into nuts.davemloft.net:/disk1/BK/net-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from David Vrabel

Use some #define'd constants in the ixp4xx's arch_reset().

Signed-off-by: David Vrabel
Signed-off-by: Russell King

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Use netdev_priv() and get rid of the PRIV() macro by using the correct
data element. Also eliminate casts, where type is correct.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

When the skfddi driver was converted to the new PCI netdevice interface,
it never got tested with real hardware. The initialization got broken, this
should fix it.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Fixes instances where gfar_read() was invoked in debug codewith a value,
rather than a pointer.
Signed-of-by: Andy Fleming <afleming@freescale.com>
Signed-of-by: Kumar Gala <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

From: Steven Rostedt <rostedt@goodmis.org>

If the transmit buffer of the e100 overflowed, then the system would hang.
This was caused because the e100 driver would stop the queue, and
netpoll_send_pkt in netpoll.c would then loop forever.  This is because the
e100 net_poll would never start the queue again after the transmits have
completed.

For those that use the e100 and netconsole, all you need to do is a sysreq
't' to lock up the system.
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Fixes breakage in getting MAC address on built-in tulip in
alphastation 200 - without delay we are skipping bytes.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This patch adds the Intel ICH7R DID's to the ahci.c SATA AHCI driver
for ICH7R SATA support.
Signed-off-by:  Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into silver.ucw.cz:/home/vojtech/bk/dmitry

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       changing HID->event mappings (via EVIOCS*) in the future and make 
       debugging easier now.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       rebooting.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>

       good idea to discard any character other than ACK/NAK during probe
       it causes missing releases and keys getting "stuck" when a command
       issued on enabled device. The effect is easily demonstrated with
       the following command:
           while true; do xset led 3; xset -led 3; done

       With this change extra characters will be discarded only if device
       has not been marked as "enabled" yet.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru> 

into silver.ucw.cz:/home/vojtech/bk/input

Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch by Jesper Juhl is still required in 2.6.11-rc2-mm1.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

ESP needs to check for error returns from calls
to crypto_cipher_setkey().
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

It should be unsigned long.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Some misc. fixes for 5750. The first 2 fixes below are for correctness.

- Do not set extended MAC addresses for 5750
- Do not set NIC ring addresses in send ring and receive return ring
  RCBs for 5750
- Check eeprom write protect bit for 5750
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

looking at ext3_xattr_block_set() [fs/ext3/xattr.c] ...
I see that

                                error = -EDQUOT;
                                if (DQUOT_ALLOC_BLOCK(inode, 1))
                                        goto cleanup;

allocates a quota block, but right after that several
error echecks happen ...

                                if (error)
                                        goto cleanup;

and I don't see any DQUOT_FREE_BLOCK() in the errorpath

cleanup:
        if (ce)
                mb_cache_entry_release(ce);
        brelse(new_bh); 
        if (!(bs->bh && s->base == bs->bh->b_data))
                kfree(s->base);

        return error;

I'd suggest the attached fix.
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Nicolas Pitre

This enables audio on Mainstone with the ALSA PXA2xx AC97 driver.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King