- 09 Jun, 2020 29 commits
-
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level argument to dump_mem() as a preparation to introduce show_stack_loglvl(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
Dmitry Safonov <dima@arista.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200418201944.482088-30-dima@arista.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level parameter to microblaze_unwind() as a preparation to add show_stack_loglvl(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level argument to microblaze_unwind_inner() as a preparation for introducing show_stack_loglvl(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level argument to ia64_do_show_stack() as a preparation to introduce show_stack_loglvl(). Also, make ia64_do_show_stack() static as it's not used outside. [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). As a good side-effect die() now prints the stacktrace with KERN_EMERG aligned with other messages. [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
Brian Cain <bcain@codeaurora.org> Link: http://lkml.kernel.org/r/20200418201944.482088-15-dima@arista.comSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level argument to dump_backtrace() as a preparation for introducing show_stack_loglvl(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Now that c_backtrace() always emits correct loglvl, use it for printing. [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level argument to dump_backtrace() as a preparation for introducing show_stack_loglvl(). As a good side-effect __die() now prints not only "Stack:" header with KERN_EMERG, but the backtrace itself. [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level argument to unwind_backtrace() as a preparation for introducing show_stack_loglvl(). As a good side-effect arm_syscall() is now printing errors with the same log level as the backtrace. [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Add log level argument to c_backtrace() as a preparation for introducing show_stack_loglvl(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). As a good side-effect header "Stack Trace:" is now printed with the same log level as the rest of backtrace. [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Currently, the log-level of show_stack() depends on a platform realization. It creates situations where the headers are printed with lower log level or higher than the stacktrace (depending on a platform or user). Furthermore, it forces the logic decision from user to an architecture side. In result, some users as sysrq/kdb/etc are doing tricks with temporary rising console_loglevel while printing their messages. And in result it not only may print unwanted messages from other CPUs, but also omit printing at all in the unlucky case where the printk() was deferred. Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier approach than introducing more printk buffers. Also, it will consolidate printings with headers. Introduce show_stack_loglvl(), that eventually will substitute show_stack(). [1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#uSigned-off-by:
-
Dmitry Safonov authored
Patch series "Add log level to show_stack()", v3. Add log level argument to show_stack(). Done in three stages: 1. Introducing show_stack_loglvl() for every architecture 2. Migrating old users with an explicit log level 3. Renaming show_stack_loglvl() into show_stack() Justification: - It's a design mistake to move a business-logic decision into platform realization detail. - I have currently two patches sets that would benefit from this work: Removing console_loglevel jumps in sysrq driver [1] Hung task warning before panic [2] - suggested by Tetsuo (but he probably didn't realise what it would involve). - While doing (1), (2) the backtraces were adjusted to headers and other messages for each situation - so there won't be a situation when the backtrace is printed, but the headers are missing because they have lesser log level (or the reverse). - As the result in (2) plays with console_loglevel for kdb are removed. The least important for upstream, but maybe still worth to note that every company I've worked in so far had an off-list patch to print backtrace with the needed log level (but only for the architecture they cared about). If you have other ideas how you will benefit from show_stack() with a log level - please, reply to this cover letter. See also discussion on v1: https://lore.kernel.org/linux-riscv/20191106083538.z5nlpuf64cigxigh@pathway.suse.cz/ This patch (of 50): print_ip_sym() needs to have a log level parameter to comply with other parts being printed. Otherwise, half of the expected backtrace would be printed and other may be missing with some logging level. The following callee(s) are using now the adjusted log level: - microblaze/unwind: the same level as headers & userspace unwind. Note that pr_debug()'s there are for debugging the unwinder itself. - nds32/traps: symbol addresses are printed with the same log level as backtrace headers. - lockdep: ip for locking issues is printed with the same log level as other part of the warning. - sched: ip where preemption was disabled is printed as error like the rest part of the message. - ftrace: bug reports are now consistent in the log level being used. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Ben Segall <bsegall@google.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Will Deacon <will@kernel.org> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Dmitry Safonov <dima@arista.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20200418201944.482088-2-dima@arista.comSigned-off-by:
-
- 08 Jun, 2020 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteprocLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This introduces device managed versions of functions used to register remoteproc devices, add support for remoteproc driver specific resource control, enables remoteproc drivers to specify ELF class and machine for coredumps. It integrates pm_runtime in the core for keeping resources active while the remote is booted and holds a wake source while recoverying a remote processor after a firmware crash. It refactors the remoteproc device's allocation path to simplify the logic, fix a few cleanup bugs and to not clone const strings onto the heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a zero-length array is replaced with flexible-array. A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm SM8250 gains support for audio, compute and sensor remoteprocs and the Qualcomm SC7180 modem support is cleaned up and improved. The Qualcomm glink subsystem-restart driver is merged into the main glink driver, the Qualcomm sysmon driver is extended to properly notify remote processors about all other remote processors' state transitions" * tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits) remoteproc: Fix an error code in devm_rproc_alloc() MAINTAINERS: Add myself as reviewer for Ingenic rproc driver remoteproc: ingenic: Added remoteproc driver remoteproc: Add support for runtime PM dt-bindings: Document JZ47xx VPU auxiliary processor remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev() remoteproc: Fix and restore the parenting hierarchy for vdev remoteproc: Fall back to using parent memory pool if no dedicated available remoteproc: Replace zero-length array with flexible-array remoteproc: wcss: add support for rpmsg communication remoteproc: core: Prevent system suspend during remoteproc recovery remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs remoteproc: qcom: pas: Add SM8250 PAS remoteprocs dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region dt-bindings: remoteproc: qcom: Use memory-region to reference memory remoteproc: qcom: pas: Add SC7180 Modem support ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteprocLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This replaces a zero-length array with flexible-array and fixes a typo in a comment in the rpmsg core" * tag 'rpmsg-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: Replace zero-length array with flexible-array rpmsg: fix a comment typo for rpmsg_device_match()
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: "The highlights are: - OSD/MDS latency and caps cache metrics infrastructure for the filesytem (Xiubo Li). Currently available through debugfs and will be periodically sent to the MDS in the future. - support for replica reads (balanced and localized reads) for rbd and the filesystem (myself). The default remains to always read from primary, users can opt-in with the new crush_location and read_from_replica options. Note that reading from replica is safe for general use only since Octopus. - support for RADOS allocation hint flags (myself). Currently used by rbd to propagate the compressible/incompressible hint given with the new compression_hint map option and ready for passing on more advanced hints, e.g. based on fadvise() from the filesystem. - support for efficient cross-quota-realm renames (Luis Henriques) - assorted cap handling improvements and cleanups, particularly untangling some of the locking (Jeff Layton)" * tag 'ceph-for-5.8-rc1' of git://github.com/ceph/ceph-client: (29 commits) rbd: compression_hint option libceph: support for alloc hint flags libceph: read_from_replica option libceph: support for balanced and localized reads libceph: crush_location infrastructure libceph: decode CRUSH device/bucket types and names libceph: add non-asserting rbtree insertion helper ceph: skip checking caps when session reconnecting and releasing reqs ceph: make sure mdsc->mutex is nested in s->s_mutex to fix dead lock ceph: don't return -ESTALE if there's still an open file libceph, rbd: replace zero-length array with flexible-array ceph: allow rename operation under different quota realms ceph: normalize 'delta' parameter usage in check_quota_exceeded ceph: ceph_kick_flushing_caps needs the s_mutex ceph: request expedited service on session's last cap flush ceph: convert mdsc->cap_dirty to a per-session list ceph: reset i_requested_max_size if file write is not wanted ceph: throw a warning if we destroy session with mutex still locked ceph: fix potential race in ceph_check_caps ceph: document what protects i_dirty_item and i_flushing_item ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - An iopen glock locking scheme rework that speeds up deletes of inodes accessed from multiple nodes - Various bug fixes and debugging improvements - Convert gfs2-glocks.txt to ReST * tag 'gfs2-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: fix use-after-free on transaction ail lists gfs2: new slab for transactions gfs2: initialize transaction tr_ailX_lists earlier gfs2: Smarter iopen glock waiting gfs2: Wake up when setting GLF_DEMOTE gfs2: Check inode generation number in delete_work_func gfs2: Move inode generation number check into gfs2_inode_lookup gfs2: Minor gfs2_lookup_by_inum cleanup gfs2: Try harder to delete inodes locally gfs2: Give up the iopen glock on contention gfs2: Turn gl_delete into a delayed work gfs2: Keep track of deleted inode generations in LVBs gfs2: Allow ASPACE glocks to also have an lvb gfs2: instrumentation wrt log_flush stuck gfs2: introduce new gfs2_glock_assert_withdraw gfs2: print mapping->nrpages in glock dump for address space glocks gfs2: Only do glock put in gfs2_create_inode for free inodes gfs2: Allow lock_nolock mount to specify jid=X gfs2: Don't ignore inode write errors during inode_go_sync docs: filesystems: convert gfs2-glocks.txt to ReST
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Vasily Gorbik: - Add support for multi-function devices in pci code. - Enable PF-VF linking for architectures using the pdev->no_vf_scan flag (currently just s390). - Add reipl from NVMe support. - Get rid of critical section cleanup in entry.S. - Refactor PNSO CHSC (perform network subchannel operation) in cio and qeth. - QDIO interrupts and error handling fixes and improvements, more refactoring changes. - Align ioremap() with generic code. - Accept requests without the prefetch bit set in vfio-ccw. - Enable path handling via two new regions in vfio-ccw. - Other small fixes and improvements all over the code. * tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits) vfio-ccw: make vfio_ccw_regops variables declarations static vfio-ccw: Add trace for CRW event vfio-ccw: Wire up the CRW irq and CRW region vfio-ccw: Introduce a new CRW region vfio-ccw: Refactor IRQ handlers vfio-ccw: Introduce a new schib region vfio-ccw: Refactor the unregister of the async regions vfio-ccw: Register a chp_event callback for vfio-ccw vfio-ccw: Introduce new helper functions to free/destroy regions vfio-ccw: document possible errors vfio-ccw: Enable transparent CCW IPL from DASD s390/pci: Log new handle in clp_disable_fh() s390/cio, s390/qeth: cleanup PNSO CHSC s390/qdio: remove q->first_to_kick s390/qdio: fix up qdio_start_irq() kerneldoc s390: remove critical section cleanup from entry.S s390: add machine check SIGP s390/pci: ioremap() align with generic code s390/ap: introduce new ap function ap_get_qdev() Documentation/s390: Update / remove developerWorks web links ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu updates from Joerg Roedel: "A big part of this is a change in how devices get connected to IOMMUs in the core code. It contains the change from the old add_device() / remove_device() to the new probe_device() / release_device() call-backs. As a result functionality that was previously in the IOMMU drivers has been moved to the IOMMU core code, including IOMMU group allocation for each device. The reason for this change was to get more robust allocation of default domains for the iommu groups. A couple of fixes were necessary after this was merged into the IOMMU tree, but there are no known bugs left. The last fix is applied on-top of the merge commit for the topic branches. Other than that change, we have: - Removal of the driver private domain handling in the Intel VT-d driver. This was fragile code and I am glad it is gone now. - More Intel VT-d updates from Lu Baolu: - Nested Shared Virtual Addressing (SVA) support to the Intel VT-d driver - Replacement of the Intel SVM interfaces to the common IOMMU SVA API - SVA Page Request draining support - ARM-SMMU Updates from Will: - Avoid mapping reserved MMIO space on SMMUv3, so that it can be claimed by the PMU driver - Use xarray to manage ASIDs on SMMUv3 - Reword confusing shutdown message - DT compatible string updates - Allow implementations to override the default domain type - A new IOMMU driver for the Allwinner Sun50i platform - Support for ATS gets disabled for untrusted devices (like Thunderbolt devices). This includes a PCI patch, acked by Bjorn. - Some cleanups to the AMD IOMMU driver to make more use of IOMMU core features. - Unification of some printk formats in the Intel and AMD IOMMU drivers and in the IOVA code. - Updates for DT bindings - A number of smaller fixes and cleanups. * tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits) iommu: Check for deferred attach in iommu_group_do_dma_attach() iommu/amd: Remove redundant devid checks iommu/amd: Store dev_data as device iommu private data iommu/amd: Merge private header files iommu/amd: Remove PD_DMA_OPS_MASK iommu/amd: Consolidate domain allocation/freeing iommu/amd: Free page-table in protection_domain_free() iommu/amd: Allocate page-table in protection_domain_init() iommu/amd: Let free_pagetable() not rely on domain->pt_root iommu/amd: Unexport get_dev_data() iommu/vt-d: Fix compile warning iommu/vt-d: Remove real DMA lookup in find_domain iommu/vt-d: Allocate domain info for real DMA sub-devices iommu/vt-d: Only clear real DMA device's context entries iommu: Remove iommu_sva_ops::mm_exit() uacce: Remove mm_exit() op iommu/sun50i: Constify sun50i_iommu_ops iommu/hyper-v: Constify hyperv_ir_domain_ops iommu/vt-d: Use pci_ats_supported() iommu/arm-smmu-v3: Use pci_ats_supported() ... -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm msm updates from Dave Airlie: "This tree has been in next for a couple of weeks, but Rob missed an arm32 build issue, so I was awaiting the tree with a patch reverted. - new gpu support: a405, a640, a650 - dpu: color processing support - mdp5: support for msm8x36 (the thing with a405) - some prep work for per-context pagetables (ie the part that does not depend on in-flight iommu patches) - last but not least, UABI update for submit ioctl to support syncobj (from Bas)" * tag 'drm-next-msm-5.8-2020-06-08' of git://anongit.freedesktop.org/drm/drm: (30 commits) Revert "drm/msm/dpu: add support for clk and bw scaling for display" drm/msm/a6xx: skip HFI set freq if GMU is powered down drm/msm: Update the MMU helper function APIs drm/msm: Refactor address space initialization drm/msm: Attach the IOMMU device during initialization drm/msm/dpu: dpu_setup_dspp_pcc() can be static drm/msm/a6xx: a6xx_hfi_send_start() can be static drm/msm/a4xx: add a405_registers for a405 device drm/msm/a4xx: add adreno a405 support drm/msm/a6xx: update a6xx_hw_init for A640 and A650 drm/msm/a6xx: enable GMU log drm/msm/a6xx: update pdc/rscc GMU registers for A640/A650 drm/msm/a6xx: A640/A650 GMU firmware path drm/msm/a6xx: HFI v2 for A640 and A650 drm/msm/a6xx: add A640/A650 to gpulist drm/msm/a6xx: use msm_gem for GMU memory objects drm/msm: add internal MSM_BO_MAP_PRIV flag drm/msm: add msm_gem_get_and_pin_iova_range drm/msm: Check for powered down HW in the devfreq callbacks drm/msm/dpu: update bandwidth threshold check ... -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "These are the fixes from last week for the stuff merged in the merge window. It got a bunch of nouveau fixes for HDA audio on some new GPUs, some i915 and some amdpgu fixes. i915: - gvt: Fix one clang warning on debug only function - Use ARRAY_SIZE for coccicheck warning - Use after free fix for display global state. - Whitelisting context-local timestamp on Gen9 and two scheduler fixes with deps (Cc: stable) - Removal of write flag from sysfs files where ineffective nouveau: - HDMI/DP audio HDA fixes - display hang fix for Volta/Turing - GK20A regression fix. amdgpu: - Prevent hwmon accesses while GPU is in reset - CTF interrupt fix - Backlight fix for renoir - Fix for display sync groups - Display bandwidth validation workaround" * tag 'drm-next-2020-06-08' of git://anongit.freedesktop.org/drm/drm: (28 commits) drm/nouveau/kms/nv50-: clear SW state of disabled windows harder drm/nouveau: gr/gk20a: Use firmware version 0 drm/nouveau/disp/gm200-: detect and potentially disable HDA support on some SORs drm/nouveau/disp/gp100: split SOR implementation from gm200 drm/nouveau/disp: modify OR allocation policy to account for HDA requirements drm/nouveau/disp: split part of OR allocation logic into a function drm/nouveau/disp: provide hint to OR allocation about HDA requirements drm/amd/display: Revalidate bandwidth before commiting DC updates drm/amdgpu/display: use blanked rather than plane state for sync groups drm/i915/params: fix i915.fake_lmem_start module param sysfs permissions drm/i915/params: don't expose inject_probe_failure in debugfs drm/i915: Whitelist context-local timestamp in the gen9 cmdparser drm/i915: Fix global state use-after-frees with a refcount drm/i915: Check for awaits on still currently executing requests drm/i915/gt: Do not schedule normal requests immediately along virtual drm/i915: Reorder await_execution before await_request drm/nouveau/kms/gt215-: fix race with audio driver runpm drm/nouveau/disp/gm200-: fix NV_PDISP_SOR_HDMI2_CTRL(n) selection Revert "drm/amd/display: disable dcn20 abm feature for bring up" drm/amd/powerplay: ack the SMUToHost interrupt on receive V2 ... -
Linus Torvalds authored
Merge still more updates from Andrew Morton: "Various trees. Mainly those parts of MM whose linux-next dependents are now merged. I'm still sitting on ~160 patches which await merges from -next. Subsystems affected by this patch series: mm/proc, ipc, dynamic-debug, panic, lib, sysctl, mm/gup, mm/pagemap" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (52 commits) doc: cgroup: update note about conditions when oom killer is invoked module: move the set_fs hack for flush_icache_range to m68k nommu: use flush_icache_user_range in brk and mmap binfmt_flat: use flush_icache_user_range exec: use flush_icache_user_range in read_code exec: only build read_code when needed m68k: implement flush_icache_user_range arm: rename flush_cache_user_range to flush_icache_user_range xtensa: implement flush_icache_user_range sh: implement flush_icache_user_range asm-generic: add a flush_icache_user_range stub mm: rename flush_icache_user_range to flush_icache_user_page arm,sparc,unicore32: remove flush_icache_user_range riscv: use asm-generic/cacheflush.h powerpc: use asm-generic/cacheflush.h openrisc: use asm-generic/cacheflush.h m68knommu: use asm-generic/cacheflush.h microblaze: use asm-generic/cacheflush.h ia64: use asm-generic/cacheflush.h hexagon: use asm-generic/cacheflush.h ...
-
Konstantin Khlebnikov authored
Starting from v4.19 commit 29ef680a ("memcg, oom: move out_of_memory back to the charge path") cgroup oom killer is no longer invoked only from page faults. Now it implements the same semantics as global OOM killer: allocation context invokes OOM killer and keeps retrying until success. [akpm@linux-foundation.org: fixes per Randy] Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: http://lkml.kernel.org/r/158894738928.208854.5244393925922074518.stgit@buzzSigned-off-by:
-
Christoph Hellwig authored
flush_icache_range generally operates on kernel addresses, but for some reason m68k needed a set_fs override. Move that into the m68k code insted of keeping it in the module loader. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Jessica Yu <jeyu@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Link: http://lkml.kernel.org/r/20200515143646.3857579-30-hch@lst.deSigned-off-by:
-
