- 23 Aug, 2019 15 commits
-
-
Ville Syrjälä authored
The "pipe" argument passed in by the vblank code is in fact the crtc index. Don't assume that is the same as the pipe. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-2-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
We may need to eliminate the crtc->index == pipe assumptions from the code to support arbitrary pipes being fused off. Start that by switching some bitmasks over to using pipe instead of the crtc index. Signed-off-by:
-
Stuart Summers authored
Currently, the subslice_mask runtime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through the I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is then calculated: slice * subslice stride + subslice index / 8 v2: Fix 32-bit build v3: Use new helper function in SSEU workaround warning message v4: Use GEM_BUG_ON to force developers to use valid SSEU configurations per platform (Chris) Signed-off-by:Stuart Summers <stuart.summers@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Stuart Summers authored
Add a new function to copy subslices for a specified slice between intel_sseu structures for the purpose of determining power-gate status. Note that currently ss_stride has a max of 1. Signed-off-by:
-
Stuart Summers authored
Refactor instdone loops to use the new intel_sseu_has_subslice function. Signed-off-by:
-
Stuart Summers authored
Add a new function to determine whether a particular slice has a given subslice. Signed-off-by:
-
Stuart Summers authored
Add a subslice stride calculation when setting subslices. This aligns more closely with the userspace expectation of the subslice mask structure. v2: Use local variable for subslice_mask on HSW and clean up a few other subslice_mask local variable changes v3: Add GEM_BUG_ON for ss_stride to prevent array overflow (Chris) Split main set function and refactors in intel_device_info.c into separate patches (Chris) v4: Reduce ss_stride size check when setting subslices per slice based on actual expected max stride (Chris) Move that GEM_BUG_ON check for the ss_stride out to the patch which adds the ss_stride v5: Use memcpy instead of looping through each stride index Signed-off-by: -
Stuart Summers authored
Add a new function to set a set of subslices for a given slice. v2: Fix typo in subslice_mask assignment Signed-off-by:
-
Stuart Summers authored
When setting up subslice_mask, instead of operating on the slice array directly, use a local variable to start bits per slice, then use this to set the per slice array in one step. Signed-off-by:
-
Stuart Summers authored
Add a new SSEU runtime parameter, eu_stride, which is used to mirror the userspace concept of a range of EUs per subslice. This patch simply adds the parameter and updates usage in the QUERY_TOPOLOGY_INFO handler. v2: Add GEM_BUG_ON to make sure eu_stride is valid Signed-off-by:
-
Stuart Summers authored
Add a new parameter, ss_stride, to the runtime info structure. This is used to mirror the userspace concept of subslice stride, which is a range of subslices per slice. This patch simply adds the definition and updates usage in the QUERY_TOPOLOGY_INFO handler. v2: Add GEM_BUG_ON to make sure ss_stride is valid Signed-off-by:
-
Stuart Summers authored
Add a new function to allow each platform to set maximum slice, subslice, and EU information to reduce code duplication. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Stuart Summers authored
Use a local variable to find SSEU runtime information in various debugfs functions. v2: Remove extra line breaks per feedback from Chris Signed-off-by:
-
Michel Thierry authored
HCP/MFX power gating is disabled by default, turn it on for the vd units available. User space will also issue a MI_FORCE_WAKEUP properly to wake up proper subwell. During driver load, init_clock_gating happens after device_info_init_mmio read the vdbox disable fuse register, so only present vd units will have these enabled. BSpec: 14214 HSDES: 1209977827 Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Tony Ye <tony.ye@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-3-lucas.demarchi@intel.com
-
Michel Thierry authored
GAM registers located in the 0x4xxx range have been relocated to 0xCxxx; this is to make space for global MOCS registers. v2: Rename register and bitfield to its new name (suggested by Mika) HSD: 399379 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
- 22 Aug, 2019 14 commits
-
-
Manasi Navare authored
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use cpu_transcoder instead of encoder->type to select the correct DSC registers that was wrongly used in the original patch for one DSC register isntance. Fixes: 7182414e ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling") Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821215950.24223-1-manasi.d.navare@intel.com
-
Anusha Srivatsa authored
DSC engine on ICL supports only 8 and 10 BPC as the input BPC. But DSC engine in TGL supports 8, 10 and 12 BPC. Add 12 BPC support for DSC while calculating compression configuration. v2: Remove the separate define TGL_DP_DSC_MAX_SUPPORTED_BPC and use the value directly.(More such defines can be removed as part of future patches). (Ville) v3: Use values directly instead of accessing the defines everytime for min and max DSC BPC. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
-
José Roberto de Souza authored
No need to unmask PSR interrutpion if PSR is not enabled, better move the call to intel_psr_enable_source(). v2: Renamed intel_psr_irq_control() to psr_irq_control() (Lucas) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
José Roberto de Souza authored
According to PSR2_CTL definition in BSpec there is only one instance of PSR2_CTL. Platforms gen < 12 with EDP transcoder only support PSR2 on TRANSCODER_EDP while on TGL PSR2 is only supported by TRANSCODER_A. Since BDW PSR is allowed on any port, but we need to restrict by transcoder. v8: Renamed _psr2_supported_in_trans() to psr2_supported() (Lucas) v9: Renamed psr2_supported() to transcoder_has_psr2() (Ville) BSpec: 7713 BSpec: 20584 Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190820223325.27490-2-jose.souza@intel.com
-
José Roberto de Souza authored
PSR registers are a mess, some have the full address while others just have the additional offset from psr_mmio_base. For BDW+ psr_mmio_base is nothing more than TRANSCODER_EDP_OFFSET + 0x800 and using it makes more difficult for people with an PSR register address or PSR register name from from BSpec as i915 also don't match the BSpec names. For HSW psr_mmio_base is _DDI_BUF_CTL_A + 0x800 and PSR registers are only available in DDIA. Other reason to make relative to transcoder is that since BDW every transcoder have PSR registers, so in theory it should be possible to have PSR enabled in a non-eDP transcoder. So for BDW+ we can use _TRANS2() to get the register offset of any PSR register in any transcoder while for HSW we have _HSW_PSR_ADJ that will calculate the register offset for the single PSR instance, noting that we are already guarded about trying to enable PSR in other port than DDIA on HSW by the 'if (dig_port->base.port != PORT_A)' in intel_psr_compute_config(), this check should only be valid for HSW and will be changed in future. PSR2 registers and PSR_EVENT was added after Haswell so that is why _PSR_ADJ() is not used in some macros. The only registers that can not be relative to transcoder are PSR_IMR and PSR_IIR that are not relative to anything, so keeping it hardcoded. That changed for TGL but it will be handled in another patch. Also removing BDW_EDP_PSR_BASE from GVT because it is not used as it is the only PSR register that GVT have. v5: - Macros changed to be more explicit about HSW (Dhinakaran) - Squashed with the patch that added the tran parameter to the macros (Dhinakaran) v6: - Checking for interruption errors after module reload in the transcoder that will be used (Dhinakaran) - Using lowercase to the registers offsets v7: - Removing IS_HASWELL() from registers macros(Jani) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Chris Wilson authored
You have to cut it off at the neck, otherwise it just reappears in the next merge, like it did in commit 3f866026f0ce ("Merge drm/drm-next into drm-intel-next-queued") References: 3f866026f0ce ("Merge drm/drm-next into drm-intel-next-queued") Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190822065917.18988-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Avoid calling i915_vma_put_fence() by using our alternate paths that bind a secondary vma avoiding the original fenced vma. For the few instances where we need to release the fence (i.e. on binding when the GGTT range becomes invalid), replace the put_fence with a revoke_fence. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190822061557.18402-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since we want to revoke the ggtt vma from only under the ggtt->mutex, we need to move protection of the userfault tracking from the struct_mutex to the ggtt->mutex. Signed-off-by:
-
Chris Wilson authored
We can reduce the locking for fence registers from the dev->struct_mutex to a local mutex. We could introduce a mutex for the sole purpose of tracking the fence acquisition, except there is a little bit of overlap with the fault tracking, so use the i915_ggtt.mutex as it covers both. Signed-off-by:
-
Chris Wilson authored
Extract the dma-fence worker used by clflush for wider use, as we anticipate using workers coupled to dma-fences more frequently. Signed-off-by:
-
Rodrigo Vivi authored
We need the rename of reservation_object to dma_resv. The solution on this merge came from linux-next: From: Stephen Rothwell <sfr@canb.auug.org.au> Date: Wed, 14 Aug 2019 12:48:39 +1000 Subject: [PATCH] drm: fix up fallout from "dma-buf: rename reservation_object to dma_resv" Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> --- drivers/gpu/drm/i915/gt/intel_engine_pool.c | 8 ++++---- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_engine_pool.c b/drivers/gpu/drm/i915/gt/intel_engine_pool.c index 03d90b49584a..4cd54c569911 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_pool.c +++ b/drivers/gpu/drm/i915/gt/intel_engine_pool.c @@ -43,12 +43,12 @@ static int pool_active(struct i915_active *ref) { struct intel_engine_pool_node *node = container_of(ref, typeof(*node), active); - struct reservation_object *resv = node->obj->base.resv; + struct dma_resv *resv = node->obj->base.resv; int err; - if (reservation_object_trylock(resv)) { - reservation_object_add_excl_fence(resv, NULL); - reservation_object_unlock(resv); + if (dma_resv_trylock(resv)) { + dma_resv_add_excl_fence(resv, NULL); + dma_resv_unlock(resv); } err = i915_gem_object_pin_pages(node->obj); which is a simplified version from a previous one which had: Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
Most importantly per-process address spaces on GPUs that are capable of providing proper isolation has finished baking. This is the base for our softpin implementation, which allows us to support the texture descriptor buffers used by GC7000 series GPUs without a major UAPI extension/rework. Shortlog of notable changes: - code cleanup from Fabio - fix performance counters on GC880 and GC2000 GPUs from Christian - drmP.h header removal from Sam - per process address space support on MMUv2 GPUs from me - softpin support from me Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1565946875.2641.73.camel@pengutronix.de
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
- R-Car DU fixes - Misc. DRM cleanups Signed-off-by:
-
- 21 Aug, 2019 11 commits
-
-
Chris Wilson authored
In commit 70d6894d ("drm/i915: Serialize against vma moves") I managed to miss a couple of i915_vma_move_to_active() that had not serialised against an async vma pinning. Add the missing i915_request_await. Signed-off-by:
-
Xiong Zhang authored
The following call trace may exist in linux guest dmesg when guest i915 driver is unloaded. [ 90.776610] [drm:vgt_deballoon_space.isra.0 [i915]] deballoon space: range [0x0 - 0x0] 0 KiB. [ 90.776621] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 [ 90.776691] IP: drm_mm_remove_node+0x4d/0x320 [drm] [ 90.776718] PGD 800000012c7d0067 P4D 800000012c7d0067 PUD 138e4c067 PMD 0 [ 90.777091] task: ffff9adab60f2f00 task.stack: ffffaf39c0fe0000 [ 90.777142] RIP: 0010:drm_mm_remove_node+0x4d/0x320 [drm] [ 90.777573] Call Trace: [ 90.777653] intel_vgt_deballoon+0x4c/0x60 [i915] [ 90.777729] i915_ggtt_cleanup_hw+0x121/0x190 [i915] [ 90.777792] i915_driver_unload+0x145/0x180 [i915] [ 90.777856] i915_pci_remove+0x15/0x20 [i915] [ 90.777890] pci_device_remove+0x3b/0xc0 [ 90.777916] device_release_driver_internal+0x157/0x220 [ 90.777945] driver_detach+0x39/0x70 [ 90.777967] bus_remove_driver+0x51/0xd0 [ 90.777990] pci_unregister_driver+0x23/0x90 [ 90.778019] SyS_delete_module+0x1da/0x240 [ 90.778045] entry_SYSCALL_64_fastpath+0x24/0x87 [ 90.778072] RIP: 0033:0x7f34312af067 [ 90.778092] RSP: 002b:00007ffdea3da0d8 EFLAGS: 00000206 [ 90.778297] RIP: drm_mm_remove_node+0x4d/0x320 [drm] RSP: ffffaf39c0fe3dc0 [ 90.778344] ---[ end trace f4b1bc8305fc59dd ]--- Four drm_mm_node are used to reserve guest ggtt space, but some of them may be skipped and not initialised due to space constraints in intel_vgt_balloon(). If drm_mm_remove_node() is called with uninitialized drm_mm_node, the above call trace occurs. This patch check drm_mm_node's validity before calling drm_mm_remove_node(). Fixes: ff8f7975("drm/i915: return the correct usable aperture size under gvt environment") Cc: stable@vger.kernel.org Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> Acked-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
These should have been validated in the upper layers, but for sanity's sake, repeat them. Signed-off-by:
-
Ville Syrjälä authored
We're not allowed to create new properties after device registration so for MST connectors we need to either create the max_bpc property earlier, or we reuse one we already have. Let's do the latter apporach since the corresponding SST connector already has the prop and its min/max are correct also for the MST connector. The problem was highlighted by commit 4f5368b5 ("drm/kms: Catch mode_object lifetime errors") which results in the following spew: [ 1330.878941] WARNING: CPU: 2 PID: 1554 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xa0/0xb0 [drm] ... [ 1330.879008] Call Trace: [ 1330.879023] drm_property_create+0xba/0x180 [drm] [ 1330.879036] drm_property_create_range+0x15/0x30 [drm] [ 1330.879048] drm_connector_attach_max_bpc_property+0x62/0x80 [drm] [ 1330.879086] intel_dp_add_mst_connector+0x11f/0x140 [i915] [ 1330.879094] drm_dp_add_port.isra.20+0x20b/0x440 [drm_kms_helper] ... Cc: stable@vger.kernel.org Cc: Lyude Paul <lyude@redhat.com> Cc: sunpeng.li@amd.com Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sean Paul <sean@poorly.run> Fixes: 5ca0ef8a ("drm/i915: Add max_bpc property for DP MST") Signed-off-by:
Lyude Paul <lyude@redhat.com>
-
Chris Wilson authored
Since we now run process_csb() outside of the engine->active.lock, we can process a CS-event immediately upon our ELSP write. As we currently inspect the pending queue *after* the ELSP write, there is an opportunity for a CS-event to update the pending queue before we can read it, making ourselves chases an invalid pointer. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111427 Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:
-
Chris Wilson authored
When under severe stress for GTT mappable space, the LRU eviction model falls off a cliff. We spend all our time scanning the much larger non-mappable area searching for something within the mappable zone we can evict. Turn this on its head by only using the full vma for the object if it is already pinned in the mappable zone or there is sufficient *free* space to accommodate it (prioritizing speedy reuse). If there is not, immediately fall back to using small chunks (tilerow for GTT mmap, single pages for pwrite/relocation) and using random eviction before doing a full search. Testcase: igt/gem_concurrent_blt References: https://bugs.freedesktop.org/show_bug.cgi?id=110848Signed-off-by:
-
Chris Wilson authored
We need asm/smp.h for wbinvd_on_all_cpus() Reported-by: kbuild-all@01.org Signed-off-by:
-
Jani Nikula authored
It's static const data, make it so. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
-
Jani Nikula authored
Split struct declaration and array definition. Fix indents and whitespace. No functional changes. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Jani Nikula authored
It's static const data, make it so. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Jani Nikula authored
Everything seems to be all right, but shadowing is to be avoided. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
