MD_RECOVERY_DONE is normally cleared by md_check_recovery after a
resync etc finished.  However it is possible for raid5_start_reshape
to race and start a reshape before MD_RECOVERY_DONE is cleared.  This
can lean to multiple reshapes running at the same time, which isn't
good.

To make sure it is cleared before starting a reshape, and also clear
it when reaping a thread, just to be safe.
Signed-off-by: NeilBrown  <neilb@suse.de>

Checking ->sync_thread without holding the mddev_lock()
isn't really safe, even after flushing the workqueue which
ensures md_start_sync() has been run.

While this code is waiting for the lock, md_check_recovery could reap
the thread itself, and then start another thread (e.g. recovery might
finish, then reshape starts).  When this thread gets the lock
md_start_sync() hasn't run so it doesn't get reaped, but
MD_RECOVERY_RUNNING gets cleared.  This allows two threads to start
which leads to confusion.

So don't both if MD_RECOVERY_RUNNING isn't set, but if it is do
the flush and the test and the reap all under the mddev_lock to
avoid any race with md_check_recovery.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Cc: stable@vger.kernel.org (v4.0+)

Returning zero from a 'store' function is bad.
The return value should be either len length of the string
or an error.

So use 'len' if 'err' is zero.

Fixes: 6791875e ("md: make reconfig_mutex optional for writes to md sysfs files.")
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel (v4.0+)

Pull vfs fix from Al Viro:
 "Off-by-one in d_walk()/__dentry_kill() race fix.

  It's very hard to hit; possible in the same conditions as the original
  bug, except that you need the skipped branch to contain all the
  remaining evictables, so that the d_walk()-calling loop in
  d_invalidate() decides there's nothing more to do and doesn't go for
  another pass - otherwise that next pass will sweep the sucker.

  So it's not too urgent, but seeing that the fix is obvious and the
  original commit has spread into all -stable branches..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  d_walk() might skip too much

Pull ARM fixes from Russell King:
 "Three fixes this time around:

   - fix a memory leak which occurs when probing performance monitoring
     unit interrupts

   - fix handling of non-PMD aligned end of RAM causing boot failures

   - fix missing syscall trace exit path with syscall tracing enabled
     causing a kernel oops in the audit code"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8357/1: perf: fix memory leak when probing PMU PPIs
  ARM: fix missing syscall trace exit
  ARM: 8356/1: mm: handle non-pmd-aligned end of RAM

Pull MIPS fixes from Ralf Baechle:
 "MIPS fixes for 4.1 all across the tree"

* 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux:
  MIPS: strnlen_user.S: Fix a CPU_DADDI_WORKAROUNDS regression
  MIPS: BMIPS: Fix bmips_wr_vec()
  MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not set
  MIPS: Fuloong 2E: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760
  MIPS: irq: Use DECLARE_BITMAP
  ttyFDC: Fix to use native endian MMIO reads
  MIPS: Fix CDMM to use native endian MMIO reads

Pull turbostat tool fixes from Len Brown:
 "Just one minor kernel dependency in this batch -- added a #define to
  msr-index.h"

* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: update version number to 4.7
  tools/power turbostat: allow running without cpu0
  tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS
  tools/power turbostat: enable turbostat to support Knights Landing (KNL)
  tools/power turbostat: correctly display more than 2 threads/core

Pull SCSI target fixes from Nicholas Bellinger:
 "These are mostly minor fixes, with the exception of the following that
  address fall-out from recent v4.1-rc1 changes:

   - regression fix related to the big fabric API registration changes
     and configfs_depend_item() usage, that required cherry-picking one
     of HCH's patches from for-next to address the issue for v4.1 code.

   - remaining TCM-USER -v2 related changes to enforce full CDB
     passthrough from Andy + Ilias.

  Also included is a target_core_pscsi driver fix from Andy that
  addresses a long standing issue with a Scsi_Host reference being
  leaked on PSCSI device shutdown"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iser-target: Fix error path in isert_create_pi_ctx()
  target: Use a PASSTHROUGH flag instead of transport_types
  target: Move passthrough CDB parsing into a common function
  target/user: Only support full command pass-through
  target/user: Update example code for new ABI requirements
  target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST
  target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem
  target: Drop signal_pending checks after interruptible lock acquire
  target: Add missing parentheses
  target: Fix bidi command handling
  target/user: Disallow full passthrough (pass_level=0)
  ISCSI: fix minor memory leak

Merge tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Some late hwmon patches, all headed for -stable

   - fix sysfs attribute initialization in nct6775 and nct6683 drivers

   - do not attempt to auto-detect tmp435 on I2C address 0x37

   - ensure iio channel is of type IIO_VOLTAGE in ntc_thermistor driver"

* tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (nct6683) Add missing sysfs attribute initialization
  hwmon: (nct6775) Add missing sysfs attribute initialization
  hwmon: (tmp401) Do not auto-detect chip on I2C address 0x37
  hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE

We don't assign pi_ctx to desc->pi_ctx until we're certain to succeed
in the function.  That means the cleanup path should use the local
pi_ctx variable, not desc->pi_ctx.

This was detected by Coverity (CID 1260062).
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

It seems like we only care if a transport is passthrough or not. Convert
transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a
flag, TRANSPORT_FLAG_PASSTHROUGH.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Aside from whether they handle BIDI ops or not, parsing of the CDB by
kernel and user SCSI passthrough modules should be identical. Move this
into a new passthrough_parse_cdb() and call it from tcm-pscsi and tcm-user.
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

After much discussion, give up on only passing a subset of SCSI commands
to userspace and pass them all. Based on what pscsi is doing, make sure
to set SCF_SCSI_DATA_CDB for I/O ops, and define attributes identical to
pscsi.

Make hw_block_size configurable via dev param.

Remove mention of command filtering from tcmu-design.txt.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

We now require that the userspace handler set a bit if the command is not
handled.

Update calls to tcmu_hdr_get_op for v2.
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

See https://bugzilla.redhat.com/show_bug.cgi?id=1025672

We need to put() the reference to the scsi host that we got in
pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with
the dev_virt, not the hba_virt.
Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

There is just one configfs subsystem in the target code, so we might as
well add two helpers to reference / unreference it from the core code
instead of passing pointers to it around.

This fixes a regression introduced for v4.1-rc1 with commit 9ac8928e,
where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would
fail, because the assignment from the original target_core_subsystem[]
is no longer happening at target_register_template() time.

(Fix target_core_exit_configfs pointer dereference - Sagi)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

The following error message is seen when loading the nct6683 driver
with DEBUG_LOCK_ALLOC enabled.

BUG: key ffff88040b2f0030 not in .data!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988
				lockdep_init_map+0x469/0x630()
DEBUG_LOCKS_WARN_ON(1)

Caused by a missing call to sysfs_attr_init() when initializing
sysfs attributes.
Reported-by: Alexey Orishko <alexey.orishko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

The following error message is seen when loading the nct6775 driver
with DEBUG_LOCK_ALLOC enabled.

BUG: key ffff88040b2f0030 not in .data!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988
				lockdep_init_map+0x469/0x630()
DEBUG_LOCKS_WARN_ON(1)

Caused by a missing call to sysfs_attr_init() when initializing
sysfs attributes.
Reported-by: Alexey Orishko <alexey.orishko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v3.12+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull PCI / ACPI fix from Rafael Wysocki:
 "This fixes a bug uncovered by a recent driver core change that
  modified the implementation of the ACPI_COMPANION_SET() macro to
  strictly rely on its second argument to be either NULL or a valid
  pointer to struct acpi_device.

  As it turns out, pcibios_root_bridge_prepare() on x86 and ia64 works
  with the assumption that the only code path calling pci_create_root_bus()
  is pci_acpi_scan_root() and therefore the sysdata argument passed to
  it will always match the expectations of pcibios_root_bridge_prepare().

  That need not be the case, however, and in particular it is not the
  case for the Xen pcifront driver that passes a pointer to its own
  private data strcture as sysdata to pci_scan_bus_parented() which then
  passes it to pci_create_root_bus() and it ends up being used incorrectly
  by pcibios_root_bridge_prepare()"

* tag 'acpi-pci-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI / ACPI: Do not set ACPI companions for host bridges with parents

Pull xfs fixes from Dave Chinner:
 "This is a little larger than I'd like late in the release cycle, but
  all the fixes are for regressions introduced in the 4.1-rc1 merge, or
  are needed back in -stable kernels fairly quickly as they are
  filesystem corruption or userspace visible correctness issues.

  Changes in this update:

   - regression fix for new rename whiteout code

   - regression fixes for new superblock generic per-cpu counter code

   - fix for incorrect error return sign introduced in 3.17

   - metadata corruption fixes that need to go back to -stable kernels"

* tag 'xfs-for-linus-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: fix broken i_nlink accounting for whiteout tmpfile inode
  xfs: xfs_iozero can return positive errno
  xfs: xfs_attr_inactive leaves inconsistent attr fork state behind
  xfs: extent size hints can round up extents past MAXEXTLEN
  xfs: inode and free block counters need to use __percpu_counter_compare
  percpu_counter: batch size aware __percpu_counter_compare()
  xfs: use percpu_counter_read_positive for mp->m_icount

Pull ARM SoC fixes from Arnd Bergmann:
 "Two weeks worth of small bug fixes this time, nothing sticking out
  this time:

   - one defconfig change to adapt to a modified Kconfig symbol

   - two fixes for i.MX for backwards compatibility with older DT files
     that was accidentally broken

   - one regression fix for irq handling on pxa

   - three small dt files on omap, and one each for imx and exynos"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760
  ARM: imx6: gpc: don't register power domain if DT data is missing
  ARM: imx6: allow booting with old DT
  ARM: dts: set display clock correctly for exynos4412-trats2
  ARM: pxa: pxa_cplds: signedness bug in probe
  ARM: dts: Fix WLAN interrupt line for AM335x EVM-SK
  ARM: dts: omap3-devkit8000: Fix NAND DT node
  ARM: dts: am335x-boneblack: disable RTC-only sleep
  ARM: dts: fix imx27 dtb build rule
  ARM: dts: imx27: only map 4 Kbyte for fec registers

Pull device-mapper fixes from Mike Snitzer:
 "Quite a few fixes for DM's blk-mq support thanks to extra DM multipath
  testing from Junichi Nomura and Bart Van Assche.

  Also fix a casting bug in dm_merge_bvec() that could cause only a
  single page to be added to a bio (Joe identified this while testing
  dm-cache writeback)"

* tag 'dm-4.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix casting bug in dm_merge_bvec()
  dm: fix reload failure of 0 path multipath mapping on blk-mq devices
  dm: fix false warning in free_rq_clone() for unmapped requests
  dm: requeue from blk-mq dm_mq_queue_rq() using BLK_MQ_RQ_QUEUE_BUSY
  dm mpath: fix leak of dm_mpath_io structure in blk-mq .queue_rq error path
  dm: fix NULL pointer when clone_and_map_rq returns !DM_MAPIO_REMAPPED
  dm: run queue on re-queue

I2C address 0x37 may be used by EEPROMs, which can result in false
positives. Do not attempt to detect a chip at this address.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Merge misc fixes from Andrew Morton:
 "10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  scripts/gdb: fix lx-lsmod refcnt
  omfs: fix potential integer overflow in allocator
  omfs: fix sign confusion for bitmap loop counter
  omfs: set error return when d_make_root() fails
  fs, omfs: add NULL terminator in the end up the token list
  MAINTAINERS: update CAPABILITIES pattern
  fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappings
  tracing/mm: don't trace mm_page_pcpu_drain on offline cpus
  tracing/mm: don't trace mm_page_free on offline cpus
  tracing/mm: don't trace kmem_cache_free on offline cpus

Pull fixes for cpumask and modules from Rusty Russell:
 "** NOW WITH TESTING! **

  Two fixes which got lost in my recent distraction.  One is a weird
  cpumask function which needed to be rewritten, the other is a module
  bug which is cc:stable"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  cpumask_set_cpu_local_first => cpumask_local_spread, lament
  module: Call module notifier on failure after complete_formation()

Correct a regression introduced with 8453eebd [MIPS: Fix strnlen_user()
return value in case of overlong strings.] causing assembler warnings
and broken code generated in __strnlen_kernel_nocheck_asm:

arch/mips/lib/strnlen_user.S: Assembler messages:
arch/mips/lib/strnlen_user.S:64: Warning: Macro instruction expanded into multiple instructions in a branch delay slot

with the CPU_DADDI_WORKAROUNDS option set, resulting in the function
looping indefinitely upon mounting NFS root.

Use conditional assembly to avoid a microMIPS code size regression.
Using $at unconditionally would cause such a regression as there are no
16-bit instruction encodings available for ALU operations using this
register.  Using $v1 unconditionally would produce short microMIPS
encodings, but would prevent this register from being used across calls
to this function.

The extra LI operation introduced is free, replacing a NOP originally
scheduled into the delay slot of the branch that follows.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10205/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

bmips_wr_vec() copies exception vector code from start to dst.

The call to dma_cache_wback() needs to flush (end-start) bytes,
starting at dst, from write-back cache to memory.
Signed-off-by: Petri Gynther <pgynther@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kevin Cernekee <cernekee@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10193/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

initrd_start is defined in init/do_mounts_initrd.c, which is only
included in kernel if CONFIG_BLK_DEV_INITRD=y.
Signed-off-by: Laurent Fasnacht <l@libres.ch>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10198/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull drm fixes from Dave Airlie:
 "This is made up 4 groups of fixes detailed below.

  vgem:
      Due to some misgivings about possible bad use cases this allow,
      backout a chunk of the interface to stop those use cases for now.

  radeon:
      Fix for an oops regression in the audio code, and a partial revert
      for a fix that was cauing problems.

  nouveau:
      regression fix for Fermi, and display-less Maxwell boot fixes.

  drm core:
      a fix for i915 cursor vblank waiting in the atomic helpers"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/gr/gm204: remove a stray printk
  drm/nouveau/devinit/gm100-: force devinit table execution on boards without PDISP
  drm/nouveau/devinit/gf100: make the force-post condition more obvious
  drm/nouveau/gr/gf100-: fix wrong constant definition
  drm/radeon: partially revert "fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling"
  drm/radeon/audio: make sure connector is valid in hotplug case
  Revert "drm/radeon: only mark audio as connected if the monitor supports it (v3)"
  drm/radeon: don't share plls if monitors differ in audio support
  drm/vgem: drop DRIVER_PRIME (v2)
  drm/plane-helper: Adapt cursor hack to transitional helpers

Pull sound fixes from Takashi Iwai:
 "No big surprise here, just a bunch of small fixes for HD-audio and
  USB-audio:

   - partial revert of widget power-saving for IDT codecs
   - revert mute-LED enum ctl for Thinkpads due to confusion
   - a quirk for a new Radeon HDMI controller
   - Realtek codec name fix for Dell
   - a workaround for headphone mic boost on some laptops
   - stream_pm ops setup (and its fix for regression)
   - another quirk for MS LifeCam USB-audio"

* tag 'sound-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix lost sound due to stream_pm ops cleanup
  ALSA: hda - Disable Headphone Mic boost for ALC662
  ALSA: hda - Disable power_save_node for IDT92HD71bxx
  ALSA: hda - Fix noise on AMD radeon 290x controller
  ALSA: hda - Set stream_pm ops automatically by generic parser
  ALSA: hda/realtek - Add ALC256 alias name for Dell
  Revert "ALSA: hda - Add mute-LED mode control to Thinkpad"
  ALSA: usb-audio: Add quirk for MS LifeCam HD-3000

dm_merge_bvec() was originally added in f6fccb ("dm: introduce
merge_bvec_fn").  In that commit a value in sectors is converted to
bytes using << 9, and then assigned to an int.  This code made
assumptions about the value of BIO_MAX_SECTORS.

A later commit 148e51 ("dm: improve documentation and code clarity in
dm_merge_bvec") was meant to have no functional change but it removed
the use of BIO_MAX_SECTORS in favor of using queue_max_sectors().  At
this point the cast from sector_t to int resulted in a zero value.  The
fallout being dm_merge_bvec() would only allow a single page to be added
to a bio.

This interim fix is minimal for the benefit of stable@ because the more
comprehensive cleanup of passing a sector_t to all DM targets' merge
function will impact quite a few DM targets.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.19+

dm-multipath accepts 0 path mapping.

  # echo '0 2097152 multipath 0 0 0 0' | dmsetup create newdev

Such a mapping can be used to release underlying devices while still
holding requests in its queue until working paths come back.

However, once the multipath device is created over blk-mq devices,
it rejects reloading of 0 path mapping:

  # echo '0 2097152 multipath 0 0 1 1 queue-length 0 1 1 /dev/sda 1' \
      | dmsetup create mpath1
  # echo '0 2097152 multipath 0 0 0 0' | dmsetup load mpath1
  device-mapper: reload ioctl on mpath1 failed: Invalid argument
  Command failed

With following kernel message:
  device-mapper: ioctl: can't change device type after initial table load.

DM tries to inherit the current table type using dm_table_set_type()
but it doesn't work as expected because of unnecessary check about
whether the target type is hybrid or not.

Hybrid type is for targets that work as either request-based or bio-based
and not required for blk-mq or non blk-mq checking.

Fixes: 65803c20 ("dm table: train hybrid target type detection to select blk-mq if appropriate")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull m,ore md bugfixes gfrom Neil Brown:
 "Assorted fixes for new RAID5 stripe-batching functionality.

  Unfortunately this functionality was merged a little prematurely.  The
  necessary testing and code review is now complete (or as complete as
  it can be) and to code passes a variety of tests and looks quite
  sensible.

  Also a fix for some recent locking changes - a race was introduced
  which causes a reshape request to sometimes fail.  No data safety
  issues"

* tag 'md/4.1-rc5-fixes' of git://neil.brown.name/md:
  md: fix race when unfreezing sync_action
  md/raid5: break stripe-batches when the array has failed.
  md/raid5: call break_stripe_batch_list from handle_stripe_clean_event
  md/raid5: be more selective about distributing flags across batch.
  md/raid5: add handle_flags arg to break_stripe_batch_list.
  md/raid5: duplicate some more handle_stripe_clean_event code in break_stripe_batch_list
  md/raid5: remove condition test from check_break_stripe_batch_list.
  md/raid5: Ensure a batch member is not handled prematurely.
  md/raid5: close race between STRIPE_BIT_DELAY and batching.
  md/raid5: ensure whole batch is delayed for all required bitmap updates.

When stacking request-based dm device on non blk-mq device and
device-mapper target could not map the request (error target is used,
multipath target with all paths down, etc), the WARN_ON_ONCE() in
free_rq_clone() will trigger when it shouldn't.

The warning was added by commit aa6df8dd ("dm: fix free_rq_clone() NULL
pointer when requeueing unmapped request").  But free_rq_clone() with
clone->q == NULL is valid usage for the case where
dm_kill_unmapped_request() initiates request cleanup.

Fix this false warning by just removing the WARN_ON -- it only generated
false positives and was never useful in catching the intended case
(completing clone request not being mapped e.g. clone->q being NULL).

Fixes: aa6df8dd ("dm: fix free_rq_clone() NULL pointer when requeueing unmapped request")
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Since commit 100832ab ("usb: isp1760: Make HCD support
optional"), CONFIG_USB_ISP1760_HCD is automatically selected when
needed.  Enabling that option in the defconfig is now a no-op, and no
longer enables ISP1760 HCD support.

Re-enable the ISP1760 driver in the defconfig by enabling
USB_ISP1760_HOST_ROLE instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-fixes-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

Merge "The i.MX fixes for 4.1, 3rd round" from Shawn Guo:

It includes a couple of fixes for i.MX6 GPC code to let the new kernel
be able to boot with old DTBs:

 - Booting v4.1-rc kernel with old DTBs will fail with a fat warning
   (require low-level debug to be seen), due to the adoption of stacked
   IRQ domain.  The first fix improves the situation by allowing kernel
   boot up with old DTBs, although suspend/resume still breaks.

 - Booting new kernel with old DTBs that do not have power-domain info
   will result in a hang.  The second patch fixes the hang by skipping
   the kernel power-domain registration if DTB has no power-domain info.

* tag 'imx-fixes-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx6: gpc: don't register power domain if DT data is missing
  ARM: imx6: allow booting with old DT

Merge tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

Merge "Samsung fix for v4.1" from Kukjin Kim:

- Set display clock correctly for exynos4412-trats2
  : fix the following error

    exynos-drm: No connectors reported connected with modes
    [drm] Cannot find any crtc or sizes - going 1024x768

* tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: set display clock correctly for exynos4412-trats2

The commit [49fb1897: ALSA: hda - Set stream_pm ops automatically
by generic parser] resulted in regressions on some Realtek and VIA
codecs because these drivers set patch_ops after calling the generic
parser, thus stream_pm got cleared to NULL again.  I haven't noticed
since I tested with IDT codec.

Restore (partial revert) the stream_pm ops for them to fix the
regression.

Fixes: 49fb1897 ('ALSA: hda - Set stream_pm ops automatically by generic parser')
Reported-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

when we find that a child has died while we'd been trying to ascend,
we should go into the first live sibling itself, rather than its sibling.

Off-by-one in question had been introduced in "deal with deadlock in
d_walk()" and the fix needs to be backported to all branches this one
has been backported to.

Cc: stable@vger.kernel.org # 3.2 and later
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>