- 08 May, 2012 2 commits
-
-
Sylwester Nawrocki authored
When setting TRY crop on the sub-device the mutex was erroneously acquired rather than released on exit path. This bug is present in kernels starting from v3.2. Cc: stable@vger.kernel.org Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Changeset 5bfaadde broke zig-zag for DVB-S drivers that don't implement get_tune_settings() callback. Fix the code, in order to allow it to work as before, otherwise some channels may not be tuned anymore. Fix Fedora Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=814404 Cc: stable@kernel.org # for Kernel v3.3 Reported-by: Michael Heijenga <database.worker@googlemail.com> Tested-by: Michael Heijenga <database.worker@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 26 Apr, 2012 5 commits
-
-
Dan Carpenter authored
The current condition is always true, so everything uses LOGICAL_DEV_CIR_REV2 (8). It should be that Fintek products 0x0408(F71809) and 0x0804(F71855) use logical device LOGICAL_DEV_CIR_REV1 (5) and other chip ids use logical device 8. In other words, this fixes hardware detection for 0x0408 and 0x0804. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jarod Wilson <jarod@redhat.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
These controls have been marked for long time as V4L2_CID_HCENTER_DEPRECATED, V4L2_CID_VCENTER_DEPRECATED in the DocBook and are going to be removed from include/linux/videodev2.h. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Luis Henriques authored
An early registration of an ISR was causing a crash to several users (for example, with the ite-cir driver: http://bugs.launchpad.net/bugs/972723). The reason was that IRQs were being triggered before a driver initialisation was completed. This patch fixes this by moving the invocation to request_irq() and to request_region() to a later stage on the driver probe function. Cc: <stable@vger.kernel.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jonathan Corbet authored
One of the OLPC changes lost a little in its translation to mainline, leading to build errors on the ARM architecture. Remove the offending line, and all will be well. Reported-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
If multiple clients are registered on a single camera host interface, the user-space hot-plug software can try to access the one, that probed first, before probing of the second one has completed. This can be handled by individual host drivers, but it is even better to hold back the user-space until all the probing on this host has completed. This fixes a race on ecovec with two clients registered on the CEU1 host, which otherwise triggers a BUG() in sh_mobile_ceu_remove_device(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 Apr, 2012 4 commits
-
-
Michael Krufky authored
Rather than loading firmware specific for the xtal frequency, just use the standard firmware and set the xtal frequency after firmware upload. The modified firmware will never be released, so we're better off merging this now rather than waiting for v3.5. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
Fix the following compilation failure: linux-2.6/drivers/media/video/mt9m032.c: In function '__mt9m032_get_pad_crop': linux-2.6/drivers/media/video/mt9m032.c:337: error: implicit declaration of function 'v4l2_subdev_get_try_crop' linux-2.6/drivers/media/video/mt9m032.c:337: warning: return makes pointer from integer without a cast linux-2.6/drivers/media/video/mt9m032.c: In function '__mt9m032_get_pad_format': linux-2.6/drivers/media/video/mt9m032.c:359: error: implicit declaration of function 'v4l2_subdev_get_try_format' linux-2.6/drivers/media/video/mt9m032.c:359: warning: return makes pointer from integer without a cast linux-2.6/drivers/media/video/mt9m032.c: In function 'mt9m032_probe': linux-2.6/drivers/media/video/mt9m032.c:767: error: 'struct v4l2_subdev' has no member named 'entity' linux-2.6/drivers/media/video/mt9m032.c:826: error: 'struct v4l2_subdev' has no member named 'entity' linux-2.6/drivers/media/video/mt9m032.c: In function 'mt9m032_remove': linux-2.6/drivers/media/video/mt9m032.c:842: error: 'struct v4l2_subdev' has no member named 'entity' make[4]: *** [drivers/media/video/mt9m032.o] Error 1 by adding a dependency on VIDEO_V4L2_SUBDEV_API. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
Fix a copy-paste typo and a nested locking function call in mt9m032. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 18 Apr, 2012 3 commits
-
-
David Härdeman authored
Setting the correct mode is required by rc-core or scancodes won't be generated (which isn't very user-friendly). This one-line fix should be suitable for 3.4-rc2. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Alexey Khoroshilov authored
If sanity check fails in scu_command(), goto error leads to unlock of an unheld mutex. The check should not fail in reality, but it nevertheless worth fixing. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
There are some softwares (Kaffeine and likely xine) that uses a DVBv5 call to switch to DVB-S2, but expects that a DVBv3 call to switch back to DVB-S. Well, this is not right, as a DVBv3 call doesn't know anything about delivery systems. However, as, by accident, this used to work, we need to restore its behavior, in order to avoid regressions with those softwares. Reported on this Fedora 16 bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=812895Reported-by: Dieter Roever <Dieter.Roever@gmx.de> Cc: stable@kernel.org # for version 3.3 Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 09 Apr, 2012 6 commits
-
-
Laurent Pinchart authored
The driver frees the clock samples buffer before stopping the video buffers queue. If a DQBUF call arrives in-between, uvc_video_clock_update() will be called with a NULL clock samples buffer, leading to a crash. This occurs very frequently when using the webcam with the flash browser plugin. Move clock initialization/cleanup to uvc_video_enable() in order to free the clock samples buffer after the queue is stopped. Make sure the clock is reset at resume time to avoid miscalculating timestamps. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
On Sunday, April 01, 2012 21:09:34 Tracey Dent wrote: > radio-maxiradio depends on SND_FM801_TEA575X_BOOL to build or will > result in an build error such as: > > Kernel: arch/x86/boot/bzImage is ready (#1) > ERROR: "snd_tea575x_init" [drivers/media/radio/radio-maxiradio.ko] undefined! > ERROR: "snd_tea575x_exit" [drivers/media/radio/radio-maxiradio.ko] undefined! > WARNING: modpost: Found 6 section mismatch(es). > To see full details build your kernel with: > 'make CONFIG_DEBUG_SECTION_MISMATCH=y' > make[1]: *** [__modpost] Error 1 > make: *** [modules] Error 2 > > Select CONFIG_SND_TEA575X to fixes problem and enable > the driver to be built as desired. > > v2: > instead of selecting CONFIG_SND_FM801_TEA575X_BOOL, select > CONFIG_SND_TEA575X, which in turns selects CONFIG_SND_FM801_TEA575X_BOOL > and any other dependencies for it to build. No, this is the correct patch: RADIO_MAXIRADIO should be treated just like RADIO_SF16FMR2, I just didn't realize at the time that it had to be added as a SND_TEA575X dependency. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Shea Levy <shea@shealevy.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Petter Selasky authored
has_get_frontend() should return a boolean, not a pointer. Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Malcolm Priestley authored
On some systems the device does not respond or give obscure values after cold, warm or firmware reboot. This patch retries to get chip version and type 5 times. If it fails it applies chip version 0x1 and type 0x9135. This patch does not fix warm cycle problems from other operating systems and indeed the reverse applies. Users should power off cold boot. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
When I converted ivtv to the new decoder API I introduced a regression in the support of the old channel select API. Thanks to Martin Dauskardt for reporting this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Chris Rankin authored
The commit e399ce77 has broken the DVB ABI for xine: The problem is that xine is expecting every event after a successful FE_SET_FRONTEND ioctl to have a non-zero frequency parameter, regardless of whether the tuning process has LOCKed yet. What used to happen is that the events inherited the initial tuning parameters from the FE_SET_FRONTEND call. However, the fepriv->parameters_out struct is now not initialised until the status contains the FE_HAS_LOCK bit. You might argue that this behaviour is intentional, except that if an application other than xine uses the DVB adapter and manages to set the parameters_out.frequency field to something other than zero, then xine no longer has any problems until either the adapter is replugged or the kernel modules reloaded. This can only mean that the fepriv->parameters_out struct still contains the (stale) tuning information from the previous application. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Cc: stable@kernel.org # for kernel version 3.3 Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 23 Mar, 2012 1 commit
-
-
Mauro Carvalho Chehab authored
* staging/for_v3.4: (10117 commits) [media] update CARDLIST.em28xx [media] partially reverts changeset fa5527cd [media] stb0899: fix the limits for signal strength values [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e) [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e) [media] -EINVAL -> -ENOTTY [media] gspca - sn9c20x: Cleanup source [media] gspca - sn9c20x: Simplify register write for capture start/stop [media] gspca - sn9c20x: Add automatic JPEG compression mechanism [media] gspca - sn9c20x: Greater delay in case of sensor no response [media] gspca - sn9c20x: Optimize the code of write sequences [media] gspca - sn9c20x: Add the JPEG compression quality control [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset [media] gspca - sn9c20x: Propagate USB errors to higher level [media] gspca - sn9c20x: Use the new video control mechanism [media] gspca - sn9c20x: Fix loss of frame start [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5 ...
-
- 20 Mar, 2012 19 commits
-
-
Mauro Carvalho Chehab authored
Add the new DRX-K based devices there. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
This patch is applying some hunks that are already at changeset c247d7b1, causing a compilation breakage. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Klaus Schmidinger authored
stb0899: fix the limits for signal strength values stb0899_read_signal_strength() adds an offset to the result of the table lookup. That offset must correspond to the lowest value in the lookup table, to make sure the result doesn't get below 0, which would mean a "very high" value since the parameter is unsigned. 'strength' and 'snr' need to be initialized to 0 to make sure they have a defined result in case there is no "internal->lock". Signed-off-by: Klaus Schmidinger <Klaus.Schmidinger@tvdr.de> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Ivan Kalvachev authored
It is mostly copy/paste of the 520e code with setting GPIO7 removed (no LED light). I've worked on just released vanilla linux-3.3.0 kernel, so there may be 1/2 lines offset to the internal working source, but most of the code should apply cleanly. I was able to get the DVB-C working (tuned and watched TV). Haven't tested DVB-T (no signal atm). Special thanks to everybody who worked on the code and to Antti Palosaari and Devin Heitmueller who provided essential support on irc. Hardware is based of: Empia EM2884 Micronas DRX 3926K NXP TDA18271HDC2 AVF4910 (not used atm) Signed-off-by: Ivan Kalvachev <ikalvachev@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Antti Palosaari authored
Hardware is based of: Empia EM2884 Micronas DRX 3926K NXP TDA18271HDC2 ... + analog parts. Analog is not supported currently. Only DVB-T and DVB-C. There seems to be still problems for locking DVB-C channels which have strong signal. Attenuator helps. I think it is demodulator IF/RF AGC issue. Lets fix it later. Patches are welcome. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
I found one more place where -EINVAL is used instead of -ENOTTY: Note that drivers/media/dvb/dvb-core/dvbdev.c has the same code, but as far as I can tell DVB is still using -EINVAL for unknown ioctls so I didn't change that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
- copyright change - use the kbuild module name for messages - remove useless code - add/remove blank lines, parenthesis, braces - add/change some information messages Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
The bridge register 1061 may take only the values 01 (stop) or 03 (start). Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
The JPEG compression may be adjusted from the packet fill ratio and from the flag 'USB FIFO full' returned in each frame. The code is adapted from the one in gspca sonixj and uses a workqueue. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
The new functions i2c_w1_buf() and i2c_w2_buf() handle the write loops. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
The JPEG compression quality was hardcoded to 95%. This value was too big, raising often buffer overflows. This quality is now 80% by default and is settable. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
The reset of the Omnivision sensors takes a long time (200ms). Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
The frame header was checked on packets of size 64 bytes only, while the webcams may put a frame header at the beginning of bigger packets. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
The line defining the value of the register 08 for the sensor cs2102k was commented by error in commit 30c73d46. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jose Alberto Reguero authored
This patch adds brightness control to the OmniVision 5621 sensor. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jean-François Moine authored
This patch is adapted from Sylwester's patch proposed on 2012/02/22. The JPEG compression control does not work with the autoquality done for the sensors hv7131r and pas202b. Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-