- 28 Nov, 2019 40 commits
-
-
Sabrina Dubroca authored
[ Upstream commit 07bddef9 ] Currently, the kernel doesn't let the administrator set a macsec device up unless its lower device is currently up. This is inconsistent, as a macsec device that is up won't automatically go down when its lower device goes down. Now that linkstate propagation works, there's really no reason for this limitation, so let's remove it. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Reported-by:
Radu Rendec <radu.rendec@gmail.com> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sabrina Dubroca authored
[ Upstream commit e6ac0758 ] Like all other virtual devices (macvlan, vlan), the operstate of a macsec device should match the state of its lower device. This is done by calling netif_stacked_transfer_operstate from its netdevice notifier. We also need to call netif_stacked_transfer_operstate when a new macsec device is created, so that its operstate is set properly. This is only relevant when we try to bring the device up directly when we create it. Radu Rendec proposed a similar patch, inspired from the 802.1q driver, that included changing the administrative state of the macsec device, instead of just the operstate. This version is similar to what the macvlan driver does, and updates only the operstate. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Reported-by:
Patrick Talbert <ptalbert@redhat.com> Signed-off-by:
-
Dave Chinner authored
[ Upstream commit 64081362 ] We've recently seen a workload on XFS filesystems with a repeatable deadlock between background writeback and a multi-process application doing concurrent writes and fsyncs to a small range of a file. range_cyclic writeback Process 1 Process 2 xfs_vm_writepages write_cache_pages writeback_index = 2 cycled = 0 .... find page 2 dirty lock Page 2 ->writepage page 2 writeback page 2 clean page 2 added to bio no more pages write() locks page 1 dirties page 1 locks page 2 dirties page 1 fsync() .... xfs_vm_writepages write_cache_pages start index 0 find page 1 towrite lock Page 1 ->writepage page 1 writeback page 1 clean page 1 added to bio find page 2 towrite lock Page 2 page 2 is writeback <blocks> write() locks page 1 dirties page 1 fsync() .... xfs_vm_writepages write_cache_pages start index 0 !done && !cycled sets index to 0, restarts lookup find page 1 dirty find page 1 towrite lock Page 1 page 1 is writeback <blocks> lock Page 1 <blocks> DEADLOCK because: - process 1 needs page 2 writeback to complete to make enough progress to issue IO pending for page 1 - writeback needs page 1 writeback to complete so process 2 can progress and unlock the page it is blocked on, then it can issue the IO pending for page 2 - process 2 can't make progress until process 1 issues IO for page 1 The underlying cause of the problem here is that range_cyclic writeback is processing pages in descending index order as we hold higher index pages in a structure controlled from above write_cache_pages(). The write_cache_pages() caller needs to be able to submit these pages for IO before write_cache_pages restarts writeback at mapping index 0 to avoid wcp inverting the page lock/writeback wait order. generic_writepages() is not susceptible to this bug as it has no private context held across write_cache_pages() - filesystems using this infrastructure always submit pages in ->writepage immediately and so there is no problem with range_cyclic going back to mapping index 0. However: mpage_writepages() has a private bio context, exofs_writepages() has page_collect fuse_writepages() has fuse_fill_wb_data nfs_writepages() has nfs_pageio_descriptor xfs_vm_writepages() has xfs_writepage_ctx All of these ->writepages implementations can hold pages under writeback in their private structures until write_cache_pages() returns, and hence they are all susceptible to this deadlock. Also worth noting is that ext4 has it's own bastardised version of write_cache_pages() and so it /may/ have an equivalent deadlock. I looked at the code long enough to understand that it has a similar retry loop for range_cyclic writeback reaching the end of the file and then promptly ran away before my eyes bled too much. I'll leave it for the ext4 developers to determine if their code is actually has this deadlock and how to fix it if it has. There's a few ways I can see avoid this deadlock. There's probably more, but these are the first I've though of: 1. get rid of range_cyclic altogether 2. range_cyclic always stops at EOF, and we start again from writeback index 0 on the next call into write_cache_pages() 2a. wcp also returns EAGAIN to ->writepages implementations to indicate range cyclic has hit EOF. writepages implementations can then flush the current context and call wpc again to continue. i.e. lift the retry into the ->writepages implementation 3. range_cyclic uses trylock_page() rather than lock_page(), and it skips pages it can't lock without blocking. It will already do this for pages under writeback, so this seems like a no-brainer 3a. all non-WB_SYNC_ALL writeback uses trylock_page() to avoid blocking as per pages under writeback. I don't think #1 is an option - range_cyclic prevents frequently dirtied lower file offset from starving background writeback of rarely touched higher file offsets. #2 is simple, and I don't think it will have any impact on performance as going back to the start of the file implies an immediate seek. We'll have exactly the same number of seeks if we switch writeback to another inode, and then come back to this one later and restart from index 0. #2a is pretty much "status quo without the deadlock". Moving the retry loop up into the wcp caller means we can issue IO on the pending pages before calling wcp again, and so avoid locking or waiting on pages in the wrong order. I'm not convinced we need to do this given that we get the same thing from #2 on the next writeback call from the writeback infrastructure. #3 is really just a band-aid - it doesn't fix the access/wait inversion problem, just prevents it from becoming a deadlock situation. I'd prefer we fix the inversion, not sweep it under the carpet like this. #3a is really an optimisation that just so happens to include the band-aid fix of #3. So it seems that the simplest way to fix this issue is to implement solution #2 Link: http://lkml.kernel.org/r/20181005054526.21507-1-david@fromorbit.comSigned-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Jan Kara <jack@suse.de> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 99986576 ] The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] get_zeroed_page(GFP_NOFS) fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 255: __dlm_put_mle in dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 254: spin_lock in dlm_put_ml [FUNC] get_zeroed_page(GFP_NOFS) fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle fs/ocfs2/dlm/dlmmaster.c, 222: __dlm_put_mle in dlm_put_mle_inuse fs/ocfs2/dlm/dlmmaster.c, 219: spin_lock in dlm_put_mle_inuse To fix this bug, GFP_NOFS is replaced with GFP_ATOMIC. This bug is found by my static analysis tool DSAC. Link: http://lkml.kernel.org/r/20180901112528.27025-1-baijiaju1990@gmail.comSigned-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
-
David S. Miller authored
[ Upstream commit 6c2fc9cd ] Such as: fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’: ./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value] #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) and drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’: ./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value] #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) Signed-off-by:
-
Felipe Rechia authored
[ Upstream commit e9013785 ] Fix a bug introduced by the creation of flush_all_to_thread() for processors that have SPE (Signal Processing Engine) and use it to compute floating-point operations. >From userspace perspective, the problem was seen in attempts of computing floating-point operations which should generate exceptions. For example: fork(); float x = 0.0 / 0.0; isnan(x); // forked process returns False (should be True) The operation above also should always cause the SPEFSCR FINV bit to be set. However, the SPE floating-point exceptions were turned off after a fork(). Kernel versions prior to the bug used flush_spe_to_thread(), which first saves SPEFSCR register values in tsk->thread and then calls giveup_spe(tsk). After commit 579e633e, the save_all() function was called first to giveup_spe(), and then the SPEFSCR register values were saved in tsk->thread. This would save the SPEFSCR register values after disabling SPE for that thread, causing the bug described above. Fixes 579e633e ("powerpc: create flush_all_to_thread()") Signed-off-by:
Felipe Rechia <felipe.rechia@datacom.com.br> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 3a313862 ] On r8a7791/koelsch, sometimes the following message is printed during system suspend: rcar_thermal e61f0000.thermal: thermal sensor was broken This happens if the workqueue runs while the device is already suspended. Fix this by using the freezable system workqueue instead, cfr. commit 51e20d0e ("thermal: Prevent polling from happening during system suspend"). Fixes: e0a5172e ("thermal: rcar: add interrupt support") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit 2452c96e ] Test $comm in kprobe-event argument syntax testcase only if it is supported on the kernel because $comm has been introduced 4.8 kernel. So on older stable kernel, it should be skipped. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit efddff27 ] IRQ wake up support for MAX8997 driver was initially configured by respective property in pdata. However, after the driver conversion to device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD drivers initialized from device-tree assume that they can be an irq wakeup source, so enable it also for MAX8997. This fixes support for wakeup from MAX8997 RTC alarm. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Fabio Estevam authored
[ Upstream commit 55143439 ] When trying to read any MC13892 ADC channel on a imx51-babbage board: The MC13892 PMIC shutdowns completely. After debugging this issue and comparing the MC13892 and MC13783 initializations done in the vendor kernel, it was noticed that the CHRGRAWDIV bit of the ADC0 register was not being set. This bit is set by default after power on, but the driver was clearing it. After setting this bit it is possible to read the ADC values correctly. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Sapthagiri Baratam authored
[ Upstream commit 6b269a41 ] Don't call runtime_put_sync when clk32k_ref is ARIZONA_32KZ_MCLK2 as there is no corresponding runtime_get_sync call. MCLK1 is not in the AoD power domain so if it is used as 32kHz clock source we need to hold a runtime PM reference to keep the device from going into low power mode. Fixes: cdd8da8c ("mfd: arizona: Add gating of external MCLKn clocks") Signed-off-by:
Sapthagiri Baratam <sapthagiri.baratam@cirrus.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Ivan Khoronzhuk authored
[ Upstream commit 9737cc99 ] After flushing all mcast entries from the table, the ones contained in mc list of ndev are not restored when promisc mode is toggled off, because they are considered as synched with ALE, thus, in order to restore them after promisc mode - reset syncing info. This fix touches only switch mode devices, including single port boards like Beagle Bone. Fixes: commit 5da19489 ("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update") Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit c94f026f ] These functions are supposed to return one on failure and zero on success. Returning a zero here could cause uninitialized variable bugs in several of the callers. For example: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority() error: uninitialized symbol 'caps'. Fixes: 48365e48 ("qlcnic: dcb: Add support for CEE Netlink interface.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit aeb5e02a ] Clang warns (trimmed for brevity): drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value to switch condition type (2147764552 to 18446744071562348872) [-Wswitch] case IMHOLD_L1: ^ drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value to switch condition type (2147764550 to 18446744071562348870) [-Wswitch] case IMCLEAR_L2: ^ 2 warnings generated. The root cause is that the _IOC macro can generate really large numbers, which don't find into type int. My research into how GCC and Clang are handling this at a low level didn't prove fruitful and surveying the kernel tree shows that aside from here and a few places in the scsi subsystem, everything that uses _IOC is at least of type 'unsigned int'. Make that change here because as nothing in this function cares about the signedness of the variable and it removes ambiguity, which is never good when dealing with compilers. While we're here, remove the unnecessary local variable ret (just return -EINVAL and 0 directly). Link: https://github.com/ClangBuiltLinux/linux/issues/67Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 2baf0781 ] We need to drop PG_checked flag on page as well when we clear PG_uptodate flag, in order to avoid treating the page as GCing one later. Signed-off-by:
Weichao Guo <guoweichao@huawei.com> Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit ef0f02fd ] Clang warns: drivers/rtc/rtc-s35390a.c:124:27: warning: implicit conversion from 'int' to 'char' changes value from 192 to -64 [-Wconstant-conversion] buf = S35390A_FLAG_RESET | S35390A_FLAG_24H; ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~ 1 warning generated. Update buf to be an unsigned 8-bit integer, which matches the buf member in struct i2c_msg. https://github.com/ClangBuiltLinux/linux/issues/145Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Yan, Zheng authored
[ Upstream commit c58f450b ] Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 46b83064 ] If PARPORT_PC_FIFO is not enabled, do not provide the dma lock macros and lock definition. Otherwise: ./arch/sparc/include/asm/parport.h:24:24: warning: ‘dma_spin_lock’ defined but not used [-Wunused-variable] static DEFINE_SPINLOCK(dma_spin_lock); ^~~~~~~~~~~~~ ./include/linux/spinlock_types.h:81:39: note: in definition of macro ‘DEFINE_SPINLOCK’ #define DEFINE_SPINLOCK(x) spinlock_t x = __SPIN_LOCK_UNLOCKED(x) Signed-off-by:
-
Vignesh R authored
[ Upstream commit b682cffa ] McSPI has 32 byte FIFO in Transmit-Receive mode. Current code tries to configuration FIFO watermark level for DMA trigger to be GCD of transfer length and max FIFO size which would mean trigger level may be set to 32 for transmit-receive mode if length is aligned. This does not work in case of SPI slave mode where FIFO always needs to have data ready whenever master starts the clock. With DMA trigger size of 32 there will be a small window during slave TX where DMA is still putting data into FIFO but master would have started clock for next byte, resulting in shifting out of stale data. Similarly, on Slave RX side there may be RX FIFO overflow Fix this by setting FIFO watermark for DMA trigger to word length. This means DMA is triggered as soon as FIFO has space for word length bytes and DMA would make sure FIFO is almost always full therefore improving FIFO occupancy in both master and slave mode. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit ec0c0bb4 ] Return an error when the function debug_register() fails allocating the debug handle. Also remove the registered debug handle when the initialization fails later on. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 64b9d16e ] Clang warns: drivers/atm/zatm.c:513:7: error: while loop has empty body [-Werror,-Wempty-body] zwait; ^ drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to silence this warning Get rid of this warning by using an empty do-while loop. While we're at it, add parentheses to make it clear that this is a function-like macro. Link: https://github.com/ClangBuiltLinux/linux/issues/42Suggested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit 826799e6 ] Commits ffb6ca33 and e08ea3a9 prevent setting xprt_min_resvport greater than xprt_max_resvport, but may also break simple code that sets one parameter then the other, if the new range does not overlap the old. Also it looks racy to me, unless there's some serialization I'm not seeing. Granted it would probably require malicious privileged processes (unless there's a chance these might eventually be settable in unprivileged containers), but still it seems better not to let userspace panic the kernel. Simpler seems to be to allow setting the parameters to whatever you want but interpret xprt_min_resvport > xprt_max_resvport as the empty range. Fixes: ffb6ca33 "sunrpc: Prevent resvport min/max inversion..." Fixes: e08ea3a9 "sunrpc: Prevent rexvport min/max inversion..." Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit e732f448 ] Signed-off-by:
-
Colin Ian King authored
[ Upstream commit e325808c ] Currently the call to atoi is being passed a single char string that is not null terminated, so there is a potential read overrun along the stack when parsing for an integer value. Fix this by instead using a 2 char string that is initialized to all zeros to ensure that a 1 char read into the string is always terminated with a \0. Detected by cppcheck: "Invalid atoi() argument nr 1. A nul-terminated string is required." Fixes: 3391ba0e ("usbip: tools: Extract generic code to be shared with vudc backend") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mattias Jacobsson authored
[ Upstream commit 09015855 ] Upon success the update_status handler returns a positive number corresponding to the number of bytes transferred by usb_control_msg. However the return code of the update_status handler should indicate if an error occurred(negative) or how many bytes of the user's input to sysfs that was consumed. Return code zero indicates all bytes were consumed. The bug can for example result in the update_status handler being called twice, the second time with only the "unconsumed" part of the user's input to sysfs. Effectively setting an incorrect brightness. Change the update_status handler to return zero for all successful transactions and forward usb_control_msg's error code upon failure. Signed-off-by:
Mattias Jacobsson <2pi@mok.nu> Signed-off-by:
-
Benjamin Herrenschmidt authored
[ Upstream commit fc0c8b36 ] There's some antiquated debug output that's trying to do a hand-made hexdump and turning into horrible 1-byte-per-line output these days. Use print_hex_dump() instead Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Philipp Klocke authored
[ Upstream commit eb7ebfa3 ] Compiling with clang yields the following warning: sound/i2c/cs8427.c:140:31: warning: implicit conversion from 'int' to 'char' changes value from 160 to -96 [-Wconstant-conversion] data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF; ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ Because CS8427_REG_AUTOINC is defined as 128, it is too big for a char field. So change data from char to unsigned char, that it can hold the value. This patch does not change the generated code. Signed-off-by:
Philipp Klocke <philipp97kl@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Steven Rostedt (VMware) authored
[ Upstream commit c2712b85 ] Andy had some concerns about using regs_get_kernel_stack_nth() in a new function regs_get_kernel_argument() as if there's any error in the stack code, it could cause a bad memory access. To be on the safe side, call probe_kernel_read() on the stack address to be extra careful in accessing the memory. A helper function, regs_get_kernel_stack_nth_addr(), was added to just return the stack address (or NULL if not on the stack), that will be used to find the address (and could be used by other functions) and read the address with kernel_probe_read(). Requested-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181017165951.09119177@gandalf.local.homeSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Dave Chinner authored
[ Upstream commit 37fd1678 ] When looking at a 4.18 based KASAN use after free report, I noticed that racing xfs_buf_rele() may race on dropping the last reference to the buffer and taking the buffer lock. This was the symptom displayed by the KASAN report, but the actual issue that was reported had already been fixed in 4.19-rc1 by commit e339dd8d ("xfs: use sync buffer I/O for sync delwri queue submission"). Despite this, I think there is still an issue with xfs_buf_rele() in this code: release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock); spin_lock(&bp->b_lock); if (!release) { ..... If two threads race on the b_lock after both dropping a reference and one getting dropping the last reference so release = true, we end up with: CPU 0 CPU 1 atomic_dec_and_lock() atomic_dec_and_lock() spin_lock(&bp->b_lock) spin_lock(&bp->b_lock) <spins> <release = true bp->b_lru_ref = 0> <remove from lists> freebuf = true spin_unlock(&bp->b_lock) xfs_buf_free(bp) <gets lock, reading and writing freed memory> <accesses freed memory> spin_unlock(&bp->b_lock) <reads/writes freed memory> IOWs, we can't safely take bp->b_lock after dropping the hold reference because the buffer may go away at any time after we drop that reference. However, this can be fixed simply by taking the bp->b_lock before we drop the reference. It is safe to nest the pag_buf_lock inside bp->b_lock as the pag_buf_lock is only used to serialise against lookup in xfs_buf_find() and no other locks are held over or under the pag_buf_lock there. Make this clear by documenting the buffer lock orders at the top of the file. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Netanel Belgazal authored
[ Upstream commit 8c590f97 ] The Kconfig limitation of X86 is to too wide. The ENA driver only requires a little endian dependency. Change the dependency to be on little endian CPU. Signed-off-by:
Netanel Belgazal <netanel@amazon.com> Signed-off-by:
-
Kyeongdon Kim authored
[ Upstream commit 33c4368e ] This fixes the "'hash' may be used uninitialized in this function" net/unix/af_unix.c:1041:20: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized] addr->hash = hash ^ sk->sk_type; Signed-off-by:
Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 6c404a68 ] We need to transfer device ownership to the CPU before we can manipulate the mapped data. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 3a5bd702 ] We can't just transfer ownership to the CPU and then unmap, as this will break with swiotlb. Instead unmap the command and sense buffer a little earlier in the I/O completion handler and get rid of the pci_dma_sync_sg_for_cpu call entirely. Signed-off-by:
-
Marcel Ziswiler authored
[ Upstream commit a85227da ] Similar to the following: commit 43217236 ("ASoC: tegra_alc5632: fix device_node refcounting") commit 7c5dfd54 ("ASoC: tegra: fix device_node refcounting") Signed-off-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit 4917fb90 ] A typo that makes it impossible to get the correct clocks for MMP2_CLK_SDH2 and MMP2_CLK_SDH3. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Fixes: 1ec770d9 ("clk: mmp: add mmp2 DT support for clock driver") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 20054597 ] Clang warns when one enumerated type is implicitly converted to another. drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from enumeration type 'enum iscsi_host_param' to different enumeration type 'enum iscsi_param' [-Wenum-conversion] &addr, param, buf); ^~~~~ 1 warning generated. iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine so add an explicit cast to iscsi_param to make it clear to Clang that this is expected behavior. Link: https://github.com/ClangBuiltLinux/linux/issues/153Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 362b5da3 ] Clang warns when an enumerated type is implicitly converted to another. drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from enumeration type 'enum sci_task_status' to different enumeration type 'enum sci_status' [-Wenum-conversion] status = sci_controller_start_task(ihost, ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from enumeration type 'enum sci_status' to different enumeration type 'enum sci_task_status' [-Wenum-conversion] return SCI_SUCCESS; ~~~~~~ ^~~~~~~~~~~ drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from enumeration type 'enum sci_status' to different enumeration type 'enum sci_task_status' [-Wenum-conversion] return status; ~~~~~~ ^~~~~~ Avoid all of these implicit conversion by just making sci_controller_start_task use sci_status. This silences Clang and has no functional change since sci_task_status has all of its values mapped to something in sci_status. Link: https://github.com/ClangBuiltLinux/linux/issues/153Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit e9e9a103 ] Clang warns when one enumerated type is implicitly converted to another. drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from enumeration type 'enum sci_io_status' to different enumeration type 'enum sci_status' [-Wenum-conversion] status = SCI_IO_FAILURE_RESPONSE_VALID; ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from enumeration type 'enum sci_io_status' to different enumeration type 'enum sci_status' [-Wenum-conversion] status = SCI_IO_FAILURE_RESPONSE_VALID; ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h file. Link: https://github.com/ClangBuiltLinux/linux/issues/153Signed-off-by:
-
Uros Bizjak authored
[ Upstream commit 5ebb272b ] Register operand size of invvpid and invept instruction in 64-bit mode has always 64 bits. Adjust inline function argument type to reflect correct size. Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 5d25ff7a ] Add missing break statement in order to prevent the code from falling through to case TEST_UNIT_READY. Addresses-Coverity-ID: 1357338 ("Missing break in switch") Suggested-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
