- 06 May, 2011 15 commits
-
-
Stephen M. Cameron authored
Just go straight to the soft-reset method instead. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
on driver load, if reset_devices is set, and the hard reset attempts fail, try to bring up the controller to the point that a command can be sent, and send it a soft reset command, then after the reset undo whatever driver initialization was done to get it to the point to take a command, and re-do it after the reset. This is to get kdump to work on all the "non-resettable" controllers (except 64xx controllers which can't be reset due to the potentially shared cache module.) Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
The bit-2-doorbell reset method seemed to cause (survivable) NMIs on some systems and (unsurvivable) IOCK NMIs on some G7 servers. Firmware guys implemented a new doorbell method to alleviate these problems triggered by bit 5 of the doorbell register. We want to use it if it's available. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
Just to reduce the messages about timeouts that appear. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
When waiting for the board to become "not ready" don't print a message saying "waiting for board to become ready" (possibly followed by a message saying "failed waiting for board to become not ready". Instead, it should be "waiting for board to reset" and "failed waiting for board to reset." Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> " Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
Detect failure of controller reset by noticing if the 32 bytes of "driver version" we store on the hardware in the config table fail to get zeroed out. Previously we noticed if the controller did not transition to "simple mode", but this did not detect reset failure if the controller was already in simple mode prior to the reset attempt (e.g. due to module parameter hpsa_simple_mode=1). Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Stephen M. Cameron authored
This is to ensure the board interrupts are really off when these functions return. Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Kees Cook authored
After the anticipatory scheduler was dropped, there was no need to special-case the request_module string. As such, drop the redundant sprintf and stack variable. Signed-off-by: Kees Cook <kees.cook@canonical.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
- 05 May, 2011 1 commit
-
-
Tao Ma authored
unplug is replaced with blk_run_queue now in blk_execute_rq_nowait, so change the comment accordingly. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
- 21 Apr, 2011 3 commits
-
-
Tejun Heo authored
Disk event code automatically blocks events on excl write. This is primarily to avoid issuing polling commands while burning is in progress. This behavior doesn't fit other types of devices with removeable media where polling commands don't have adverse side effects and door locking usually doesn't exist. This patch introduces new genhd flag which controls the auto-blocking behavior and uses it to enable auto-blocking only on optical devices. Note for stable: 2.6.38 and later only Cc: stable@kernel.org Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Tejun Heo authored
__blkdev_get() doesn't rescan partitions if disk->fops->open() fails, which leads to ghost partition devices lingering after medimum removal is known to both the kernel and userland. The behavior also creates a subtle inconsistency where O_NONBLOCK open, which doesn't fail even if there's no medium, clears the ghots partitions, which is exploited to work around the problem from userland. Fix it by updating __blkdev_get() to issue partition rescan after -ENOMEDIA too. This was reported in the following bz. https://bugzilla.kernel.org/show_bug.cgi?id=13029 Note for stable: 2.6.38 and later only Cc: stable@kernel.org Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Zeuthen <zeuthen@gmail.com> Reported-by: Martin Pitt <martin.pitt@ubuntu.com> Reported-by: Kay Sievers <kay.sievers@vrfy.org> Tested-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Tejun Heo authored
cdrom_open() called check_disk_change() after the rest of open path succeeded which leads to the following bizarre behavior. * After media change, if the device opened without O_NONBLOCK, open_for_data() naturally fails with -ENOMEDIA and check_disk_change() is never called. The media is known to be gone and the open failure makes it obvious to the userland but device invalidation never happens. * But if the device is opened with O_NONBLOCK, all the checks are bypassed and cdrom_open() doesn't notice that the media is not there and check_disk_change() is called and invalidation happens. There's nothing to be gained by avoiding calling check_disk_change() on open failure. Common cases end up calling check_disk_change() anyway. All we get is inconsistent behavior. Fix it by moving check_disk_change() invocation to the top of cdrom_open() so that it always gets called regardless of how the rest of open proceeds. Note for stable: 2.6.38 and later only Cc: stable@kernel.org Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Amit Shah <amit.shah@redhat.com> Tested-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
- 19 Apr, 2011 1 commit
-
-
Linus Torvalds authored
-
- 18 Apr, 2011 20 commits
-
-
git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds authored
* 'for-39-rc4' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: timer: fix missing return value msm: Remove extraneous ffa device check
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xen-kbdfront - fix mouse getting stuck after save/restore Input: estimate number of events per packet Input: evdev - indicate buffer overrun with SYN_DROPPED Input: document event types and codes and their intended use Input: add KEY_IMAGES specifically for AL Image Browser Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe() Input: h3600_ts - fix error handling at connect Input: twl4030_keypad - avoid potential NULL-pointer dereference
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: add blk_run_queue_async block: blk_delay_queue() should use kblockd workqueue md: fix up raid1/raid10 unplugging. md: incorporate new plugging into raid5. md: provide generic support for handling unplug callbacks. md - remove old plugging code. md/dm - remove remains of plug_fn callback. md: use new plugging interface for RAID IO. block: drop queue lock before calling __blk_run_queue() for kblockd punt Revert "block: add callback function for unplug notification" block: Enhance new plugging support to support general callbacks
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/powermac: Build fix with SMP and CPU hotplug powerpc/perf_event: Skip updating kernel counters if register value shrinks powerpc: Don't write protect kernel text with CONFIG_DYNAMIC_FTRACE enabled powerpc: Fix oops if scan_dispatch_log is called too early powerpc/pseries: Use a kmem cache for DTL buffers powerpc/kexec: Fix regression causing compile failure on UP powerpc/85xx: disable Suspend support if SMP enabled powerpc/e500mc: Remove CPU_FTR_MAYBE_CAN_NAP/CPU_FTR_MAYBE_CAN_DOZE powerpc/book3e: Fix CPU feature handling on 64-bit e5500 powerpc: Check device status before adding serial device powerpc/85xx: Don't add disabled PCIe devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (24 commits) Btrfs: fix free space cache leak Btrfs: avoid taking the chunk_mutex in do_chunk_alloc Btrfs end_bio_extent_readpage should look for locked bits Btrfs: don't force chunk allocation in find_free_extent Btrfs: Check validity before setting an acl Btrfs: Fix incorrect inode nlink in btrfs_link() Btrfs: Check if btrfs_next_leaf() returns error in btrfs_real_readdir() Btrfs: Check if btrfs_next_leaf() returns error in btrfs_listxattr() Btrfs: make uncache_state unconditional btrfs: using cached extent_state in set/unlock combinations Btrfs: avoid taking the trans_mutex in btrfs_end_transaction Btrfs: fix subvolume mount by name problem when default mount subvolume is set fix user annotation in ioctl.c Btrfs: check for duplicate iov_base's when doing dio reads btrfs: properly handle overlapping areas in memmove_extent_buffer Btrfs: fix memory leaks in btrfs_new_inode() Btrfs: check for duplicate iov_base's when doing dio reads Btrfs: reuse the extent_map we found when calling btrfs_get_extent Btrfs: do not use async submit for small DIO io's Btrfs: don't split dio bios if we don't have to ...
-
Linus Torvalds authored
Rather than pass in some random truncated offset to the pid-related functions, check that the offset is in range up-front. This is just cleanup, the previous commit fixed the real problem. Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
next_pidmap() just quietly accepted whatever 'last' pid that was passed in, which is not all that safe when one of the users is /proc. Admittedly the proc code should do some sanity checking on the range (and that will be the next commit), but that doesn't mean that the helper functions should just do that pidmap pointer arithmetic without checking the range of its arguments. So clamp 'last' to PID_MAX_LIMIT. The fact that we then do "last+1" doesn't really matter, the for-loop does check against the end of the pidmap array properly (it's only the actual pointer arithmetic overflow case we need to worry about, and going one bit beyond isn't going to overflow). [ Use PID_MAX_LIMIT rather than pid_max as per Eric Biederman ] Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com> Analyzed-by: Robert Święcki <robert@swiecki.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Igor Mammedov authored
Mouse gets "stuck" after restore of PV guest but buttons are in working condition. If driver has been configured for ABS coordinates at start it will get XENKBD_TYPE_POS events and then suddenly after restore it'll start getting XENKBD_TYPE_MOTION events, that will be dropped later and they won't get into user-space. Regression was introduced by hunk 5 and 6 of 5ea5254a ("Input: xen-kbdfront - advertise either absolute or relative coordinates"). Driver on restore should ask xen for request-abs-pointer again if it is available. So restore parts that did it before 5ea5254a. Acked-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Igor Mammedov <imammedo@redhat.com> [v1: Expanded the commit description] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Jeff Brown authored
Calculate a default based on the number of ABS axes, REL axes, and MT slots for the device during input device registration. Signed-off-by: Jeff Brown <jeffbrown@android.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Chris Mason authored
The free space caching code was recently reworked to cache all the pages it needed instead of using find_get_page everywhere. One loop was missed though, so it ended up leaking pages. This fixes it to use our page array instead of find_get_page. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Christoph Hellwig authored
Instead of overloading __blk_run_queue to force an offload to kblockd add a new blk_run_queue_async helper to do it explicitly. I've kept the blk_queue_stopped check for now, but I suspect it's not needed as the check we do when the workqueue items runs should be enough. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Jens Axboe authored
Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
NeilBrown authored
We just need to make sure that an unplug event wakes up the md thread, which is exactly what mddev_check_plugged does. Also remove some plug-related code that is no longer needed. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
In raid5 plugging is used for 2 things: 1/ collecting writes that require a bitmap update 2/ collecting writes in the hope that we can create full stripes - or at least more-full. We now release these different sets of stripes when plug_cnt is zero. Also in make_request, we call mddev_check_plug to hopefully increase plug_cnt, and wake up the thread at the end if plugging wasn't achieved for some reason. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
When an md device adds a request to a queue, it can call mddev_check_plugged. If this succeeds then we know that the md thread will be woken up shortly, and ->plug_cnt will be non-zero until then, so some processing can be delayed. If it fails, then no unplug callback is expected and the make_request function needs to do whatever is required to make the request happen. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
md has some plugging infrastructure for RAID5 to use because the normal plugging infrastructure required a 'request_queue', and when called from dm, RAID5 doesn't have one of those available. This relied on the ->unplug_fn callback which doesn't exist any more. So remove all of that code, both in md and raid5. Subsequent patches with restore the plugging functionality. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
Now that unplugging is done differently, the unplug_fn callback is never called, so it can be completely discarded. Signed-off-by: NeilBrown <neilb@suse.de>
-
NeilBrown authored
md/raid submits a lot of IO from the various raid threads. So adding start/finish plug calls to those so that some plugging happens. Signed-off-by: NeilBrown <neilb@suse.de>
-
Jens Axboe authored
If we know we are going to punt to kblockd, we can drop the queue lock before calling into __blk_run_queue() since it only does a safe bit test and a workqueue call. Since kblockd needs to grab this very lock as one of the first things it does, it's a good optimization to drop the lock before waking kblockd. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Jens Axboe authored
MD can't use this since it really requires us to be able to keep more than a single piece of state for the unplug. Commit 048c9374 added the required support for MD, so get rid of this now unused code. This reverts commit f7566457. Conflicts: block/blk-core.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-