Pull arm64 fixes from Will Deacon:
 "Nothing earth-shattering, really - some CPU errata workarounds (one
  day they'll get it right, ha!) and a fix for a boot failure with very
  large kernel images where the alternative patching gets confused when
  patching relative branches using veneers.

   - Fix alternative patching for very large kernel images and modules

   - Hook up existing CPU errata workarounds for Qualcomm Kryo CPUs"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Add KRYO4XX silver CPU cores to erratum list 1530923 and 1024718
  arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040
  arm64: Add MIDR value for KRYO4XX gold CPU cores
  arm64/alternatives: use subsections for replacement sequences

Pull xen fixes from Juergen Gross:
 "One small cleanup patch for ARM and two patches for the xenbus driver
  fixing latent problems (large stack allocations and bad return code
  settings)"

* tag 'for-linus-5.8b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/xenbus: let xenbus_map_ring_valloc() return errno values only
  xen/xenbus: avoid large structs and arrays on the stack
  arm/xen: remove the unused macro GRANT_TABLE_PHYSADDR

Pull sysctl fix from Al Viro:
 "Another regression fix for sysctl changes this cycle..."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Call sysctl_head_finish on error

Pull cifs fixes from Steve French:
 "Eight cifs/smb3 fixes, most when specifying the multiuser mount flag.

  Five of the fixes are for stable"

* tag '5.8-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: prevent truncation from long to int in wait_for_free_credits
  cifs: Fix the target file was deleted when rename failed.
  SMB3: Honor 'posix' flag for multiuser mounts
  SMB3: Honor 'handletimeout' flag for multiuser mounts
  SMB3: Honor lease disabling for multiuser mounts
  SMB3: Honor persistent/resilient handle flags for multiuser mounts
  SMB3: Honor 'seal' flag for multiuser mounts
  cifs: Display local UID details for SMB sessions in DebugData

Merge tag 'hwmon-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix typo in Kconfig SENSORS_IR35221 option

 - Fix potential memory leak in acpi_power_meter_add()

 - Make sure the OVERT mask is set correctly in max6697 driver

 - In PMBus core, fix page vs. register when accessing fans

 - Mark is_visible functions static in bt1-pvt driver

 - Define Temp- and Volt-to-N poly as maybe-unused in bt1-pvt driver

* tag 'hwmon-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (pmbus) fix a typo in Kconfig SENSORS_IR35221 option
  hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add()
  hwmon: (max6697) Make sure the OVERT mask is set correctly
  hwmon: (pmbus) Fix page vs. register when accessing fans
  hwmon: (bt1-pvt) Mark is_visible functions static
  hwmon: (bt1-pvt) Define Temp- and Volt-to-N poly as maybe-unused

Merge misc fixes from Andrew Morton:
 "Subsystems affected by this patch series: mm/hugetlb, samples, mm/cma,
  mm/vmalloc, mm/pagealloc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/page_alloc: fix documentation error
  vmalloc: fix the owner argument for the new __vmalloc_node_range callers
  mm/cma.c: use exact_nid true to fix possible per-numa cma leak
  samples/vfs: avoid warning in statx override
  mm/hugetlb.c: fix pages per hugetlb calculation

When I increased the upper bound of the min_free_kbytes value in
ee8eb9a5 ("mm/page_alloc: increase default min_free_kbytes bound") I
forgot to tweak the above comment to reflect the new value.  This patch
fixes that mistake.
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Fabrizio D'Angelo <fdangelo@redhat.com>
Link: http://lkml.kernel.org/r/20200624221236.29560-1-jsavitz@redhat.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the recently added new __vmalloc_node_range callers to pass the
correct values as the owner for display in /proc/vmallocinfo.

Fixes: 800e26b8 ("x86/hyperv: allocate the hypercall page with only read and execute bits")
Fixes: 10d5e97c ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Fixes: 7a0e27b2 ("mm: remove vmalloc_exec")
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200627075649.2455097-1-hch@lst.deSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Calling cma_declare_contiguous_nid() with false exact_nid for per-numa
reservation can easily cause cma leak and various confusion.  For example,
mm/hugetlb.c is trying to reserve per-numa cma for gigantic pages.  But it
can easily leak cma and make users confused when system has memoryless
nodes.

In case the system has 4 numa nodes, and only numa node0 has memory.  if
we set hugetlb_cma=4G in bootargs, mm/hugetlb.c will get 4 cma areas for 4
different numa nodes.  since exact_nid=false in current code, all 4 numa
nodes will get cma successfully from node0, but hugetlb_cma[1 to 3] will
never be available to hugepage will only allocate memory from
hugetlb_cma[0].

In case the system has 4 numa nodes, both numa node0&2 has memory, other
nodes have no memory.  if we set hugetlb_cma=4G in bootargs, mm/hugetlb.c
will get 4 cma areas for 4 different numa nodes.  since exact_nid=false in
current code, all 4 numa nodes will get cma successfully from node0 or 2,
but hugetlb_cma[1] and [3] will never be available to hugepage as
mm/hugetlb.c will only allocate memory from hugetlb_cma[0] and
hugetlb_cma[2].  This causes permanent leak of the cma areas which are
supposed to be used by memoryless node.

Of cource we can workaround the issue by letting mm/hugetlb.c scan all cma
areas in alloc_gigantic_page() even node_mask includes node0 only.  that
means when node_mask includes node0 only, we can get page from
hugetlb_cma[1] to hugetlb_cma[3].  But this will cause kernel crash in
free_gigantic_page() while it wants to free page by:
cma_release(hugetlb_cma[page_to_nid(page)], page, 1 << order)

On the other hand, exact_nid=false won't consider numa distance, it might
be not that useful to leverage cma areas on remote nodes.  I feel it is
much simpler to make exact_nid true to make everything clear.  After that,
memoryless nodes won't be able to reserve per-numa CMA from other nodes
which have memory.

Fixes: cf11e85f ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andreas Schaufler <andreas.schaufler@gmx.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200628074345.27228-1-song.bao.hua@hisilicon.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Something changed recently to uncover this warning:

  samples/vfs/test-statx.c:24:15: warning: `struct foo' declared inside parameter list will not be visible outside of this definition or declaration
     24 | #define statx foo
        |               ^~~

Which is due the use of "struct statx" (here, "struct foo") in a function
prototype argument list before it has been defined:

 int
 # 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h"
    foo
 # 56 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4
          (int __dirfd, const char *__restrict __path, int __flags,
            unsigned int __mask, struct
 # 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h"
                                       foo
 # 57 "/usr/include/x86_64-linux-gnu/bits/statx-generic.h" 3 4
                                             *__restrict __buf)
   __attribute__ ((__nothrow__ , __leaf__)) __attribute__ ((__nonnull__ (2, 5)));

Add explicit struct before #include to avoid warning.

Fixes: f1b5618e ("vfs: Add a sample program for the new mount API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/202006282213.C516EA6@keescookSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The routine hpage_nr_pages() was incorrectly used to calculate the number
of base pages in a hugetlb page.  hpage_nr_pages is designed to be called
for THP pages and will return HPAGE_PMD_NR for hugetlb pages of any size.

Due to the context in which hpage_nr_pages was called, it is unlikely to
produce a user visible error.  The routine with the incorrect call is only
exercised in the case of hugetlb memory error or migration.  In addition,
this would need to be on an architecture which supports huge page sizes
less than PMD_SIZE.  And, the vma containing the huge page would also need
to smaller than PMD_SIZE.

Fixes: c0d0381a ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200629185003.97202-1-mike.kravetz@oracle.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs fix from Darrick Wong:
 "Fix a use-after-free bug when the fs shuts down"

* tag 'xfs-5.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix use-after-free on CIL context on shutdown

Pull PCI fix from Bjorn Helgaas:
 "Fix a pcie_find_root_port() simplification that broke power management
  because it didn't handle the edge case of finding the Root Port of a
  Root Port itself (Mika Westerberg)""

* tag 'pci-v5.8-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Make pcie_find_root_port() work for Root Ports

Pull ACPI updates from Rafael Wysocki:
 "Add a new device ID for Intel Tiger Lake to the DPTF battery
  participant driver (Srinivas Pandruvada) and fix the Tiger Lake fan
  device ID (Sumeet Pawnikar)"

* tag 'acpi-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: fan: Fix Tiger Lake ACPI device ID
  ACPI: DPTF: Add battery participant for TigerLake

Pull gfs2 fixes from Andreas Gruenbacher:
 "Various gfs2 fixes"

* tag 'gfs2-v5.8-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: The freeze glock should never be frozen
  gfs2: When freezing gfs2, use GL_EXACT and not GL_NOCACHE
  gfs2: read-only mounts should grab the sd_freeze_gl glock
  gfs2: freeze should work on read-only mounts
  gfs2: eliminate GIF_ORDERED in favor of list_empty
  gfs2: Don't sleep during glock hash walk
  gfs2: fix trans slab error when withdraw occurs inside log_flush
  gfs2: Don't return NULL from gfs2_inode_lookup

Pull drm fixes from Dave Airlie:
 "Pretty usual rc4 pull: two usual amdgpu, i915 pulls, and some misc arm
  driver fixes.

  The bigger bit is including the asm sources for some GPU shaders that
  were contained in the i915 driver, otherwise it's pretty much business
  as usual.

  dma-buf:
   - fix a use-after-free bug

  amdgpu:
   - Fix for vega20 boards without RAS support
   - DC bandwidth revalidation fix
   - Fix Renoir vram info fetching
   - Fix hwmon freq printing

  i915:
   - GVT fixes
      - Two missed MMIO handler fixes for SKL/CFL
      - Fix mask register bits check
      - Fix one lockdep error for debugfs entry access
   - Include asm sources for render cache clear batches

  msm:
   - memleak fix
   - display block fix
   - address space fixes

  exynos:
   - error value and reference count fix
   - error print removal

  sun4i:
   - remove HPD polling"

* tag 'drm-fixes-2020-07-03' of git://anongit.freedesktop.org/drm/drm: (22 commits)
  drm/amdgpu: use %u rather than %d for sclk/mclk
  drm/amdgpu/atomfirmware: fix vram_info fetching for renoir
  drm/amd/display: Only revalidate bandwidth on medium and fast updates
  drm: sun4i: hdmi: Remove extra HPD polling
  drm/i915: Include asm sources for {ivb, hsw}_clear_kernel.c
  drm/exynos: fix ref count leak in mic_pre_enable
  drm/exynos: Properly propagate return value in drm_iommu_attach_device()
  drm/exynos: Remove dev_err() on platform_get_irq() failure
  drm/amd/powerplay: Fix NULL dereference in lock_bus() on Vega20 w/o RAS
  dma-buf: Move dma_buf_release() from fops to dentry_ops
  drm/msm: Fix up the rest of the messed up address sizes
  drm/msm: Fix setup of a6xx create_address_space.
  drm/msm: Fix address space size after refactor.
  drm/i915/gvt: Use GFP_ATOMIC instead of GFP_KERNEL in atomic context
  drm/i915/gvt: Fix incorrect check of enabled bits in mask registers
  drm/i915/gvt: Fix two CFL MMIO handling caused by regression.
  drm/i915/gvt: Add one missing MMIO handler for D_SKL_PLUS
  drm/msm: Fix 0xfffflub in "Refactor address space initialization"
  drm/msm/dpu: allow initialization of encoder locks during encoder init
  drm/msm/dpu: fix error return code in dpu_encoder_init
  ...

This error path returned directly instead of calling sysctl_head_finish().

Fixes: ef9d965b ("sysctl: reject gigantic reads/write to sysctl files")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

KRYO4XX silver/LITTLE CPU cores with revision r1p0 are affected by
erratum 1530923 and 1024718, so add them to the respective list.
The variant and revision bits are implementation defined and are
different from the their Cortex CPU counterparts on which they are
based on, i.e., r1p0 is equivalent to rdpe.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/7013e8a3f857ca7e82863cc9e34a614293d7f80c.1593539394.git.saiprakash.ranjan@codeaurora.orgSigned-off-by: Will Deacon <will@kernel.org>

KRYO4XX gold/big CPU core revisions r0p0 to r3p1 are affected by
erratum 1463225 and 1418040, so add them to the respective list.
The variant and revision bits are implementation defined and are
different from the their Cortex CPU counterparts on which they are
based on, i.e., (r0p0 to r3p1) is equivalent to (rcpe to rfpf).
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/83780e80c6377c12ca51b5d53186b61241685e49.1593539394.git.saiprakash.ranjan@codeaurora.orgSigned-off-by: Will Deacon <will@kernel.org>

Add MIDR value for KRYO4XX gold/big CPU cores which are
used in Qualcomm Technologies, Inc. SoCs. This will be
used to identify and apply erratum which are applicable
for these CPU cores.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/9093fb82e22441076280ca1b729242ffde80c432.1593539394.git.saiprakash.ranjan@codeaurora.orgSigned-off-by: Will Deacon <will@kernel.org>

* acpi-fan:
  ACPI: fan: Fix Tiger Lake ACPI device ID

Before this patch, some gfs2 code locked the freeze glock with LM_FLAG_NOEXP
(Do not freeze) flag, and some did not. We never want to freeze the freeze
glock, so this patch makes it consistently use LM_FLAG_NOEXP always.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Before this patch, the freeze code in gfs2 specified GL_NOCACHE in
several places. That's wrong because we always want to know the state
of whether the file system is frozen.

There was also a problem with freeze/thaw transitioning the glock from
frozen (EX) to thawed (SH) because gfs2 will normally grant glocks in EX
to processes that request it in SH mode, unless GL_EXACT is specified.
Therefore, the freeze/thaw code, which tried to reacquire the glock in
SH mode would get the glock in EX mode, and miss the transition from EX
to SH. That made it think the thaw had completed normally, but since the
glock was still cached in EX, other nodes could not freeze again.

This patch removes the GL_NOCACHE flag to allow the freeze glock to be
cached. It also adds the GL_EXACT flag so the glock is fully transitioned
from EX to SH, thereby allowing future freeze operations.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Before this patch, only read-write mounts would grab the freeze
glock in read-only mode, as part of gfs2_make_fs_rw. So the freeze
glock was never initialized. That meant requests to freeze, which
request the glock in EX, were granted without any state transition.
That meant you could mount a gfs2 file system, which is currently
frozen on a different cluster node, in read-only mode.

This patch makes read-only mounts lock the freeze glock in SH mode,
which will block for file systems that are frozen on another node.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Before this patch, function freeze_go_sync, called when promoting
the freeze glock, was testing for the SDF_JOURNAL_LIVE superblock flag.
That's only set for read-write mounts. Read-only mounts don't use a
journal, so the bit is never set, so the freeze never happened.

This patch removes the check for SDF_JOURNAL_LIVE for freeze requests
but still checks it when deciding whether to flush a journal.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

In several places, we used the GIF_ORDERED inode flag to determine
if an inode was on the ordered writes list. However, since we always
held the sd_ordered_lock spin_lock during the manipulation, we can
just as easily check list_empty(&ip->i_ordered) instead.
This allows us to keep more than one ordered writes list to make
journal writing improvements.

This patch eliminates GIF_ORDERED in favor of checking list_empty.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>

Pull m68knommu mm fixes from Greg Ungerer:
 "Two critical mm related fixes that affect booting of m68k/ColdFire
  devices.

  Both fix problems caused by recent system init memblock changes"

* tag 'm68knommu-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: mm: fix node memblock init
  m68k: nommu: register start of the memory with memblock

Pull devicetree fixes from Rob Herring:

 - Sync dtc to upstream to pick up fixes for I2C bus checks and quiet
   warnings

 - Various fixes for DT binding check warnings

 - A couple of build fixes/improvements for binding checks

 - ReST formatting improvements for writing-schema.rst

 - Document reference fixes

* tag 'devicetree-fixes-for-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: clock: imx: Fix e-mail address
  dt-bindings: thermal: k3: Fix the reg property
  dt-bindings: thermal: Remove soc unit address
  dt-bindings: display: arm: versatile: Pass the sysreg unit name
  dt-bindings: usb: aspeed: Remove the leading zeroes
  dt-bindings: copy process-schema-examples.yaml to process-schema.yaml
  dt-bindings: do not build processed-schema.yaml for 'make dt_binding_check'
  dt-bindings: fix error in 'make clean' after 'make dt_binding_check'
  dt-bindings: mailbox: zynqmp_ipi: fix unit address
  dt-bindings: bus: uniphier-system-bus: fix warning in example
  scripts/dtc: Update to upstream version v1.6.0-11-g9d7888cbf19c
  doc: devicetree: bindings: fix spelling mistake
  docs: dt: minor adjustments at writing-schema.rst
  dt: fix reference to olpc,xo1.75-ec.txt
  dt: Fix broken references to renamed docs
  dt: fix broken links due to txt->yaml renames
  dt: update a reference for reneases pcar file renamed to yaml

Pull data race annotation from Christian Brauner:
 "This contains an annotation patch for a data race in copy_process()
  reported by KCSAN when reading and writing nr_threads.

  The data race is intentional and benign. This is obvious from the
  comment above the relevant code and based on general consensus when
  discussing this issue. So simply using data_race() to annotate this as
  an intentional race seems the best option"

* tag 'for-linus-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  fork: annotate data race in copy_process()

Pull tpm fixes from Jarkko Sakkinen:
 "These are just fixes for bugs found lately.

  All of them are small scale things here and there, and all of them are
  for previous kernel releases (the oldest appeared in v2.6.17)"

* tag 'tpmdd-next-v5.8-rc4' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm_tis: Remove the HID IFX0102
  tpm_tis_spi: Prefer async probe
  tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes
  tpm/st33zp24: fix spelling mistake "drescription" -> "description"
  tpm_tis: extra chip->ops check on error path in tpm_tis_core_init
  tpm_tis_spi: Don't send anything during flow control
  tpm: Fix TIS locality timeout problems

Merge tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "tpm test fixes from Jarkko Sakkinen"

* tag 'linux-kselftest-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: tpm: Use /bin/sh instead of /bin/bash
  selftests: tpm: Use 'test -e' instead of 'test -f'
  Revert "tpm: selftest: cleanup after unseal with wrong auth/policy test"

Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah Khan
 "Fixes for build and run-times failures.

  Also includes troubleshooting tips updates to kunit user
  documentation"

* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Documentation: kunit: Add some troubleshooting tips to the FAQ
  kunit: kunit_tool: Fix invalid result when build fails
  kunit: show error if kunit results are not present
  kunit: kunit_config: Fix parsing of CONFIG options with space

Pull nfsd fixes from Bruce Fields:
 "Fixes for a umask bug on exported filesystems lacking ACL support, a
  leak and a module unloading bug in the /proc/fs/nfsd/clients/ code,
  and a compile warning"

* tag 'nfsd-5.8-1' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: Add missing definition of ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
  nfsd: fix nfsdfs inode reference count leak
  nfsd4: fix nfsdfs reference count loop
  nfsd: apply umask on fs without ACL support

 * dma-buf: fix a use-after-free bug

 * sun4i: remove HPD polling
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702075143.GA25040@linux-uq9g

Fix a typo in SENSORS_IR35221 option: module name should be "ir35221"
instead of "ir35521".

Fixes: 8991ebd9 ("hwmon: (pmbus) Add client driver for IR35221")

Cc: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Link: https://lore.kernel.org/r/20200702221349.18139-1-rentao.bupt@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Pull block fixes from Jens Axboe:

 - Use kvfree_sensitive() for the block keyslot free (Eric)

 - Sync blk-mq debugfs flags (Hou)

 - Memory leak fix in virtio-blk error path (Hou)

* tag 'block-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
  virtio-blk: free vblk-vqs in error path of virtblk_probe()
  block/keyslot-manager: use kvfree_sensitive()
  blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags

Pull io_uring fixes from Jens Axboe:
 "One fix in here, for a regression in 5.7 where a task is waiting in
  the kernel for a condition, but that condition won't become true until
  task_work is run. And the task_work can't be run exactly because the
  task is waiting in the kernel, so we'll never make any progress.

  One example of that is registering an eventfd and queueing io_uring
  work, and then the task goes and waits in eventfd read with the
  expectation that it'll get woken (and read an event) when the io_uring
  request completes. The io_uring request is finished through task_work,
  which won't get run while the task is looping in eventfd read"

* tag 'io_uring-5.8-2020-07-01' of git://git.kernel.dk/linux-block:
  io_uring: use signal based task_work running
  task_work: teach task_work_add() to do signal_wake_up()

Today xenbus_map_ring_valloc() can return either a negative errno
value (-ENOMEM or -EINVAL) or a grant status value. This is a mess as
e.g -ENOMEM and GNTST_eagain have the same numeric value.

Fix that by turning all grant mapping errors into -ENOENT. This is
no problem as all callers of xenbus_map_ring_valloc() only use the
return value to print an error message, and in case of mapping errors
the grant status value has already been printed by __xenbus_map_ring()
before.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200701121638.19840-3-jgross@suse.comSigned-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

xenbus_map_ring_valloc() and its sub-functions are putting quite large
structs and arrays on the stack. This is problematic at runtime, but
might also result in build failures (e.g. with clang due to the option
-Werror,-Wframe-larger-than=... used).

Fix that by moving most of the data from the stack into a dynamically
allocated struct. Performance is no issue here, as
xenbus_map_ring_valloc() is used only when adding a new PV device to
a backend driver.

While at it move some duplicated code from pv/hvm specific mapping
functions to the single caller.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200701121638.19840-2-jgross@suse.comSigned-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Acer C720 running Linux v5.3 reports this in klog:

tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis tpm_tis: Could not get TPM timeouts and durations
tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
tpm tpm0: tpm_try_transmit: send(): error -5
tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts
tpm_tis 00:08: Could not get TPM timeouts and durations
ima: No TPM chip found, activating TPM-bypass!
tpm_inf_pnp 00:08: Found TPM with ID IFX0102

% git --no-pager grep IFX0102 drivers/char/tpm
drivers/char/tpm/tpm_infineon.c:	{"IFX0102", 0},
drivers/char/tpm/tpm_tis.c:	{"IFX0102", 0},		/* Infineon */

Obviously IFX0102 was added to the HID table for the TCG TIS driver by
mistake.

Fixes: 93e1b7d4 ("[PATCH] tpm: add HID module parameter")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877
Cc: stable@vger.kernel.org
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Reported-by: Ferry Toth: <ferry.toth@elsinga.info>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>