- 14 Aug, 2019 14 commits
-
-
Sam Ravnborg authored
Drop use of the deprecated drmP.h header file. For all touched files divide include files into blocks, and sort them within the blocks. Fix fallout. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20190804094132.29463-3-sam@ravnborg.org
-
Sam Ravnborg authored
Drop use of the deprecated drmP.h header file. Fix fallout. Signed-off-by:
-
Geert Uytterhoeven authored
If the VGA connector has no DDC channel, an error pointer will be dereferenced, e.g. on Salvator-XS: Unable to handle kernel NULL pointer dereference at virtual address 000000000000017d ... Call trace: sysfs_do_create_link_sd.isra.0+0x40/0x108 sysfs_create_link+0x20/0x40 drm_sysfs_connector_add+0xa8/0xc8 drm_connector_register.part.3+0x54/0xb0 drm_connector_register_all+0xb0/0xd0 drm_modeset_register_all+0x54/0x88 drm_dev_register+0x18c/0x1d8 rcar_du_probe+0xe4/0x150 ... This happens because vga->ddc either contains a valid DDC channel pointer, or -ENODEV, and drm_connector_init_with_ddc() expects a valid DDC channel pointer, or NULL. Fix this by resetting vga->ddc to NULL in case of -ENODEV, and replacing the existing error checks by non-NULL checks. This is similar to what the HDMI connector driver does. Fixes: a4f9087e ("drm/bridge: dumb-vga-dac: Provide ddc symlink in connector sysfs directory") Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Jerome Brunet authored
Provide the eld to the generic hdmi-codec driver. This will let the driver enforce the maximum channel number and set the channel allocation depending on the hdmi sink. Cc: Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Jonas Karlman <jonas@kwiboo.se> Reviewed-by:
-
Jerome Brunet authored
Enable the i2s lanes depending on the number of channel in the stream Reviewed-by:
-
Jerome Brunet authored
When changing the audio hw params, reset the audio fifo to make sure any old remaining data is flushed. The databook mentions that such reset should be followed by a reset of the i2s block to make sure the samples stay aligned Reviewed-by:
-
Jerome Brunet authored
setup the channel allocation provided by the generic hdmi-codec driver Reviewed-by:
-
Jerome Brunet authored
Properly setup the channel count and layout in dw-hdmi i2s driver so we are not limited to 2 channels. Also correct the maximum channel reported by the DAI from 6 to 8 ch Reviewed-by:
-
Jerome Brunet authored
Set the number of channel in the infoframes Reviewed-by:
-
Jerome Brunet authored
Part of the channel count setup done in dw-hdmi ahb should actually be done whatever the interface providing the data. Let's move it to dw-hdmi driver instead. Reviewed-by:
-
Jerome Brunet authored
The dw-hdmi-i2s supports more formats than just regular i2s. Add support for left justified, right justified and dsp modes A and B. Reviewed-by:
-
Neil Armstrong authored
The amlogic,meson-dw-hdmi.txt and amlogic,meson-vpu.txt has been converted to YAML schemas, update MAINTAINERS to match them again. Signed-off-by:
Maxime Jourdan <mjourdan@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808085522.21950-4-narmstrong@baylibre.com
-
Neil Armstrong authored
Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic Display Controller over to YAML schemas. The original example has a leftover "dmc" memory cell, that has been removed in the yaml rewrite. The port connection table has been dropped in favor of a description of each port. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190808085522.21950-3-narmstrong@baylibre.com
-
Neil Armstrong authored
Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic Synopsys DW-HDMI specifics over to YAML schemas. The original example and usage of clock-names uses a reversed "isfr" and "iahb" clock-names, the rewritten YAML bindings uses the reversed instead of fixing the device trees order. The #sound-dai-cells optional property has been added to match this node as a sound dai. The port connection table has been dropped in favor of a description of each port. Reviewed-by:
-
- 13 Aug, 2019 3 commits
-
-
Christian König authored
Be more consistent with the naming of the other DMA-buf objects. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/323401/
-
Christian König authored
The only remaining use for this is to protect against setting a new exclusive fence while we grab both exclusive and shared. That can also be archived by looking if the exclusive fence has changed or not after completing the operation. v2: switch setting excl fence to rcu_assign_pointer Signed-off-by:
-
Chris Wilson authored
During release of the syncpt, we remove it from the list of syncpt and the tree, but only if it is not already been removed. However, during signaling, we first remove the syncpt from the list. So, if we concurrently free and signal the syncpt, the free may decide that it is not part of the tree and immediately free itself -- meanwhile the signaler goes on to use the now freed datastructure. In particular, we get struck by commit 0e2f733a ("dma-buf: make dma_fence structure a bit smaller v2") as the cb_list is immediately clobbered by the kfree_rcu. v2: Avoid calling into timeline_fence_release() from under the spinlock Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111381 Fixes: d3862e44 ("dma-buf/sw-sync: Fix locking around sync_timeline lists") References: 0e2f733a ("dma-buf: make dma_fence structure a bit smaller v2") Signed-off-by:
-
- 12 Aug, 2019 20 commits
-
-
Rob Herring authored
Increment the driver version to expose the new BO allocation flags. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Steven Price <steven.price@arm.com> Acked-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by:
-
Rob Herring authored
The midgard/bifrost GPUs need to allocate GPU heap memory which is allocated on GPU page faults and not pinned in memory. The vendor driver calls this functionality GROW_ON_GPF. This implementation assumes that BOs allocated with the PANFROST_BO_NOEXEC flag are never mmapped or exported. Both of those may actually work, but I'm unsure if there's some interaction there. It would cause the whole object to be pinned in memory which would defeat the point of this. On faults, we map in 2MB at a time in order to utilize huge pages (if enabled). Currently, once we've mapped pages in, they are only unmapped if the BO is freed. Once we add shrinker support, we can unmap pages with the shrinker. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Acked-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Rob Herring authored
In preparation to handle mapping of page faults, we need the MMU handler to be threaded as code paths take a mutex. As the IRQ may be shared, we can't use the default handler and must disable the MMU interrupts locally. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by:
-
Rob Herring authored
Runtime PM resume and job timeouts both call the same sequence of functions, so consolidate them to a common function. This will make changing the reset related code easier. The MMU also needs some re-initialization on reset, so rework its call. In the process, we hide the address space details within the MMU code in preparation to support multiple address spaces. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by:
-
Rob Herring authored
Executable buffers have an alignment restriction that they can't cross 16MB boundary as the GPU program counter is 24-bits. This restriction is currently not handled and we just get lucky. As current userspace assumes all BOs are executable, that has to remain the default. So add a new PANFROST_BO_NOEXEC flag to allow userspace to indicate which BOs are not executable. There is also a restriction that executable buffers cannot start or end on a 4GB boundary. This is mostly avoided as there is only 4GB of space currently and the beginning is already blocked out for NULL ptr detection. Add support to handle this restriction fully regardless of the current constraints. For existing userspace, all created BOs remain executable, but the GPU VA alignment will be increased to the size of the BO. This shouldn't matter as there is plenty of GPU VA space. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by:
-
Rob Herring authored
In preparation to create partial GPU mappings of BOs on page faults, split out the SG list handling of panfrost_mmu_map(). Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed: Steven Price <steven.price@arm.com> Acked-by:
-
Rob Herring authored
Setting the GPU VA when creating the GEM object doesn't allow for any conditional adjustments to the mapping. In preparation to support adjusting the mapping and per FD address spaces, restructure the GEM object creation to map and unmap the GEM object in the GEM object .open() and .close() hooks. While panfrost_gem_free_object() and panfrost_gem_prime_import_sg_table() are not really needed after this commit, keep them as we'll need them in subsequent commits. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by:
-
Rob Herring authored
If a driver does its own management of pages, the shmem helper object's pages array could be allocated when a SG table is not. There's not really any good reason to tie putting pages with having a SG table when freeing the object, so just put pages if the pages array is populated. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Rob Herring authored
Panfrost has a need for pages allocated on demand via GPU page faults. When releasing the pages, the only thing preventing using drm_gem_put_pages() is needing to skip over unpopulated pages, so allow for skipping over NULL struct page pointers. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Hans de Goede authored
Add -ENODEV to the list of usb-transfer errors which we ignore to avoid logging Frame update errors when the device gets unplugged. Acked-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190811143725.5951-2-hdegoede@redhat.com
-
Hans de Goede authored
I made the condition of the wait_event_timeout call in gm12u320_fb_update_work a helper which takes a mutex to make sure that any writes to fb_update.run or fb_update.fb from other CPU cores are seen before the check is done. This is not necessary as the wait_event helpers contain the necessary barriers for this themselves. More over it is harmfull since by the time the check is done the task is no longer in the TASK_RUNNING state and calling mutex_lock while not in task-running is not allowed, leading to this warning when the kernel is build with some extra locking checks enabled: [11947.450011] do not call blocking ops when !TASK_RUNNING; state=2 set at [<00000000e4306de6>] prepare_to_wait_event+0x61/0x190 This commit fixes this by dropping the helper and simply directly checking the condition (without unnecessary locking) in the wait_event_timeout call. Acked-by: -
Hans de Goede authored
Previously the driver was using a mix of DRM_ERROR and dev_err, be consisent and use DRM_DEV_ERROR everywhere instead. Cc: Sam Ravnborg <sam@ravnborg.org> Suggested-by:
-
Hans de Goede authored
3 small cleanups: 1) Drop unused DRIVER_PATCHLEVEL 2) We do not set mode_config.preferred_depth, so instead of passing the unset mode_config.preferred_depth to drm_fbdev_generic_setup simply pass 0 3) Use __maybe_unused instead of #ifdef CONFIG_PM around the suspend / resume functions Cc: Sam Ravnborg <sam@ravnborg.org> Suggested-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
-
Jason Ekstrand authored
This patch only brings the syncobj documentation up-to-date for the original form of syncobj. It does not contain any information about the design of timeline syncobjs. v2: Incorporate feedback from Lionel and Christian: - Mention actual ioctl and flag names - Better language around reference counting - Misc. language cleanups Signed-off-by:
Jason Ekstrand <jason@jlekstrand.net> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by:
-
Sean Paul authored
Fixes the following warnings: ../drivers/gpu/drm/drm_connector.c:989: WARNING: Unexpected indentation. ../drivers/gpu/drm/drm_connector.c:993: WARNING: Unexpected indentation. ../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string. ../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string. Changes in v2: - Use () instead of & for functions (Sam) Fixes: 1b27fbdd ("drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers") Fixes: bb5a45d4 ("drm/hdcp: update content protection property with uevent") Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190812140112.6702-1-sean@poorly.run
-
Gustavo A. R. Silva authored
Add suffix ULL to constant 1000 in order to avoid a potential integer overflow and give the compiler complete information about the proper arithmetic to use. Notice that this constant is being used in a context that expects an expression of type u64, but it's currently evaluated using 32-bit arithmetic. Addresses-Coverity-ID: 1485796 ("Unintentional integer overflow") Fixes: ed22c6d9 ("drm/komeda: Use drm_display_mode "crtc_" prefixed hardware timings") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
-
Chris Wilson authored
Same as for the individual fences, we want to report the actual status of the fence when queried. Reported-by:
Petri Latvala <petri.latvala@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190812091203.29871-1-chris@chris-wilson.co.uk
-
Ondrej Jirman authored
Orange Pi 3 board requires enabling a voltage shifting circuit via GPIO for the DDC bus to be usable. Add support for hdmi-connector node's optional ddc-en-gpios property to support this use case. Signed-off-by:
Ondrej Jirman <megous@megous.com> Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190806155744.10263-4-megous@megous.com
-
Ondrej Jirman authored
Some Allwinner SoC using boards (Orange Pi 3 for example) need to enable on-board voltage shifting logic for the DDC bus using a gpio to be able to access DDC bus. Use ddc-en-gpios property on the hdmi-connector to model this. Add binding documentation for optional ddc-en-gpios property. Signed-off-by:
-
Chris Wilson authored
When one of the array of fences is signaled, propagate its errors to the parent fence-array (keeping the first error to be raised). v2: Opencode cmpxchg_local to avoid compiler freakout. v3: Be careful not to flag an error if we race against signal-on-any. v4: Same applies to installing the signal cb. v5: Use cmpxchg to only set the error once before using a nifty idea by Christian to avoid changing the status after emitting the signal. Signed-off-by:
-
- 10 Aug, 2019 3 commits
-
-
Sam Ravnborg authored
There are no errors that can be reported by this function, so drop the return code. Fix the only bridge driver that checked the return result. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190804201637.1240-14-sam@ravnborg.org
-
Sam Ravnborg authored
Inline comments provide better space for additional comments. Comments was slightly edited to follow the normal style, but no change to actual content. Used the opportuniy to change the order in drm_panel_funcs to follow the order they will be used by a panel. Signed-off-by:
-
Sam Ravnborg authored
Move inline functions from include/drm/drm_panel.h to drm_panel.c. This is in preparation for follow-up patches that will add extra logic to the functions. As they are no longer static inline, EXPORT them. v2: - align order of functions in drm_panel.h and drm_panel.c (Laurent) Signed-off-by:
-
