- 15 Feb, 2019 20 commits
-
-
Arnd Bergmann authored
Merge tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Second Round of Renesas ARM64 Based SoC DT Updates for v5.1 * R-Car Gen3 SoC based Salvator-X, Salvator-XS and ULCB boards - Enable HS400 support for eMMC * R-Car E3 (r7a77990) SoC - Add OPPs table for cpu devices * RZ/G2E (r8a774c0) SoC - Describe TMU, CMT, SDHI devices in DT - Describe pincontrol support for SCIF2 device in DT - Add OPPs table for cpu devices * RZ/G2E (r8a774c0) based EK874 board and CAT875 sub-board, and CAT874 board - Initial support * tag 'renesas-arm64-dt2-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: cat875: Enable PCIe support arm64: dts: renesas: r8a774c0-cat874: Add pciec0 support arm64: dts: renesas: r8a774c0: Add TMU device nodes arm64: dts: renesas: r8a774c0: Add CMT device nodes arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices arm64: dts: renesas: enable HS400 on R-Car Gen3 arm64: dts: renesas: cat875: Add ethernet support arm64: dts: renesas: r8a774c0-cat874: Add uSD support arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2 arm64: dts: renesas: Add Si-Linux EK874 board support arm64: dts: renesas: Add Si-Linux CAT874 board support Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner DT changes for 5.1, take 2 Our usual bunch of DT changes for the Allwinner arm SoCs: - LCD support for the Q8 A13 tablets - GMAC support for the A80 - PMIC power supplies for the A83t * tag 'sunxi-dt-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a83t: Enable PMIC power supplies on various boards ARM: dts: sun9i: cubieboard4: Enable GMAC ARM: dts: sun9i: a80-optimus: Enable GMAC ARM: dts: sun9i: Add A80 GMAC RGMII pinmux setting ARM: dts: sun9i: Add A80 GMAC gigabit ethernet controller node ARM: dts: sun9i: Add GMAC clock node ARM: dts: sun9i: cubieboard4: Add GPIO pin-bank regulator supplies ARM: dts: sun9i: a80-optimus: Add GPIO pin-bank regulator supplies ARM: dts: sun9i: a80-optimus: Add node for AXP809's unused dc1sw regulator ARM: dts: sun5i: q8-tablet: Use bananapi,s070wv20-ct16 panel compatible ARM: dts: sun5i: q8-tablet: Add LCD Panel power supply ARM: dts: sun5i: q8-tablet: Add LCD Panel enable GPIO ARM: dts: sun5i: q8-tablet: Move panel properties to correct node level ARM: dts: sun5i: Add backlight GPIO for reference design tablet Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner arm64 DT changes for 5.1, take 2 Our usual round of DT changes for the arm64 Allwinner SoCs: - Enabling of the various power supplies on most a64 boards - H6 SRAM controller support - A64 CSI support * tag 'sunxi-dt64-for-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards arm64: dts: allwinner: a64: teres-i: enable power supplies arm64: dts: allwinner: h6: Add support for the SRAM C1 section dt-bindings: sram: sunxi: Add compatible for the H6 SRAM C1 arm64: dts: allwinner: a64: Add A64 CSI controller arm64: dts: allwinner: h6: Move GIC device node fix base address ordering Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Allwinner H3 and H5 changes for 5.1 Our usual round of DT changes shared between arm and arm64. We have a bunch of changes for board, improving the eMMC support on the H5 variant of the All-H3-CC, enabling HDMI and reworking the CSI driver. * tag 'sunxi-h3-h5-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: libretech-all-h3-cc: Mark eMMC HS-DDR 3.3V capable ARM: dts: sunxi: h3/h5: Drop A31 fallback compatible for CSI controller ARM: dts: sun8i-h3: nanopi-m1-plus: enable HDMI Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.1 - Add SMMU node for Stratix10 - Add vendor prefix fo Novtech - Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA - Add missing reset properties for all IP on Cyclone5 and Arria10 * tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: update more missing reset properties ARM: dts: socfpga: update missing reset property peripherals ARM: dts: Add support for 96Boards Chameleon96 board dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix arm64: dts: stratix10: Add Stratix10 SMMU support Signed-off-by:
-
git://github.com/hisilicon/linux-hisiArnd Bergmann authored
ARM64: DT: Hisilicon SoCs DT updates for 5.1 * Hi6220 SoC and related boards: - Add DMA entries to enable DMA for Bluetooth transfers - Add power-on delay to make wifi stable - Revert HS200 mode to avoid eMMC controller resets and block read failures * Hi3660 SoC and related boards: - Fix SD card detection via setting cd-gpios correctly * Hi3798 SoC and related boards: - Fix malformed SPDX license identifier * tag 'hisi-arm64-dt-for-5.1v2' of git://github.com/hisilicon/linux-hisi: arm64: dts: hikey: Revert "Enable HS200 mode on eMMC" arm64: dts: hikey: Give wifi some time after power-on arm64: dts: hi3798cv200: fix malformed SPDX license identifier arm64: dts: hikey960: fix SDcard detection arm64: dts: hikey: Add DMA entries for Bluetooth UART Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm Device Tree Changes for v5.1 * Fixup GIC IRQ flags and GSBI state on MSM8660 * Add USB OTG, gpio ranges, and Wifi support on MSM8974 Hammerhead * Remove skeleton.dtsi on IPQ4019 * tag 'qcom-dts-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: ipq4019: Remove skeleton.dtsi ARM: dts: qcom: msm8974-hammerhead: add USB OTG support ARM: dts: qcom: msm8974: add gpio-ranges ARM: dts: qcom: msm8974-hammerhead: add WiFi support ARM: dts: msm8660: Fix up GIC IRQ flags ARM: dts: msm8660: Mark two GSBI blocks "disabled" Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm ARM64 Updates for v5.1 * Add MSM8998 RPMCC, I2C, and USB related nodes * Add MSM8996 rpmpd node * Fix typo in MSM8996 pin definitions * Disable MSM8996 VFE smmu to fix security violation * Add I2C, SPI, rpmcc, uart, and WCN3990 wlan nodes on QCS404 * Enable SDCC1 HS400 support on QCS404 * Add a multitude of nodes on SDM845: SD, UFS, USB, LPASS, SCM, QSPI, PDC, DPU, videocc, GPU, RPMh bus interconnect, WCN3990 WLAN * Add gpio ranges to SDM845 TLMM * Fix regulator load on sdcard on MSM8998-mtp board * tag 'qcom-arm64-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (41 commits) arm64: dts: sdm845: Add interconnect provider DT nodes arm64: dts: qcom: msm8996: Disabled VFE SMMU arm64: dts: qcom: qcs404: Add rpmcc node arm64: dts: qcom: msm8998: Add rpmcc node arm64: dts: qcom: msm8998: Add USB-related nodes arm64: dts: qcom: qcs404: Add QUP I2C and SPI nodes arm64: dts: qcom: qcs404: Define remaining UARTs arm64: dts: qcom: qcs404: Specify pinctrl state for UART arm64: dts: qcom: sdm845: Fix lpasscc reg arm64: dts: qcom: sdm845: Remove the duplicate header inclusion arm64: dts: qcom: sdm845: Add reserve-memory nodes arm64: dts: qcom: sdm845: Add gpio-ranges to TLMM node arm64: dts: qcom: sdm845: Extend ranges and describe DMA space arm64: dts: qcom: sdm845: Increase address and size cells for soc arm64: dts: sdm845: Add rpmh powercontroller node arm64: dts: msm8996: Add rpmpd device node arm64: dts: sdm845: Add WCN3990 WLAN module device node arm64: dts: qcom: sdm845: Add PDC Global reset driver node arm64: dts: qcom: sdm845: Add SCM DT node arm64: dts: qcom: sdm845: Fix pcs_misc region address for UNI PHY ... Signed-off-by:
-
https://github.com/vzapolskiy/linux-lpc32xxArnd Bergmann authored
ARM: lpc32xx: devicetree updates for v5.1 Here are the changes for ARM NXP LPC32xx and ARM NXP LPC18xx/LPC43xx devicetree files: * added dts file for MYIR Tech MYD-LPC4357 development board, * two missing properties are added to LPC32xx keypad controller device tree node, this fixes a long-standing problem with its initialization, * LPC32xx PL11x LCD controller device node got corrected properties, which allows to use it with a new PL11x DRM driver, * output voltage level on one of Phytec phyCORE-LPC3250 fixed regulators is corrected, the fix is needed to remove duplicating platform data, * Phytec phyCORE-LPC3250 board gets a description of a kit LCD panel, this completes setup of CLCD device tree node for the board, * added unit addresses to memory device nodes on EA and Phytec boards, * fixes of ordinary warnings in dts formatting like leading zeroes, unused address and size cell properties and so on. * tag 'lpc32xx-dt-for-5.1' of https://github.com/vzapolskiy/linux-lpc32xx: ARM: dts: lpc32xx: ea3250: beautify gpio keys children nodes ARM: dts: lpc32xx: ea3250: add unit address to memory device node ARM: dts: lpc32xx: phy3250: add unit address to memory device node ARM: dts: lpc32xx: phy3250: setup LCD controller to panel interface ARM: dts: lpc32xx: phy3250: remove regulators umbrella device node ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant ARM: dts: lpc32xx: reparent keypad controller to SIC1 ARM: dts: lpc32xx: add required clocks property to keypad device node ARM: dts: Add DT for MYIR Tech MYD-LPC4357 Development Board ARM: dts: lpc32xx: Remove leading 0x and 0s from bindings notation ARM: dts: lpc435x: remove address and size cells from gpio-keys-polled nodes Signed-off-by:
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM64-based SoCs Device Tree updates for 5.1, please pull the following: - Stefan adds support for the Raspberry Pi 3 A+ by using the same mechanism of creating a symbolic reference to the ARM 32-bit DTS file * tag 'arm-soc/for-5.1/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Add reference to RPi 3 A+ ARM: dts: add Raspberry Pi 3 A+ Signed-off-by:
-
https://github.com/Broadcom/stblinuxArnd Bergmann authored
This pull request contains Broadcom ARM-based SoCs Device Tree updates for 5.1, please pull the following: - Dan relicenses the Luxul DTS files to GPL 2.0+/MIT - Hao adds support for the Phicomm K3 which is a BCM4709 SoC with dual BCM4366 radio - Stefan adds support for the Raspberry Pi A+: binding and DTS files. He also provides a bunch of DTC warning fixes for the different RPi DTS(i) files and adds support for missing GPIO lines on RPi 2/3 * tag 'arm-soc/for-5.1/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2835-rpi-zero-w: Drop unnecessary pinctrl ARM: dts: bcm283x: Add missing GPIO line names ARM: dts: bcm2837-rpi-3-b-plus: Clarify label for STATUS_LED ARM: dts: bcm2837-rpi-3-b: Use consistent label for HDMI hotplug ARM: dts: bcm2835: Fix labels for GPIO 0,1 ARM: dts: bcm2835-rpi: Drop unnecessary #address-cells/#size-cells ARM: dts: bcm283x: Fix DTC warning for memory node ARM: dts: add Raspberry Pi 3 A+ dt-bindings: bcm: Add Raspberry Pi 3 A+ ARM: dts: BCM5301X: Add basic DT for Phicomm K3 ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ / MIT Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linuxArnd Bergmann authored
Samsung DTS ARM changes for v5.1 1. Extend support for Aries family of mobile devices (e.g. Samsung Galaxy S) based on S5Pv210 SoC: DRM Rotator, FIMD, PWM vibrator, power off, touchscreen, Broadcom BCM4329 Bluetooth and cpufreq. 2. Remove hardcoded bootargs on Galaxy S family (proper support in U-Boot). 3. Fix minor DTC warnings. 4. Fix Exynos4412 Odroid X2/U3 conflicting eMMC GPIO settings and regulator properties. 5. Fix the eMMC RTSN pin breaking proper reboot on X2. * tag 'samsung-dt-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3 ARM: dts: exynos: Fix eMMC regulator properties on Odroid U3 boards ARM: dts: exynos: Fix conflicting fixed-regulator GPIO flags and properties ARM: dts: s3c2416: Fix xti node's missing reg property warning ARM: dts: s5pv210: Fix onenand's unit address format warning ARM: dts: s5pv210: Add DMC nodes ARM: dts: s5pv210: Add support for more devices present on Aries ARM: dts: s5pv210: Add reserved memory for MFC on Aries ARM: dts: s5pv210: Remove hardcoded bootargs on Galaxy S and Fascinate 4G ARM: dts: s5pv210: Use correct fimd variant ARM: dts: s5pv210: Add node for exynos-rotator Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.1, round 1 Highlights: ---------- MPU part: -Enable Digital Thermal Sensor (dts) on stm32mp157c-ed1 (and so ev1). MCU part: -Add SPI support on stm32f429 SOC (4 SPIs instances). * tag 'stm32-dt-for-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Enable thermal sensor support on STM32MP157c-ed1 ARM: dts: stm32: add SPI support on STM32F429 SoC Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New boards are the Rock Pi 4, NanoPC-T4 and NanoPi-M4, with the last two being part of a family and sharing bigger parts of the devicetree. rk3328 got sound-related upgrades and a wider patch drops mmc display-wp fields from nodes which shouldn't use it. * tag 'v5.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: clean up the abuse of disable-wp arm64: dts: rockchip: 'Fix' nanopi4 uSD card detect arm64: dts: rockchip: Add NanoPC-T4 IR receiver arm64: dts: rockchip: Refine nanopi4 differences arm64: dts: rockchip: Add DT for NanoPi M4 arm64: dts: rockchip: add ROCK Pi 4 DTS support arm64: dts: rockchip: Add devicetree for NanoPC-T4 arm64: dts: rockchip: enable analog audio node for rock64 arm64: dts: rockchip: move rk3328 #sound-dai-cells to the soc dtsi arm64: dts: rockchip: add rk3328 ACODEC node Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt New board the Elgin-R1 based on the rv1108 soc and a number of small improvements for rv1108 as well. RK3066 got support for the core display components and the Edison tablet got its touchscreen added. Apart from that a wider fix to drop display-wp usage from places where it shouldn't be used, a pin fix for Edison and a cleanup to prevent rk3036 board from defining sound-dai-cells for core components in each board separately. * tag 'v5.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: clean up the abuse of disable-wp ARM: dts: rv1108: Add support for rv1108-elgin-r1 board dt-bindings: Add vendor prefix for elgin ARM: dts: rockchip: rv1108: Add spim0 and spim1 pinctrl groups ARM: dts: rockchip: Add missing dma-names SPI support for rv1108 ARM: dts: rockchip: add rk3066 vop display nodes ARM: dts: rockchip: add focaltech touchscreen to rk3188-bqedison2qc ARM: dts: rockchip: fix cif1_pdn pin on rk3188-bqedison2qc ARM: dts: rockchip: add HCLK_HDMI to rk3066 vio power-domain ARM: dts: rockchip: move rk3036 i2s sound-dail-cells into soc dtsi Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'am654-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt AM65x DT changes for v5.1. Includes: - EMMC support for am654-evm board * tag 'am654-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-am654-base-board: Add eMMC Support arm64: dts: ti: k3-am654: Add Support for eMMC host controller Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'davinci-for-v5.1/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt DaVinci device-tree updates for v5.1 contains a patch to enable analog mic input on da850 LCDK board. * tag 'davinci-for-v5.1/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: dts: da850-lcdk: Enable the analog mic input Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts updates for omap variants for v5.1 merge window This series contains board specific dts updates and few minor clean-up changes: - add stdout-path for am335x-chiliboard - add wlcore wakeirq for omap3-evm, pandaboard and omap4-droid4 - remove unnecessary address-cells and io-cells for am33xx - replace deprecated linux,wakeup with wakeup-source property - use spdx license for am335x-shc - configure ethernet pins for omap4-sdp * tag 'omap-for-v5.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-sdp: Make ethernet working even if booted with latest u-boot ARM: dts: am335x-shc.dts: Switch to SPDX identifier ARM: dts: am437x: replace linux,wakeup with wakeup-source property ARM: dts: am33xx: Remove unnecessary properties ARM: dts: omap4-droid4: Configure wlcore wakeirq ARM: dts: Configure wlcore wakeirq for pandaboard ARM: dts: Add wlcore wakeirq for omap3-evm ARM: dts: am335x-chiliboard: Add stdout-path property Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.1/dt-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt dts updates for ti81xx for v5.1 merge window Two changes to add support for McGill University's IceBoard telescope ARM + FPGA instrumentation board. This board is used for several telescopes around the world, see the related device tree commit for some interesting links for more information. Note that these changes are based on the related ti81xx soc changes. * tag 'omap-for-v5.1/dt-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874 ARM: dts: ti81xx: Add dts boilerplate for all GPIO and SPI peripherals Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.1/soc-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt SoC updates for ti81xx for v5.1 merge window Two changes to add legacy hwmod data for gpio and spi peripherals on ti81xx. We have not yet updated ti81xx to probe devices with ti-sysc interconnect target module driver, so these changes are still needed to make devices usable for the related device tree changes. * tag 'omap-for-v5.1/soc-ti-81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: ti81xx: Add hwmod boilerplate for all GPIO and SPI peripherals ARM: ti81xx: Move I2C entries in omap_hwmod_81xx to maintain grouping Signed-off-by:
-
- 08 Feb, 2019 7 commits
-
-
Biju Das authored
This patch enables PCIEC0 PCI express controller on the sub board. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Biju Das authored
Silicon Linux CAT 874 board has 2GB DDR memory. Update the dma-ranges mapping for pciec0 node. Also declare pcie bus clock, since it is generated on the CAT874 main board. Signed-off-by:
-
Biju Das authored
This patch adds TMU{0|1|2|3|4} device nodes for r8a774c0 SoC. Signed-off-by: -
Biju Das authored
This patch adds CMT{0|1|2|3} device nodes for r8a774c0 SoC. Signed-off-by: -
Fabrizio Castro authored
This patch defines OOP tables for all CPUs, similarly to what done by Takeshi Kihara and Yoshihiro Kaneko for the R8A77990. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by:
-
Takeshi Kihara authored
This patch define OOP tables for all CPUs. This allows CPUFreq to function. Signed-off-by:
Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Tested-by:
-
Niklas Söderlund authored
Successfully tested on H3 ES2.0 and M3-N ES1.0. Transfer rates where >160MB/s for H3 and >200MB/s for M3-N. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by:
-
- 07 Feb, 2019 9 commits
-
-
Chen-Yu Tsai authored
On the Bananapi M3 and Cubietruck Plus, the DC input jacks are wired to the ACIN pins, which is represented by the AC power supply. Both boards have connectors for LiPo batteries, which are represented by the battery power supply. The H8 Homlet is a set-top box design. The DC input jack is wired to the ACIN pins, but there are no battery connectors. Enable these power supplies in the device tree. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com>
-
Chen-Yu Tsai authored
The Cubieboard4 has a Realtek RTL8211E ethernet PHY which uses RGMII to talk to the MAC. The PHY is powered by 2 regulators: cldo1 for the PHY's core logic and gpio1-ldo for I/O. The latter also powers the SoC side pins. As there is no binding to model a second regulator supply for the PHY, it is omitted. It is however properly modeled for the PIO. Signed-off-by:
-
Chen-Yu Tsai authored
The A80 Optimus has a Realtek RTL8211E ethernet PHY which uses RGMII to talk to the MAC. The PHY is powered by 2 regulators: cldo1 for the PHY's core logic and gpio1-ldo for I/O. The latter also powers the SoC side pins. As there is no binding to model a second regulator supply for the PHY, it is omitted. It is however properly modeled for the PIO. Signed-off-by:
-
Chen-Yu Tsai authored
The GMAC (gigabit ethernet controller) supports RGMII to connect to the ethernet PHY, for gigabit network speeds. Signed-off-by:
-
Chen-Yu Tsai authored
The A80 has the same GMAC found on the A31 SoC. Add a device node, and an alias for it. Signed-off-by:
-
Chen-Yu Tsai authored
The A80 has the same DWMAC hardware as on earlier Allwinner SoCs. The accompanying GMAC clock register has been moved into the "System Control" area. Add a clock node for it. Signed-off-by:
-
Chen-Yu Tsai authored
The Cubieboard 4 has the PMIC providing voltage to all the pin-bank supply rails from its various regulator outputs. All pin-banks that have supply rails are accounted for. PN pin-bank does not have a supply rail. Also remove any "regulator-always-on" properties from regulators that were only marked to provide pin-bank power. Signed-off-by:
-
Chen-Yu Tsai authored
The A80 Optimus has the PMIC providing voltage to all the pin-bank supply rails from its various regulator outputs. All pin-banks that have supply rails are accounted for. PN pin-bank does not have a supply rail. Also remove any "regulator-always-on" properties from regulators that were only marked to provide pin-bank power. Signed-off-by:
-
Chen-Yu Tsai authored
The DC1SW output from the AXP809 is unused. Unused regulators should still be listed so as to be considered to be fully constrained. Fixes: aa4a27bc ("ARM: dts: sun9i: a80-optimus: Add AXP809 PMIC device node and regulators") Signed-off-by:
-
- 06 Feb, 2019 2 commits
-
-
Chen-Yu Tsai authored
The Libre Computer ALL-H3-CC H5 is one of the few boards that can have its eMMC run at HS-DDR speed mode. Mark it as such. Signed-off-by:
-
Chen-Yu Tsai authored
On these A64 devices, the DC input jacks are wired to the ACIN pins of the PMIC, which is represented by the AC power supply. With the exception of the Nanopi A64, all devices include LiPo batteries or have connectors for them, which are represented by the battery power supply. Enable these power supplies in the device tree. Signed-off-by:
-
- 04 Feb, 2019 2 commits
-
-
Alistair Strachan authored
This reverts commit abd7d097. This change was already partially reverted by John Stultz in commit 9c6d26df ("arm64: dts: hikey: Fix eMMC corruption regression"). This change appears to cause controller resets and block read failures which prevents successful booting on some hikey boards. Cc: Ryan Grachek <ryan@edited.us> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: stable <stable@vger.kernel.org> #4.17+ Signed-off-by:
Alistair Strachan <astrachan@google.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Wei Xu <xuwei5@hisilicon.com>
-
Jan Kiszka authored
Somewhere along recent changes to power control of the wl1835, power-on became very unreliable on the hikey, failing like this: wl1271_sdio: probe of mmc2:0001:1 failed with error -16 wl1271_sdio: probe of mmc2:0001:2 failed with error -16 After playing with some dt parameters and comparing to other users of this chip, it turned out we need some power-on delay to make things stable again. In contrast to those other users which define 200 ms, the hikey would already be happy with 1 ms. Still, we use the safer 10 ms, like on the Ultra96. Fixes: ea452678 ("arm64: dts: hikey: Fix WiFi support") Cc: <stable@vger.kernel.org> #4.12+ Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
