- 13 Jun, 2019 1 commit
-
-
Yintian Tao authored
we need register pm sysfs for virt in order to support dpm level modification because smu ip block will not be added under SRIOV v2: whitespace fixes (Alex) Signed-off-by:
Yintian Tao <yttao@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
- 11 Jun, 2019 39 commits
-
-
Oak Zeng authored
We can't have devices that are not completely initialized in kfd topology. Otherwise it is a race condition when user access not completely initialized device. This also addresses a kfd_topology_add_device accessing NULL dqm pointer issue. Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Oak Zeng authored
Move HSA_CAP_ATS_PRESENT initialization logic from kfd iommu codes to kfd topology codes. This removes kfd_iommu_device_init's dependency on kfd_topology_add_device. Also remove duplicate code setting the same. Signed-off-by:
-
Oak Zeng authored
SDMA queue allocation requires the dqm lock at it modify the global dqm members. Move up the dqm_lock so sdma queue allocation is enclosed in the critical section. Move mqd allocation out of critical section to avoid circular lock dependency. Signed-off-by:
-
Oak Zeng authored
The idea to break the circular lock dependency is to move allocate_mqd out of dqm lock protection. See callstack #1 below. [ 59.510149] [drm] Initialized amdgpu 3.30.0 20150101 for 0000:04:00.0 on minor 0 [ 513.604034] ====================================================== [ 513.604205] WARNING: possible circular locking dependency detected [ 513.604375] 4.18.0-kfd-root #2 Tainted: G W [ 513.604530] ------------------------------------------------------ [ 513.604699] kswapd0/611 is trying to acquire lock: [ 513.604840] 00000000d254022e (&dqm->lock_hidden){+.+.}, at: evict_process_queues_nocpsch+0x26/0x140 [amdgpu] [ 513.605150] but task is already holding lock: [ 513.605307] 00000000961547fc (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe4/0x250 [ 513.605540] which lock already depends on the new lock. [ 513.605747] the existing dependency chain (in reverse order) is: [ 513.605944] -> #4 (&anon_vma->rwsem){++++}: [ 513.606106] __vma_adjust+0x147/0x7f0 [ 513.606231] __split_vma+0x179/0x190 [ 513.606353] mprotect_fixup+0x217/0x260 [ 513.606553] do_mprotect_pkey+0x211/0x380 [ 513.606752] __x64_sys_mprotect+0x1b/0x20 [ 513.606954] do_syscall_64+0x50/0x1a0 [ 513.607149] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 513.607380] -> #3 (&mapping->i_mmap_rwsem){++++}: [ 513.607678] rmap_walk_file+0x1f0/0x280 [ 513.607887] page_referenced+0xdd/0x180 [ 513.608081] shrink_page_list+0x853/0xcb0 [ 513.608279] shrink_inactive_list+0x33b/0x700 [ 513.608483] shrink_node_memcg+0x37a/0x7f0 [ 513.608682] shrink_node+0xd8/0x490 [ 513.608869] balance_pgdat+0x18b/0x3b0 [ 513.609062] kswapd+0x203/0x5c0 [ 513.609241] kthread+0x100/0x140 [ 513.609420] ret_from_fork+0x24/0x30 [ 513.609607] -> #2 (fs_reclaim){+.+.}: [ 513.609883] kmem_cache_alloc_trace+0x34/0x2e0 [ 513.610093] reservation_object_reserve_shared+0x139/0x300 [ 513.610326] ttm_bo_init_reserved+0x291/0x480 [ttm] [ 513.610567] amdgpu_bo_do_create+0x1d2/0x650 [amdgpu] [ 513.610811] amdgpu_bo_create+0x40/0x1f0 [amdgpu] [ 513.611041] amdgpu_bo_create_reserved+0x249/0x2d0 [amdgpu] [ 513.611290] amdgpu_bo_create_kernel+0x12/0x70 [amdgpu] [ 513.611584] amdgpu_ttm_init+0x2cb/0x560 [amdgpu] [ 513.611823] gmc_v9_0_sw_init+0x400/0x750 [amdgpu] [ 513.612491] amdgpu_device_init+0x14eb/0x1990 [amdgpu] [ 513.612730] amdgpu_driver_load_kms+0x78/0x290 [amdgpu] [ 513.612958] drm_dev_register+0x111/0x1a0 [ 513.613171] amdgpu_pci_probe+0x11c/0x1e0 [amdgpu] [ 513.613389] local_pci_probe+0x3f/0x90 [ 513.613581] pci_device_probe+0x102/0x1c0 [ 513.613779] driver_probe_device+0x2a7/0x480 [ 513.613984] __driver_attach+0x10a/0x110 [ 513.614179] bus_for_each_dev+0x67/0xc0 [ 513.614372] bus_add_driver+0x1eb/0x260 [ 513.614565] driver_register+0x5b/0xe0 [ 513.614756] do_one_initcall+0xac/0x357 [ 513.614952] do_init_module+0x5b/0x213 [ 513.615145] load_module+0x2542/0x2d30 [ 513.615337] __do_sys_finit_module+0xd2/0x100 [ 513.615541] do_syscall_64+0x50/0x1a0 [ 513.615731] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 513.615963] -> #1 (reservation_ww_class_mutex){+.+.}: [ 513.616293] amdgpu_amdkfd_alloc_gtt_mem+0xcf/0x2c0 [amdgpu] [ 513.616554] init_mqd+0x223/0x260 [amdgpu] [ 513.616779] create_queue_nocpsch+0x4d9/0x600 [amdgpu] [ 513.617031] pqm_create_queue+0x37c/0x520 [amdgpu] [ 513.617270] kfd_ioctl_create_queue+0x2f9/0x650 [amdgpu] [ 513.617522] kfd_ioctl+0x202/0x350 [amdgpu] [ 513.617724] do_vfs_ioctl+0x9f/0x6c0 [ 513.617914] ksys_ioctl+0x66/0x70 [ 513.618095] __x64_sys_ioctl+0x16/0x20 [ 513.618286] do_syscall_64+0x50/0x1a0 [ 513.618476] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 513.618695] -> #0 (&dqm->lock_hidden){+.+.}: [ 513.618984] __mutex_lock+0x98/0x970 [ 513.619197] evict_process_queues_nocpsch+0x26/0x140 [amdgpu] [ 513.619459] kfd_process_evict_queues+0x3b/0xb0 [amdgpu] [ 513.619710] kgd2kfd_quiesce_mm+0x1c/0x40 [amdgpu] [ 513.620103] amdgpu_amdkfd_evict_userptr+0x38/0x70 [amdgpu] [ 513.620363] amdgpu_mn_invalidate_range_start_hsa+0xa6/0xc0 [amdgpu] [ 513.620614] __mmu_notifier_invalidate_range_start+0x70/0xb0 [ 513.620851] try_to_unmap_one+0x7fc/0x8f0 [ 513.621049] rmap_walk_anon+0x121/0x290 [ 513.621242] try_to_unmap+0x93/0xf0 [ 513.621428] shrink_page_list+0x606/0xcb0 [ 513.621625] shrink_inactive_list+0x33b/0x700 [ 513.621835] shrink_node_memcg+0x37a/0x7f0 [ 513.622034] shrink_node+0xd8/0x490 [ 513.622219] balance_pgdat+0x18b/0x3b0 [ 513.622410] kswapd+0x203/0x5c0 [ 513.622589] kthread+0x100/0x140 [ 513.622769] ret_from_fork+0x24/0x30 [ 513.622957] other info that might help us debug this: [ 513.623354] Chain exists of: &dqm->lock_hidden --> &mapping->i_mmap_rwsem --> &anon_vma->rwsem [ 513.623900] Possible unsafe locking scenario: [ 513.624189] CPU0 CPU1 [ 513.624397] ---- ---- [ 513.624594] lock(&anon_vma->rwsem); [ 513.624771] lock(&mapping->i_mmap_rwsem); [ 513.625020] lock(&anon_vma->rwsem); [ 513.625253] lock(&dqm->lock_hidden); [ 513.625433] *** DEADLOCK *** [ 513.625783] 3 locks held by kswapd0/611: [ 513.625967] #0: 00000000f14edf84 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 [ 513.626309] #1: 00000000961547fc (&anon_vma->rwsem){++++}, at: page_lock_anon_vma_read+0xe4/0x250 [ 513.626671] #2: 0000000067b5cd12 (srcu){....}, at: __mmu_notifier_invalidate_range_start+0x5/0xb0 [ 513.627037] stack backtrace: [ 513.627292] CPU: 0 PID: 611 Comm: kswapd0 Tainted: G W 4.18.0-kfd-root #2 [ 513.627632] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 513.627990] Call Trace: [ 513.628143] dump_stack+0x7c/0xbb [ 513.628315] print_circular_bug.isra.37+0x21b/0x228 [ 513.628581] __lock_acquire+0xf7d/0x1470 [ 513.628782] ? unwind_next_frame+0x6c/0x4f0 [ 513.628974] ? lock_acquire+0xec/0x1e0 [ 513.629154] lock_acquire+0xec/0x1e0 [ 513.629357] ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu] [ 513.629587] __mutex_lock+0x98/0x970 [ 513.629790] ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu] [ 513.630047] ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu] [ 513.630309] ? evict_process_queues_nocpsch+0x26/0x140 [amdgpu] [ 513.630562] evict_process_queues_nocpsch+0x26/0x140 [amdgpu] [ 513.630816] kfd_process_evict_queues+0x3b/0xb0 [amdgpu] [ 513.631057] kgd2kfd_quiesce_mm+0x1c/0x40 [amdgpu] [ 513.631288] amdgpu_amdkfd_evict_userptr+0x38/0x70 [amdgpu] [ 513.631536] amdgpu_mn_invalidate_range_start_hsa+0xa6/0xc0 [amdgpu] [ 513.632076] __mmu_notifier_invalidate_range_start+0x70/0xb0 [ 513.632299] try_to_unmap_one+0x7fc/0x8f0 [ 513.632487] ? page_lock_anon_vma_read+0x68/0x250 [ 513.632690] rmap_walk_anon+0x121/0x290 [ 513.632875] try_to_unmap+0x93/0xf0 [ 513.633050] ? page_remove_rmap+0x330/0x330 [ 513.633239] ? rcu_read_unlock+0x60/0x60 [ 513.633422] ? page_get_anon_vma+0x160/0x160 [ 513.633613] shrink_page_list+0x606/0xcb0 [ 513.633800] shrink_inactive_list+0x33b/0x700 [ 513.633997] shrink_node_memcg+0x37a/0x7f0 [ 513.634186] ? shrink_node+0xd8/0x490 [ 513.634363] shrink_node+0xd8/0x490 [ 513.634537] balance_pgdat+0x18b/0x3b0 [ 513.634718] kswapd+0x203/0x5c0 [ 513.634887] ? wait_woken+0xb0/0xb0 [ 513.635062] kthread+0x100/0x140 [ 513.635231] ? balance_pgdat+0x3b0/0x3b0 [ 513.635414] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 513.635626] ret_from_fork+0x24/0x30 [ 513.636042] Evicting PASID 32768 queues [ 513.936236] Restoring PASID 32768 queues [ 524.708912] Evicting PASID 32768 queues [ 524.999875] Restoring PASID 32768 queues Signed-off-by: -
Oak Zeng authored
Introduce a new mqd allocation interface and split the original init_mqd function into two functions: allocate_mqd and init_mqd. Also renamed uninit_mqd to free_mqd. This is preparation work to fix a circular lock dependency. Signed-off-by:
-
Oak Zeng authored
This is prepare work to fix a circular lock dependency. No logic change Signed-off-by:
-
Oak Zeng authored
Also calls load_mqd with current->mm struct. The mm struct is used to read back user wptr of the queue. Signed-off-by:
-
Oak Zeng authored
Don't do the same for compute queues Signed-off-by:
-
Philip Yang authored
HMM provides new APIs and helps in kernel 5.2-rc1 to simplify driver path. The old hmm APIs are deprecated and will be removed in future. Below are changes in driver: 1. Change hmm_vma_fault to hmm_range_register and hmm_range_fault which supports range with multiple vmas, remove the multiple vmas handle path and data structure. 2. Change hmm_vma_range_done to hmm_range_unregister. 3. Use default flags to avoid pre-fill pfn arrays. 4. Use new hmm_device_ helpers. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Dan Carpenter authored
The "block" variable can be set by the user through debugfs, so it can be quite large which leads to shift wrapping here. This means we report a "block" as supported when it's not, and that leads to array overflows later on. This bug is not really a security issue in real life, because debugfs is generally root only. Fixes: 36ea1bd2 ("drm/amdgpu: add debugfs ctrl node") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Kent Russell authored
We have the rest of the support in the kerne, but we don't actually boot KFD on the device without this change Signed-off-by:
Kent Russell <kent.russell@amd.com> Reviewed-by:
-
Trigger Huang authored
For SR-IOV VF, powerplay may not be supported, in this case, error '-EINVAL' should not be returned. Signed-off-by:
Trigger Huang <Trigger.Huang@amd.com> Reviewed-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Samson Tam authored
[Why] Found issue in EDID Emulation where if we connect a display using a passive HDMI-DP dongle, disconnect it and then try to emulate a display using DP, we could not see 4K modes. This was because on a disconnect, dongle_max_pix_clk was still set so when we emulate using DP, in dc_link_validate_mode_timing(), it would think we were still using a dongle and limit the modes we support. [How] In dc_link_detect(), set dongle_max_pix_clk to 0 when we detect a hotplug out ( if new_connection_type = dc_connection_none ). Signed-off-by:
Samson Tam <Samson.Tam@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Su Sung Chung authored
refactor a code so we will call clk_mgr's enable_pme_wa function so we can use pme_wa for future asics. This way we don't need to worry about different ASIC since clk_mgr already have that information Signed-off-by:
Su Sung Chung <Su.Chung@amd.com> Reviewed-by:
Eric Yang <eric.yang2@amd.com> Acked-by:
-
abdoulaye berthe authored
[Description] The spec does not allow POST_LT_ADJ_GRANTED to be set when TPS4 is used. Signed-off-by:
abdoulaye berthe <abdoulaye.berthe@amd.com> Acked-by:
-
SivapiriyanKumarasamy authored
[Why] We incorrectly began powering down the display at boot/resume whenever fast boot was not possible. This should not be done in the case where there exists a stream for the eDP since this implies that we want to turn it on. [How] Add check for eDP stream to decide whether to power off edp. Signed-off-by:
SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Reza Amini <Reza.Amini@amd.com> Signed-off-by:
-
Wesley Chalmers authored
[WHY] By the time output csc matrix is being programmed, stream connection to OPP has been established, but this information has not been relayed back to HUBP. Signed-off-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Signed-off-by:
-
Harmanprit Tatla authored
[Why] Our existing logic in deciding whether to use RAM or ROM depends on whether we are dealing with an identity gamma ramp. [How] In addition to the is_identity flag a new is_logical_identity flag has been added. The is_identity flag now denotes whether the OS gamma is an RGB256 identity and the new logical identity will inidicate that the given gamma ramp regardless of its type is identity. Signed-off-by:
Harmanprit Tatla <harmanprit.tatla@amd.com> Reviewed-by:
-
Thomas Lim authored
[Why] For debugging underflow issues it can be useful to have asserts when the underflow initially occurs. [How] Read the underflow status registers after actions that have a high risk of causing underflow and assert that no underflow occurred. If underflow occurred, clear the bit. Signed-off-by:
Thomas Lim <Thomas.Lim@amd.com> Reviewed-by:
-
Dmytro Laktyushkin authored
Currently vmid is decided internally inside dc. This makes it difficult to use vmid use with external components. This change moves vmid logic outside dc and allowing vmid to be passed in as a parameter to DC. Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Jordan Lazare authored
[Why] VBios sometimes reports incorrect object type as encoder instead of connector [How] Change error message to debug message Signed-off-by:
Jordan Lazare <Jordan.Lazare@amd.com> Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
-
Chris Park authored
These are no longer needed, Also added RESERVED bits. Signed-off-by:
Chris Park <Chris.Park@amd.com> Reviewed-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
-
Aric Cyr authored
Signed-off-by:
-
Krunoslav Kovac authored
Using this logic breaks driver unload, this is a temporary fix a followup patch will properly fix this Signed-off-by:
-
Anthony Koo authored
[Why] HPD not going to be high if Panel VDD is off And all AUX transaction will fail :( [How] 1. Power on VDD before attempting detection if it isn't already on 2. Improve the robustness by having a retry mechanism on the first DPCD read after VDD on. If a particular board always holds HPD high incorrectly, the AUX access may fail, so we can retry in those scenarios. This change would only improve logic since it prevents AUX failure leading to bad resolution on internal panel. 3. We should never need to re-detect internal panel, so logic is re-arranged a bit to skip earlier. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] To prepare for the upcoming DRM plane color management properties we need to correct a lot of wrong behavior and assumptions made for CRTC color management. The documentation added by this commit in amdgpu_dm_color explains how the HW color pipeline works and its limitations with the DRM interface. The current implementation does the following wrong: - Implicit sRGB DGM when no CRTC DGM is set - Implicit sRGB RGM when no CRTC RGM is set - No way to specify a non-linear DGM matrix that produces correct output - No way to specify a correct RGM when a linear DGM is used We had workarounds for passing kms_color tests but not all of the behavior we had wrong was covered by these tests (especially when it comes to non-linear DGM). Testing both DGM and RGM at the same time isn't something kms_color tests well either. [How] The specifics for how color management works in AMDGPU and the new behavior can be found by reading the documentation added to amdgpu_dm_color.c from this patch. All of the incorrect cases from the old implementation have been addressed for the atomic interface, but there still a few TODOs for the legacy one. Note: this does cause regressions for kms_color@pipe-a-ctm-* over HDMI. The result looks correct from visual inspection but the CRC no longer matches. For reference, the test was previously doing the following: linear degamma -> CTM -> sRGB regamma -> RGB to YUV (709) -> ... Now the test is doing: linear degamma -> CTM -> linear regamma -> RGB to YUV (709) -> ... Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
-
Wesley Chalmers authored
[WHY] This is meant to make it clearer that 0xf is not a valid OPP ID, and that code making use of OPP IDs should not accept this value. Signed-off-by:
-
Charlene Liu authored
Signed-off-by:
-
Derek Lai authored
1. Add i2c_hw_Status check to make sure when HW i2c is in use. 2. Don't reset HW engine in is_hw_busy() and instead do this in process_transaction() because SW i2c does not check if hw i2c is in use Signed-off-by:
Derek Lai <Derek.Lai@amd.com> Reviewed-by:
-
Eric Bernstein authored
No need to assert just return Signed-off-by:
Eric Bernstein <eric.bernstein@amd.com> Reviewed-by:
-
Aric Cyr authored
Signed-off-by:
-
Charlene Liu authored
Implement floor, ceil, and fabs Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Almost every function in DC that works with stream state expects that the current state on the stream is the one that it should be writing out. These functions are typically triggered by specifying a particular stream update - but the actual contents of the stream update itself are ignored, leaving it to the DM to actually update the stream state itself. The problem with doing this in DM is a matter of timing. On Linux most of this is incorrectly done in atomic check, when we actually want it to be done during atomic commit tail while access to DC is locked. To give an example, a commit requesting to modify color management state for DM could come in, be rejected, but still have modified the actual system state for the stream since it's shared memory. The next time color management gets programmed it'll use the rejected color management info - which might not even still be around if it's a custom transfer function. So a reasonable place to perform this is within DC itself and this is the model that's currently in use for surface updates. DC can even compare the current system state to the incoming surface update to determine update level, something that can't currnetly be done with the framework for stream updates. [How] Duplicate the framework used for surface updates for stream updates as well. Copy all the updates after checking the update type. Signed-off-by:
-
Wesley Chalmers authored
[WHY] Some panels return a link rate of 0 (unknown) in DPCD 0. In this case, an appropriate mode cannot be set, and certain panels will show corruption as they are forced to use a mode they do not support. [HOW] Read DPCD 10 in the case where supported link rate from DPCD 0 is unknown, and pass that value on to the reported link rate. This re-introduces behaviour present in previous versions that appears to have been accidentally removed. Signed-off-by:
-
Tao.Huang authored
Signed-off-by:
Tao.Huang <Tao.Huang@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] The module parameter to specify the default ABM level is now defined, so hook it up in DM. [How] On connector reset specify the default level. DC will program this as part of the modeset since it gets passed onto the stream in dm_update_crtc_state. It's only set for eDP connectors, but it doesn't matter if this is specified for connectors or hardware that doesn't support ABM. It's DC's responsibility to check that ABM can be set or adjusted, and DC does check that the DMCU firmware is running and if there's backlight control available. Signed-off-by:
David Francis <david.francis@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] It's non trivial to configure or specify an ABM reduction level for userspace outside of X. There is also no method to specify the default ABM value at boot time. A parameter should be added to configure this. [How] Expose a module parameter that can specify the default ABM level to use for eDP connectors on DC enabled hardware that loads the DMCU firmware. The default is still disabled (0), but levels can range from 1-4. Levels control how much the backlight can be reduced, with being the least amount of reduction and four being the most reduction. Signed-off-by:
-
Monk Liu authored
It's incorrect to do soft reset for SRIOV, when GFX hang the WREG would stuck there becuase it goes KIQ way. the GPU reset counter is incorrect: always increase twice for each timedout Signed-off-by:
Monk Liu <Monk.Liu@amd.com> Reviewed-by:
-
