- 09 Aug, 2017 30 commits
-
-
Derek Chickles authored
Fix misspelled firmware image filenames advertised via MODULE_FIRMWARE(). Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mickaël Salaün authored
The function check_uarg_tail_zero() was created from bpf(2) for BPF_OBJ_GET_INFO_BY_FD without taking the access_ok() nor the PAGE_SIZE checks. Make this checks more generally available while unlikely to be triggered, extend the memory range check and add an explanation including why the ToCToU should not be a security concern. Signed-off-by:
Mickaël Salaün <mic@digikod.net> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Kees Cook <keescook@chromium.org> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lkml.kernel.org/r/CAGXu5j+vRGFvJZmjtAcT8Hi8B+Wz0e1b6VKYZHfQP_=DXzC4CQ@mail.gmail.comSigned-off-by:
-
Mickaël Salaün authored
The function check_uarg_tail_zero() may be useful for other part of the code in the syscall.c file. Move this function at the beginning of the file. Signed-off-by:
-
stephen hemminger authored
Go back to switching datapath directly in the notifier callback. Otherwise datapath might not get switched on unregister. No need for calling the NOTIFY_PEERS notifier since that is only for a gratitious ARP/ND packet; but that is not required with Hyper-V because both VF and synthetic NIC have the same MAC address. Reported-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Fixes: 0c195567 ("netvsc: transparent VF management") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Intiyaz Basha authored
Information reported to ethtool about vf rx/tx ring parameters is wrong. Fix it by adding the missing initializations. Signed-off-by:
Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== bpf: rewrite value tracking in verifier This series simplifies alignment tracking, generalises bounds tracking and fixes some bounds-tracking bugs in the BPF verifier. Pointer arithmetic on packet pointers, stack pointers, map value pointers and context pointers has been unified, and bounds on these pointers are only checked when the pointer is dereferenced. Operations on pointers which destroy all relation to the original pointer (such as multiplies and shifts) are disallowed if !env->allow_ptr_leaks, otherwise they convert the pointer to an unknown scalar and feed it to the normal scalar arithmetic handling. Pointer types have been unified with the corresponding adjusted-pointer types where those existed (e.g. PTR_TO_MAP_VALUE[_ADJ] or FRAME_PTR vs PTR_TO_STACK); similarly, CONST_IMM and UNKNOWN_VALUE have been unified into SCALAR_VALUE. Pointer types (except CONST_PTR_TO_MAP, PTR_TO_MAP_VALUE_OR_NULL and PTR_TO_PACKET_END, which do not allow arithmetic) have a 'fixed offset' and a 'variable offset'; the former is used when e.g. adding an immediate or a known-constant register, as long as it does not overflow. Otherwise the latter is used, and any operation creating a new variable offset creates a new 'id' (and, for PTR_TO_PACKET, clears the 'range'). SCALAR_VALUEs use the 'variable offset' fields to track the range of possible values; the 'fixed offset' should never be set on a scalar. ==================== Acked-by:
-
Edward Cree authored
The more detailed value tracking can reduce the effectiveness of pruning for some programs. So, to avoid rejecting previously valid programs, up the limit to 128kinsns. Hopefully we will be able to bring this back down later by improving pruning performance. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
Also bring the eBPF documentation up to date in other ways. Signed-off-by:
-
Edward Cree authored
Variable ctx accesses and stack accesses aren't allowed, because we can't determine what type of value will be read. Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
Edward Cree authored
A number of selftests fell foul of the changed MAX_PACKET_OFF handling. For instance, "direct packet access: test2" was potentially reading four bytes from pkt + 0xffff, which could take it past the verifier's limit, causing the program to be rejected (checks against pkt_end didn't give us any reg->range). Increase the shifts by one so that R2 is now mask 0x7fff instead of mask 0xffff. Signed-off-by:
-
Edward Cree authored
Tests non-add/sub operations (AND, LSH) on pointers decaying them to unknown scalars. Also tests that a pkt_ptr add which could potentially overflow is rejected (find_good_pkt_pointers ignores it and doesn't give us any reg->range). Signed-off-by:
-
Edward Cree authored
New test adds 14 to the unknown value before adding to the packet pointer, meaning there's no 'fixed offset' field and instead we add into the var_off, yielding a '4n+2' value. Signed-off-by:
-
Edward Cree authored
Expectations have changed, as has the format of the logged state. To make the tests easier to read, add a line-matching framework so that each match need only quote the register it cares about. (Multiple matches may refer to the same line, but matches must be listed in order of increasing line.) Signed-off-by:
-
Edward Cree authored
Some of the verifier's error messages have changed, and some constructs that previously couldn't be verified are now accepted. Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
Edward Cree authored
Allows us to, sometimes, combine information from a signed check of one bound and an unsigned check of the other. We now track the full range of possible values, rather than restricting ourselves to [0, 1<<30) and considering anything beyond that as unknown. While this is probably not necessary, it makes the code more straightforward and symmetrical between signed and unsigned bounds. Signed-off-by:
-
Edward Cree authored
Unifies adjusted and unadjusted register value types (e.g. FRAME_POINTER is now just a PTR_TO_STACK with zero offset). Tracks value alignment by means of tracking known & unknown bits. This also replaces the 'reg->imm' (leading zero bits) calculations for (what were) UNKNOWN_VALUEs. If pointer leaks are allowed, and adjust_ptr_min_max_vals returns -EACCES, treat the pointer as an unknown scalar and try again, because we might be able to conclude something about the result (e.g. pointer & 0x40 is either 0 or 0x40). Verifier hooks in the netronome/nfp driver were changed to match the new data structures. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Fix checkpatch.pl error: ERROR: space prohibited before open square bracket '['. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by:
-
- 07 Aug, 2017 10 commits
-
-
David Ahern authored
Add extack error messages for failure paths creating vrf devices. Once extack support is added to iproute2, we go from the unhelpful: $ ip li add foobar type vrf RTNETLINK answers: Invalid argument to: $ ip li add foobar type vrf Error: VRF table id is missing Signed-off-by:David Ahern <dsahern@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Declare this structure as const as it is only used during a copy operation. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
David S. Miller authored
Arkadi Sharshevsky says: ==================== Update DSA's FDB API and perform switchdev cleanup The patchset adds support for configuring static FDB entries via the switchdev notification chain. The current method for FDB configuration uses the switchdev's bridge bypass implementation. In order to support this legacy way and to perform the switchdev cleanup, the implementation is moved inside DSA. The DSA drivers cannot sync the software bridge with hardware learned entries and use the switchdev's implementation of bypass FDB dumping. Because they are the only ones using this functionality, the fdb_dump implementation is moved from switchdev code into DSA. Finally after this changes a major cleanup in switchdev can be done. Please see individual patches for patch specific change logs. v1->v2 - Split MDB/vlan dump removal into core/driver removal. v2->v3 - The self implementation for FDB add/del is moved inside DSA. ==================== Tested-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arkadi Sharshevsky authored
Currently the bridge port flags, vlans, FDBs and MDBs can be offloaded through the bridge code, making the switchdev's SELF bridge bypass implementation to be redundant. This implies several changes: - No need for dump infra in switchdev, DSA's special case is handled privately. - Remove obj_dump from switchdev_ops. - FDBs are removed from obj_add/del routines, due to the fact that they are offloaded through the bridge notification chain. - The switchdev_port_bridge_xx() and switchdev_port_fdb_xx() functions can be removed. Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
-
Arkadi Sharshevsky authored
At this point no driver supports FDB add/del through switchdev object but rather via notification chain, thus, it is removed. Signed-off-by:
-
Arkadi Sharshevsky authored
>From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by:
-
Arkadi Sharshevsky authored
Currently the MDB HW database is synced with the bridge's one, thus, There is no need to support special dump functionality. Signed-off-by:
-
Arkadi Sharshevsky authored
This is done as a preparation before removing support for MDB dump from DSA core. The MDBs are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by:
-
Arkadi Sharshevsky authored
The bridge port attributes/vlan for DSA devices should be set only from bridge code. Furthermore, The vlans are synced totally with the bridge so there is no need for special dump support. Signed-off-by:
-
Arkadi Sharshevsky authored
This is done as a preparation before removing support for vlan dump from DSA core. The vlans are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by:
-
