- 24 Jan, 2020 5 commits
-
-
Hou Pengyang authored
commit f42c85e7 moved tracepoint's ftrace creation into include/trace/ftrace.h and trace/define_trace.h was deleted as a result. However some comment info does not adapt to the change, which is such a misguiding when reading related code. This patch fix this by moving trace/trace_events.h to <trace/events/XXX.h>, since tracepoint headers have already been moved to tarce/events/. Link: http://lkml.kernel.org/r/1425419298-61941-1-git-send-email-houpengyang@huawei.comSigned-off-by:
Hou Pengyang <houpengyang@huawei.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Dan Carpenter authored
We checked "iter->trace" earlier so there is no need to check here. Link: http://lkml.kernel.org/r/20141122183012.GB6994@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Josef Bacik authored
I noticed when trying to use the trace-cmd python interface that reading the raw buffer wasn't working for kernel_stack events. This is because it uses a stubbed version of __dynamic_array that doesn't do the __data_loc trick and encode the length of the array into the field. Instead it just shows up as a size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES since this is what we actually do in practice and matches how user_stack_trace works. Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.comSigned-off-by:
Josef Bacik <jbacik@fb.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Luis Henriques authored
tracing_stat_init() was always returning '0', even on the error paths. It now returns -ENODEV if tracing_init_dentry() fails or -ENOMEM if it fails to created the 'trace_stat' debugfs directory. Link: http://lkml.kernel.org/r/1410299381-20108-1-git-send-email-luis.henriques@canonical.com Fixes: ed6f1c99 ("tracing: Check return value of tracing_init_dentry()") Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by:
-
Steven Rostedt (VMware) authored
Looking through old emails in my INBOX, I came across a patch from Luis Henriques that attempted to fix a race of two stat tracers registering the same stat trace (extremely unlikely, as this is done in the kernel, and probably doesn't even exist). The submitted patch wasn't quite right as it needed to deal with clean up a bit better (if two stat tracers were the same, it would have the same files). But to make the code cleaner, all we needed to do is to keep the all_stat_sessions_mutex held for most of the registering function. Link: http://lkml.kernel.org/r/1410299375-20068-1-git-send-email-luis.henriques@canonical.com Fixes: 002bb86d ("tracing/ftrace: separate events tracing and stats tracing engine") Reported-by:
-
- 22 Jan, 2020 2 commits
-
-
Alex Shi authored
This limitation are never lunched from introduce commit 970988e1 ("tracing/kprobe: Add kprobe_event= boot parameter") Could we remove it if no intention to implement it? Link: http://lkml.kernel.org/r/1579586075-45132-1-git-send-email-alex.shi@linux.alibaba.comAcked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
If we exit due to a bad input to trace_printk() (highly unlikely), then the buffer variable will not be initialized when we unnest the ring buffer. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
- 21 Jan, 2020 9 commits
-
-
Dan Carpenter authored
The trace_array_get_by_name() function doesn't return error pointers, it returns NULL on error. Link: http://lkml.kernel.org/r/20200117053007.5h2juv272pokqhtq@kili.mountain Fixes: 4f712a4d ("tracing/boot: Add instance node support") Acked-by:
-
Alex Shi authored
This macro isn't used from commit 3a161d99 ("tracing: Create seq_buf layer in trace_seq"). so no needs to keep it. Link: http://lkml.kernel.org/r/1579586086-45543-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
This macro isn't used since commit d325c402 ("ring-buffer: Remove unused function ring_buffer_page_len()"), so better to remove it. Link: http://lkml.kernel.org/r/1579586080-45300-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Colin Ian King authored
There are two spelling mistakes in printf statements, fix these. Link: http://lkml.kernel.org/r/20200116092206.52192-1-colin.king@canonical.comAcked-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Masami Hiramatsu authored
Fix typos in boottime-trace.rst according to Randy's suggestions. Link: http://lkml.kernel.org/r/157949060335.25888.13153184562531693684.stgit@devnote2Suggested-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
-
Masami Hiramatsu authored
Fix typos in bootconfig.rst according to Randy's suggestions. Link: http://lkml.kernel.org/r/157949059219.25888.16939971423610233631.stgit@devnote2Suggested-by:
-
Masami Hiramatsu authored
Fix Kconfig help message since the bootconfig file is only available to be appended to initramfs. And also add a reference to the documentation. Link: http://lkml.kernel.org/r/157949058031.25888.18399447161895787505.stgit@devnote2Reported-by:
-
Alex Shi authored
This macro isn't used from commit cb7be3b2 ("ftrace: remove daemon"). So no needs to keep it. Link: http://lkml.kernel.org/r/1579586063-44984-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Alex Shi authored
These 2 macros aren't used from commit eee8ded1 ("ftrace: Have the function probes call their own function"), so remove them. Link: http://lkml.kernel.org/r/1579585807-43316-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
- 16 Jan, 2020 1 commit
-
-
Steven Rostedt (VMware) authored
trace_printk() is used to debug the kernel which includes the tracing infrastructure. But because it writes to the ring buffer, and so does much of the tracing infrastructure, the ring buffer's recursive detection will drop writes to the ring buffer that is in the same context as the current write is happening (it allows interrupts to write when normal context is writing, but wont let normal context write while normal context is writing). This can cause confusion and think that the code is where the trace_printk() exists is not hit. To solve this, up the recursive nesting of the ring buffer when trace_printk() is called before it writes to the buffer itself. Note, this does make it dangerous to use trace_printk() in the ring buffer code itself, because this basically disables the recursion protection of trace_printk() buffer writes. But as trace_printk() is only used for debugging, and if this does occur, the developer will see the cause real quick (recursive blowing up of the stack). Thus the developer can deal with that. But having trace_printk() silently ignored is a much bigger problem, and disabling recursive protection is a small price to pay to fix it. Signed-off-by:
-
- 14 Jan, 2020 2 commits
-
-
Steven Rostedt (VMware) authored
rb_update_event has changed without the kernel-doc update. Signed-off-by: -
Fabian Frederick authored
Also fixes a couple of typos Link: http://lkml.kernel.org/r/1401992525-10417-1-git-send-email-fabf@skynet.be Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Fabian Frederick <fabf@skynet.be> [ Found this deep in the abyss of my INBOX ] Signed-off-by:
-
- 13 Jan, 2020 21 commits
-
-
Masami Hiramatsu authored
With CONFIG_PROVE_RCU_LIST, I had many suspicious RCU warnings when I ran ftracetest trigger testcases. ----- # dmesg -c > /dev/null # ./ftracetest test.d/trigger ... # dmesg | grep "RCU-list traversed" | cut -f 2 -d ] | cut -f 2 -d " " kernel/trace/trace_events_hist.c:6070 kernel/trace/trace_events_hist.c:1760 kernel/trace/trace_events_hist.c:5911 kernel/trace/trace_events_trigger.c:504 kernel/trace/trace_events_hist.c:1810 kernel/trace/trace_events_hist.c:3158 kernel/trace/trace_events_hist.c:3105 kernel/trace/trace_events_hist.c:5518 kernel/trace/trace_events_hist.c:5998 kernel/trace/trace_events_hist.c:6019 kernel/trace/trace_events_hist.c:6044 kernel/trace/trace_events_trigger.c:1500 kernel/trace/trace_events_trigger.c:1540 kernel/trace/trace_events_trigger.c:539 kernel/trace/trace_events_trigger.c:584 ----- I investigated those warnings and found that the RCU-list traversals in event trigger and hist didn't need to use RCU version because those were called only under event_mutex. I also checked other RCU-list traversals related to event trigger list, and found that most of them were called from event_hist_trigger_func() or hist_unregister_trigger() or register/unregister functions except for a few cases. Replace these unneeded RCU-list traversals with normal list traversal macro and lockdep_assert_held() to check the event_mutex is held. Link: http://lkml.kernel.org/r/157680910305.11685.15110237954275915782.stgit@devnote2Reviewed-by:
Tom Zanussi <zanussi@kernel.org> Signed-off-by:
-
Masami Hiramatsu authored
Add a documentation about boot-time tracing options in boot config. Link: http://lkml.kernel.org/r/157867246028.17873.8047384554383977870.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add below function-tracer filter options to boot-time tracing. - ftrace.[instance.INSTANCE.]ftrace.filters This will take an array of tracing function filter rules - ftrace.[instance.INSTANCE.]ftrace.notraces This will take an array of NON-tracing function filter rules Link: http://lkml.kernel.org/r/157867244841.17873.10933616628243103561.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add ftrace.cpumask option support to boot-time tracing. This sets cpumask for each instance. - ftrace.[instance.INSTANCE.]cpumask = CPUMASK; Set the trace cpumask. Note that the CPUMASK should be a string which <tracefs>/tracing_cpumask can accepts. Link: http://lkml.kernel.org/r/157867243625.17873.13613922641273149372.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add instance node support to boot-time tracing. User can set some options and event nodes under instance node. - ftrace.instance.INSTANCE[...] Add new INSTANCE instance. Some options and event nodes are acceptable for instance node. Link: http://lkml.kernel.org/r/157867242413.17873.9814204526141500278.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add synthetic event node support to boot time tracing. The synthetic event is a kind of event node, but the group name is "synthetic". - ftrace.event.synthetic.EVENT.fields = FIELD[, FIELD2...] Defines new synthetic event with FIELDs. Each field should be "type varname". The synthetic node requires "fields" string arraies, which defines the fields as same as tracing/synth_events interface. Link: http://lkml.kernel.org/r/157867241236.17873.12411615143321557709.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add kprobe event support on event node to boot-time tracing. If the group name of event is "kprobes", the boot-time tracing defines new probe event according to "probes" values. - ftrace.event.kprobes.EVENT.probes = PROBE[, PROBE2...] Defines new kprobe event based on PROBEs. It is able to define multiple probes on one event, but those must have same type of arguments. For example, ftrace.events.kprobes.myevent { probes = "vfs_read $arg1 $arg2"; enable; } This will add kprobes:myevent on vfs_read with the 1st and the 2nd arguments. Link: http://lkml.kernel.org/r/157867240104.17873.9712052065426433111.stgit@devnote2Signed-off-by: -
Masami Hiramatsu authored
Add per-event settings for boottime tracing. User can set filter, actions and enable on each event on boot. The event entries are under ftrace.event.GROUP.EVENT node (note that the option key includes event's group name and event name.) This supports below configs. - ftrace.event.GROUP.EVENT.enable Enables GROUP:EVENT tracing. - ftrace.event.GROUP.EVENT.filter = FILTER Set FILTER rule to the GROUP:EVENT. - ftrace.event.GROUP.EVENT.actions = ACTION[, ACTION2...] Set ACTIONs to the GROUP:EVENT. For example, ftrace.event.sched.sched_process_exec { filter = "pid < 128" enable } this will enable tracing "sched:sched_process_exec" event with "pid < 128" filter. Link: http://lkml.kernel.org/r/157867238942.17873.11177628789184546198.stgit@devnote2Signed-off-by: -
Masami Hiramatsu authored
Setup tracing options via extra boot config in addition to kernel command line. This adds following commands support. These are applied to the global trace instance. - ftrace.options = OPT1[,OPT2...] Enable given ftrace options. - ftrace.trace_clock = CLOCK Set given CLOCK to ftrace's trace_clock. - ftrace.buffer_size = SIZE Configure ftrace buffer size to SIZE. You can use "KB" or "MB" for that SIZE. - ftrace.events = EVENT[, EVENT2...] Enable given events on boot. You can use a wild card in EVENT. - ftrace.tracer = TRACER Set TRACER to current tracer on boot. (e.g. function) Note that this is NOT replacing the kernel parameters, because this boot config based setting is later than that. If you want to trace earlier boot events, you still need kernel parameters. Link: http://lkml.kernel.org/r/157867237723.17873.17494943526320587488.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add NULL trace-array check in print_synth_event(), because if we enable tp_printk option, iter->tr can be NULL. Link: http://lkml.kernel.org/r/157867236536.17873.12529350542460184019.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Make the synthetic event accepts a different type field to record. However, the size and signed flag must be same. Link: http://lkml.kernel.org/r/157867235358.17873.61732996461602171.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Register kprobe event to dynevent in subsys_initcall level. This will allow kernel to register new kprobe events in fs_initcall level via trace_run_command. Link: http://lkml.kernel.org/r/157867234213.17873.18039000024374948737.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Since kprobe-events use event_trigger_unlock_commit_regs() directly, that events doesn't show up in printk buffer if "tp_printk" is set. Use trace_event_buffer_commit() in kprobe events so that it can invoke output_printk() as same as other trace events. Link: http://lkml.kernel.org/r/157867233085.17873.5210928676787339604.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Apply soft-disabled and the filter rule of the trace events to the printk output of tracepoints (a.k.a. tp_printk kernel parameter) as same as trace buffer output. Link: http://lkml.kernel.org/r/157867231876.17873.15825819592284704068.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add a documentation for extended boot config under admin-guide, since it is including the syntax of boot config. Link: http://lkml.kernel.org/r/157867230658.17873.9309879174829924324.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Since the current kernel command line is too short to describe long and many options for init (e.g. systemd command line options), this allows admin to use boot config for init command line. All init command line under "init." keywords will be passed to init. For example, init.systemd { unified_cgroup_hierarchy = 1 debug_shell default_timeout_start_sec = 60 } Link: http://lkml.kernel.org/r/157867229521.17873.654222294326542349.stgit@devnote2Signed-off-by: -
Masami Hiramatsu authored
Since the current kernel command line is too short to describe many options which supported by kernel, allow user to use boot config to setup (add) the command line options. All kernel parameters under "kernel." keywords will be used for setting up extra kernel command line. For example, kernel { audit = on audit_backlog_limit = 256 } Note that you can not specify some early parameters (like console etc.) by this method, since it is loaded after early parameters parsed. Link: http://lkml.kernel.org/r/157867228333.17873.11962796367032622466.stgit@devnote2Signed-off-by: -
Masami Hiramatsu authored
Since initcall_command_line is used as a temporary buffer, it could be freed after usage. Allocate it in do_initcall() and free it after used. Link: http://lkml.kernel.org/r/157867227145.17873.17513760552008505454.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add /proc/bootconfig which shows the list of key-value pairs in boot config. Since after boot, all boot configs and tree are removed, this interface just keep a copy of key-value pairs in text. Link: http://lkml.kernel.org/r/157867225967.17873.12155805787236073787.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add a bootconfig test script to ensure the tool and boot config parser are working correctly. Link: http://lkml.kernel.org/r/157867224728.17873.18114241801246589416.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
Add "bootconfig" command which operates the bootconfig config-data on initrd image. User can add/delete/verify the boot config on initrd image using this command. e.g. Add a boot config to initrd image # bootconfig -a myboot.conf /boot/initrd.img Remove it. # bootconfig -d /boot/initrd.img Or verify (and show) it. # bootconfig /boot/initrd.img Link: http://lkml.kernel.org/r/157867223582.17873.14342161849213219982.stgit@devnote2Signed-off-by:
-
