This patch adds CRC generation and validation support for nx-842.
Add CRC flag so that nx842 coprocessor includes CRC during compression
and validates during decompression.

Also changes in 842 SW compression to append CRC value at the end
of template and checks during decompression.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The clocksource does not provide clocksource_register() function since
f8935983 commit (clocksource: Mostly kill clocksource_register()), so
let's remove unnecessary information about this function from a comment.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Setkey function has been split into set_priv_key and set_pub_key.
Akcipher requests takes sgl for src and dst instead of void *.
Users of the API i.e. two existing RSA implementation and
test mgr code have been updated accordingly.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add mpi_read_raw_from_sgl and mpi_write_to_sgl helpers.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The original representation of FIFO size in the driver coupled with the
ambiguity in the documentation meant that it was easy to confuse readers.
This lead to a false positive BUG-find and subsequently time wastage
debugging this phantom issue.

Hopefully this patch can prevent future readers from falling into the
same trap.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Samples are documented to be available every 0.667us, so in theory
the 8 sample deep FIFO should take 5.336us to fill.  However, during
thorough testing, it became apparent that filling the FIFO actually
takes closer to 12us.

Also take into consideration that udelay() can behave oddly i.e. not
delay for as long as requested.

  Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>:

    "IIRC, Linus recommends a x2 factor on delays, especially
     timeouts generated by these functions.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

DT nodes should not append their addresses with '0x'.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

clk_prepare_enable() can fail so add a check for this and
return the error code if it fails.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for AES working in XEX-based Tweaked-codebook mode with
ciphertext Stealing (XTS)

sector index - HW limitation: CAAM device supports sector index of only
8 bytes to be used for sector index inside IV, instead of whole 16 bytes
received on request. This represents 2 ^ 64 = 16,777,216 Tera of possible
values for sector index.
Signed-off-by: Cristian Hristea <cristi.hristea@gmail.com>
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Alex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: Catalin Vasile <catalin.vasile@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The qce driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.

Thus removing qce_mapsg, qce_unmapsg and qce_countsg functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The convention is to use the name of the module in the driver structures
that are used for registering the device. The CCP module is currently
using a descriptive name. Replace the descriptive name with module name.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The CCP is meant to be more of an offload engine than an accelerator
engine. To avoid any confusion, change references to accelerator to
offload.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

With the creation of the device_dma_is_coherent API the "use_acpi" field
is no longer needed, so remove it.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace the usage of BUG_ON with WARN_ON and return an error.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove unneeded variable val_indx.
Issue found by a static analyzer.
Reported-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for ctr and xts encryption modes.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fixes the following sparse warnings:

 crypto/skcipher.c:94:5:
 warning: symbol 'crypto_init_skcipher_ops_blkcipher'
 was not declared. Should it be static?

 crypto/skcipher.c:185:5:
 warning: symbol 'crypto_init_skcipher_ops_ablkcipher'
 was not declared. Should it be static?
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

No authenc() ciphers are FIPS approved, nor is ecb(des).
After the end of 2015, ansi_cprng will also be non-approved.
Signed-off-by: John Haxby <john.haxby@oracle.com>
Acked-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sahara driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.

Thus removing the sahara_sha_unmap_sg function.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The caam driver use two dma_map_sg path according to SG are chained
or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.

Thus removing dma_map_sg_chained, dma_unmap_sg_chained
and __sg_count functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The talitos driver use two dma_map_sg path
according to SG are chained or not.
Since dma_map_sg can handle both case, clean the code with all
references to sg chained.

Thus removing talitos_map_sg, talitos_unmap_sg_chain
and sg_count functions.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some code cleanups after crypto API changes:
- Change qat_algs_unregister to a void function to keep it consistent
  with qat_asym_algs_unregister.
- Remove empty functions qat_algs_init & qat_algs_exit.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Module crc32c-intel uses a special read-only data section named .rotata.
This section is defined for K_table, and its name seems to be a spelling
mistake for .rodata.

Fixes: 473946e6 ("crypto: crc32c-pclmul - Shrink K_table to 32-bit words")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sahara_sg_length function of the sahara driver is the same
as sg_nents_for_len from lib/scatterlist.c
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The get_sg_count function of amcc is the same as sg_nents_for_len from
lib/scatterlist.c
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sg_count function in bfin_crc.c is the same function as sg_nents.
Remove the duplicate code and use sg_nents() instead.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Restructure the x86 sha512 glue code so we will expose sha512 transforms
based on SSSE3, AVX or AVX2 as separate individual drivers when cpu
provides support. This will make it easy for alternative algorithms to
be used if desired and makes the code cleaner and easier to maintain.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Restructure the x86 sha256 glue code so we will expose sha256 transforms
based on SSSE3, AVX, AVX2 or SHA-NI extension as separate individual
drivers when cpu provides such support. This will make it easy for
alternative algorithms to be used if desired and makes the code cleaner
and easier to maintain.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Restructure the x86 sha1 glue code so we will expose sha1 transforms based
on SSSE3, AVX, AVX2 or SHA-NI extension as separate individual drivers
when cpu provides such support. This will make it easy for alternative
algorithms to be used if desired and makes the code cleaner and easier
to maintain.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch provides the configuration and build support to
include and build the optimized SHA1 and SHA256 update transforms
for the kernel's crypto library.
Originally-by: Chandramouli Narayanan <mouli_7982@yahoo.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds the glue code to detect and utilize the Intel SHA
extensions optimized SHA1 and SHA256 update transforms when available.

This code has been tested on Broxton for functionality.
Originally-by: Chandramouli Narayanan <mouli_7982@yahoo.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch includes the Intel SHA Extensions optimized implementation
of SHA-256 update function. This function has been tested on Broxton
platform and measured a speed up of 3.6x over the SSSE3 implementiation
for 4K blocks.
Originally-by: Chandramouli Narayanan <mouli_7982@yahoo.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch includes the Intel SHA Extensions optimized implementation
of SHA-1 update function. This function has been tested on Broxton
platform and measured a speed up of 3.6x over the SSSE3 implementiation
for 4K blocks.
Originally-by: Chandramouli Narayanan <mouli_7982@yahoo.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Pankaj Dev <pankaj.dev@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Kieran Bingham <kieranbingham@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If we attempt to use sysfs to change the current RNG in the usual
way i.e. issuing something like:

`echo 8a8a000.rng > /sys/devices/virtual/misc/hw_random/rng_current`

... it will fail because the code doesn't currently take the '\n'
into consideration.  Well, now it does.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In April 2009, commit d4056405 ("Driver Core: misc: add node name support
for misc devices.") inadvertently changed the device node name from
/dev/hw_random to /dev/hwrng.  Since 6 years has passed since the change
it seems unpractical to change it back, as this node name is probably
considered ABI by now.  So instead, we'll just change the Kconfig help
to match the current situation.

NB: It looks like rng-tools have already been updated.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Kieran Bingham <kieranbingham@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In April 2009, commit d4056405 ("Driver Core: misc: add node name support
for misc devices.") inadvertently changed the device node name from
/dev/hw_random to /dev/hwrng.  Since 6 years has passed since the change
it seems unpractical to change it back, as this node name is probably
considered ABI by now.  So instead, we'll just change the documentation
to match the current situation.

NB: It looks like rng-tools have already been updated.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Kieran Bingham <kieranbingham@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>