This patch simplifies the boilerplate license text by making use of a
SPDX license identifier line.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds high-level documentation about the Generic Counter
interface.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds standard documentation for the userspace sysfs
attributes of the Generic Counter interface.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch introduces the Generic Counter interface for supporting
counter devices.

In the context of the Generic Counter interface, a counter is defined as
a device that reports one or more "counts" based on the state changes of
one or more "signals" as evaluated by a defined "count function."

Driver callbacks should be provided to communicate with the device: to
read and write various Signals and Counts, and to set and get the
"action mode" and "count function" for various Synapses and Counts
respectively.

To support a counter device, a driver must first allocate the available
Counter Signals via counter_signal structures. These Signals should
be stored as an array and set to the signals array member of an
allocated counter_device structure before the Counter is registered to
the system.

Counter Counts may be allocated via counter_count structures, and
respective Counter Signal associations (Synapses) made via
counter_synapse structures. Associated counter_synapse structures are
stored as an array and set to the the synapses array member of the
respective counter_count structure. These counter_count structures are
set to the counts array member of an allocated counter_device structure
before the Counter is registered to the system.

A counter device is registered to the system by passing the respective
initialized counter_device structure to the counter_register function;
similarly, the counter_unregister function unregisters the respective
Counter. The devm_counter_register and devm_counter_unregister functions
serve as device memory-managed versions of the counter_register and
counter_unregister functions respectively.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add Daktronics DMA driver.  I've added the SPDX license identifiers, Kconfig
entry, and cleaned up as many of the warnings as I could.

The AIO support code will be removed in a future patch.
Signed-off-by: Matt Sickler <matt.sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary variable from the function and make a corresponding
change w.r.t the variable. In addition to that align the parameters in
the parentheses to maintain Linux kernel coding style

Issue suggested by Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parentheses to improve readability.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add spaces around '-' to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace subtraction with the result to improve readability and
clear missing spaces around '-' checkpatch issues.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add spaces around '+', '-' and '|' to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit eliminate all uses of legacy integer base GPIO API in
olpc_dcon_xo_1_5.c and replace them with new descriptor GPIO API like
those in olpc_dcon_xo_1.c.

Also pull some common code with olpc_dcon_xo_1.c to olpc_dcon.h for code
sharing.
Signed-off-by: Jerry Lin <wahahab11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup indenting issue reported by checkpatch.
WARNING: suspect code indent for conditional statements (8, 17)
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pointers should be printed with %p or %px rather than
cast to unsigned long type and printed with %lx.
Change %lx to %pK to print the pointers.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The strcpy() function is being deprecated. Replace it by the safer
strscpy() and fix the following Coverity warning:

"You might overrun the 80-character fixed-size string iface->p->name
by copying iface->description without checking the length."

Addresses-Coverity-ID: 1444760 ("Copy into fixed size buffer")
Fixes: 131ac622 ("staging: most: core: use device description as name")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clang warns:

drivers/staging/kpc2000/kpc2000/cell_probe.c:96:38: warning: suggest
braces around initialization of subobject [-Wmissing-braces]
    struct resource  resources[2] = {0};
                                     ^
                                     {}
drivers/staging/kpc2000/kpc2000/cell_probe.c:314:38: warning: suggest
braces around initialization of subobject [-Wmissing-braces]
    struct resource  resources[2] = {0};
                                     ^
                                     {}
2 warnings generated.

One way to fix these warnings is to add additional braces like Clang
suggests; however, there has been a bit of push back from some
maintainers, who just prefer memset as it is unambiguous, doesn't
depend on a particular compiler version, and properly initializes all
subobjects [1][2]. Do that here so there are no more warnings.

[1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/
[2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/

Link: https://github.com/ClangBuiltLinux/linux/issues/455Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanup for the 5.2 cycle.

New device suport
* ad7606
  - Support the AD7616 16 channel, 12bit ADC.
* fxas21002c
  - New driver for this gyroscope with I2C and SPI support.
* lsm6dsx
  - Support the lsm6dsr, new device information structure and dt bindings.
* srf04
  - Addition device IDs for mb1000, mb1010, mb1020, mb1030 and mb1040 +
    support of different required trigger pulse lengths.
* st-accel
  - Support the ls2de12, new device info and dt bindings.
* ti-ads8344
  - New driver for this 8 channel, 16 bit SPI ADC.

Binding conversions to yaml - we have started doing these in general for IIO.
* avia-hx711
* bmp085

Cleanups and minor fixes / additions
* ad5758
  - Fixup for some changes between preproduction parts and final part.
* ad7606
  - Refactor handling of oversampling to make it easy to vary between
    supported devices.
* ad9832
  - Organise includes.
  - Clock framework to handle clocks.
* ad9834
  - Drop unnecessary parenthesis.
* bmc150
  - Use __func__ rather than hardcoding.
* dummy_evgen.
  - Fix a memleak on error in probe.
* kxcjk1013
  - Add KXCJ91008 ACPI ID as seen in the wild.
  - Use __func__ rather than hardcoding.
* imx7d
  - Local dev variable to simplify code a bit.
  - dev_err replaces pr_err to give more info.
  - devm_platform_ioremap_resource for small reduction in boilerplate.
  - Simplify probe and remove by sharing suspend / resume logic.
  - Devm for iio_device_register as remove only contains the unregister.
* lsm6dsx
  - Remove a variable that was never read.
  - Open code values where they are effectively described by what is assigned
    to them rather than using uninformative defines.
* max31856
  - Avoid an unintialized ret variable in a path that can't actually occur
    but is hard for a static checker to know.
* max9611
  - White space
* mpu3050
  - Reduce a sleep worst case by switching from msleep to usleep_range.
* qcom-spmi-adc5
  - Add MODULE_DEVICE_TABLE to assist autoloading of this as a module.
* stm32-dfsdm
  - Fix missing dependencies.
* stm32-timer trigger
  - Fix a build issue when disabled.
* ti-ads7950
  - Fix mising dependency on CONFIG_GPIOLIB.

* tag 'iio-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits)
  iio: adc: qcom-spmi-adc5: Fix of-based module autoloading
  iio: dummy_evgen: fix possible memleak in evgen init
  iio:accel:Switch hardcoded function name with a reference to __func__ making the code more maintainable
  iio: adc: stm32-dfsdm: fix triggered buffer build dependency
  iio: adc: stm32-dfsdm: fix unmet direct dependencies detected
  iio: trigger: stm32-timer: fix build issue when disabled
  iio: imx7d_adc: Use devm_iio_device_register()
  iio: imx7d_adc: Simplify imx7d_adc_remove() with imx7d_adc_suspend()
  iio: imx7d_adc: Simplify imx7d_adc_probe() with imx7d_adc_resume()
  drivers/iio/gyro/mpu3050-core.c: This patch fix the following checkpatch warning.
  iio: dac: ad5758: Modifications for new revision
  iio: imu: st_lsm6dsx: inline per-sensor data
  iio: adc: Add driver for the TI ADS8344 A/DC chips
  dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips
  MAINTAINERS: add entry for fxas21002c gyro driver
  iio: gyro: fxas21002c: add spi driver
  iio: gyro: fxas21002c: add i2c driver
  iio: gyro: add core driver for fxas21002c
  iio: gyro: add DT bindings to fxas21002c
  Kconfig: change configuration of srf04 ultrasonic iio sensor
  ...

The of_device_id table needs to be registered as module alias in order
for automatic module loading to pick the kernel module based on the
DeviceTree compatible. So add MODULE_DEVICE_TABLE() to make this happen.

Fixes: e13d7572 ("iio: adc: Add QCOM SPMI PMIC5 ADC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The memory allocated in the function iio_dummy_evgen_create is not
released if it fails to add the evgen device to device hierarchy. This
may result in a memory leak bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio:accel:Switch hardcoded function name with a reference to __func__ making the code more maintainable

It fixes the following checkpatch.pl warning:

WARNING: Prefer using '"%s...", __func__' to using function's name, in a
string
Signed-off-by: Mohan Kumar <mohankumar718@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This fixes build errors seen when CONFIG_STM32_DFSDM_ADC is set, as
stm32-dfsdm-adc driver now also relies on triggered buffer API:

Fixes: 11646e81 ("iio: adc: stm32-dfsdm: add support for buffer modes")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This fixes unmet direct dependencies seen when CONFIG_STM32_DFSDM_ADC
is selected:

WARNING: unmet direct dependencies detected for IIO_BUFFER_HW_CONSUMER
  Depends on [n]: IIO [=y] && IIO_BUFFER [=n]
  Selected by [y]:
  - STM32_DFSDM_ADC [=y] && IIO [=y] && (ARCH_STM32 [=y] && OF [=y] ||
    COMPILE_TEST [=n])

Fixes: e2e6771c ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This fixes a build issue when CONFIG_IIO_STM32_TIMER_TRIGGER isn't set but
used in stm32-dfsdm-adc driver (e.g. CONFIG_STM32_DFSDM_ADC is set):
ERROR: "is_stm32_timer_trigger" [drivers/iio/adc/stm32-dfsdm-adc.ko]
undefined!

There are two possible options to fix this issue:
- select IIO_STM32_TIMER_TRIGGER along with CONFIG_STM32_DFSDM_ADC.
  This is what's being done currently for CONFIG_STM32_ADC.
- stub "is_stm32_timer_trigger" function

Choice is made to stub this function as suggested in [1]. This is also
inspired by similar "is_stm32_lptim_trigger" function (see [2]) in
include/linux/iio/timer/stm32-lptim-trigger.h

[1]
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1977377.html
[2] https://lkml.org/lkml/2017/9/10/124

Fixes: 11646e81 ("iio: adc: stm32-dfsdm: add support for buffer modes")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fix-suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Use devm_iio_device_register() and drop imx7d_adc_remove().
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Since imx7d_adc_remove() does exactly the same thing as
imx7d_adc_suspend() we can use the latter together with
devm_add_action_or_reset() to simplify the former. Rename
imx7d_adc_suspend() to imx7d_adc_disable() for clarity while at it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Initialization sequence performed in imx7d_adc_resume() is exactly the
same as the one being done in imx7d_adc_probe(). Make use of the
former in the latter to avoid code duplication. Rename
imx7d_adc_resume() to imx7d_adc_enable() for clarity while at it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

As per Documentation/timers/timers-howto.txt Msleep < 20ms can sleep for
up to 20ms. so use usleep_range.
Signed-off-by: Mohan Kumar <mohankumar718@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This patch will ensure compatibility with the new revision of the AD5758
dac converter. The modifications consist of removing the fault_prot_switch
function since this option is no longer available, and enabling the
ENABLE_PPC_BUFFERS bit in ADC_CONFIG register before setting the PPC
current mode.

The previous version of the chip was never released to customers
so there is no need to support it going forwards.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

As it has been already done for other st sensors in 'commit 9049531c
("iio: accel: st_accel: inline per-sensor data")', get rid of some
defines and just open code the values into the appropriate struct
elements since the semantic meaning is inherent in the name of the
C99-addressable fields and there is no reason to duplicate the code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This adds support for the Texas Instruments ADS8344 ADC chip. This chip
has a 16-bit 8-Channel ADC and is access directly through SPI.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This adds device tree bindings for the TI ADS8344 A/DC chips.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add me as maintainer of the nxp fxas21002c gyroscope driver.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add driver to talk over spi to a fxas21002c gyroscope device and use
the core as main controller.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add the real driver to talk over i2c and use the fxas21002c core
for the main tasks.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add core support for the NXP fxas21002c Tri-axis gyroscope,
using the iio subsystem. It supports PM operations, axis reading,
temperature, scale factor of the axis, high pass and low pass
filtering, and sampling frequency selection.

It will have extras modules to support the communication over i2c and
spi.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

We want the fixes in here as well as this resolves an iio driver merge
issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These drivers have been outside of the kernel tree since the 2.x days,
and it's time to bring them into the tree so they can get properly
cleaned up.

This first dump of drivers is based on a tarball Matt gave to me, minus
an odd "dma" driver that I could not get to build at all.  I renamed a
few files, added the proper SPDX lines to it, added Kconfig entries and
tied it into the kernel build.  I also fixed up a number of initial
obvious kernel build warnings, but left the odd bitfield warning that
gcc is spitting out, as I'm not quite sure what to do about that.

There's loads of low-hanging coding style cleanups in here for people to
start attacking, as well as the more obvious logic and api cleanups as
well.

Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace return type and remove the respective assignment.

Issue found by Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>