- 30 Nov, 2017 1 commit
-
-
Trond Myklebust authored
Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
- 29 Nov, 2017 2 commits
-
-
Trond Myklebust authored
Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Trond Myklebust authored
gcc 4.4.4 is too old to have full C11 anonymous union support, so the current initialiser fails to compile. Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
- 17 Nov, 2017 37 commits
-
-
Benjamin Coddington authored
Commit e1293727 "NFS: Move the flock open mode check into nfs_flock()" changed NFSv3 behavior for flock() such that the open mode must match the lock type, however that requirement shouldn't be enforced for flock(). Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Cc: stable@vger.kernel.org # v4.12 Signed-off-by:
-
Joshua Watt authored
The option was incorrectly masking off all other options. Signed-off-by:
Joshua Watt <JPEWhacker@gmail.com> Cc: stable@vger.kernel.org #3.7 Signed-off-by:
-
Chuck Lever authored
Before traversing a referral and performing a mount, the mounted-on directory looks strange: dr-xr-xr-x. 2 4294967294 4294967294 0 Dec 31 1969 dir.0 nfs4_get_referral is wiping out any cached attributes with what was returned via GETATTR(fs_locations), but the bit mask for that operation does not request any file attributes. Retrieve owner and timestamp information so that the memcpy in nfs4_get_referral fills in more attributes. Changes since v1: - Don't request attributes that the client unconditionally replaces - Request only MOUNTED_ON_FILEID or FILEID attribute, not both - encode_fs_locations() doesn't use the third bitmask word Fixes: 6b97fd3d ("NFSv4: Follow a referral") Suggested-by:
Pradeep Thomas <pradeepthomas@gmail.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 703509 Addresses-Coverity-ID: 703510 Addresses-Coverity-ID: 703511 Addresses-Coverity-ID: 703512 Addresses-Coverity-ID: 703513 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Vasily Averin authored
Publishing of net pointer is not safe, use net->ns.inum as net ID [ 171.391947] RPC: created new rpcb local clients (rpcb_local_clnt: ..., rpcb_local_clnt4: ...) for net f00001e7 [ 171.767188] NFSD: starting 90-second grace period (net f00001e7) Signed-off-by:Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Vasily Averin authored
Publishing of net pointer is not safe, use net->ns.inum instead Signed-off-by:
-
Vasily Averin authored
Be sure that all_clients list initialized in net_init hook was return to initial state. Signed-off-by:
-
Vasily Averin authored
Be sure that nfs_client_list and nfs_volume_list lists initialized in net_init hook were return to initial state in net_exit hook. Signed-off-by:
-
Markus Elfring authored
Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Trond Myklebust authored
When decoding a CLOSE, replace the stateid returned by the server with the "invalid special stateid" described in RFC5661, Section 8.2.3. In nfs_set_open_stateid_locked, ignore stateids from closed state. Signed-off-by:
-
Trond Myklebust authored
In nfs_set_open_stateid_locked, we must ignore stateids from closed state. Reported-by:
Andrew W Elble <aweits@rit.edu> Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
If our layoutreturn returns an NFS4ERR_OLD_STATEID, then try to update the stateid and retry. Signed-off-by:
-
Trond Myklebust authored
If our layoutreturn on close operation returns an NFS4ERR_OLD_STATEID, then try to update the stateid and retry. We know that there should be no further LAYOUTGET requests being launched. Signed-off-by:
-
Trond Myklebust authored
If the stateid is no longer recognised on the server, either due to a restart, or due to a competing CLOSE call, then we do not have to retry. Any open contexts that triggered a reopen of the file, will also act as triggers for any CLOSE for the updated stateids. Signed-off-by:
-
Trond Myklebust authored
If we're racing with an OPEN, then retry the operation instead of declaring it a success. Signed-off-by:
-
Trond Myklebust authored
On successful rename, the "old_dentry" is retained and is attached to the "new_dir", so we need to call nfs_set_verifier() accordingly. Signed-off-by:
-
Trond Myklebust authored
If the server that does not implement NFSv4.1 persistent session semantics reboots while we are performing an exclusive create, then the return value of NFS4ERR_DELAY when we replay the open during the grace period causes us to lose the verifier. When the grace period expires, and we present a new verifier, the server will then correctly reply NFS4ERR_EXIST. This commit ensures that we always present the same verifier when replaying the OPEN. Reported-by:
Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
Ben Coddington has noted the following race between OPEN and CLOSE on a single client. Process 1 Process 2 Server ========= ========= ====== 1) OPEN file 2) OPEN file 3) Process OPEN (1) seqid=1 4) Process OPEN (2) seqid=2 5) Reply OPEN (2) 6) Receive reply (2) 7) new stateid, seqid=2 8) CLOSE file, using stateid w/ seqid=2 9) Reply OPEN (1) 10( Process CLOSE (8) 11) Reply CLOSE (8) 12) Forget stateid file closed 13) Receive reply (7) 14) Forget stateid file closed. 15) Receive reply (1). 16) New stateid seqid=1 is really the same stateid that was closed. IOW: the reply to the first OPEN is delayed. Since "Process 2" does not wait before closing the file, and it does not cache the closed stateid, then when the delayed reply is finally received, it is treated as setting up a new stateid by the client. The fix is to ensure that the client processes the OPEN and CLOSE calls in the same order in which the server processed them. This commit ensures that we examine the seqid of the stateid returned by OPEN. If it is a new stateid, we assume the seqid must be equal to the value 1, and that each state transition increments the seqid value by 1 (See RFC7530, Section 9.1.4.2, and RFC5661, Section 8.2.2). If the tracker sees that an OPEN returns with a seqid that is greater than the cached seqid + 1, then it bumps a flag to ensure that the caller waits for the RPCs carrying the missing seqids to complete. Note that there can still be pathologies where the server crashes before it can even send us the missing seqids. Since the OPEN call is still holding a slot when it waits here, that could cause the recovery to stall forever. To avoid that, we time out after a 5 second wait. Reported-by: -
Chuck Lever authored
Display information about the RPC procedure being requested in the trace log. This sometimes critical information cannot always be derived from other RPC trace entries. Signed-off-by:
-
Chuck Lever authored
The rpc_task_begin trace point always display a task ID of zero. Move the trace point call site so that it picks up the new task ID. Signed-off-by:
-
Chuck Lever authored
mount.nf-11159 8.... 905.248380: xprt_transmit: [FAILED TO PARSE] xid=351291440 status=0 addr=192.168.2.5 port=20049 mount.nf-11159 8.... 905.248381: rpc_task_sleep: task:6210@1 flags=0e80 state=0005 status=0 timeout=60000 queue=xprt_pending kworker/-1591 1.... 905.248419: xprt_lookup_rqst: [FAILED TO PARSE] xid=351291440 status=0 addr=192.168.2.5 port=20049 kworker/-1591 1.... 905.248423: xprt_complete_rqst: [FAILED TO PARSE] xid=351291440 status=24 addr=192.168.2.5 port=20049 Byte swapping is not available during trace-cmd report. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Thomas Meyer authored
Bool initializations should use true and false. Bool tests don't need comparisons. Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Anna Schumaker authored
There isn't an obvious way to acquire and release the RCU lock during a tracepoint, so we can't use the rpc_peeraddr2str() function here. Instead, rely on the client's cl_hostname, which should have similar enough information without needing an rcu_dereference(). Reported-by:
Dave Jones <davej@codemonkey.org.uk> Cc: stable@vger.kernel.org # v3.12 Signed-off-by:
-
Chuck Lever authored
Credit work contributed by Oracle engineers since 2014. Signed-off-by:
-
Chuck Lever authored
Clean up. This include should have been removed by commit 23826c7a ("xprtrdma: Serialize credit accounting again"). Signed-off-by:
Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by:
-
Chuck Lever authored
Clean up: C-structure style XDR encoding and decoding logic has been replaced over the past several merge windows on both the client and server. These data structures are no longer used. Signed-off-by:
-
Chuck Lever authored
Lift the Send and LocalInv completion handlers out of soft IRQ mode to make room for other work. Also, move the Send CQ to a different CPU than the CPU where the Receive CQ is running, for improved scalability. Signed-off-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs_client.cl_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
David Windsor <dwindsor@gmail.com> Reviewed-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs_lock_context.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs4_lock_state.ls_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs_cache_defer_req.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs4_ff_layout_mirror.ref is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
