In the previous code, the variable apic_sw_disabled influences
recalculate_apic_map. But in "KVM: x86: simplify kvm_apic_map"
(commit: 3b5a5ffa),
the access to apic_sw_disabled in recalculate_apic_map has been
deleted.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

structure svm_init_data is never used. So remove it.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Like IA32_STAR, IA32_LSTAR and IA32_FMASK only need to contain guest
values on VM-entry when the guest is in long mode and EFER.SCE is set.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

SYSCALL raises #UD in compatibility mode on Intel CPUs, so it's
pointless to load the guest's IA32_CSTAR value into the hardware MSR.

IA32_CSTAR still provides 48 bits of storage on Intel CPUs that have
CPUID.80000001:EDX.LM[bit 29] set, so we cannot remove it from the
vmx_msr_index[] array.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a comment explaining why MSR_STAR must be included in
vmx_msr_index[] even for i386 builds.

The elided comment has not been relevant since move_msr_up() was
introduced in commit a75beee6 ("KVM: VMX: Avoid saving and
restoring msrs on lightweight vmexit").
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

RDTSCP is supported in legacy mode as well as long mode. The
IA32_TSC_AUX MSR should be set to the correct guest value before
entering any guest that supports RDTSCP.

Fixes: 4e47c7a6 ("KVM: VMX: Add instruction rdtscp support for guest")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

From a functional perspective, this is (supposed to be) a straight
copy-paste of code.  Code was moved piecemeal to nested.c as not all
code that could/should be moved was obviously nested-only.  The nested
code was then re-ordered as needed to compile, i.e. stats may not show
this is being a "pure" move despite there not being any intended changes
in functionality.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Exposing only the function allows @nested, i.e. the module param, to be
statically defined in vmx.c, ensuring we aren't unnecessarily checking
said variable in the nested code.  nested_vmx_allowed() is exposed due
to the need to verify nested support in vmx_{get,set}_nested_state().
The downside is that nested_vmx_allowed() likely won't be inlined in
vmx_{get,set}_nested_state(), but that should be a non-issue as they're
not a hot path.  Keeping vmx_{get,set}_nested_state() in vmx.c isn't a
viable option as they need access to several nested-only functions.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...as they're used directly by the nested code.  This will allow
moving the bulk of the nested code out of vmx.c without concurrent
changes to vmx.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Exposed vmx_msr_index, vmx_return and host_efer via vmx.h so that the
nested code can be moved out of vmx.c.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...so that the function doesn't need to be created when moving the
nested code out of vmx.c.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...so that it doesn't need access to @nested. The only case where the
provided struct isn't already zeroed is the call from vmx_create_vcpu()
as setup_vmcs_config() zeroes the struct in the other use cases.  This
will allow @nested to be statically defined in vmx.c, i.e. this removes
the last direct reference from nested code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...in nested-specific code so that they can eventually be moved out of
vmx.c, e.g. into nested.c.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...so that future patches can reference e.g. @kvm_vmx_exit_handlers
without having to simultaneously move a big chunk of code.  Speaking
from experience, resolving merge conflicts is an absolute nightmare
without pre-moving the code.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...so that it can conditionally set by the VMX code, i.e. iff @nested is
true.  This will in turn allow it to be moved out of vmx.c and into a
nested-specified file.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Eventually this will allow us to move the nested VMX code out of vmx.c.
Note that this also effectively wraps @enable_shadow_vmcs with @nested
so that it too can be moved out of vmx.c.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

VMX has a few hundred lines of code just to wrap various VMX specific
instructions, e.g. VMWREAD, INVVPID, etc...  Move them to a dedicated
header so it's easier to find/isolate the boilerplate.

With this change, more inlines can be moved from vmx.c to vmx.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The header, evmcs.h, already exists and contains a fair amount of code,
but there are a few pieces in vmx.c that can be moved verbatim.  In
addition, move an array definition to evmcs.c to prepare for multiple
consumers of evmcs.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

vmcs12 is the KVM-defined struct used to track a nested VMCS, e.g. a
VMCS created by L1 for L2.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This isn't intended to be a pure reflection of hardware, e.g. struct
loaded_vmcs and struct vmcs_host_state are KVM-defined constructs.
Similar to capabilities.h, this is a standalone file to avoid circular
dependencies between yet-to-be-created vmx.h and nested.h files.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Expose the variables associated with various module params that are
needed by the nested VMX code.  There is no ulterior logic for what
variables are/aren't exposed, this is purely "what's needed by the
nested code".

Note that @nested is intentionally not exposed.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Defining a separate capabilities.h as opposed to putting this code in
e.g. vmx.h avoids circular dependencies between (the yet-to-be-added)
vmx.h and nested.h.  The aforementioned circular dependencies are why
struct nested_vmx_msrs also resides in capabilities instead of e.g.
nested.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...instead of referencing the global struct.  This will allow moving
setup_vmcs_config() to a separate file that may not have access to
the global variable.  Modify nested_vmx_setup_ctls_msrs() appropriately
since vmx_capability.ept may not be accurate when called by
vmx_check_processor_compat().

No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

EFER and PERF_GLOBAL_CTRL MSRs have dedicated VM Entry/Exit controls
that KVM dynamically toggles based on whether or not the guest's value
for each MSRs differs from the host.  Handle the dynamic behavior by
adding a helper that clears the dynamic bits so the bits aren't set
when initializing the VMCS field outside of the dynamic toggling flow.
This makes the handling consistent with similar behavior for other
controls, e.g. pin, exec and sec_exec.  More importantly, it eliminates
two global bools that are stealthily modified by setup_vmcs_config.

Opportunistically clean up a comment and print related to errata for
IA32_PERF_GLOBAL_CTRL.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

MSR_IA32_XSS has no relation to the VMCS whatsoever, it doesn't belong
in setup_vmcs_config() and its reference to host_xss prevents moving
setup_vmcs_config() to a dedicated file.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

VMX specific files now reside in a dedicated subdirectory, i.e. the
file name prefix is redundant.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

VMX specific files now reside in a dedicated subdirectory.  Drop the
"vmx" prefix, which is redundant, and add a "vmcs" prefix to clarify
that the file is referring to VMCS shadow fields.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...to prepare for shattering vmx.c into multiple files without having
to prepend "vmx_" to all new files.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Until this point vmx.c has been the only consumer and included the
file after many others.  Prepare for multiple consumers, i.e. the
shattering of vmx.c
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Until this point vmx.c has been the only consumer and included the
file after many others.  Prepare for multiple consumers, i.e. the
shattering of vmx.c
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...to prepare for the creation of a "vmx" subdirectory that will contain
a variety of headers.  Clean things up now to avoid making a bigger mess
in the future.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

...and make enable_shadow_vmcs depend on nested.  Aside from the obvious
memory savings, this will allow moving the relevant code out of vmx.c in
the future, e.g. to a nested specific file.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Fixes: 34a1cd60 ("kvm: x86: vmx: move some vmx setting from vmx_init() to hardware_setup()")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

There are two problems with KVM_GET_DIRTY_LOG.  First, and less important,
it can take kvm->mmu_lock for an extended period of time.  Second, its user
can actually see many false positives in some cases.  The latter is due
to a benign race like this:

  1. KVM_GET_DIRTY_LOG returns a set of dirty pages and write protects
     them.
  2. The guest modifies the pages, causing them to be marked ditry.
  3. Userspace actually copies the pages.
  4. KVM_GET_DIRTY_LOG returns those pages as dirty again, even though
     they were not written to since (3).

This is especially a problem for large guests, where the time between
(1) and (3) can be substantial.  This patch introduces a new
capability which, when enabled, makes KVM_GET_DIRTY_LOG not
write-protect the pages it returns.  Instead, userspace has to
explicitly clear the dirty log bits just before using the content
of the page.  The new KVM_CLEAR_DIRTY_LOG ioctl can also operate on a
64-page granularity rather than requiring to sync a full memslot;
this way, the mmu_lock is taken for small amounts of time, and
only a small amount of time will pass between write protection
of pages and the sending of their content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When manual dirty log reprotect will be enabled, kvm_get_dirty_log_protect's
pointer argument will always be false on exit, because no TLB flush is needed
until the manual re-protection operation.  Rename it from "is_dirty" to "flush",
which more accurately tells the caller what they have to do with it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The first such capability to be handled in virt/kvm/ will be manual
dirty page reprotection.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge branch 'khdr_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest into HEAD

Merge topic branch from Shuah.

Commit b2d35fa5 ("selftests: add headers_install to lib.mk") added
khdr target to run headers_install target from the main Makefile. The
logic uses KSFT_KHDR_INSTALL and top_srcdir as controls to initialize
variables and include files to run headers_install from the top level
Makefile. There are a few problems with this logic.

1. Exposes top_srcdir to all tests
2. Common logic impacts all tests
3. Uses KSFT_KHDR_INSTALL, top_srcdir, and khdr in an adhoc way. Tests
   add "khdr" dependency in their Makefiles to TEST_PROGS_EXTENDED in
   some cases, and STATIC_LIBS in other cases. This makes this framework
   confusing to use.

The common logic that runs for all tests even when KSFT_KHDR_INSTALL
isn't defined by the test. top_srcdir is initialized to a default value
when test doesn't initialize it. It works for all tests without a sub-dir
structure and tests with sub-dir structure fail to build.

e.g: make -C sparc64/drivers/ or make -C drivers/dma-buf

../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make: *** No rule to make target '../../../../scripts/subarch.include'.  Stop.

There is no reason to require all tests to define top_srcdir and there is
no need to require tests to add khdr dependency using adhoc changes to
TEST_* and other variables.

Fix it with a consistent use of KSFT_KHDR_INSTALL and top_srcdir from tests
that have the dependency on headers_install.

Change common logic to include khdr target define and "all" target with
dependency on khdr when KSFT_KHDR_INSTALL is defined.

Only tests that have dependency on headers_install have to define just
the KSFT_KHDR_INSTALL, and top_srcdir variables and there is no need to
specify khdr dependency in the test Makefiles.

Fixes: b2d35fa5 ("selftests: add headers_install to lib.mk")
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <shuah@kernel.org>