- 21 Aug, 2020 14 commits
-
-
Logan Gunthorpe authored
When locking the ctrl->lock spinlock IRQs need to be disabled to avoid a dead lock. The new spin_lock() calls recently added produce the following lockdep warning when running the blktest nvme/003: ================================ WARNING: inconsistent lock state -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/2/22 [HC0[0]:SC1[1]:HE0:SE0] takes: ffff888276a8c4c0 (&ctrl->lock){+.?.}-{2:2}, at: nvme_keep_alive_end_io+0x50/0xc0 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x164/0x500 _raw_spin_lock+0x28/0x40 nvme_get_effects_log+0x37/0x1c0 nvme_init_identify+0x9e4/0x14f0 nvme_reset_work+0xadd/0x2360 process_one_work+0x66b/0xb70 worker_thread+0x6e/0x6c0 kthread+0x1e7/0x210 ret_from_fork+0x22/0x30 irq event stamp: 1449221 hardirqs last enabled at (1449220): [<ffffffff81c58e69>] ktime_get+0xf9/0x140 hardirqs last disabled at (1449221): [<ffffffff83129665>] _raw_spin_lock_irqsave+0x25/0x60 softirqs last enabled at (1449210): [<ffffffff83400447>] __do_softirq+0x447/0x595 softirqs last disabled at (1449215): [<ffffffff81b489b5>] run_ksoftirqd+0x35/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&ctrl->lock); <Interrupt> lock(&ctrl->lock); *** DEADLOCK *** no locks held by ksoftirqd/2/22. stack backtrace: CPU: 2 PID: 22 Comm: ksoftirqd/2 Not tainted 5.8.0-rc4-eid-vmlocalyes-dbg-00157-g7236657c #1450 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-1 04/01/2014 Call Trace: dump_stack+0xc8/0x11a print_usage_bug.cold.63+0x235/0x23e mark_lock+0xa9c/0xcf0 __lock_acquire+0xd9a/0x2b50 lock_acquire+0x164/0x500 _raw_spin_lock_irqsave+0x40/0x60 nvme_keep_alive_end_io+0x50/0xc0 blk_mq_end_request+0x158/0x210 nvme_complete_rq+0x146/0x500 nvme_loop_complete_rq+0x26/0x30 [nvme_loop] blk_done_softirq+0x187/0x1e0 __do_softirq+0x118/0x595 run_ksoftirqd+0x35/0x50 smpboot_thread_fn+0x1d3/0x310 kthread+0x1e7/0x210 ret_from_fork+0x22/0x30 Fixes: be93e87e ("nvme: support for multiple Command Sets Supported and Effects log pages") Signed-off-by:Logan Gunthorpe <logang@deltatee.com> Reviewed-by:
Keith Busch <kbusch@kernel.org> Tested-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Chaitanya Kulkarni authored
Instead of calling blk_put_request() which calls blk_mq_free_request(), call blk_mq_free_request() directly for NVMeOF passthru. This is to mainly avoid an extra function call in the completion path nvmet_passthru_req_done(). Signed-off-by:
-
Chaitanya Kulkarni authored
In the existing NVMeOF Passthru core command handling on failure of nvme_alloc_request() it errors out with rq value set to NULL. In the error handling path it calls blk_put_request() without checking if rq is set to NULL or not which produces following Oops:- [ 1457.346861] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1457.347838] #PF: supervisor read access in kernel mode [ 1457.348464] #PF: error_code(0x0000) - not-present page [ 1457.349085] PGD 0 P4D 0 [ 1457.349402] Oops: 0000 [#1] SMP NOPTI [ 1457.349851] CPU: 18 PID: 10782 Comm: kworker/18:2 Tainted: G OE 5.8.0-rc4nvme-5.9+ #35 [ 1457.350951] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e3214 [ 1457.352347] Workqueue: events nvme_loop_execute_work [nvme_loop] [ 1457.353062] RIP: 0010:blk_mq_free_request+0xe/0x110 [ 1457.353651] Code: 3f ff ff ff 83 f8 01 75 0d 4c 89 e7 e8 1b db ff ff e9 2d ff ff ff 0f 0b eb ef 66 8 [ 1457.355975] RSP: 0018:ffffc900035b7de0 EFLAGS: 00010282 [ 1457.356636] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 [ 1457.357526] RDX: ffffffffa060bd05 RSI: 0000000000000000 RDI: 0000000000000000 [ 1457.358416] RBP: 0000000000000037 R08: 0000000000000000 R09: 0000000000000000 [ 1457.359317] R10: 0000000000000000 R11: 000000000000006d R12: 0000000000000000 [ 1457.360424] R13: ffff8887ffa68600 R14: 0000000000000000 R15: ffff8888150564c8 [ 1457.361322] FS: 0000000000000000(0000) GS:ffff888814600000(0000) knlGS:0000000000000000 [ 1457.362337] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1457.363058] CR2: 0000000000000000 CR3: 000000081c0ac000 CR4: 00000000003406e0 [ 1457.363973] Call Trace: [ 1457.364296] nvmet_passthru_execute_cmd+0x150/0x2c0 [nvmet] [ 1457.364990] process_one_work+0x24e/0x5a0 [ 1457.365493] ? __schedule+0x353/0x840 [ 1457.365957] worker_thread+0x3c/0x380 [ 1457.366426] ? process_one_work+0x5a0/0x5a0 [ 1457.366948] kthread+0x135/0x150 [ 1457.367362] ? kthread_create_on_node+0x60/0x60 [ 1457.367934] ret_from_fork+0x22/0x30 [ 1457.368388] Modules linked in: nvme_loop(OE) nvmet(OE) nvme_fabrics(OE) null_blk nvme(OE) nvme_corer [ 1457.368414] ata_piix crc32c_intel virtio_pci libata virtio_ring serio_raw t10_pi virtio floppy dm_] [ 1457.380849] CR2: 0000000000000000 [ 1457.381288] ---[ end trace c6cab61bfd1f68fd ]--- [ 1457.381861] RIP: 0010:blk_mq_free_request+0xe/0x110 [ 1457.382469] Code: 3f ff ff ff 83 f8 01 75 0d 4c 89 e7 e8 1b db ff ff e9 2d ff ff ff 0f 0b eb ef 66 8 [ 1457.384749] RSP: 0018:ffffc900035b7de0 EFLAGS: 00010282 [ 1457.385393] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 [ 1457.386264] RDX: ffffffffa060bd05 RSI: 0000000000000000 RDI: 0000000000000000 [ 1457.387142] RBP: 0000000000000037 R08: 0000000000000000 R09: 0000000000000000 [ 1457.388029] R10: 0000000000000000 R11: 000000000000006d R12: 0000000000000000 [ 1457.388914] R13: ffff8887ffa68600 R14: 0000000000000000 R15: ffff8888150564c8 [ 1457.389798] FS: 0000000000000000(0000) GS:ffff888814600000(0000) knlGS:0000000000000000 [ 1457.390796] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1457.391508] CR2: 0000000000000000 CR3: 000000081c0ac000 CR4: 00000000003406e0 [ 1457.392525] Kernel panic - not syncing: Fatal exception [ 1457.394138] Kernel Offset: disabled [ 1457.394677] ---[ end Kernel panic - not syncing: Fatal exception ]--- We fix this Oops by adding a new goto label out_put_req and reordering the blk_put_request call to avoid calling blk_put_request() with rq value is set to NULL. Here we also update the rest of the code accordingly. Fixes: 06b7164dfdc0 ("nvmet: add passthru code to process commands") Signed-off-by: -
Chaitanya Kulkarni authored
In the current implementation before submitting the passthru cmd we may come across error e.g. getting ns from passthru controller, allocating a request from passthru controller, etc. For all the failure cases it only uses single goto label fail_out. In the target code, we follow the pattern to have a separate label for each error out the case when setting up multiple things before the actual action. This patch follows the same pattern and renames generic fail_out label to out_put_ns and updates the error out cases in the nvmet_passthru_execute_cmd() where it is needed. Signed-off-by:
-
Martin Wilck authored
If we find an optimized path, we quit the loop immediately. Thus we can use just one variable for the next path, slighly simplifying the code. Signed-off-by:
Martin Wilck <mwilck@suse.com> Reviewed-by:
-
Martin Wilck authored
If there's only one usable, non-optimized path, nvme_round_robin_path() returns NULL, which is wrong. Fix it by falling back to "old", like in the single optimized path case. Also, if the active path isn't changed, there's no need to re-assign the pointer. Fixes: 3f6e3246 ("nvme-multipath: fix logic for non-optimized paths") Signed-off-by:
Martin George <marting@netapp.com> Reviewed-by:
-
Tianjia Zhang authored
On an error exit path, a negative error code should be returned instead of a positive return value. Fixes: e399441d ("nvme-fabrics: Add host support for FC transport") Cc: James Smart <jsmart2021@gmail.com> Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Logan Gunthorpe authored
Any command with a non-SGL flag set (like fuse flags) should be rejected. Fixes: c1fef73f ("nvmet: add passthru code to process commands") Signed-off-by:
-
Sagi Grimberg authored
We forgot to free new_model_number Fixes: 013b7ebe ("nvmet: make ctrl model configurable") Reviewed-by:
-
Yufen Yu authored
Normally, blkcg_iolatency_exit() will free related memory in iolatency when cleanup queue. But if blk_throtl_init() return error and queue init fail, blkcg_iolatency_exit() will not do that for us. Then it cause memory leak. Fixes: d7067512 ("block: introduce blk-iolatency io controller") Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
-
Geert Uytterhoeven authored
The various <linux/blk*.h> header files are part of the Block Layer. Add them to the corresponding section in the MAINTAINERS file, so scripts/get_maintainer.pl will pick them up. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Keith Busch authored
A previous commit aligning splits to physical block sizes inadvertently modified one return case such that that it now returns 0 length splits when the number of sectors doesn't exceed the physical offset. This later hits a BUG in bio_split(). Restore the previous working behavior. Fixes: 9cc5169c ("block: Improve physical block alignment of split bios") Reported-by:
Eric Deal <eric.deal@wdc.com> Signed-off-by:
-
Ming Lei authored
c616cbee ("blk-mq: punt failed direct issue to dispatch list") supposed to add request which has been through ->queue_rq() to the hw queue dispatch list, however it adds request running out of budget or driver tag to hw queue too. This way basically bypasses request merge, and causes too many request dispatched to LLD, and system% is unnecessary increased. Fixes this issue by adding request not through ->queue_rq into sw/scheduler queue, and this way is safe because no ->queue_rq is called on this request yet. High %system can be observed on Azure storvsc device, and even soft lock is observed. This patch reduces %system during heavy sequential IO, meantime decreases soft lockup risk. Fixes: c616cbee ("blk-mq: punt failed direct issue to dispatch list") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/block/rnbd/rnbd-srv.c:150:6: warning: variable 'err' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (IS_ERR(bio)) { ^~~~~~~~~~~ drivers/block/rnbd/rnbd-srv.c:177:9: note: uninitialized use occurs here return err; ^~~ drivers/block/rnbd/rnbd-srv.c:150:2: note: remove the 'if' if its condition is always false if (IS_ERR(bio)) { ^~~~~~~~~~~~~~~~~~ drivers/block/rnbd/rnbd-srv.c:126:9: note: initialize the variable 'err' to silence this warning int err; ^ = 0 1 warning generated. err is indeed uninitialized when this statement is taken. Ensure that it is assigned the error value of bio before jumping to the error handling label. Fixes: 735d77d4 ("rnbd: remove rnbd_dev_submit_io") Reported-by:Brooke Basile <brookebasile@gmail.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1134Signed-off-by:
-
- 18 Aug, 2020 2 commits
-
-
Dmitry Monakhov authored
Changes from v1: - update commit description with proper ref-accounting justification commit db37a34c ("block, bfq: get a ref to a group when adding it to a service tree") introduce leak forbfq_group and blkcg_gq objects because of get/put imbalance. In fact whole idea of original commit is wrong because bfq_group entity can not dissapear under us because it is referenced by child bfq_queue's entities from here: -> bfq_init_entity() ->bfqg_and_blkg_get(bfqg); ->entity->parent = bfqg->my_entity -> bfq_put_queue(bfqq) FINAL_PUT ->bfqg_and_blkg_put(bfqq_group(bfqq)) ->kmem_cache_free(bfq_pool, bfqq); So parent entity can not disappear while child entity is in tree, and child entities already has proper protection. This patch revert commit db37a34c ("block, bfq: get a ref to a group when adding it to a service tree") bfq_group leak trace caused by bad commit: -> blkg_alloc -> bfq_pq_alloc -> bfqg_get (+1) ->bfq_activate_bfqq ->bfq_activate_requeue_entity -> __bfq_activate_entity ->bfq_get_entity ->bfqg_and_blkg_get (+1) <==== : Note1 ->bfq_del_bfqq_busy ->bfq_deactivate_entity+0x53/0xc0 [bfq] ->__bfq_deactivate_entity+0x1b8/0x210 [bfq] -> bfq_forget_entity(is_in_service = true) entity->on_st_or_in_serv = false <=== :Note2 if (is_in_service) return; ==> do not touch reference -> blkcg_css_offline -> blkcg_destroy_blkgs -> blkg_destroy -> bfq_pd_offline -> __bfq_deactivate_entity if (!entity->on_st_or_in_serv) /* true, because (Note2) return false; -> bfq_pd_free -> bfqg_put() (-1, byt bfqg->ref == 2) because of (Note2) So bfq_group and blkcg_gq will leak forever, see test-case below. ##TESTCASE_BEGIN: #!/bin/bash max_iters=${1:-100} #prep cgroup mounts mount -t tmpfs cgroup_root /sys/fs/cgroup mkdir /sys/fs/cgroup/blkio mount -t cgroup -o blkio none /sys/fs/cgroup/blkio # Prepare blkdev grep blkio /proc/cgroups truncate -s 1M img losetup /dev/loop0 img echo bfq > /sys/block/loop0/queue/scheduler grep blkio /proc/cgroups for ((i=0;i<max_iters;i++)) do mkdir -p /sys/fs/cgroup/blkio/a echo 0 > /sys/fs/cgroup/blkio/a/cgroup.procs dd if=/dev/loop0 bs=4k count=1 of=/dev/null iflag=direct 2> /dev/null echo 0 > /sys/fs/cgroup/blkio/cgroup.procs rmdir /sys/fs/cgroup/blkio/a grep blkio /proc/cgroups done ##TESTCASE_END: Fixes: db37a34c ("block, bfq: get a ref to a group when adding it to a service tree") Tested-by:Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
If we pass in an offset which is larger than PAGE_SIZE, then page_is_mergeable() thinks it's not mergeable with the previous bio_vec, leading to a large number of bio_vecs being used. Use a slightly more obvious test that the two pages are compatible with each other. Fixes: 52d52d1c ("block: only allow contiguous page structs in a bio_vec") Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
-
- 17 Aug, 2020 5 commits
-
-
Ming Lei authored
1f23816b ("virtio_blk: add discard and write zeroes support") starts to support multi-range discard for virtio-blk. However, the virtio-blk disk may report max discard segment as 1, at least that is exactly what qemu is doing. So far, block layer switches to normal request merge if max discard segment limit is 1, and multiple bios can be merged to single segment. This way may cause memory corruption in virtblk_setup_discard_write_zeroes(). Fix the issue by handling single max discard segment in straightforward way. Fixes: 1f23816b ("virtio_blk: add discard and write zeroes support") Signed-off-by:
-
Ming Lei authored
When queue_max_discard_segments(q) is 1, blk_discard_mergable() will return false for discard request, then normal request merge is applied. However, only queue_max_segments() is checked, so max discard segment limit isn't respected. Check max discard segment limit in the request merge code for fixing the issue. Discard request failure of virtio_blk is fixed. Fixes: 69840466 ("block: fix the DISCARD request merge") Signed-off-by:
-
Ming Lei authored
In case of block device backend, if the backend supports write zeros, the loop device will set queue flag of QUEUE_FLAG_DISCARD. However, limits.discard_granularity isn't setup, and this way is wrong, see the following description in Documentation/ABI/testing/sysfs-block: A discard_granularity of 0 means that the device does not support discard functionality. Especially 9b15d109 ("block: improve discard bio alignment in __blkdev_issue_discard()") starts to take q->limits.discard_granularity for computing max discard sectors. And zero discard granularity may cause kernel oops, or fail discard request even though the loop queue claims discard support via QUEUE_FLAG_DISCARD. Fix the issue by setup discard granularity and alignment. Fixes: c52abf56 ("loop: Better discard support for block devices") Signed-off-by:
Coly Li <colyli@suse.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Xiao Ni <xni@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Evan Green <evgreen@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ming Lei authored
SCHED_RESTART code path is relied to re-run queue for dispatch requests in hctx->dispatch. Meantime the SCHED_RSTART flag is checked when adding requests to hctx->dispatch. memory barriers have to be used for ordering the following two pair of OPs: 1) adding requests to hctx->dispatch and checking SCHED_RESTART in blk_mq_dispatch_rq_list() 2) clearing SCHED_RESTART and checking if there is request in hctx->dispatch in blk_mq_sched_restart(). Without the added memory barrier, either: 1) blk_mq_sched_restart() may miss requests added to hctx->dispatch meantime blk_mq_dispatch_rq_list() observes SCHED_RESTART, and not run queue in dispatch side or 2) blk_mq_dispatch_rq_list still sees SCHED_RESTART, and not run queue in dispatch side, meantime checking if there is request in hctx->dispatch from blk_mq_sched_restart() is missed. IO hang in ltp/fs_fill test is reported by kernel test robot: https://lkml.org/lkml/2020/7/26/77 Turns out it is caused by the above out-of-order OPs. And the IO hang can't be observed any more after applying this patch. Fixes: bd166ef1 ("blk-mq-sched: add framework for MQ capable IO schedulers") Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
Xu Wang authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
- 16 Aug, 2020 7 commits
-
-
Randy Dunlap authored
Fix a kernel-doc warning in block/blk-mq.c: ../block/blk-mq.c:1844: warning: Function parameter or member 'at_head' not described in 'blk_mq_request_bypass_insert' Fixes: 01e99aec ("blk-mq: insert passthrough request into hctx->dispatch directly") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: André Almeida <andrealmeid@collabora.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <ming.lei@redhat.com> Cc: linux-block@vger.kernel.org Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
- 15 Aug, 2020 12 commits
-
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
-
Jens Axboe authored
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: - some code cleanup - a couple of static analysis fixes - setattr: try to pick a fid associated with the file rather than the dentry, which might sometimes matter * tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux: 9p: Remove unneeded cast from memory allocation 9p: remove unused code in 9p net/9p: Fix sparse endian warning in trans_fd.c 9p: Fix memory leak in v9fs_mount 9p: retrieve fid from file when file instance exist.
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small cifs/smb3 fixes, one for stable fixing mkdir path with the 'idsfromsid' mount option" * tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix mkdir when idsfromsid configured on mount cifs: Convert to use the fallthrough macro cifs: Fix an error pointer dereference in cifs_mount()
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Stable fixes: - pNFS: Don't return layout segments that are being used for I/O - pNFS: Don't move layout segments off the active list when being used for I/O Features: - NFS: Add support for user xattrs through the NFSv4.2 protocol - NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC - NFSv4.0 allow nconnect for v4.0 Bugfixes and cleanups: - nfs: ensure correct writeback errors are returned on close() - nfs: nfs_file_write() should check for writeback errors - nfs: Fix getxattr kernel panic and memory overflow - NFS: Fix the pNFS/flexfiles mirrored read failover code - SUNRPC: dont update timeout value on connection reset - freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS - sunrpc: destroy rpc_inode_cachep after unregister_filesystem" * tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits) NFS: Fix flexfiles read failover fs: nfs: delete repeated words in comments rpc_pipefs: convert comma to semicolon nfs: Fix getxattr kernel panic and memory overflow NFS: Don't return layout segments that are in use NFS: Don't move layouts to plh_return_segs list while in use NFS: Add layout segment info to pnfs read/write/commit tracepoints NFS: Add tracepoints for layouterror and layoutstats. NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close() SUNRPC dont update timeout value on connection reset nfs: nfs_file_write() should check for writeback errors nfs: ensure correct writeback errors are returned on close() NFSv4.2: xattr cache: get rid of cache discard work queue NFS: remove redundant initialization of variable result NFSv4.0 allow nconnect for v4.0 freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS sunrpc: destroy rpc_inode_cachep after unregister_filesystem NFSv4.2: add client side xattr caching. NFSv4.2: hook in the user extended attribute handlers NFSv4.2: add the extended attribute proc functions. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull edac fix from Tony Luck: "Fix for the ie31200 driver that missed the first pull" * tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ie31200: Fallback if host bridge device is already initialized
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: "Another round of 'allOf' removals and whitespace clean-ups of schemas" * tag 'devicetree-fixes-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Remove more cases of 'allOf' containing a '$ref' dt-bindings: Whitespace clean-ups in schema files
-
