- 09 Apr, 2013 13 commits
-
-
Christian König authored
Just until we get proper DPM for that. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
v2: avoid 64bit divide v3: rv740 uses the evegreen upll configuration Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
-
Christian König authored
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
v2: remove unneeded register definitions Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
v2: write clk registers only once! v3: update cg scratch register properly v4: add TN support Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Just everything needed to decode videos using UVD. v6: just all the bugfixes and support for R7xx-SI merged in one patch v7: UVD_CGC_GATE is a write only register, lockup detection fix v8: split out VRAM fallback changes, remove support for RV770, add support for HEMLOCK, add buffer sizes checks Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Let the CS module decide if we can fall back to VRAM or not. v2: remove unintended change Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
v2: update error message and comment Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Samuel Li authored
This patch allows the CPU to map the stolen vram segment directly rather than going through the PCI BAR. This significantly improves performance for certain workloads with a properly patched ddx. Use radeon.fastfb=1 to enable it (disabled by default). Currently only supported on RS690, but support for RS780/880 and newer APUs may be added eventually. Signed-off-by: Samuel Li <samuel.li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
A new tiling config register for the display blocks was added on DCE6. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=62889 https://bugs.freedesktop.org/show_bug.cgi?id=57919Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
Add a per-asic MC (memory controller) mask which holds the mak address mask the asic is capable of. Use this when calculating the vram and gtt locations rather using asic specific functions or limiting everything to 32 bits. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 08 Apr, 2013 1 commit
-
-
Alex Deucher authored
Doesn't affect anything as the same address gets written in both cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 01 Apr, 2013 2 commits
-
-
Alex Deucher authored
Monitors seem to prefer it. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37696Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
It doesn't work reliably. Just report back the currently selected engine clock. Partially fixes: https://bugs.freedesktop.org/show_bug.cgi?id=62493Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 25 Mar, 2013 2 commits
-
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
Daniel writes: "Just three revert/disable by default patches, one of them cc: stable (since the offending commit was cc: stable, too)." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: Revert "drm/i915: write backlight harder" drm/i915: don't disable the power well yet Revert "drm/i915: set TRANSCODER_EDP even earlier"
-
Dave Airlie authored
Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into HEAD Inki writes: Includes bug fixes and code cleanups. And it considers some restrictions to G2D hardware. With this, the malfunction and page fault issues to g2d driver would be fixed. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Check g2d cmd list for g2d restrictions drm/exynos: Add a new function to get gem buffer size drm/exynos: Deal with g2d buffer info more efficiently drm/exynos: Clean up some G2D codes for readability drm/exynos: Fix G2D core malfunctioning issue drm/exynos: clear node object type at gem unmap drm/exynos: Fix error routine to getting dma addr. drm/exynos: Replaced kzalloc & memcpy with kmemdup drm/exynos: fimd: calculate the correct address offset drm/exynos: Make mixer_check_timing static drm/exynos: modify the compatible string for exynos fimd
-
- 24 Mar, 2013 3 commits
-
-
Daniel Vetter authored
This reverts commit cf0a6584. Turns out that cargo-culting breaks systems. Note that we can't revert further, since commit 770c1231 Author: Takashi Iwai <tiwai@suse.de> Date: Sat Aug 11 08:56:42 2012 +0200 drm/i915: Fix blank panel at reopening lid fixed a regression in 3.6-rc kernels for which we've never figured out the exact root cause. But some further inspection of the backlight code reveals that it's seriously lacking locking. And especially the asle backlight update is know to get fired (through some smm magic) when writing specific backlight control registers. So the possibility of suffering from races is rather real. Until those races are fixed I don't think it makes sense to try further hacks. Which sucks a bit, but sometimes that's how it is :( References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47941Tested-by: Takashi Iwai <tiwai@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: stable@vger.kernel.org (the reverted commit was cc: stable, too) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
We're still not 100% ready to disable the power well, so don't disable it for now. When we disable it we break the audio driver (because some of the audio registers are on the power well) and machines with eDP on port D (because it doesn't use TRANSCODER_EDP). Also, instead of just reverting the code, add a Kernel option to let us disable it if we want. This will allow us to keep developing and testing the feature while it's not enabled. This fixes problems caused by the following commit: commit d6dd9eb1 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jan 29 16:35:20 2013 -0200 drm/i915: dynamic Haswell display power well support References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html Cc: Takashi Iwai <tiwai@suse.de> Cc: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
This reverts commit cc464b2a. The reason is that Takashi Iwai reported a regression bisected to this commit: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html His machine has eDP on port D (usual desktop all-in-on setup), which intel_dp.c identifies as an eDP panel, but the hsw ddi code mishandles. Closer inspection of the code reveals that haswell_crtc_mode_set also checks intel_encoder_is_pch_edp when setting is_cpu_edp. On haswell that doesn't make much sense (since there's no edp on the pch), but what this function _really_ checks is whether that edp connector is on port A or port D. It's just that on ilk-ivb port D was on the pch ... So that explains why this seemingly innocent change killed eDP on port D. Furthermore it looks like everything else accidentally works, since we've never enabled eDP on port D support for hsw intentionally (e.g. we still register the HDMI output for port D in that case). But in retrospective I also don't like that this leaks highly platform specific details into common code, and the reason is that the drm vblank layer sucks. So instead I think we should: - move the cpu_transcoder into the dynamic pipe_config tracking (once that's merged). - fix up the drm vblank layer to finally deal with kms crtc objects instead of int pipes. v2: Pimp commit message with the better diagnosis as discussed with Paulo on irc. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 23 Mar, 2013 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "These are mostly minor fixes this time around. The iscsi-target CHAP big-endian bugfix and bump FD_MAX_SECTORS=2048 default patch to allow 1MB sized I/Os for FILEIO backends on >= v3.5 code are both CC'ed to stable. Also, there is a persistent reservations regression that has recently been reported for >= v3.8.x code, that is currently being tracked down for v3.9." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/pscsi: Reject cross page boundary case in pscsi_map_sg target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/Os tcm_vhost: Flush vhost_work in vhost_scsi_flush() tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint() target: fix possible memory leak in core_tpg_register() target/iscsi: Fix mutual CHAP auth on big-endian arches target_core_sbc: use noop for SYNCHRONIZE_CACHE
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md fixes from NeilBrown: "A few bugfixes for md - recent regressions in raid5 - recent regressions in dmraid - a few instances of CONFIG_MULTICORE_RAID456 linger Several tagged for -stable" * tag 'md-3.9-fixes' of git://neil.brown.name/md: md: remove CONFIG_MULTICORE_RAID456 entirely md/raid5: ensure sync and DISCARD don't happen at the same time. MD: Prevent sysfs operations on uninitialized kobjects MD RAID5: Avoid accessing gendisk or queue structs when not available md/raid5: schedule_construction should abort if nothing to do.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
Pull libata updates from Jeff Garzik: "Simple stuff. See one-line summaries." * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_samsung_cf: use module_platform_driver_probe() [libata] Avoid specialized TLA's in ZPODD's Kconfig libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource sata_fsl: Remove redundant NULL check before kfree ahci: Add Device IDs for Intel Wellsburg PCH ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "One bugfix for the tegra driver. Two updates regarding email addresses and MAINTAINERS which I like to have up-to-date so people can be reached immediately. While we are here, there is on PCI_ID addition." * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: add maintainer entry for atmel i2c driver i2c: Fix my e-mail address in drivers and documentation i2c: iSMT: add Intel Avoton DeviceIDs i2c: tegra: check the clk_prepare_enable() return value
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: "Fix a boot issues and correct the AcpiMmioSel bitmask in the sp5100_tco watchdog device driver" * git://www.linux-watchdog.org/linux-watchdog: watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2 watchdog: sp5100_tco: Remove code that may cause a boot failure
-
Torsten Duwe authored
When KMS has parsed an EDID "detailed timing", it leaves the frame rate zeroed. Consecutive (debug-) output of that mode thus yields 0 for vsync. This simple fix also speeds up future invocations of drm_mode_vrefresh(). While it is debatable whether this qualifies as a -stable fix I'd apply it for consistency's sake; drm_helper_probe_single_connector_modes() does the same thing already for all probed modes. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Torsten Duwe authored
EDID spreads some values across multiple bytes; bit-fiddling is needed to retrieve these. The current code to parse "detailed timings" has a cut&paste error that results in a vsync offset of at most 15 lines instead of 63. See http://en.wikipedia.org/wiki/EDID and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why that needs to be a left shift. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Mar, 2013 11 commits
-
-
git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds authored
Pull NVMe driver update from Matthew Wilcox: "These patches have mostly been baking for a few months; sorry I didn't get them in during the merge window. They're all bug fixes, except for the addition of the SMART log and the addition to MAINTAINERS." * git://git.infradead.org/users/willy/linux-nvme: NVMe: Add namespaces with no LBA range feature MAINTAINERS: Add entry for the NVMe driver NVMe: Initialize iod nents to 0 NVMe: Define SMART log NVMe: Add result to nvme_get_features NVMe: Set result from user admin command NVMe: End queued bio requests when freeing queue NVMe: Free cmdid on nvme_submit_bio error
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mqueue: sys_mq_open: do not call mnt_drop_write() if read-only mm/hotplug: only free wait_table if it's allocated by vmalloc dma-debug: update DMA debug API to better handle multiple mappings of a buffer dma-debug: fix locking bug in check_unmap() drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR drivers/video/ep93xx-fb.c: include <linux/io.h> for devm_ioremap() drivers/rtc/rtc-da9052.c: fix for rtc device registration mm: zone_end_pfn is too small poweroff: change orderly_poweroff() to use schedule_work() mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting printk: Provide a wake_up_klogd() off-case irq_work.h: fix warning when CONFIG_IRQ_WORK=n
-
Vladimir Davydov authored
mnt_drop_write() must be called only if mnt_want_write() succeeded, otherwise the mnt_writers counter will diverge. mnt_writers counters are used to check if remounting FS as read-only is OK, so after an extra mnt_drop_write() call, it would be impossible to remount mqueue FS as read-only. Besides, on umount a warning would be printed like this one: ===================================== [ BUG: bad unlock balance detected! ] 3.9.0-rc3 #5 Not tainted ------------------------------------- a.out/12486 is trying to release lock (sb_writers) at: mnt_drop_write+0x1f/0x30 but there are no more locks to release! Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Doug Ledford <dledford@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jianguo Wu authored
zone->wait_table may be allocated from bootmem, it can not be freed. Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Duyck authored
There were reports of the igb driver unmapping buffers without calling dma_mapping_error. On closer inspection issues were found in the DMA debug API and how it handled multiple mappings of the same buffer. The issue I found is the fact that the debug_dma_mapping_error would only set the map_err_type to MAP_ERR_CHECKED in the case that the was only one match for device and device address. However in the case of non-IOMMU, multiple addresses existed and as a result it was not setting this field once a second mapping was instantiated. I have resolved this by changing the search so that it instead will now set MAP_ERR_CHECKED on the first buffer that matches the device and DMA address that is currently in the state MAP_ERR_NOT_CHECKED. A secondary side effect of this patch is that in the case of multiple buffers using the same address only the last mapping will have a valid map_err_type. The previous mappings will all end up with map_err_type set to MAP_ERR_CHECKED because of the dma_mapping_error call in debug_dma_map_page. However this behavior may be preferable as it means you will likely only see one real error per multi-mapped buffer, versus the current behavior of multiple false errors mer multi-mapped buffer. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Reviewed-by: Shuah Khan <shuah.khan@hp.com> Tested-by: Shuah Khan <shuah.khan@hp.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Duyck authored
In check_unmap() it is possible to get into a dead-locked state if dma_mapping_error is called. The problem is that the bucket is locked in check_unmap, and locked again by debug_dma_mapping_error which is called by dma_mapping_error. To resolve that we must release the lock on the bucket before making the call to dma_mapping_error. [akpm@linux-foundation.org: restore 80-col trickery to be consistent with the rest of the file] Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Reviewed-by: Shuah Khan <shuah.khan@hp.com> Tested-by: Shuah Khan <shuah.khan@hp.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicolas Ferre authored
On some revisions of AT91 SoCs, the RTC IMR register is not working. Instead of elaborating a workaround for that specific SoC or IP version, we simply use a software variable to store the Interrupt Mask Register and modify it for each enabling/disabling of an interrupt. The overhead of this is negligible anyway. The interrupt mask register (IMR) for the RTC is broken on the AT91SAM9x5 sub-family of SoCs (good overview of the members here: http://www.eewiki.net/display/linuxonarm/AT91SAM9x5 ). The "user visible effect" is the RTC doesn't work. That sub-family is less than two years old and only has devicetree (DT) support and came online circa lk 3.7 . The dust is yet to settle on the DT stuff at least for AT91 SoCs (translation: lots of stuff is still broken, so much that it is hard to know where to start). The fix in the patch is pretty simple: just shadow the silicon IMR register with a variable in the driver. Some older SoCs (pre-DT) use the the rtc-at91rm9200 driver (e.g. obviously the AT91RM9200) and they should not be impacted by the change. There shouldn't be a large volume of interrupts associated with a RTC. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
H Hartley Sweeten authored
Commit be867814 ("drivers/video/ep93xx-fb.c: use devm_ functions") introduced a build error: drivers/video/ep93xx-fb.c: In function 'ep93xxfb_probe': drivers/video/ep93xx-fb.c:532: error: implicit declaration of function 'devm_ioremap' drivers/video/ep93xx-fb.c:533: warning: assignment makes pointer from integer without a cast Include <linux/io.h> to pickup the declaration of 'devm_ioremap'. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Ryan Mallon <rmallon@gmail.com> Cc: Damien Cassou <damien.cassou@lifl.fr> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ashish Jangam authored
Add support for the virtual irq since now MFD only handles virtual irq Without this patch rtc device will fail in registration. (akpm: Ashish has a different version whcih will be needed for 3.8.x and earlier kernels) Signed-off-by: Ashish <ashish.jangam@kpitcummins.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Russ Anderson authored
Booting with 32 TBytes memory hits BUG at mm/page_alloc.c:552! (output below). The key hint is "page 4294967296 outside zone". 4294967296 = 0x100000000 (bit 32 is set). The problem is in include/linux/mmzone.h: 530 static inline unsigned zone_end_pfn(const struct zone *zone) 531 { 532 return zone->zone_start_pfn + zone->spanned_pages; 533 } zone_end_pfn is "unsigned" (32 bits). Changing it to "unsigned long" (64 bits) fixes the problem. zone_end_pfn() was added recently in commit 108bcc96 ("mm: add & use zone_end_pfn() and zone_spans_pfn()") Output from the failure. No AGP bridge found page 4294967296 outside zone [ 4294967296 - 4327469056 ] ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:552! invalid opcode: 0000 [#1] SMP Modules linked in: CPU 0 Pid: 0, comm: swapper Not tainted 3.9.0-rc2.dtp+ #10 RIP: free_one_page+0x382/0x430 Process swapper (pid: 0, threadinfo ffffffff81942000, task ffffffff81955420) Call Trace: __free_pages_ok+0x96/0xb0 __free_pages+0x25/0x50 __free_pages_bootmem+0x8a/0x8c __free_memory_core+0xea/0x131 free_low_memory_core_early+0x4a/0x98 free_all_bootmem+0x45/0x47 mem_init+0x7b/0x14c start_kernel+0x216/0x433 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x144/0x153 Code: 89 f1 ba 01 00 00 00 31 f6 d3 e2 4c 89 ef e8 66 a4 01 00 e9 2c fe ff ff 0f 0b eb fe 0f 0b 66 66 2e 0f 1f 84 00 00 00 00 00 eb f3 <0f> 0b eb fe 0f 0b 0f 1f 84 00 00 00 00 00 eb f6 0f 0b eb fe 49 Signed-off-by: Russ Anderson <rja@sgi.com> Reported-by: George Beshers <gbeshers@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
David said: Commit 6c0c0d4d ("poweroff: fix bug in orderly_poweroff()") apparently fixes one bug in orderly_poweroff(), but introduces another. The comments on orderly_poweroff() claim it can be called from any context - and indeed we call it from interrupt context in arch/powerpc/platforms/pseries/ras.c for example. But since that commit this is no longer safe, since call_usermodehelper_fns() is not safe in interrupt context without the UMH_NO_WAIT option. orderly_poweroff() can be used from any context but UMH_WAIT_EXEC is sleepable. Move the "force" logic into __orderly_poweroff() and change orderly_poweroff() to use the global poweroff_work which simply calls __orderly_poweroff(). While at it, remove the unneeded "int argc" and change argv_split() to use GFP_KERNEL. We use the global "bool poweroff_force" to pass the argument, this can obviously affect the previous request if it is pending/running. So we only allow the "false => true" transition assuming that the pending "true" should succeed anyway. If schedule_work() fails after that we know that work->func() was not called yet, it must see the new value. This means that orderly_poweroff() becomes async even if we do not run the command and always succeeds, schedule_work() can only fail if the work is already pending. We can export __orderly_poweroff() and change the non-atomic callers which want the old semantics. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: David Gibson <david@gibson.dropbear.id.au> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Feng Hong <hongfeng@marvell.com> Cc: Kees Cook <keescook@chromium.org> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-