- 21 Oct, 2019 1 commit
-
-
Dariusz Marcinkiewicz authored
Use the new cec_notifier_conn_(un)register() functions to (un)register the notifier for the HDMI connector. Signed-off-by:
Dariusz Marcinkiewicz <darekm@google.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20191017072842.16793-2-hverkuil-cisco@xs4all.nl
-
- 18 Oct, 2019 6 commits
-
-
Ville Syrjälä authored
Extract drm_mode_hdmi_vic() to correctly calculate the final HDMI VIC for us. Currently this is being done a bit differently between the AVI and HDMI infoframes. Let's get both to agree on this. We need to allow the case where a mode is both 3D and has a HDMI VIC. Currently we'll just refuse to generate the HDMI infoframe when we really should be setting HDMI VIC to 0 and instead enabling 3D stereo signalling. If the sink doesn't even support the HDMI infoframe we should not be picking the HDMI VIC in favor of the CEA VIC, because then we'll end up not sending either VIC in the end. Cc: Wayne Lin <waynelin@amd.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191004141914.20600-3-ville.syrjala@linux.intel.comReviewed-by:
Uma Shankar <uma.shankar@intel.com>
-
Ville Syrjälä authored
Extract the logic to compute the final CEA VIC to a small helper. We'll reorder it a bit to make future modifications more straightforward. No function changes. Cc: Wayne Lin <waynelin@amd.com> Signed-off-by:
-
Ville Syrjälä authored
drm_get_cea_aspect_ratio() is not used outside drm_edid.c. Make it static. Cc: Wayne Lin <waynelin@amd.com> Signed-off-by:
-
Adam Jackson authored
1<<31 is undefined because it's a signed int and C is terrible. Reviewed-by:
Eric Engestrom <eric.engestrom@intel.com> Signed-off-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
-
Chunming Zhou authored
user space needs a flexiable query ability. So that umd can get last signaled or submitted point. v2: add sanitizer checking. v3: rebase Change-Id: I6512b430524ebabe715e602a2bf5abb0a7e780ea Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Christian König <Christian.Koenig@amd.com> Reviewed-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/series/64044/
-
Ben Dooks (Codethink) authored
Make the following items static to avoid clashes with other parts of the kernel (dev_attr_core_id) or just silence the following sparse warning: drivers/gpu/drm/arm/malidp_drv.c:371:24: warning: symbol 'malidp_fb_create' was not declared. Should it be static? drivers/gpu/drm/arm/malidp_drv.c:494:6: warning: symbol 'malidp_error_stats_dump' was not declared. Should it be static? drivers/gpu/drm/arm/malidp_drv.c:668:1: warning: symbol 'dev_attr_core_id' was not declared. Should it be static? Signed-off-by:
Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191017111756.12861-1-ben.dooks@codethink.co.uk
-
- 17 Oct, 2019 18 commits
-
-
Qiang Yu authored
This prevent CMA printing dumy "PFNs busy" info which is caused by alloc fail re-try case. Reviewed-by:
Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191010140152.17747-4-yuq825@gmail.com
-
Qiang Yu authored
Simplify the driver code with DRM GEM helper function. v2: improve commit comment. Reviewed-by:
-
Qiang Yu authored
Do not need to maintain our own shmem memory management code as drm_gem_shmem_helpers provides it. And we can also benifit from the work of others with shared code. This is also a preparation for implementing buffer madv. Reviewed-by:
-
Wen He authored
Add optional property node 'arm,malidp-arqos-value' for the Mali DP500. This property describe the ARQoS levels of DP500's QoS signaling. Signed-off-by:
Wen He <wen.he_1@nxp.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
YueHaibing authored
If DEM_QXL is y and DRM_TTM_HELPER is m, building fails: drivers/gpu/drm/qxl/qxl_object.o: undefined reference to `drm_gem_ttm_print_info' Select DRM_TTM_HELPER to fix this. Fixes: 78d54f1f ("drm/qxl: use drm_gem_ttm_print_info") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/20191008024054.32368-1-yuehaibing@huawei.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Thomas Zimmermann authored
The cirrus driver's header file is left over from a recent rewrite. Remove it. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20191017113427.2167-1-tzimmermann@suse.deSigned-off-by:
-
Gerd Hoffmann authored
Not needed any more because we don't have vram specific fops any more. DEFINE_DRM_GEM_FOPS() can be used instead. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20191016115203.20095-12-kraxel@redhat.com
-
Gerd Hoffmann authored
Not needed any more. Signed-off-by:
-
Gerd Hoffmann authored
Wire up the new drm_gem_ttm_mmap() helper function, use generic drm_gem_mmap for &fops.mmap and delete dead drm_vram_mm_file_operations_mmap(). Signed-off-by:
-
Gerd Hoffmann authored
Add helper function to mmap ttm bo's using &drm_gem_object_funcs.mmap(). Note that with this code path access verification is done by drm_gem_mmap() (which calls drm_vma_node_is_allowed(()). The &ttm_bo_driver.verify_access() callback is is not used. v3: use ttm_bo_mmap_obj instead of ttm_bo_mmap_vma_setup Signed-off-by:
-
Gerd Hoffmann authored
Rename ttm_fbdev_mmap to ttm_bo_mmap_obj. Move the vm_pgoff sanity check to amdgpu_bo_fbdev_mmap (only ttm_fbdev_mmap user in tree). The ttm_bo_mmap_obj function can now be used to map any buffer object. This allows to implement &drm_gem_object_funcs.mmap in gem ttm helpers. v3: patch added to series Signed-off-by:
-
Gerd Hoffmann authored
Factor out ttm vma setup to a new function. Reduces code duplication a bit. v2: don't change vm_flags (moved to separate patch). v4: make ttm_bo_mmap_vma_setup static. Signed-off-by:
-
Gerd Hoffmann authored
DEFINE_DRM_GEM_SHMEM_FOPS is identical to DEFINE_DRM_GEM_FOPS now, drop it. Signed-off-by:
-
Gerd Hoffmann authored
VM_IO is wrong here, shmem uses normal ram not io memory. Signed-off-by:
Steven Price <steven.price@arm.com> Acked-by:
-
Gerd Hoffmann authored
Not obvious why this is needed. According to Deniel Vetter this is most likely a historic artefact dating back to the days where drm drivers exposed hardware registers as mmap'able gem objects, to avoid dumping touching those registers. shmem gem objects surely don't need that ... Signed-off-by:
-
Gerd Hoffmann authored
Switch gem shmem helper to the new mmap() workflow, from &gem_driver.fops.mmap to &drm_gem_object_funcs.mmap. v2: Fix vm_flags and vm_page_prot handling. Signed-off-by:
-
Gerd Hoffmann authored
drm_gem_object_funcs->vm_ops alone can't handle everything which needs to be done for mmap(), tweaking vm_flags for example. So add a new mmap() callback to drm_gem_object_funcs where this code can go to. Note that the vm_ops field is not used in case the mmap callback is present, it is expected that the callback sets vma->vm_ops instead. Also setting vm_flags and vm_page_prot is the job of the new callback. so drivers have more control over these flags. drm_gem_mmap_obj() will use the new callback for object specific mmap setup. With this in place the need for driver-speific fops->mmap callbacks goes away, drm_gem_mmap can be hooked instead. drm_gem_prime_mmap() will use the new callback too to just mmap gem objects directly instead of jumping though loops to make drm_gem_object_lookup() and fops->mmap work. Signed-off-by:
-
Thomas Zimmermann authored
The DRM TODO list now contains an entry for converting fbdev drivers over to DRM. Signed-off-by:
-
- 16 Oct, 2019 8 commits
-
-
Sebastian Andrzej Siewior authored
The dependency has been changed from `PREEMPT' to `PREEMPTION'. Reflect this change in the comment. Use `PREEMPTION' in the comment. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Lowry Li (Arm Technology China) authored
Sets output color format according to the connector formats and display supported formats. Default value is RGB444 and only force YUV format which must be YUV. Signed-off-by:
Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
-
Lowry Li (Arm Technology China) authored
Set color_depth according to connector->bpc. Changes since v1: - Fixed min_bpc is effectively set but not used in komeda_crtc_get_color_config(). Changes since v2: - Align the code. Signed-off-by:
Mihail Atanassov <mihail.atanassov@arm.com> Reviewed-by:
-
Lowry Li (Arm Technology China) authored
Adds maximum line size check according to the AFBC decoder limitation and special Line size limitation(2046) for format: YUV420_10BIT and X0L2. Signed-off-by:
-
Lowry Li (Arm Technology China) authored
On D71, we are using the global line size. From D32, every component have a line size register to indicate the fifo size. So this patch is to set line size support and do the line size check. Signed-off-by:
-
Thomas Zimmermann authored
The vboxvideo driver's struct vram_framebuffer stores a DRM framebuffer with an assiciated GEM object. This functionality is also provided by generic code. Switch vboxvideo over. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191011134808.3955-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
The vboxvideo driver provides struct drm_framebuffer_funcs.dirty_fb from its own implementation. Switch over to drm_atomic_helper_dirty_fb() and handle screen updates in the primary plane's atomic_update function. With dirty_fb out of the way, we can further replace struct vbox_frammebuffer with generic code. Signed-off-by:
-
Thomas Zimmermann authored
There's nothing special about vboxvideo's fbdev emulation that is not provided by the generic implementation. Switch over and remove the driver's code. Signed-off-by:
-
- 15 Oct, 2019 2 commits
-
-
Rodrigo Siqueira authored
LT-tunable PHY Repeaters can operate in two different modes: transparent (default) and non-transparent. The value 0x55 specifies the transparent mode, and 0xaa represents the non-transparent; this commit adds these two values as definitions. Cc: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Signed-off-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191015134010.26zwopwnrbsmz5az@outlook.office365.com
-
Daniel Kurtz authored
When setting a new display mode, dw_hdmi_setup() calls dw_hdmi_enable_video_path(), which disables all hdmi clocks, including the audio clock. We should only (re-)enable the audio clock if audio was already enabled when setting the new mode. Without this patch, on RK3288, there will be HDMI audio on some monitors if i2s was played to headphone when the monitor was plugged. ACER H277HU and ASUS PB278 are two of the monitors showing this issue. Signed-off-by:
Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
Yakir Yang <ykk@rock-chips.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
- 14 Oct, 2019 5 commits
-
-
Guido Günther authored
The bridge might have special requirmentes on the input bus. This is e.g. used by the imx-nwl bridge. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Reviewed-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Robert Chiras authored
Currently, the MXSFB DRM driver only supports a panel. But, its output display signal can also be redirected to another encoder, like a DSI controller. In this case, that DSI controller may act like a drm_bridge. In order support this use-case too, this patch adds support for drm_bridge in mxsfb. Signed-off-by:
Robert Chiras <robert.chiras@nxp.com> Tested-by:
-
Lucas De Marchi authored
Fixes: 83fa9842 ("drm/dp-mst: Drop connection_mutex check") Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/omapdrm/dss/hdmi4_core.c: In function hdmi4_audio_config: drivers/gpu/drm/omapdrm/dss/hdmi4_core.c:689:6: warning: variable err set but not used [-Wunused-but-set-variable] It is not used since commit f5bab222 ("OMAPDSS: HDMI: Add OMAP5 HDMI support") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/1570518949-47574-5-git-send-email-zhengbin13@huawei.com
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/omapdrm/dss/hdmi5_core.c: In function hdmi5_audio_config: drivers/gpu/drm/omapdrm/dss/hdmi5_core.c:812:6: warning: variable err set but not used [-Wunused-but-set-variable] It is not used since commit f5bab222 ("OMAPDSS: HDMI: Add OMAP5 HDMI support") Reported-by:
-
