- 31 Jul, 2018 27 commits
-
-
Bart Van Assche authored
This patch avoids that sparse complains about casts to restricted __be32. Fixes: a3cdaa69 ("cxgb4: Adds CPL support for Shared Receive Queues") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Acked-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Bart Van Assche authored
This patch avoids that the following warning is reported when building with W=1: drivers/infiniband/hw/cxgb4/cm.c:1860:5: warning: variable 'status' set but not used [-Wunused-but-set-variable] u8 status; ^~~~~~ Fixes: 6a0b6174 ("rdma/cxgb4: Add support for kernel mode SRQ's") Signed-off-by: -
Parav Pandit authored
In rdma cm module, functions which are common between IB and iWarp are named with cma_. iWarp specific functions are prefixed with cma_iw. IB specific functions are perfixed with cma_ib. However some functions in request processing path didn't follow cma_ib notion. Prefix them with _ib for better code clarity. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Parav Pandit authored
cma_add_one() initializes the default GID regardless of device type. listen_id is bound to a device and an IP address, its GID type is initialized by cma_acquire_dev(). Therefore a valid default GID type is always available, it is not needed to check port type during cma_acquire_dev(). Initialize gid type of a cm id when the cm_id is created instead of doing conditional checks during cma_acquire_dev() and trying to initialize to 0 during _cma_attach_to_dev(). Signed-off-by:
-
Parav Pandit authored
In various functions rdma_cm_event is zero initialized on stack using memset() while holding lock which is not necessary. Therefore, don't hold the lock while initializing on stack. Signed-off-by:
-
Parav Pandit authored
Return bool for following internal and inline functions as their underlying APIs return bool too. 1. cma_zero_addr() 2. cma_loopback_addr() 3. cma_any_addr() 4. ib_addr_any() 5. ib_addr_loopback() While we are touching cma_loopback_addr(), remove extra white spaces in it. Signed-off-by:
-
Parav Pandit authored
Arrange fields of cma_req_info structure for efficiency on stack and get rid of one bit boolean field. Signed-off-by:
-
Parav Pandit authored
Constify several pointers such as path_rec, ib_cm_event and listen_id pointers in several functions. Signed-off-by:
-
Parav Pandit authored
Following APIs are not supposed to modify addr or dest_addr contents. Therefore make those function argument const for better code readability. 1. rdma_resolve_ip() 2. rdma_addr_size() 3. rdma_resolve_addr() Signed-off-by:
-
Parav Pandit authored
Currently dst address is first set and later on cleared on either of the 3 error conditions are met. However none of the APIs or checks are supposed to refer to the destination address of the cm_id. Therefore, set the destination address after necessary checks pass which simplifies the error flow. Signed-off-by:
-
Parav Pandit authored
Currently rdma_cm_id's resource tracking fields such as owner task and kern_name and other non resource tracking fields are initialized in in single function __rdma_create_id(). Therefore, initialize rdma_cm_id's resource type also in same init function. Signed-off-by:
-
Lijun Ou authored
This was missed in a few places, and was just using 0. Also correct the spelling of HNS_ROCE_FLOW_LABEL_MASK Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Lijun Ou authored
This patch mainly uses CMD_CSQ_DESC_NUM instead of magic number in order to improve readability. Signed-off-by:
-
Lijun Ou authored
Set for ret was missing in the error path here, resulting in incorrect error code for modify_qp. Signed-off-by:
-
Lijun Ou authored
This patch mainly fills the correct value into the vlan id field of qp context as well as update the vlan field name according to the latest hardware user manual. Signed-off-by:
-
Lijun Ou authored
Only when the IB_QP_AV flag of attr_mask is set is it valid to assign the related fields of the av into the qp context. Signed-off-by:
-
Kamal Heib authored
The rdma core is taking care of return the right error code when the rdma device callbacks aren't supported. Signed-off-by:
Kamal Heib <kamalheib1@gmail.com> Acked-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Kamal Heib authored
Make sure the providers implement the verbs callbacks before calling them, otherwise return -EOPNOTSUPP. Signed-off-by:
-
Kamal Heib authored
{create,destroy}_ah aren't mandatory verbs, because not all providers are implementing them. Signed-off-by: -
Kamal Heib authored
Make sure to check for "-EOPNOTSUPP" instead of "-ENOSYS" which is the return code from ib_create_srq() in case that it not supported. Signed-off-by:
-
Kamal Heib authored
The proper return code is "-EOPNOTSUPP" when the create_srq() callback is not supported. Signed-off-by:
-
Jack Morgenstein authored
In the current implementation, the driver tries to allocate contiguous memory, and if it fails, it falls back to 4K fragmented allocation. Once the memory is fragmented, the first allocation might take a lot of time, and even fail, which can cause connection failures. This patch changes the logic to always allocate with 4K granularity, since it's more robust and more likely to succeed. This patch was tested with Lustre and no performance degradation was observed. Note: This commit eliminates the "shrinking WQE" feature. This feature depended on using vmap to create a virtually contiguous send WQ. vmap use was abandoned due to problems with several processors (see the commit cited below). As a result, shrinking WQE was available only with physically contiguous send WQs. Allocating such send WQs caused the problems described above. Therefore, as a side effect of eliminating the use of large physically contiguous send WQs, the shrinking WQE feature became unavailable. Warning example: worker/20:1: page allocation failure: order:8, mode:0x80d0 CPU: 20 PID: 513 Comm: kworker/20:1 Tainted: G OE ------------ Workqueue: ib_cm cm_work_handler [ib_cm] Call Trace: [<ffffffff81686d81>] dump_stack+0x19/0x1b [<ffffffff81186160>] warn_alloc_failed+0x110/0x180 [<ffffffff8118a954>] __alloc_pages_nodemask+0x9b4/0xba0 [<ffffffff811ce868>] alloc_pages_current+0x98/0x110 [<ffffffff81184fae>] __get_free_pages+0xe/0x50 [<ffffffff8133f6fe>] swiotlb_alloc_coherent+0x5e/0x150 [<ffffffff81062551>] x86_swiotlb_alloc_coherent+0x41/0x50 [<ffffffffa056b4c4>] mlx4_buf_direct_alloc.isra.7+0xc4/0x180 [mlx4_core] [<ffffffffa056b73b>] mlx4_buf_alloc+0x1bb/0x260 [mlx4_core] [<ffffffffa0b15496>] create_qp_common+0x536/0x1000 [mlx4_ib] [<ffffffff811c6ef7>] ? dma_pool_free+0xa7/0xd0 [<ffffffffa0b163c1>] mlx4_ib_create_qp+0x3b1/0xdc0 [mlx4_ib] [<ffffffffa0b01bc2>] ? mlx4_ib_create_cq+0x2d2/0x430 [mlx4_ib] [<ffffffffa0b21f20>] mlx4_ib_create_qp_wrp+0x10/0x20 [mlx4_ib] [<ffffffffa08f152a>] ib_create_qp+0x7a/0x2f0 [ib_core] [<ffffffffa06205d4>] rdma_create_qp+0x34/0xb0 [rdma_cm] [<ffffffffa08275c9>] kiblnd_create_conn+0xbf9/0x1950 [ko2iblnd] [<ffffffffa074077a>] ? cfs_percpt_unlock+0x1a/0xb0 [libcfs] [<ffffffffa0835519>] kiblnd_passive_connect+0xa99/0x18c0 [ko2iblnd] Fixes: 73898db0 ("net/mlx4: Avoid wrong virtual mappings") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Jason Gunthorpe authored
This clearly indicates that the input is a bitwise combination of values in an enum, and identifies which enum contains the definition of the bits. Special accessors are provided that handle the mandatory validation of the allowed bits and enforce the correct type for bitwise flags. If we had introduced this at the start then the kabi would have uniformly used u64 data to pass flags, however today there is a mixture of u64 and u32 flags. All places are converted to accept both sizes and the accessor fixes it. This allows all existing flags to grow to u64 in future without any hassle. Finally all flags are, by definition, optional. If flags are not passed the accessor does not fail, but provides a value of zero. Signed-off-by:
-
Bart Van Assche authored
Since neither ib_post_send() nor ib_post_recv() modify the data structure their second argument points at, declare that argument const. This change makes it necessary to declare the 'bad_wr' argument const too and also to modify all ULPs that call ib_post_send(), ib_post_recv() or ib_post_srq_recv(). This patch does not change any functionality but makes it possible for the compiler to verify whether the ib_post_(send|recv|srq_recv) really do not modify the posted work request. To make this possible, only one cast had to be introduce that casts away constness, namely in rpcrdma_post_recvs(). The only way I can think of to avoid that cast is to introduce an additional loop in that function or to change the data type of bad_wr from struct ib_recv_wr ** into int (an index that refers to an element in the work request list). However, both approaches would require even more extensive changes than this patch. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Since the next patch will constify the wr pointer, do not modify the data that pointer points at. Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Cc: Saeed Mahameed <saeedm@mellanox.com> Acked-by:
-
Bart Van Assche authored
When posting a send work request, the work request that is posted is not modified by any of the RDMA drivers. Make this explicit by constifying most ib_send_wr pointers in RDMA transport drivers. Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Bart Van Assche authored
Since the next patch will change the return type of these functions into a const pointer and since the iSER driver modifies the work request these functions return a pointer two, inline two work request conversion function calls. This patch does not change any functionality. Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
- 27 Jul, 2018 3 commits
-
-
Jason Gunthorpe authored
Code changes in smc have become so complicated this cycle that the RDMA patches to remove ib_query_gid in smc create too complex merge conflicts. Allow those conflicts to be resolved by using the net/smc hunks by providing a compatibility wrapper. During the second phase of the merge window this wrapper will be deleted and smc updated to use the new API. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
-
Lijun Ou authored
The driver implements the modify_cq callback, but did not set the bit to expose it to userspace. Signed-off-by:
-
Lijun Ou authored
Because the data structure of hip08 is little endian, it needs to fix the immediate field of wqe and cqe into __le32. Signed-off-by:
-
- 26 Jul, 2018 10 commits
-
-
Lijun Ou authored
In order to avoid using usleep function in lock function, we use delay function instead of it. Besides, it also use brackets for standardized the computed order. Signed-off-by:
-
Lijun Ou authored
When hop_num is more than three, it need to return -EINVAL. This patch fixes it. Signed-off-by:
-
Lijun Ou authored
When create loop qp fail, it will return the correct result when modify_qp() fails. Signed-off-by:
-
Lijun Ou authored
This patch adds PCI matching for the hns 50GE NIC. Signed-off-by:
-
Lijun Ou authored
When init cmq fail in initial flow of RoCE, it should return the errno of cmq_init function, not of the rest call. Signed-off-by:
-
Qing Huang authored
When a CX5 device is configured in dual-port RoCE mode, after creating many VFs against port 1, creating the same number of VFs against port 2 will flood kernel/syslog with something like "mlx5_*:mlx5_ib_bind_slave_port:4266:(pid 5269): port 2 already affiliated." So basically, when traversing mlx5_ib_dev_list, mlx5_ib_add_slave_port() repeatedly attempts to bind the new mpi structure to every device on the list until it finds an unbound device. Change the log level from warn to dbg to avoid log flooding as the warning should be harmless. Signed-off-by:
Qing Huang <qing.huang@oracle.com> Reviewed-by:
-
Bart Van Assche authored
This patch avoids that the following compiler warning is reported when building with gcc 8 and W=1: drivers/infiniband/hw/usnic/usnic_fwd.c:95:2: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation] strncpy(ufdev->name, netdev_name(ufdev->netdev), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(ufdev->name) - 1); ~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: -
Jason Gunthorpe authored
The call in svc_rdma_post_chunk_ctxt() does actually use bad_wr. Fixes: ed288d74 ("net/xprtrdma: Simplify ib_post_(send|recv|srq_recv)() calls") Reported-by:
-
Parav Pandit authored
Currently if the cm_id is not bound to any netdevice, than for such cm_id, net namespace is ignored; which is incorrect. Regardless of cm_id bound to a netdevice or not, net namespace must match. When a cm_id is bound to a netdevice, in such case net namespace and netdevice both must match. Fixes: 4c21b5bc ("IB/cma: Add net_dev and private data checks to RDMA CM") Signed-off-by:
-
Parav Pandit authored
When netdevice is not found for a request, and if it for RoCE port, currently it allows matching the listener as long as port number matches by ignoring the netdevice. Now that we always prefer to have netdevice associated with RoCE, when netdevice is not found, don't consider RoCE ports. In other words, a NULL netdevice with RoCE is not acceptable. Therefore, remove this confusing RoCE port ignorance check. Signed-off-by:
-
