- 28 Jun, 2018 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.19: Cross-subsystem Changes: devicetree documentation dt-bindings defintions for sun8i (Jernej Skrabec) Core Changes: Consider drivers setting DRIVER_ATOMIC as atomic (Eric Anholt) Improvements for in-kernel clients (Noralf Trønnes) Export and rename drm_crtc_port_mask() (Jernej Skrabec) Driver Changes: v3d: Add looking for GPU scheduler jobs management (Eric Anholt) Add Ilitek ILI9881c panel driver(Maxime Ripard) rockchip: vop: fixup linebuffer mode calc error (Sandy Huang) tinydrm: new driver for ILI9341 display panels (David Lechner) sun4i: Add TCON TOP driver (Jernej Skrabec) Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628010018.GA10929@juma
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Chris is doing many reworks that allow us to get full-ppgtt supported on all platforms back to HSW. As well many other fix and improvements, Including: - Use GEM suspend when aborting initialization (Chris) - Change i915_gem_fault to return vm_fault_t (Chris) - Expand VMA to Non gem object entities (Chris) - Improve logs for load failure, but quite logging on fault injection to avoid noise on CI (Chris) - Other page directory handling fixes and improvements for gen6 (Chris) - Other gtt clean-up removing redundancies and unused checks (Chris) - Reorder aliasing ppgtt fini (Chris) - Refactor of unsetting obg->mm.pages (Chris) - Apply batch location restrictions before pinning (Chris) - Ringbuffer fixes for context restore (Chris) - Execlist fixes on freeing error pointer on allocation error (Chris) - Make closing request flush mandatory (Chris) - Move GEM sanitize from resume_early to resume (Chris) - Improve debug dumps (Chris) - Silent compiler for selftest (Chris) - Other execlists changes to improve hangcheck and reset. - Many gtt page directory fixes and improvements (Chris) - Reorg context workarounds (Chris) - Avoid ERR_PTR dereference on selftest (Chris) Other GEM related work: - Stop trying to reset GPU if reset failed (Mika) - Add HW workaround for KBL to fix GPU reset (Mika) - Fix context ban and hang accounting for client (Mika) - Fixes on OA perf (Michel, Jani) - Refactor on GuC log mechanisms (Piotr) - Enable provoking vertex fix on Gen9 system (Kenneth) More ICL patches for Display enabling: - ICL - 10-bit support for HDMI (RK) - ICL - Start adding TBT PLL (Paulo) - ICL - DDI HDMK level selection (Manasi) - ICL - GMBUS GPIO pin mapping fix (Mahesh) - ICL - Adding DP_AUX_E support (James) - ICL - Display interrupts handling (DK) Other display fixes and improvements: - Fix sprite destination color keying on SKL+ (Ville) - Fixes and improvements on PCH detection, specially for non PCH systems (Jani) - Document PCH_NOP (Lucas) - Allow DBLSCAN user modes with eDP/LVDS/DSI (Ville) - Opregion and ACPI cleanup and organization (Jani) - Kill delays when activation psr (Rodrigo) - ...and a consequent fix of the psr activation flow (DK) - Fix HDMI infoframe setting (Imre) - Fix Display interrupts and modes on old gens (Ville) - Start switching to kernel unsigned int types (Jani) - Introduction to Amber Lake and Whiskey Lake platforms (Jose) - Audio clock fixes for HBR3 (RK) - Standardize i915_reg.h definitions according to our doc and checkpatch (Paulo) - Remove unused timespec_to_jiffies_timeout function (Arnd) - Increase the scope of PSR wake fix for other VBTs out there (Vathsala) - Improve debug msgs with prop name/id (Ville) - Other clean up on unecessary cursor size defines (Ville) - Enforce max hdisplay/hblank_start limits on HSW/BDW (Ville) - Make ELD pointers constant (Jani) - Fix for PSR VBT parse (Colin) - Add warn about unsupported CDCLK rates (Imre) Signed-off-by:
-
- 27 Jun, 2018 24 commits
-
-
Jernej Skrabec authored
drm_of_find_possible_crtcs() doesn't work when DW HDMI encoder is connected to TCON (crtc) through mux in TCON TOP. In that case TCON TOP HDMI mux input port has to be manually traversed and checked if it matches any known crtc. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-23-jernej.skrabec@siol.net
-
Jernej Skrabec authored
Function is useful when drm_of_find_possible_crtcs() can't be used and custom parsing is needed. This can happen for example when there is a node with multiple muxes between crtc and encoder. Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Jernej Skrabec authored
PHY is the same as in H3, except it can switch between two clock parents. Signed-off-by:
-
Jernej Skrabec authored
Expand HDMI PHY clock driver to support second clock parent. Signed-off-by:
-
Jernej Skrabec authored
Some DW HDMI PHYs, like those found in A64 and R40 SoCs, can select between two clock parents. Add code which reads second PLL from DT. Signed-off-by:
-
Jernej Skrabec authored
DW HDMI PHY driver and PHY clock driver share same registers. Make sure that DW HDMI PHY setup code doesn't change any clock related bits. During initialization, set PHY PLL parent bit to 0. Signed-off-by:
-
Jernej Skrabec authored
Current DW HDMI PHY code never prepares and enables PHY clock after it is created. It's just used as it is. This may work in some cases, but it's clearly wrong. Fix it by adding proper calls to enable/disable PHY clock. Fixes: 4f86e817 ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by:
-
Jernej Skrabec authored
A64 HDMI PHY is similar to H3 HDMI PHY except it has two possible PLL clock parents. It is compatible to other HDMI PHYs, like that found in R40. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jernej Skrabec authored
Both mixers have similar capabilities as others SoCs with DE2. First mixer has 1 VI and 3 UI planes and supports HW scaling on all planes. Second mixer has 1 VI and 1 UI planes and also supports HW scaling on all planes. Signed-off-by:
-
Jernej Skrabec authored
TV TCONs are always connected to TV or HDMI encoder, so it doesn't make sense to check if panel or bridge is connected to them. Check if TCON has channel 0 and only then check for connected panel or bridges. Signed-off-by:
-
Jernej Skrabec authored
LVDS and RGB interfaces are always connected to TCONs which have channel 0. It doesn't make sense to try to init them on TV TCONs. Add a check if TCON has channel 0 before trying to init LVDS or RGB interface. Signed-off-by:
-
Jernej Skrabec authored
Current "old" method to find engine worked pretty well for DE2. However, it doesn't work when TCON TOP is between mixer (engine) and TCON. TCON TOP has multiple input ports, but current engine search algorithm expects only one. This can be fixed by first looking for output port id and selecting matching input by subtracting 1 for the next round. This work even if there is only one input and output. Signed-off-by:
-
Jernej Skrabec authored
TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. Because of that, all output endpoints on such TCON node will point to a encoder which is part of component framework. Correct current graph traversing algorithm in such way that it doesn't skip output enpoints with id 0 on TV TCONs. Signed-off-by:
-
Jernej Skrabec authored
TCON TOP is different from other nodes in graph by having 3 input and 3 output ports. Additionally, connection to TV TCON might lead back to HDMI mux input port, creating loops. Add support for traversing such graph. Signed-off-by:
-
Jernej Skrabec authored
Until now, each node has one input port and one output port. However, with TCON TOP this is no longer true. It has 3 input and 3 output ports. In order to prepare to this situation, split out the code which checks all endpoints in input port and adds available components to fifo. This patch doesn't do any functional change. Signed-off-by:
-
Jernej Skrabec authored
sun4i_drv_add_endpoints() has a memory leak since it uses of_node_put() when remote is equal to NULL and does nothing when remote has a valid pointer. Invert the logic to fix memory leak. Signed-off-by:
-
Jernej Skrabec authored
As already described in DT binding, TCON TOP is responsible for configuring display pipeline. In this initial driver focus is on HDMI pipeline, so TVE and LCD configuration is not implemented. Implemented features: - HDMI source selection - clock driver (TCON and DSI gating) - connecting mixers and TCONS Something similar also existed in previous SoCs, except that it was part of first TCON. Signed-off-by:
-
Jernej Skrabec authored
TCON TOP main purpose is to configure whole display pipeline. It determines relationships between mixers and TCONs, selects source TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder clock source and contains additional TV TCON and DSI gates. Reviewed-by:
-
David Lechner authored
This adds a new driver for display panels that use the Ilitek ILI9341 controller. It currently supports a single display panel, namely the YX240QV29-T (e.g. Adafruit 2.4" TFT). The init sequence is from the Adafruit Python library for the ILI9341 controller. https://github.com/adafruit/Adafruit_Python_ILI9341Signed-off-by:
David Lechner <david@lechnology.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-5-david@lechnology.com
-
David Lechner authored
This adds a new binding for Ilitek ILI9341 display panels. It includes a compatible string for one display (more can be added in the future). The YX240QV29-T panel[1] is found, for example, in an Adafruit breakout board[2] and in Mindsensors' PiStorms[3]. The vendor prefix "adafruit" is used because the actual vendor is not known, but Adafruit is the most common source for a product that contains this panel. [1]: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf [2]: https://www.adafruit.com/product/2478 [3]: http://www.mindsensors.com/stem-with-robotics/13-pistorms-v2-base-kit-raspberry-pi-brain-for-lego-robotSigned-off-by:
-
David Lechner authored
This adds a device tree vendor prefix for Adafruit Industries, LLC. Signed-off-by:
-
David Lechner authored
This fixes the path to the ilitek,ili9225 device tree binding file. Signed-off-by:
-
Sandy Huang authored
linebuffer mode should be LB_YUV_3840X5 when width is bigger than 1280 in yuv mode. Separate yuv and rgb case makes the scl_vop_cal_lb_mode() logic clearer. Signed-off-by:
Sandy Huang <hjc@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1530001004-25036-1-git-send-email-hjc@rock-chips.com
-
Ville Syrjälä authored
Use drm_crtc_mask() where appropriate. Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
- 26 Jun, 2018 3 commits
-
-
Gustavo A. R. Silva authored
Fix the following compile warning: warning: unused variable ‘psbfb’ [-Wunused-variable] struct psb_framebuffer *psbfb = to_psb_fb(fb); Fixes: c7cbed56 ("drm/gma500: Fix Medfield for drm_framebuffer move") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
fb is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after fb has been properly null checked at line 74: if (!fb) Addresses-Coverity-ID: 1470169 ("Dereference before null check") Signed-off-by: -
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
Thomas Zimmermann <contact@tzimmermann.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180625152148.29555-1-contact@tzimmermann.org
-
- 25 Jun, 2018 7 commits
-
-
Maxime Ripard authored
The LHR050H41 panel is the panel shipped with the BananaPi M2-Magic, and is based on the Ilitek ILI9881c Controller. Add a driver for it, modelled after the other Ilitek controller drivers. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Maxime Ripard authored
The LHR050H41 from BananaPi is a 1280x700 4-lanes DSI panel based on the ILI9881c from Ilitek. Acked-by:
-
John Stultz authored
The driver doesn't support scaling, but when an atomic test is done it repeatedly spits out this warning which isn't particularly useful. So just remove the error message. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Peter Griffin <peter.griffin@linaro.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Noralf Trønnes authored
Make ioctl wrappers for functions that will be used by the in-kernel API. The following functions are touched: - drm_mode_create_dumb_ioctl() - drm_mode_destroy_dumb_ioctl() - drm_mode_addfb() - drm_mode_rmfb() Signed-off-by:
-
Noralf Trønnes authored
It only makes sense for userspace clients. Signed-off-by:
-
David Herrmann authored
Rather than doing drm_file allocation/destruction right in the fops, lets provide separate helpers. This decouples drm_file management from the still-mandatory drm-fops. It prepares for use of drm_file without the fops, both by possible separate fops implementations and APIs (not that I am aware of any such plans), and more importantly from in-kernel use where no real file is available. Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Christian König authored
Some functions are unused after removal of the kmap_atomic DMA-buf interface. Signed-off-by:
Christian König <christian.koenig@amd.com> Fixes: f664a526 ("dma-buf: remove kmap_atomic interface") Link: https://patchwork.freedesktop.org/series/45245/Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
- 22 Jun, 2018 4 commits
-
-
Eric Anholt authored
Drivers such as vc4 don't initialize mode_config.funcs until later in initialization, but we know they're atomic since they've got the flag set. This avoids oopsing on dereferencing funcs in the new atomic methods sanity checks. I moved the atomic check function down below the core flag check, to avoid needing a prototype. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: ba1f665f ("drm: Add checks for atomic_[duplicate/destroy]_state with atomic drivers") Link: https://patchwork.freedesktop.org/patch/msgid/20180621195428.17447-1-eric@anholt.netReviewed-by:
-
Christian König authored
Some functions are unused after removal of the kmap_atomic DMA-buf interface. Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
First feature request for 4.19. Highlights: - Add initial amdgpu documentation - Add initial GPU scheduler documention - GPU scheduler fixes for dying processes - Add support for the JPEG engine on VCN - Switch CI to use powerplay by default - EDC support for CZ - More powerplay cleanups - Misc DC fixes Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.19: UAPI Changes: - Add writeback connector (Brian Starkey/Liviu Dudau) - Add "content type" property to HDMI connectors (Stanislav Lisovskiy) Cross-subsystem Changes: - some devicetree Docs update - fix compile breakage on ION due to the dma-buf cleanups (Christian König) Core Changes: - Reject over-sized allocation requests early (Chris Wilson) - gem-fb-helper: Always do implicit sync (Daniel Vetter) - dma-buf cleanups (Christian König) Driver Changes: - Fixes for the otm8009a panel driver (Philippe Cornu) - Add Innolux TV123WAM panel driver support (Sandeep Panda) - Move GEM BO to drm_framebuffer in few drivers (Daniel Stone) - i915 pinning improvements (Chris Wilson) - Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä) Signed-off-by:
-
