- 25 Jul, 2016 14 commits
-
-
Ganesh Goudar authored
Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mark Bloch authored
When using an IPoIB bond currently only active-backup mode is a valid use case and this commit strengthens it. Since commit 2ab82852 ("net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address()") was introduced till 4.7-rc1, IPoIB didn't support the set_mac_address ndo, and hence the fail over mac policy always applied to IPoIB bonds. With the introduction of commit 492a7e67 ("IB/IPoIB: Allow setting the device address"), that doesn't hold and practically IPoIB bonds are broken as of that. To fix it, lets go to fail over mac if the device doesn't support the ndo OR this is IPoIB device. As a by-product, this commit also prevents a stack corruption which occurred when trying to copy 20 bytes (IPoIB) device address to a sockaddr struct that has only 16 bytes of storage. Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: implement port mirroring offload This patchset introduces tc matchall classifier and its offload to Spectrum hardware. In combination with mirred action, defined port mirroring setup is offloaded by mlxsw/spectrum driver. The commands used for creating mirror ports: tc qdisc add dev eth25 handle ffff: ingress tc filter add dev eth25 parent ffff: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 tc qdisc add dev eth25 handle 1: root prio tc filter add dev eth25 parent 1: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 These patches contain: - Resource query implementation - Hardware port mirorring support for spectrum. - Definition of the matchall traffic classifier. - General support for hw-offloading for that classifier. - Specific spectrum implementaion for matchall offloading. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
This patch offloads port mirroring directives to hw using the matchall TC with action mirror. It includes both the implementation of the ndo_setup_tc function for the spectrum driver and the spectrum hardware offload configuration code. The hardware offload code is basically two new functions which are capable of adding and removing a new mirror ports pair. It is done using the MPAT, MPAR and SBIB registers: - A new Switch-Port Analyzer (SPAN) entry is added using MPAT to the 'to' port. - The 'to' port is bound to the SPAN entry using MPAR register. - In case of egress SPAN, the 'to' port gets a new internal shared buffer using SBIB register. In addition, a new database was added to the mlxsw_sp struct to store all the SPAN entries and their bound ports list. The number of supported SPAN entries is determined by resource query. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
The helper function is_tcf_mirred_mirror helps finding whether an action struct is of type mirred and is configured to be of type mirror. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
The MPAR register is used to bind ports to a SPAN entry (which was created using MPAT register) and thus mirror their traffic (ingress / egress) to a different port. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
The MPAT register is used to query and configure the Switch Port Analyzer (SPAN) table. This register is used to configure a port as a mirror output port, while after that a mirrored input port can be bound using MPAR register. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
The SBIB register configures per port buffer for internal use. This register is used to configure an egress mirror buffer on the egress port which does the mirroring. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yotam Gigi authored
Following the work that have been done on offloading classifiers like u32 and flower, now the match-all classifier hw offloading is possible. if the interface supports tc offloading. To control the offloading, two tc flags have been introduced: skip_sw and skip_hw. Typical usage: tc filter add dev eth25 parent ffff: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The matchall classifier matches every packet and allows the user to apply actions on it. This filter is very useful in usecases where every packet should be matched, for example, packet mirroring (SPAN) can be setup very easily using that filter. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Add max span resources to resources query. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Add resources query implementation. If exists, query the HW for its builtin resources instead of having them as consts in the code. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kristian Evensen authored
The firmware in several ZTE devices (at least the MF823/831/910 modems/mifis) use OS fingerprinting to determine which type of device to export. In addition, these devices export a REST API which can be used to control the type of device. So far, on Linux, the devices have been seen as RNDIS or CDC Ether. When CDC Ether is used, devices of the same type are, as with RNDIS, exported with the same, bogus random MAC address. In addition, the devices (at least on all firmware revisions I have found) use the bogus MAC when sending traffic routed from external networks. And as a final feature, the devices sometimes export the link state incorrectly. There are also references online to several other ZTE devices displaying this behavior, with several different PIDs and MAC addresses. This patch tries to improve the handling of ZTE devices by doing the following: * Create a new driver_info-struct that is used by ZTE devices that do not have an explicit entry in the product table. This struct is the same as the default cdc_ether driver info, but a new bind- and an rx_fixup-function have been added. * In the new bind function, we check if we have read a random MAC from the device. If we have, then we generate a new random MAC address. This will ensure that all devices get a unique MAC. * The rx_fixup-function replaces the destination MAC address in the skb with that of the device. I have not seen a revision of these devices that behaves correctly (i.e., sets the right destination MAC), so I chose not to do any comparison with for example the known, bogus addresses. * The MF823/MF832/MF910 sometimes export cdc carrier on twice on connect (the correct behavior is off then on). Work around this by manually setting carrier to off if an on-notification is received and the NOCARRIER-bit is not set. This change will affect all devices, but it should take care of similar mistakes made by other manufacturers. I tried to think of/look/test for problems/regressions that could be introduced by this behavior, but could not find any. However, my familiarity with this code path is not that great, so there could be something I have overlooked. I have tested this patch with multiple revisions of all three devices, and they behave as expected. In other words, they all got a valid, random MAC, the correct operational state and I can receive/sent traffic without problems. I also tested with some other cdc_ether devices I have and did not find any problems/regressions caused by the two general changes. v3->v4: * Forgot to remove unused variables, sorry about that (thanks David Miller). v2->v3: * I had forgot to remove the random MAC generation from usbnet_cdc_bind() (thanks Oliver). * Rework logic in the ZTE bind-function a bit. v1->v2: * Only generate random MAC for ZTE devices (thanks Oliver Neukum). * Set random MAC and do RX fixup for all ZTE devices that do not have a product-entry, as the bogus MAC have been seen on devices with several different PIDs/MAC addresses. In other words, it seems to be the default behavior of ZTE CDC Ether devices (thanks Lars Melin). Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next, they are: 1) Count pre-established connections as active in "least connection" schedulers such that pre-established connections to avoid overloading backend servers on peak demands, from Michal Kubecek via Simon Horman. 2) Address a race condition when resizing the conntrack table by caching the bucket size when fulling iterating over the hashtable in these three possible scenarios: 1) dump via /proc/net/nf_conntrack, 2) unlinking userspace helper and 3) unlinking custom conntrack timeout. From Liping Zhang. 3) Revisit early_drop() path to perform lockless traversal on conntrack eviction under stress, use del_timer() as synchronization point to avoid two CPUs evicting the same entry, from Florian Westphal. 4) Move NAT hlist_head to nf_conn object, this simplifies the existing NAT extension and it doesn't increase size since recent patches to align nf_conn, from Florian. 5) Use rhashtable for the by-source NAT hashtable, also from Florian. 6) Don't allow --physdev-is-out from OUTPUT chain, just like --physdev-out is not either, from Hangbin Liu. 7) Automagically set on nf_conntrack counters if the user tries to match ct bytes/packets from nftables, from Liping Zhang. 8) Remove possible_net_t fields in nf_tables set objects since we just simply pass the net pointer to the backend set type implementations. 9) Fix possible off-by-one in h323, from Toby DiPasquale. 10) early_drop() may be called from ctnetlink patch, so we must hold rcu read size lock from them too, this amends Florian's patch #3 coming in this batch, from Liping Zhang. 11) Use binary search to validate jump offset in x_tables, this addresses the O(n!) validation that was introduced recently resolve security issues with unpriviledge namespaces, from Florian. 12) Fix reference leak to connlabel in error path of nft_ct, from Zhang. 13) Three updates for nft_log: Fix log prefix leak in error path. Bail out on loglevel larger than debug in nft_log and set on the new NF_LOG_F_COPY_LEN flag when snaplen is specified. Again from Zhang. 14) Allow to filter rule dumps in nf_tables based on table and chain names. 15) Simplify connlabel to always use 128 bits to store labels and get rid of unused function in xt_connlabel, from Florian. 16) Replace set_expect_timeout() by mod_timer() from the h323 conntrack helper, by Gao Feng. 17) Put back x_tables module reference in nft_compat on error, from Liping Zhang. 18) Add a reference count to the x_tables extensions cache in nft_compat, so we can remove them when unused and avoid a crash if the extensions are rmmod, again from Zhang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Jul, 2016 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Jul, 2016 25 commits
-
-
Liping Zhang authored
We "cache" the loaded match/target modules and reuse them, but when the modules are removed, we still point to them. Then we may end up with invalid memory references when using iptables-compat to add rules later. Input the following commands will reproduce the kernel crash: # iptables-compat -A INPUT -j LOG # iptables-compat -D INPUT -j LOG # rmmod xt_LOG # iptables-compat -A INPUT -j LOG BUG: unable to handle kernel paging request at ffffffffa05a9010 IP: [<ffffffff813f783e>] strcmp+0xe/0x30 Call Trace: [<ffffffffa05acc43>] nft_target_select_ops+0x83/0x1f0 [nft_compat] [<ffffffffa058a177>] nf_tables_expr_parse+0x147/0x1f0 [nf_tables] [<ffffffffa058e541>] nf_tables_newrule+0x301/0x810 [nf_tables] [<ffffffff8141ca00>] ? nla_parse+0x20/0x100 [<ffffffffa057fa8f>] nfnetlink_rcv+0x33f/0x53d [nfnetlink] [<ffffffffa057f94b>] ? nfnetlink_rcv+0x1fb/0x53d [nfnetlink] [<ffffffff817116b8>] netlink_unicast+0x178/0x220 [<ffffffff81711a5b>] netlink_sendmsg+0x2fb/0x3a0 [<ffffffff816b7fc8>] sock_sendmsg+0x38/0x50 [<ffffffff816b8a7e>] ___sys_sendmsg+0x28e/0x2a0 [<ffffffff816bcb7e>] ? release_sock+0x1e/0xb0 [<ffffffff81804ac5>] ? _raw_spin_unlock_bh+0x35/0x40 [<ffffffff816bcbe2>] ? release_sock+0x82/0xb0 [<ffffffff816b93d4>] __sys_sendmsg+0x54/0x90 [<ffffffff816b9422>] SyS_sendmsg+0x12/0x20 [<ffffffff81805172>] entry_SYSCALL_64_fastpath+0x1a/0xa9 So when nobody use the related match/target module, there's no need to "cache" it. And nft_[match|target]_release are useless anymore, remove them. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Liping Zhang authored
If the user specify the invalid NFTA_MATCH_INFO/NFTA_TARGET_INFO attr or memory alloc fail, we should call module_put to the related match or target. Otherwise, we cannot remove the module even nobody use it. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Gao Feng authored
Simplify the code without any side effect. The set_expect_timeout is used to modify the timer expired time. It tries to delete timer, and add it again. So we could use mod_timer directly. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix memory leak in nftables, from Liping Zhang. 2) Need to check result of vlan_insert_tag() in batman-adv otherwise we risk NULL skb derefs, from Sven Eckelmann. 3) Check for dev_alloc_skb() failures in cfg80211, from Gregory Greenman. 4) Handle properly when we have ppp_unregister_channel() happening in parallel with ppp_connect_channel(), from WANG Cong. 5) Fix DCCP deadlock, from Eric Dumazet. 6) Bail out properly in UDP if sk_filter() truncates the packet to be smaller than even the space that the protocol headers need. From Michal Kubecek. 7) Similarly for rose, dccp, and sctp, from Willem de Bruijn. 8) Make TCP challenge ACKs less predictable, from Eric Dumazet. 9) Fix infinite loop in bgmac_dma_tx_add() from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) packet: propagate sock_cmsg_send() error net/mlx5e: Fix del vxlan port command buffer memset packet: fix second argument of sock_tx_timestamp() net: switchdev: change ageing_time type to clock_t Update maintainer for EHEA driver. net/mlx4_en: Add resilience in low memory systems net/mlx4_en: Move filters cleanup to a proper location sctp: load transport header after sk_filter net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata net: nb8800: Fix SKB leak in nb8800_receive() et131x: Fix logical vs bitwise check in et131x_tx_timeout() vlan: use a valid default mtu value for vlan over macsec net: bgmac: Fix infinite loop in bgmac_dma_tx_add() mlxsw: spectrum: Prevent invalid ingress buffer mapping mlxsw: spectrum: Prevent overwrite of DCB capability fields mlxsw: spectrum: Don't emit errors when PFC is disabled mlxsw: spectrum: Indicate support for autonegotiation mlxsw: spectrum: Force link training according to admin state r8152: add MODULE_VERSION ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs fixes from Miklos Szeredi: "This contains a fix for a potential crash/corruption issue and another where the suid/sgid bits weren't cleared on write" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: verify upper dentry in ovl_remove_and_whiteout() ovl: Copy up underlying inode's ->i_mode to overlay inode ovl: handle ATTR_KILL*
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "Five fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: pps: do not crash when failed to register tools/vm/slabinfo: fix an unintentional printf testing/radix-tree: fix a macro expansion bug radix-tree: fix radix_tree_iter_retry() for tagged iterators. mm: memcontrol: fix cgroup creation failure after many small jobs
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull intel kabylake drm fixes from Dave Airlie: "As mentioned Intel has gathered all the Kabylake fixes from -next, which we've enabled in 4.7 for the first time, these are pretty much limited in scope to only affects kabylake, which is hw that isn't shipping yet. So I'm mostly okay with it going in now. If we don't land this, it might be a good idea to disable kabylake support in 4.7 before we ship" * tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of git://people.freedesktop.org/~airlied/linux: (28 commits) drm/i915/kbl: Introduce the first official DMC for Kabylake. drm/i915: Introduce Kabypoint PCH for Kabylake H/DT. drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance drm/i195/fbc: Add WaFbcNukeOnHostModify drm/i915/gen9: Add WaFbcWakeMemOn drm/i915/gen9: Add WaFbcTurnOffFbcWatermark drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch drm/i915/gen9: Add WaEnableChickenDCPR drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing drm/i915/kbl: Add WaDisableGafsUnitClkGating drm/i915/kbl: Add WaForGAMHang drm/i915: Add WaInsertDummyPushConstP for bxt and kbl drm/i915/kbl: Add WaDisableDynamicCreditSharing drm/i915/kbl: Add WaDisableGamClockGating drm/i915/gen9: Enable must set chicken bits in config0 reg drm/i915/kbl: Add WaDisableLSQCROPERFforOCL drm/i915/kbl: Add WaDisableSDEUnitClockGating drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0 drm/i915/kbl: Add WaEnableGapsTsvCreditFix ...
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Two i915 regression fixes. Intel have submitted some Kabylake fixes I'll send separately, since this is the first kernel with kabylake support and they don't go much outside that area I think they should be fine" * tag 'drm-fixes-for-v4.7-rc8-intel' of git://people.freedesktop.org/~airlied/linux: drm/i915: add missing condition for committing planes on crtc drm/i915: Treat eDP as always connected, again
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k upddates from Geert Uytterhoeven: - assorted spelling fixes - defconfig updates * tag 'm68k-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Update defconfigs for v4.7-rc2 m68k: Assorted spelling fixes
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A handful of fixes before final release: Marvell Armada: - One to fix a typo in the devicetree specifying memory ranges for the crypto engine - Two to deal with marking PCI and device-memory as strongly ordered to avoid hardware deadlocks, in particular when enabling above crypto driver. - Compile fix for PM Allwinner: - DT clock fixes to deal with u-boot-enabled framebuffer (simplefb). - Make R8 (C.H.I.P. SoC) inherit system compatibility from A13 to make clocks register proper. Tegra: - Fix SD card voltage setting on the Tegra3 Beaver dev board Misc: - Two maintainers updates for STM32 and STi platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: beaver: Allow SD card voltage to be changed MAINTAINERS: update STi maintainer list MAINTAINERS: update STM32 maintainers list ARM: mvebu: compile pm code conditionally ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys ARM: mvebu: map PCI I/O regions strongly ordered ARM: mvebu: fix HW I/O coherency related deadlocks ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a sporadic build failure in the qat driver as well as a memory corruption bug in rsa-pkcs1pad" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct crypto: qat - make qat_asym_algs.o depend on asn1 headers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull key handling fixes from James Morris: "Quoting David Howells: Here are three miscellaneous fixes: (1) Fix a panic in some debugging code in PKCS#7. This can only happen by explicitly inserting a #define DEBUG into the code. (2) Fix the calculation of the digest length in the PE file parser. This causes a failure where there should be a success. (3) Fix the case where an X.509 cert can be added as an asymmetric key to a trusted keyring with no trust restriction if no AKID is supplied. Bugs (1) and (2) aren't particularly problematic, but (3) allows a security check to be bypassed. Happily, this is a recent regression and never made it into a released kernel" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Fix for erroneous trust of incorrectly signed X.509 certs pefile: Fix the failure of calculation for digest PKCS#7: Fix panic when referring to the empty AKID when DEBUG defined
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "A few more fixes for the input subsystem: - restore naming for tsc2005 touchscreens as some userspace match on it - fix out of bound access in legacy keyboard driver - fixup in RMI4 driver Everything is tagged for stable as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: tsc200x - report proper input_dev name tty/vt/keyboard: fix OOB access in do_compute_shiftstate() Input: synaptics-rmi4 - fix maximum size check for F12 control register 8
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fix from Dan Williams: "This contains a regression fix for a problem that was introduced in v4.7-rc6. In 4.7-rc1 we introduced auto-probing for the ACPI DSM (device- specific-method) format that the platform firmware implements for nvdimm devices. We initially fixed a regression in probing the QEMU DSM implementation by making acpi_check_dsm() tolerant of the way QEMU reports the "0 DSMs supported" condition. However, that broke HPE platforms since that tolerance caused the driver to mistakenly match the 1-zero-byte response those platforms give to "unknown" commands. Instead, we simply make the driver tolerant of not finding any supported DSMs. This has been tested to work with both QEMU and HPE platforms. This commit has appeared in a -next release with no reported issues" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: make DIMM DSMs optional
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fix from Linus Walleij: "Compile problem fix for Tegra, Sorry to send this in the last minute but Ingo says this build failure is very prominent so I'm not going to wait for v4.7 before sending it. It is a case of COMPILE_TEST causing more problems than it solves and I'm already swearing about me shooting myself in the foot with that gun :(" * tag 'gpio-v4.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra: don't auto-enable for COMPILE_TEST
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Michael Turquette: "Fix a bug in the at91 clk driver, two compile time warnings in sunxi clk drivers, and one bug in a sunxi clk driver introduced in the 4.7 merge window" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: at91: fix clk_programmable_set_parent() clk: sunxi: remove unused variable clk: sunxi: display: Add per-clock flags clk: sunxi: tcon-ch1: Do not return a negative error in get_parent
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fix from Tejun Heo: "Another fallout from max_sectors bump a couple years ago. The lite-on optical drive times out on large requests" * 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: LITE-ON CX1-JB256-HP needs lower max_sectors
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "Here are a few late mmc fixes intended for v4.7 final. MMC core: - Fix eMMC packed command header endianness - Fix free of uninitialized buffer for mmc ioctl MMC host: - pxamci: Fix potential oops in ->probe()" * tag 'mmc-v4.7-rc7' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: pxamci: fix potential oops mmc: block: fix packed command header endianness mmc: block: fix free of uninitialized 'idata->buf'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "No surprise, just a few small fixes: a couple of changes are seen in the core part, and both of them are rather for unusual error paths. The rest are the regular HD-audio fixes and one USB-audio regression fix" * tag 'sound-4.7-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Fix quirks code is not called ALSA: hda: add AMD Stoney PCI ID with proper driver caps ALSA: hda - fix use-after-free after module unload ALSA: pcm: Free chmap at PCM free callback, too ALSA: ctl: Stop notification after disconnection ALSA: hda/realtek - add new pin definition in alc225 pin quirk table
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull NVMe fix from Jens Axboe: "Late addition here, it's basically a revert of a patch that was added in this merge window, but has proven to cause problems. This is swapping out the RCU based namespace protection with a good old mutex instead" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: Remove RCU namespace protection
-
Jiri Slaby authored
With this command sequence: modprobe plip modprobe pps_parport rmmod pps_parport the partport_pps modules causes this crash: BUG: unable to handle kernel NULL pointer dereference at (null) IP: parport_detach+0x1d/0x60 [pps_parport] Oops: 0000 [#1] SMP ... Call Trace: parport_unregister_driver+0x65/0xc0 [parport] SyS_delete_module+0x187/0x210 The sequence that builds up to this is: 1) plip is loaded and takes the parport device for exclusive use: plip0: Parallel port at 0x378, using IRQ 7. 2) pps_parport then fails to grab the device: pps_parport: parallel port PPS client parport0: cannot grant exclusive access for device pps_parport pps_parport: couldn't register with parport0 3) rmmod of pps_parport is then killed because it tries to access pardev->name, but pardev (taken from port->cad) is NULL. So add a check for NULL in the test there too. Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.czSigned-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
The curly braces are missing here so we print stuff unintentionally. Fixes: 9da4714a ('slub: slabinfo update for cmpxchg handling') Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwandaSigned-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
There are no parentheses around this macro and it causes a problem when we do: index = rand() % THRASH_SIZE; Link: http://lkml.kernel.org/r/20160715210953.GC19522@mwandaSigned-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrey Ryabinin authored
radix_tree_iter_retry() resets slot to NULL, but it doesn't reset tags. Then NULL slot and non-zero iter.tags passed to radix_tree_next_slot() leading to crash: RIP: radix_tree_next_slot include/linux/radix-tree.h:473 find_get_pages_tag+0x334/0x930 mm/filemap.c:1452 .... Call Trace: pagevec_lookup_tag+0x3a/0x80 mm/swap.c:960 mpage_prepare_extent_to_map+0x321/0xa90 fs/ext4/inode.c:2516 ext4_writepages+0x10be/0x2b20 fs/ext4/inode.c:2736 do_writepages+0x97/0x100 mm/page-writeback.c:2364 __filemap_fdatawrite_range+0x248/0x2e0 mm/filemap.c:300 filemap_write_and_wait_range+0x121/0x1b0 mm/filemap.c:490 ext4_sync_file+0x34d/0xdb0 fs/ext4/fsync.c:115 vfs_fsync_range+0x10a/0x250 fs/sync.c:195 vfs_fsync fs/sync.c:209 do_fsync+0x42/0x70 fs/sync.c:219 SYSC_fdatasync fs/sync.c:232 SyS_fdatasync+0x19/0x20 fs/sync.c:230 entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207 We must reset iterator's tags to bail out from radix_tree_next_slot() and go to the slow-path in radix_tree_next_chunk(). Fixes: 46437f9a ("radix-tree: fix race in gang lookup") Link: http://lkml.kernel.org/r/1468495196-10604-1-git-send-email-aryabinin@virtuozzo.comSigned-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
The memory controller has quite a bit of state that usually outlives the cgroup and pins its CSS until said state disappears. At the same time it imposes a 16-bit limit on the CSS ID space to economically store IDs in the wild. Consequently, when we use cgroups to contain frequent but small and short-lived jobs that leave behind some page cache, we quickly run into the 64k limitations of outstanding CSSs. Creating a new cgroup fails with -ENOSPC while there are only a few, or even no user-visible cgroups in existence. Although pinning CSSs past cgroup removal is common, there are only two instances that actually need an ID after a cgroup is deleted: cache shadow entries and swapout records. Cache shadow entries reference the ID weakly and can deal with the CSS having disappeared when it's looked up later. They pose no hurdle. Swap-out records do need to pin the css to hierarchically attribute swapins after the cgroup has been deleted; though the only pages that remain swapped out after offlining are tmpfs/shmem pages. And those references are under the user's control, so they are manageable. This patch introduces a private 16-bit memcg ID and switches swap and cache shadow entries over to using that. This ID can then be recycled after offlining when the CSS remains pinned only by objects that don't specifically need it. This script demonstrates the problem by faulting one cache page in a new cgroup and deleting it again: set -e mkdir -p pages for x in `seq 128000`; do [ $((x % 1000)) -eq 0 ] && echo $x mkdir /cgroup/foo echo $$ >/cgroup/foo/cgroup.procs echo trex >pages/$x echo $$ >/cgroup/cgroup.procs rmdir /cgroup/foo done When run on an unpatched kernel, we eventually run out of possible IDs even though there are no visible cgroups: [root@ham ~]# ./cssidstress.sh [...] 65000 mkdir: cannot create directory '/cgroup/foo': No space left on device After this patch, the IDs get released upon cgroup destruction and the cache and css objects get released once memory reclaim kicks in. [hannes@cmpxchg.org: init the IDR] Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org Fixes: b2052564 ("mm: memcontrol: continue cache reclaim from offlined groups") Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: John Garcia <john.garcia@mesosphere.io> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Nikolay Borisov <kernel@kyup.com> Cc: <stable@vger.kernel.org> [3.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-