] ? ip_push_pending_frames+0x33/0x40 [ 339.946328] ? icmp_send+0x525/0x530 [ 339.958861] ? kfree_skbmem+0x60/0x70 [ 339.971431] __stack_chk_fail+0x1b/0x20 [ 339.984049] icmp_send+0x525/0x530 [ 339.996205] ? netlbl_skbuff_err+0x36/0x40 [ 340.008997] ? selinux_netlbl_err+0x11/0x20 [ 340.021816] ? selinux_socket_sock_rcv_skb+0x211/0x230 [ 340.035529] ? security_sock_rcv_skb+0x3b/0x50 [ 340.048471] ? sk_filter_trim_cap+0x44/0x1c0 [ 340.061246] ? tcp_v4_inbound_md5_hash+0x69/0x1b0 [ 340.074562] ? tcp_filter+0x2c/0x40 [ 340.086400] ? tcp_v4_rcv+0x820/0xa20 [ 340.098329] ? ip_local_deliver_finish+0x71/0x1a0 [ 340.111279] ? ip_local_deliver+0x6f/0xe0 [ 340.123535] ? ip_rcv_finish+0x3a0/0x3a0 [ 340.135523] ? ip_rcv_finish+0xdb/0x3a0 [ 340.147442] ? ip_rcv+0x27c/0x3c0 [ 340.158668] ? inet_del_offload+0x40/0x40 [ 340.170580] ? __netif_receive_skb_core+0x4ac/0x900 [ 340.183285] ? rcu_accelerate_cbs+0x5b/0x80 [ 340.195282] ? __netif_receive_skb+0x18/0x60 [ 340.207288] ? process_backlog+0x95/0x140 [ 340.218948] ? net_rx_action+0x26c/0x3b0 [ 340.230416] ? __do_softirq+0xc9/0x26a [ 340.241625] ? do_softirq_own_stack+0x2a/0x40 [ 340.253368] </IRQ> [ 340.262673] ? do_softirq+0x50/0x60 [ 340.273450] ? __local_bh_enable_ip+0x57/0x60 [ 340.285045] ? ip_finish_output2+0x175/0x350 [ 340.296403] ? ip_finish_output+0x127/0x1d0 [ 340.307665] ? nf_hook_slow+0x3c/0xb0 [ 340.318230] ? ip_output+0x72/0xe0 [ 340.328524] ? ip_fragment.constprop.54+0x80/0x80 [ 340.340070] ? ip_local_out+0x35/0x40 [ 340.350497] ? ip_queue_xmit+0x15c/0x3f0 [ 340.361060] ? __kmalloc_reserve.isra.40+0x31/0x90 [ 340.372484] ? __skb_clone+0x2e/0x130 [ 340.382633] ? tcp_transmit_skb+0x558/0xa10 [ 340.393262] ? tcp_connect+0x938/0xad0 [ 340.403370] ? ktime_get_with_offset+0x4c/0xb0 [ 340.414206] ? tcp_v4_connect+0x457/0x4e0 [ 340.424471] ? __inet_stream_connect+0xb3/0x300 [ 340.435195] ? inet_stream_connect+0x3b/0x60 [ 340.445607] ? SYSC_connect+0xd9/0x110 [ 340.455455] ? __audit_syscall_entry+0xaf/0x100 [ 340.466112] ? syscall_trace_enter+0x1d0/0x2b0 [ 340.476636] ? __audit_syscall_exit+0x209/0x290 [ 340.487151] ? SyS_connect+0xe/0x10 [ 340.496453] ? do_syscall_64+0x67/0x1b0 [ 340.506078] ? entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: James Morris <james.l.morris@oracle.com> Tested-by: James Morris <james.l.morris@oracle.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just one fix this time around, for the late commit in the merge window that triggered a problem with qemu. Qemu is apparently also going to receive a fix for the discovered issue" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: avoid faulting on qemu
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Here are two bugfixes for I2C, fixing a memleak in the core and irq allocation for i801. Also three bugfixes for the at24 eeprom driver which Bartosz collected while taking over maintainership for this driver" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: eeprom: at24: check at24_read/write arguments eeprom: at24: fix reading from 24MAC402/24MAC602 eeprom: at24: correctly set the size for at24mac402 i2c: i2c-boardinfo: fix memory leaks on devinfo i2c: i801: Fix Failed to allocate irq -2147483648 error
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fixes: - Drop reference to obsolete maintainer tree - Fix overflow bug in pmbus driver - Fix SMBUS timeout problem in jc42 driver For the SMBUS timeout handling, we had a brief discussion if this should be considered a bug fix or a feature. Peter says "it fixes real problems where the application misbehave due to faulty content when reading from an eeprom", and he needs the patch in his company's v4.14 images. This is good enough for me and warrants backport to stable kernels" * tag 'hwmon-for-linus-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jc42) optionally try to disable the SMBUS timeout hwmon: (pmbus) Use 64bit math for DIRECT format values hwmon: Drop reference to Jean's tree
-
David Howells authored
Fix the MAINTAINERS record so that it's more obvious who the maintainer for AF_RXRPC is. Reported-by: Joe Perches <joe@perches.com> Reported-by: David Miller <davem@davemloft.net> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
In rxrpc_release_sock() there may be no rx->local value to access, so we can't unconditionally follow it to the rxrpc network namespace information to poke the connection reapers. Instead, use the socket's namespace pointer to find the namespace. This unfixed code causes the following static checker warning: net/rxrpc/af_rxrpc.c:898 rxrpc_release_sock() error: we previously assumed 'rx->local' could be null (see line 887) Fixes: 3d18cbb7 ("rxrpc: Fix conn expiry timers") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Remove one extraneous level of indentation on assignment statement. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.15-20171201' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-12-01 this is a pull for net consisting of nine patches. The first three patches are by Jimmy Assarsson for the kvaser_usb driver and add the missing free()s in some error path, a signed/unsigned comparison and ratelimit the error messages in case of incomplete messages. Oliver Stäbler's patch for the ti_hecc driver fix the napi poll function's return value. The return values of the probe function of the peak_canfd and peak_pci PCI drivers are fixed by Stephane Grosjean's patch. Two patches by me for the flexcan driver update the bugs/features/quirks overview table and fix the error state transition for the VF610 SoC. The two patches by Martin Kelly for the mcba_usb driver fix a typo and a device disconnect bug. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wolfram Sang authored
Merge tag 'at24-4.15-fixes-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current Please consider pulling the following fixes for v4.15. While it doesn't fix any regression introduced in the v4.15 merge window, we have a feature in at24 since linux v4.8 - reading the mac address block from at24mac series - which turned out to be not working. This pull request contains changes that fix it together with a patch that hardens the read and write argument sanitization with out-of-bounds checks that were missing.
-
Lars Persson authored
The mss variable tracks the last max segment size sent to the TSO engine. We do not update the hardware as long as we receive skb:s with the same value in gso_size. During a network device down/up cycle (mapped to stmmac_release() and stmmac_open() callbacks) we issue a reset to the hardware and it forgets the setting for mss. However we did not zero out our mss variable so the next transmission of a gso packet happens with an undefined hardware setting. This triggers a hang in the TSO engine and eventuelly the netdev watchdog will bark. Fixes: f748be53 ("stmmac: support new GMAC4") Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gao Feng authored
Current codes don't use skb->mark to assign flowi4_mark, it would make the policy route rule with fwmark doesn't work as expected. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2017-12-01 please apply the following three fixes for 4.15. These should also go back to stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
The current GSO skb size limit was copy&pasted over from the L3 path, where it is needed due to a TSO limitation. As L2 devices don't offer TSO support (and thus all GSO skbs are segmented before they reach the driver), there's no reason to restrict the stack in how large it may build the GSO skbs. Fixes: d52aec97 ("qeth: enable scatter/gather in layer 2 mode") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Using GSO with small MTUs currently results in a substantial throughput regression - which is caused by how qeth needs to map non-linear skbs into its IO buffer elements: compared to a linear skb, each GSO-segmented skb effectively consumes twice as many buffer elements (ie two instead of one) due to the additional header-only part. This causes the Output Queue to be congested with low-utilized IO buffers. Fix this as follows: If the MSS is low enough so that a non-SG GSO segmentation produces order-0 skbs (currently ~3500 byte), opt out from NETIF_F_SG. This is where we anticipate the biggest savings, since an SG-enabled GSO segmentation produces skbs that always consume at least two buffer elements. Larger MSS values continue to get a SG-enabled GSO segmentation, since 1) the relative overhead of the additional header-only buffer element becomes less noticeable, and 2) the linearization overhead increases. With the throughput regression fixed, re-enable NETIF_F_SG by default to reap the significant CPU savings of GSO. Fixes: 5722963a ("qeth: do not turn on SG per default") Reported-by: Nils Hoppmann <niho@de.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Wiedmann authored
Commit 5f78e29c ("qeth: optimize IP handling in rx_mode callback") reworked how secondary addresses are managed for qeth devices. Instead of dropping & subsequently re-adding all addresses on every ndo_set_rx_mode() call, qeth now keeps track of the addresses that are currently registered with the HW. On a ndo_set_rx_mode(), we thus only need to do (de-)registration requests for the addresses that have actually changed. On L3 devices, the lookup for IPv4 Multicast addresses checks the wrong hashtable - and thus never finds a match. As a result, we first delete *all* such addresses, and then re-add them again. So each set_rx_mode() causes a short period where the IPv4 Multicast addresses are not registered, and the card stops forwarding inbound traffic for them. Fix this by setting the ->is_multicast flag on the lookup object, thus enabling qeth_l3_ip_from_hash() to search the correct hashtable and find a match there. Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Wei Xu says: ==================== vhost: fix a few skb leaks Matthew found a roughly 40% tcp throughput regression with commit c67df11f(vhost_net: try batch dequing from skb array) as discussed in the following thread: https://www.mail-archive.com/netdev@vger.kernel.org/msg187936.html v4: - fix zero iov iterator count in tap/tap_do_read()(Jason) - don't put tun in case of EBADFD(Jason) - Replace msg->msg_control with new 'skb' when calling tun/tap_do_read() v3: - move freeing skb from vhost to tun/tap recvmsg() to not confuse the callers. v2: - add Matthew as the reporter, thanks matthew. - moving zero headcount check ahead instead of defer consuming skb due to jason and mst's comment. - add freeing skb in favor of recvmsg() fails. ==================== Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Xu authored
tap_recvmsg() supports accepting skb by msg_control after commit 3b4ba04a ("tap: support receiving skb from msg_control"), the skb if presented should be freed within the function, otherwise it would be leaked. Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Xu authored
tun_recvmsg() supports accepting skb by msg_control after commit ac77cfd4 ("tun: support receiving skb through msg_control"), the skb if presented should be freed no matter how far it can go along, otherwise it would be leaked. This patch fixes several missed cases. Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Xu authored
Matthew found a roughly 40% tcp throughput regression with commit c67df11f(vhost_net: try batch dequing from skb array) as discussed in the following thread: https://www.mail-archive.com/netdev@vger.kernel.org/msg187936.html Eventually we figured out that it was a skb leak in handle_rx() when sending packets to the VM. This usually happens when a guest can not drain out vq as fast as vhost fills in, afterwards it sets off the traffic jam and leaks skb(s) which occurs as no headcount to send on the vq from vhost side. This can be avoided by making sure we have got enough headcount before actually consuming a skb from the batched rx array while transmitting, which is simply done by moving checking the zero headcount a bit ahead. Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Fixes. A shutdown fix for SMARTNIC, 2 fixes related to TC Flower vxlan filters, and the last one fixes an out-of-scope variable when sending short firmware messages. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
short_input variable is assigned to another data pointer which is referred out of its scope. Fix it by moving short_input definition to the beginning of bnxt_hwrm_do_send_msg() function. No failure has been reported so far due to this issue. Fixes: e605db80 ("bnxt_en: Support for Short Firmware Message") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-