- 24 Jan, 2020 10 commits
-
-
Zhou Wang authored
This patch adds a driver for HiSilicon Kunpeng DMA engine. This DMA engine which is an PCIe iEP offers 30 channels, each channel has a send queue, a complete queue and an interrupt to help to do tasks. This DMA engine can do memory copy between memory blocks or between memory and device buffer. Signed-off-by:
Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by:
Zhenfa Qiu <qiuzhenfa@hisilicon.com> Link: https://lore.kernel.org/r/1579155057-80523-1-git-send-email-wangzhou1@hisilicon.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Dave Jiang authored
Create a char device region that will allow acquisition of user portals in order to allow applications to submit DMA operations. A char device will be created per work queue that gets exposed. The workqueue type "user" is used to mark a work queue for user char device. For example if the workqueue 0 of DSA device 0 is marked for char device, then a device node of /dev/dsa/wq0.0 will be created. Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965026985.73301.976523230037106742.stgit@djiang5-desk3.ch.intel.comSigned-off-by:
-
Dave Jiang authored
Add plumbing for dmaengine subsystem connection. The driver register a DMA device per DSA device. The channels are dynamically registered when a workqueue is configured to be "kernel:dmanegine" type. Signed-off-by:
-
Dave Jiang authored
This commit adds helper functions for DSA descriptor allocation, submission, and free operations. Signed-off-by:
-
Jing Lin authored
Add the sysfs ABI information for idxd driver in Documentation/ABI/stable directory. Signed-off-by:
Jing Lin <jing.lin@intel.com> Signed-off-by:
-
Dave Jiang authored
The device is left unconfigured when the driver is loaded. Various components are configured via the driver sysfs attributes. Once configuration is done, the device can be enabled by writing the device name to the bind attribute of the device driver sysfs. Disabling can be done similarly. Also the individual work queues can also be enabled and disabled through the bind/unbind attributes. A constructed hierarchy is created through the struct device framework in order to provide appropriate configuration points and device state and status. This hierarchy is presented off the virtual DSA bus. i.e. /sys/bus/dsa/... Signed-off-by:
-
Dave Jiang authored
The idxd driver introduces the Intel Data Stream Accelerator [1] that will be available on future Intel Xeon CPUs. One of the kernel access point for the driver is through the dmaengine subsystem. It will initially provide the DMA copy service to the kernel. Some of the main functionality introduced with this accelerator are: shared virtual memory (SVM) support, and descriptor submission using Intel CPU instructions movdir64b and enqcmds. There will be additional accelerator devices that share the same driver with variations to capabilities. This commit introduces the probe and initialization component of the driver. [1]: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specificationSigned-off-by:
-
Dave Jiang authored
With the channel registration routines broken out, now add support code to allow independent registering and unregistering of channels in a hotplug fashion. Signed-off-by:
-
Dave Jiang authored
In preparation for dynamic channel registration, the code segment that does the channel registration is broken out to its own function. Signed-off-by:
-
Dave Jiang authored
With the introduction of MOVDIR64B instruction, there is now an instruction that can write 64 bytes of data atomically. Quoting from Intel SDM: "There is no atomicity guarantee provided for the 64-byte load operation from source address, and processor implementations may use multiple load operations to read the 64-bytes. The 64-byte direct-store issued by MOVDIR64B guarantees 64-byte write-completion atomicity. This means that the data arrives at the destination in a single undivided 64-byte write transaction." We have identified at least 3 different use cases for this instruction in the format of func(dst, src, count): 1) Clear poison / Initialize MKTME memory @dst is normal memory. @src in normal memory. Does not increment. (Copy same line to all targets) @count (to clear/init multiple lines) 2) Submit command(s) to new devices @dst is a special MMIO region for a device. Does not increment. @src is normal memory. Increments. @count usually is 1, but can be multiple. 3) Copy to iomem in big chunks @dst is iomem and increments @src in normal memory and increments @count is number of chunks to copy Add support for case #2 to support device that will accept commands via this instruction. We provide a @count in order to submit a batch of preprogrammed descriptors in virtually contiguous memory. This allows the caller to submit multiple descriptors to a device with a single submission. The special device requires the entire 64bytes descriptor to be written atomically and will accept MOVDIR64B instruction. Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/157965022175.73301.10174614665472962675.stgit@djiang5-desk3.ch.intel.comSigned-off-by:
-
- 23 Jan, 2020 2 commits
-
-
Colin Ian King authored
There are spelling mistakes in dev_err messages. Fix them. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200122093818.2800743-1-colin.king@canonical.comSigned-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
-
- 21 Jan, 2020 18 commits
-
-
Geert Uytterhoeven authored
The functions dma_get_slave_channel() and dma_get_any_slave_channel() are called from DMA engine drivers only. Hence move their declarations from the public header file <linux/dmaengine.h> to the private header file drivers/dma/dmaengine.h. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200121093311.28639-4-geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
At its original introduction, dma_request_slave_channel_compat() used a wrapper, to accommodate filter functions that modify the mask passed. Filter functions can no longer modify masks, and the mask parameter was made const in commit a53e28da ("dma: Make the 'mask' parameter of __dma_request_channel const") consecutively. Hence remove the wrapper, and rename __dma_request_slave_channel_compat() to dma_request_slave_channel_compat(), to get rid of one more function name starting with a double underscore. Signed-off-by:
-
Geert Uytterhoeven authored
Commit aa1e6f1a ("dmaengine: kill struct dma_client and supporting infrastructure") removed the last user of the dma_device_satisfies_mask() wrapper. Remove the wrapper, and rename __dma_device_satisfies_mask() to dma_device_satisfies_mask(), to get rid of one more function starting with a double underscore. Signed-off-by:
-
Anson Huang authored
Add imx8mm/imx8mn/imx8mp sdma support. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1578893602-14395-1-git-send-email-Anson.Huang@nxp.comSigned-off-by:
-
Matthias Fend authored
Since the dma engine expects the burst length register content as power of 2 value, the burst length needs to be converted first. Additionally add a burst length range check to avoid corrupting unrelated register bits. Signed-off-by:
Matthias Fend <matthias.fend@wolfvision.net> Link: https://lore.kernel.org/r/20200115102249.24398-1-matthias.fend@wolfvision.netSigned-off-by:
-
Stefan Mavrodiev authored
Currently the cyclic transfers can be used only with normal DMAs. They can be used by pcm_dmaengine module, which is required for implementing sound with sun4i-hdmi encoder. This is so because the controller can accept audio only from a dedicated DMA. This patch enables them, following the existing style for the scatter/gather type transfers. Signed-off-by:
Stefan Mavrodiev <stefan@olimex.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200110141140.28527-2-stefan@olimex.comSigned-off-by:
-
Chen Zhou authored
There is duplicated argument to && in function fsl_qdma_free_chan_resources, which looks like a typo, pointer fsl_queue->desc_pool also needs NULL check, fix it. Detected with coccinelle. Fixes: b092529e ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs") Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Reviewed-by:
Peng Ma <peng.ma@nxp.com> Tested-by:
-
Peter Ujfalusi authored
Fixe the following warnings by making these static drivers/dma/ti/k3-psil-j721e.c:62:16: warning: symbol 'j721e_src_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-j721e.c:172:16: warning: symbol 'j721e_dst_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-j721e.c:216:20: warning: symbol 'j721e_ep_map' was not declared. Should it be static? CC drivers/dma/ti/k3-psil-j721e.o drivers/dma/ti/k3-psil-am654.c:52:16: warning: symbol 'am654_src_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-am654.c:127:16: warning: symbol 'am654_dst_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-am654.c:169:20: warning: symbol 'am654_ep_map' was not declared. Should it be static? Reported-by:
-
Grygorii Strashko authored
Certain users can not use right now the DMAengine API due to missing features in the core. Prime example is Networking. These users can use the glue layer interface to avoid misuse of DMAengine API and when the core gains the needed features they can be converted to use generic API. The most prominent features the glue layer clients are depending on: - most PSI-L native peripheral use extra rflow ranges on a receive channel and depending on the peripheral's configuration packets from a single free descriptor ring is going to be received to different receive ring - it is also possible to have different free descriptor rings per rflow and an rflow can also support 4 additional free descriptor ring based on the size of the incoming packet - out of order completion of descriptors on a channel - when we have several queues to handle different priority packets the descriptors will be completed 'out-of-order' - the notion of prep_slave_sg is not matching with what the streaming type of operation is demanding for networking - Streaming type of operation - Ability to fill the free descriptor ring with descriptors in anticipation of incoming traffic and when a packet arrives UDMAP will form a packet and gives it to the client driver - the descriptors are not backed with exact size data buffers as we don't know the size of the packet we will receive, but as a generic pool of buffers to be used by the receive channel - NAPI type of operation (polling instead of interrupt driven transfer) - without this we can not sustain gigabit speeds and we need to support NAPI - not to limit this to networking, but other high performance operations Signed-off-by:Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-12-peter.ujfalusi@ti.comSigned-off-by:
-
Peter Ujfalusi authored
Split patch for review containing: defines, structs, io and low level functions and interrupt callbacks. DMA driver for Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P) The UDMA-P is intended to perform similar (but significantly upgraded) functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P module supports the transmission and reception of various packet types. The UDMA-P is architected to facilitate the segmentation and reassembly of SoC DMA data structure compliant packets to/from smaller data blocks that are natively compatible with the specific requirements of each connected peripheral. Multiple Tx and Rx channels are provided within the DMA which allow multiple segmentation or reassembly operations to be ongoing. The DMA controller maintains state information for each of the channels which allows packet segmentation and reassembly operations to be time division multiplexed between channels in order to share the underlying DMA hardware. An external DMA scheduler is used to control the ordering and rate at which this multiplexing occurs for Transmit operations. The ordering and rate of Receive operations is indirectly controlled by the order in which blocks are pushed into the DMA on the Rx PSI-L interface. The UDMA-P also supports acting as both a UTC and UDMA-C for its internal channels. Channels in the UDMA-P can be configured to be either Packet-Based or Third-Party channels on a channel by channel basis. The initial driver supports: - MEM_TO_MEM (TR mode) - DEV_TO_MEM (Packet / TR mode) - MEM_TO_DEV (Packet / TR mode) - Cyclic (Packet / TR mode) - Metadata for descriptors Signed-off-by:
-
Peter Ujfalusi authored
New binding document for Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P). UDMA-P is introduced as part of the K3 architecture and can be found in AM654 and j721e. Signed-off-by:
-
Peter Ujfalusi authored
In K3 architecture the DMA operates within threads. One end of the thread is UDMAP, the other is on the peripheral side. The UDMAP channel configuration depends on the needs of the remote endpoint and it can be differ from peripheral to peripheral. This patch adds database for am654 and j721e and small API to fetch the PSI-L endpoint configuration from the database which should only used by the DMA driver(s). Another API is added for native peripherals to give possibility to pass new configuration for the threads they are using, which is needed to be able to handle changes caused by different firmware loaded for the peripheral for example. Signed-off-by:
-
Peter Ujfalusi authored
The K3 DMA architecture uses CPPI5 (Communications Port Programming Interface) specified descriptors over PSI-L bus within NAVSS. The header provides helpers, macros to work with these descriptors in a consistent way. Signed-off-by:
-
Peter Ujfalusi authored
dmaengine_get_direction_text() can be useful when the direction is printed out. The text is easier to comprehend than the number. Signed-off-by:
-
Peter Ujfalusi authored
A DMA hardware can have big cache or FIFO and the amount of data sitting in the DMA fabric can be an interest for the clients. For example in audio we want to know the delay in the data flow and in case the DMA have significantly large FIFO/cache, it can affect the latenc/delay Signed-off-by:
Tero Kristo <t-kristo@ti.com> Tested-by:
-
Peter Ujfalusi authored
The metadata is best described as side band data or parameters traveling alongside the data DMAd by the DMA engine. It is data which is understood by the peripheral and the peripheral driver only, the DMA engine see it only as data block and it is not interpreting it in any way. The metadata can be different per descriptor as it is a parameter for the data being transferred. If the DMA supports per descriptor metadata it can implement the attach, get_ptr/set_len callbacks. Client drivers must only use either attach or get_ptr/set_len to avoid misconfiguration. Client driver can check if a given metadata mode is supported by the channel during probe time with dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_CLIENT); dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_ENGINE); and based on this information can use either mode. Wrappers are also added for the metadata_ops. To be used in DESC_METADATA_CLIENT mode: dmaengine_desc_attach_metadata() To be used in DESC_METADATA_ENGINE mode: dmaengine_desc_get_metadata_ptr() dmaengine_desc_set_metadata_len() Signed-off-by:
-
Peter Ujfalusi authored
Update the provider and client documentation with details about the metadata support. Signed-off-by:
-
Vinod Koul authored
This is for dependency of new TI ringacc dmaengine drivers Merge tag 'drivers_soc_for_5.6' into topic/ti SOC: TI Keystone Ring Accelerator driver The Ring Accelerator (RINGACC or RA) provides hardware acceleration to enable straightforward passing of work between a producer and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs. Signed-off-by:
-
- 15 Jan, 2020 5 commits
-
-
Grygorii Strashko authored
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to enable straightforward passing of work between a producer and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs. The RINGACC converts constant-address read and write accesses to equivalent read or write accesses to a circular data structure in memory. The RINGACC eliminates the need for each DMA controller which needs to access ring elements from having to know the current state of the ring (base address, current offset). The DMA controller performs a read or write access to a specific address range (which maps to the source interface on the RINGACC) and the RINGACC replaces the address for the transaction with a new address which corresponds to the head or tail element of the ring (head for reads, tail for writes). Since the RINGACC maintains the state, multiple DMA controllers or channels are allowed to coherently share the same rings as applicable. The RINGACC is able to place data which is destined towards software into cached memory directly. Supported ring modes: - Ring Mode - Messaging Mode - Credentials Mode - Queue Manager Mode TI-SCI integration: Texas Instrument's System Control Interface (TI-SCI) Message Protocol now has control over Ringacc module resources management (RM) and Rings configuration. The corresponding support of TI-SCI Ringacc module RM protocol introduced as option through DT parameters: - ti,sci: phandle on TI-SCI firmware controller DT node - ti,sci-dev-id: TI-SCI device identifier as per TI-SCI firmware spec if both parameters present - Ringacc driver will configure/free/reset Rings using TI-SCI Message Ringacc RM Protocol. The Ringacc driver manages Rings allocation by itself now and requests TI-SCI firmware to allocate and configure specific Rings only. It's done this way because, Linux driver implements two stage Rings allocation and configuration (allocate ring and configure ring) while TI-SCI Message Protocol supports only one combined operation (allocate+configure). Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com>
-
Grygorii Strashko authored
The Ring Accelerator (RINGACC or RA) provides hardware acceleration to enable straightforward passing of work between a producer and a consumer. There is one RINGACC module per NAVSS on TI AM65x and j721e. This patch introduces RINGACC device tree bindings. Signed-off-by:
-
Logan Gunthorpe authored
On prep, a spin lock is taken and the next entry in the circular buffer is filled. On submit, the valid bit is set in the hardware descriptor and the lock is released. The DMA engine is started (if it's not already running) when the client calls dma_async_issue_pending(). Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20200103212021.2881-4-logang@deltatee.comSigned-off-by:
-
Logan Gunthorpe authored
Allocate DMA coherent memory for the ring of DMA descriptors and program the appropriate hardware registers. A tasklet is created which is triggered on an interrupt to process all the finished requests. Additionally, any remaining descriptors are aborted when the hardware is removed or the resources freed. Use an RCU pointer to synchronize PCI device unbind. Signed-off-by:
-
Logan Gunthorpe authored
Some PLX Switches can expose DMA engines via extra PCI functions on the upstream port. Each function will have one DMA channel. This patch is just the core PCI driver skeleton and dma engine registration. Signed-off-by:
-
- 26 Dec, 2019 5 commits
-
-
Sascha Hauer authored
The current descriptor is not on any list of the virtual DMA channel. Once sdma_terminate_all() is called when a descriptor is currently in flight then this one is forgotten to be freed. We have to call vchan_terminate_vdesc() on this descriptor to re-add it to the lists. Now that we also free the currently running descriptor we can (and actually have to) remove the current descriptor from its list also for the cyclic case. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
Robin Gong <yibin.gong@nxp.com> Tested-by:
-
Sascha Hauer authored
In sdma_tx_status() we must first find the current sdma_desc. In cyclic mode we assume that this can always be found with vchan_find_desc(). This is true because do not remove the current descriptor from the desc_issued list: /* * Do not delete the node in desc_issued list in cyclic mode, otherwise * the desc allocated will never be freed in vchan_dma_desc_free_list */ if (!(sdmac->flags & IMX_DMA_SG_LOOP)) list_del(&vd->node); We will change this in the next step, so check if the current descriptor is the desired one also for the cyclic case. Signed-off-by:
-
Sascha Hauer authored
Rename sdma_disable_channel_async() after the hook it implements, like done for all other functions in the SDMA driver. Signed-off-by:
-
Sascha Hauer authored
vchan_dma_desc_free_list() basically open codes vchan_vdesc_fini() in its loop body. Call it directly rather than duplicating the code. Signed-off-by:
-
Sascha Hauer authored
All list operations are protected by &vc->lock. As vchan_vdesc_fini() is called unlocked add the missing locking around the list operations. Signed-off-by:
-
