- 05 May, 2018 6 commits
-
-
Ard Biesheuvel authored
Add support for the SM4 symmetric cipher implemented using the special SM4 instructions introduced in ARM architecture revision 8.2. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
In preparation of adding support for the SIMD based arm64 implementation of arm64, which requires a fallback to non-SIMD code when invoked in certain contexts, expose the generic SM4 encrypt and decrypt routines to other drivers. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
lionel.debieve@st.com authored
When suspend is called after pm_runtime_suspend, same callback is used and access to rng register is freezing system. By calling the pm_runtime_force_suspend, it first checks that runtime has been already done. Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
-
lionel.debieve@st.com authored
Define default state for stm32_rng driver. It will be default selected with multi_v7_defconfig Signed-off-by:
-
Gilad Ben-Yossef authored
Fix incorrect use of %pad as a printk format string for none dma_addr_t variable. Discovered via smatch. Signed-off-by:
-
Gilad Ben-Yossef authored
Enable CryptoCell support for hardware keys. Hardware keys are regular AES keys loaded into CryptoCell internal memory via firmware, often from secure boot ROM or hardware fuses at boot time. As such, they can be used for enc/dec purposes like any other key but cannot (read: extremely hard to) be extracted since since they are not available anywhere in RAM during runtime. The mechanism has some similarities to s390 secure keys although the keys are not wrapped or sealed, but simply loaded offline. The interface was therefore modeled based on the s390 secure keys support. Signed-off-by:
-
- 28 Apr, 2018 11 commits
-
-
Christian Lamparter authored
This patch fixes a crash that happens when testing rfc4543(gcm(aes)) Unable to handle kernel paging request for data at address 0xf59b3420 Faulting instruction address: 0xc0012994 Oops: Kernel access of bad area, sig: 11 [#1] BE PowerPC 44x Platform Modules linked in: tcrypt(+) crypto4xx [...] CPU: 0 PID: 0 Comm: swapper Tainted: G O 4.17.0-rc1+ #23 NIP: c0012994 LR: d3077934 CTR: 06026d49 REGS: cfff7e30 TRAP: 0300 Tainted: G O (4.17.0-rc1+) MSR: 00029000 <CE,EE,ME> CR: 44744822 XER: 00000000 DEAR: f59b3420 ESR: 00000000 NIP [c0012994] __dma_sync+0x58/0x10c LR [d3077934] crypto4xx_bh_tasklet_cb+0x188/0x3c8 [crypto4xx] __dma_sync was fed the temporary _dst that crypto4xx_build_pd() had in it's function stack. This clearly never worked. This patch therefore overhauls the code from the original driver and puts the temporary dst sg list into aead's request context. Fixes: a0aae821 ("crypto: crypto4xx - prepare for AEAD support") Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Christian Lamparter authored
1020 bytes is the limit for associated data. Any more and it will no longer fit into hash_crypto_offset anymore. The hardware will not process aead requests with plaintext that have less than AES_BLOCK_SIZE bytes. When decrypting aead requests the authsize has to be taken in account as well, as it is part of the cryptlen. Otherwise the hardware will think it has been misconfigured and will return: aead return err status = 0x98 For rtc4543(gcm(aes)), the hardware has a dedicated GMAC mode as part of the hash function set. Signed-off-by:
-
Christian Lamparter authored
This patch fixes cts(cbc(aes)) test when cbc-aes-ppc4xx is used. alg: skcipher: Test 1 failed (invalid result) on encryption for cts(cbc-aes-ppc4xx) 00000000: 4b 10 75 fc 2f 14 1b 6a 27 35 37 33 d1 b7 70 05 00000010: 97 alg: skcipher: Failed to load transform for cts(cbc(aes)): -2 The CTS cipher mode expect the IV (req->iv) of skcipher_request to contain the last ciphertext block after the {en,de}crypt operation is complete. Fix this issue for the AMCC Crypto4xx hardware engine. The tcrypt test case for cts(cbc(aes)) is now correctly passed. name : cts(cbc(aes)) driver : cts(cbc-aes-ppc4xx) module : cts priority : 300 refcnt : 1 selftest : passed internal : no type : skcipher async : yes blocksize : 16 min keysize : 16 max keysize : 32 ivsize : 16 chunksize : 16 walksize : 16 Signed-off-by: -
Christian Lamparter authored
This patch adds support for the aes-ctr skcipher. name : ctr(aes) driver : ctr-aes-ppc4xx module : crypto4xx priority : 300 refcnt : 1 selftest : passed internal : no type : skcipher async : yes blocksize : 16 min keysize : 16 max keysize : 32 ivsize : 16 chunksize : 16 walksize : 16 The hardware uses only the last 32-bits as the counter while the kernel tests (aes_ctr_enc_tv_template[4] for example) expect that the whole IV is a counter. To make this work, the driver will fallback if the counter is going to overlow. The aead's crypto4xx_setup_fallback() function is renamed to crypto4xx_aead_setup_fallback. Signed-off-by:
-
Christian Lamparter authored
This patch fixes some of the -Wvla warnings. crypto4xx_alg.c:83:19: warning: Variable length array is used. crypto4xx_alg.c:273:56: warning: Variable length array is used. crypto4xx_alg.c:380:32: warning: Variable length array is used. Signed-off-by:
-
Christian Lamparter authored
The ablkcipher APIs have been effectively deprecated since [1]. This patch converts the crypto4xx driver to the new skcipher APIs. [1] <https://www.spinics.net/lists/linux-crypto/msg18133.html> Signed-off-by:
-
Christian Lamparter authored
This patch provides a cheap 2MiB/s+ (~ 6%) performance improvement over the current code. This is because the compiler can now optimize several endian swap memcpy. Signed-off-by:
-
Varsha Rao authored
This patch fixes the clang warning of extraneous parentheses, with the following coccinelle script. @@ identifier i; constant c; expression e; @@ ( !((e)) | -(( \(i == c\|i != c\|i <= c\|i < c\|i >= c\|i > c\) -)) ) Signed-off-by:
Varsha Rao <rvarsha016@gmail.com> Signed-off-by:
-
Wolfram Sang authored
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Bin Liu authored
Fixes: 8043bb1a ("crypto: omap-sham - convert driver logic to use sgs for data xmit") The memory pages freed in omap_sham_finish_req() were less than those allocated in omap_sham_copy_sgs(). Cc: stable@vger.kernel.org Signed-off-by:
Bin Liu <b-liu@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Geert Uytterhoeven authored
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Mark Brown <broonie@kernel.org> Acked-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
-
- 20 Apr, 2018 23 commits
-
-
Fabio Estevam authored
Use kmemdup() rather than duplicating its implementation. By usign kmemdup() we can also get rid of the 'val' variable. Detected with Coccinelle script. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Horia Geantă authored
Sometimes the provided RSA input buffer provided is not stripped of leading zeros. This could cause its size to be bigger than that of the modulus, making the HW complain: caam_jr 2142000.jr1: 40000789: DECO: desc idx 7: Protocol Size Error - A protocol has seen an error in size. When running RSA, pdb size N < (size of F) when no formatting is used; or pdb size N < (F + 11) when formatting is used. Fix the problem by stripping off the leading zero from input data before feeding it to the CAAM accelerator. Fixes: 8c419778 ("crypto: caam - add support for RSA algorithm") Cc: <stable@vger.kernel.org> # 4.8+ Reported-by:
Martin Townsend <mtownsend1973@gmail.com> Link: https://lkml.kernel.org/r/CABatt_ytYORYKtApcB4izhNanEKkGFi9XAQMjHi_n-8YWoCRiw@mail.gmail.comSigned-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
davidwang authored
New Centaur CPU(Family > 6) supprt Random Number Generator, but can't support MSR_VIA_RNG. Just like VIA Nano. Signed-off-by:
David Wang <davidwang@zhaoxin.com> Signed-off-by:
-
Fabio Estevam authored
There is no need to assign an error value to 'ret' prior to calling mpi_read_raw_from_sgl() because in the case of error the 'ret' variable will be assigned to the error code inside the if block. In the case of non failure, 'ret' will be overwritten immediately after, so remove the unneeded assignment. Signed-off-by:
-
Mahipal Challa authored
The following error is triggered by the ThunderX ZIP driver if the testmanager is enabled: [ 199.069437] ThunderX-ZIP 0000:03:00.0: Found ZIP device 0 177d:a01a on Node 0 [ 199.073573] alg: comp: Compression test 1 failed for deflate-generic: output len = 37 The reason for this error is the verification of the compression results. Verifying the compression result only works if all algorithm parameters are identical, in this case to the software implementation. Different compression engines like the ThunderX ZIP coprocessor might yield different compression results by tuning the algorithm parameters. In our case the compressed result is shorter than the test vector. We should not forbid different compression results but only check that compression -> decompression yields the same result. This is done already in the acomp test. Do something similar for test_comp(). Signed-off-by:
Mahipal Challa <mchalla@cavium.com> Signed-off-by:
Balakrishna Bhamidipati <bbhamidipati@cavium.com> [jglauber@cavium.com: removed unrelated printk changes, rewrote commit msg, fixed whitespace and unneeded initialization] Signed-off-by:
Jan Glauber <jglauber@cavium.com> Signed-off-by:
-
Fabio Estevam authored
The 'era' information can be retrieved from CAAM registers, so introduce a caam_get_era_from_hw() function that gets it via register reads in case the 'fsl,sec-era' property is not passed in the device tree. This function is based on the U-Boot implementation from drivers/crypto/fsl/sec.c Signed-off-by:
Breno Lima <breno.lima@nxp.com> Signed-off-by:
-
Fabio Estevam authored
caam_get_era() is only used locally, so do not export this function and make it static instead. Signed-off-by:
-
Jan Glauber authored
Switch to raw_smp_processor_id() to prevent a number of warnings from kernel debugging. We do not care about preemption here, as the CPU number is only used as a poor mans load balancing or device selection. If preemption happens during a compress/decompress operation a small performance hit will occur but everything will continue to work, so just ignore it. Signed-off-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
-
Jan Glauber authored
The pending request counter was read from the wrong register. While at it, there is no need to use an atomic for it as it is only read localy in a loop. Signed-off-by:
-
Jan Glauber authored
Avoid two potential divisions by zero when calculating average values for the zip statistics. Signed-off-by:
-
Jan Glauber authored
After issuing a request an endless loop was used to read the completion state from memory which is asynchronously updated by the ZIP coprocessor. Add an upper bound to the retry attempts to prevent a CPU getting stuck forever in case of an error. Additionally, add a read memory barrier and a small delay between the reading attempts. Signed-off-by:
-
Jan Glauber authored
Enabling virtual mapped kernel stacks breaks the thunderx_zip driver. On compression or decompression the executing CPU hangs in an endless loop. The reason for this is the usage of __pa by the driver which does no longer work for an address that is not part of the 1:1 mapping. The zip driver allocates a result struct on the stack and needs to tell the hardware the physical address within this struct that is used to signal the completion of the request. As the hardware gets the wrong address after the broken __pa conversion it writes to an arbitrary address. The zip driver then waits forever for the completion byte to contain a non-zero value. Allocating the result struct from 1:1 mapped memory resolves this bug. Signed-off-by:
-
Salvatore Mesoraca authored
We avoid various VLAs[1] by using constant expressions for block size and alignment mask. [1] http://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by:
Salvatore Mesoraca <s.mesoraca16@gmail.com> Signed-off-by:
-
Salvatore Mesoraca authored
In preparation for the removal of VLAs[1] from crypto code. We create 2 new compile-time constants: all ciphers implemented in Linux have a block size less than or equal to 16 bytes and the most demanding hw require 16 bytes alignment for the block buffer. We also enforce these limits in crypto_check_alg when a new cipher is registered. [1] http://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by:
-
Colin Ian King authored
There is a double assignment to cdev->ports, the first is redundant as it is over-written so remove it. Detected by CoverityScan, CID#1467432 ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The structure crypto_info contains fields that are not initialized and only .version is set. The copy_to_user call is hence leaking information from the stack to userspace which must be avoided. Fix this by zero'ing all the unused fields. Detected by CoverityScan, CID#1467421 ("Uninitialized scalar variable") Fixes: a0894394 ("crypto: chtls - Register chtls with net tls") Signed-off-by: -
Gustavo A. R. Silva authored
Add null checks on lookup_tid() return value in order to prevent null pointer dereferences. Addresses-Coverity-ID: 1467422 ("Dereference null return value") Addresses-Coverity-ID: 1467443 ("Dereference null return value") Addresses-Coverity-ID: 1467445 ("Dereference null return value") Addresses-Coverity-ID: 1467449 ("Dereference null return value") Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
In crypto_authenc_esn_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by:
-
Tudor-Dan Ambarus authored
In crypto_authenc_setkey we save pointers to the authenc keys in a local variable of type struct crypto_authenc_keys and we don't zeroize it after use. Fix this and don't leak pointers to the authenc keys. Signed-off-by:
-
Nick Terrell authored
Adds zstd support to crypto and scompress. Only supports the default level. Previously we held off on this patch, since there weren't any users. Now zram is ready for zstd support, but depends on CONFIG_CRYPTO_ZSTD, which isn't defined until this patch is in. I also see a patch adding zstd to pstore [0], which depends on crypto zstd. [0] lkml.kernel.org/r/9c9416b2dff19f05fb4c35879aaa83d11ff72c92.1521626182.git.geliangtang@gmail.com Signed-off-by:
Nick Terrell <terrelln@fb.com> Signed-off-by:
-
Kees Cook authored
On the quest to remove all VLAs from the kernel[1], this avoids VLAs by just using the maximum allocation size (4 bytes) for stack arrays. All the VLAs in ecc were either 3 or 4 bytes (or a multiple), so just make it 4 bytes all the time. Initialization routines are adjusted to check that ndigits does not end up larger than the arrays. This includes a removal of the earlier attempt at this fix from commit a963834b4742 ("crypto/ecc: Remove stack VLA usage") [1] https://lkml.org/lkml/2018/3/7/621Signed-off-by:Kees Cook <keescook@chromium.org> Signed-off-by:
-
Horia Geantă authored
There are two IV-related issues: (1) crypto API does not guarantee to provide an IV buffer that is DMAable, thus it's incorrect to DMA map it (2) for in-place decryption, since ciphertext is overwritten with plaintext, updated IV (req->info) will contain the last block of plaintext (instead of the last block of ciphertext) While these two issues could be fixed separately, it's straightforward to fix both in the same time - by using the {ablkcipher,aead}_edesc extended descriptor to store the IV that will be fed to the crypto engine; this allows for fixing (2) by saving req->src[last_block] in req->info directly, i.e. without allocating yet another temporary buffer. A side effect of the fix is that it's no longer possible to have the IV contiguous with req->src or req->dst. Code checking for this case is removed. Cc: <stable@vger.kernel.org> # 4.14+ Fixes: a68a1938 ("crypto: caam/qi - properly set IV after {en,de}crypt") Link: http://lkml.kernel.org/r/20170113084620.GF22022@gondor.apana.org.auReported-by: -
Horia Geantă authored
There are two IV-related issues: (1) crypto API does not guarantee to provide an IV buffer that is DMAable, thus it's incorrect to DMA map it (2) for in-place decryption, since ciphertext is overwritten with plaintext, updated req->info will contain the last block of plaintext (instead of the last block of ciphertext) While these two issues could be fixed separately, it's straightforward to fix both in the same time - by allocating extra space in the ablkcipher_edesc for the IV that will be fed to the crypto engine; this allows for fixing (2) by saving req->src[last_block] in req->info directly, i.e. without allocating another temporary buffer. A side effect of the fix is that it's no longer possible to have the IV and req->src contiguous. Code checking for this case is removed. Cc: <stable@vger.kernel.org> # 4.13+ Fixes: 854b06f7 ("crypto: caam - properly set IV after {en,de}crypt") Link: http://lkml.kernel.org/r/20170113084620.GF22022@gondor.apana.org.auReported-by:
-
