Here is a patch that brings the lm75 and lm78 drivers in compliance with
sysfs naming conventions. The drivers as found in existing 2.6 kernels
do not have a digit appended to the temperature-related files names as
the sysfs naming conversion recommends (obviously because they each have
a single temperature channel). As a result, libsensors won't find the
files.

It was discussed on the list wether a '1' should be appended in this
case, and our conclusion was that it would be better to do so because it
helps automatic processing of the sysfs exported files. Please apply if
you agree with this.

The following patch adds support for the ADM1025 evaluation board to the
i2c-parport (and i2c-parport-light) driver(s). In fact, it happens that
it was already supported as an ADM1032 evaluation board, so it is just a
matter of documenting it correctly.

This patch fixes the bus reset in i2c-philips-par when it is loaded with
type!=0. For now, the reset is always made as is type==0. I guess that
this driver will be abandoned in a while, but it probably doesn't hurt
to fix that.

Undo a recent change to the i2c documentation. The change belongs to
2.7.

This patch fixes a "Trying to release non-existent resource" error that
occurs during rmmod when the device isn't actually present.  It includes
some other cleanups too: error paths, whitespace, magic numbers, __devinit.

Add back the old i82489DX bits to use timer scaling for the old
non-integrated APIC setup. 

It's possible these bits don't need to be set on i82489DXs,
but not having this HW for testing I elected to maintain
the old behaviour on these old machines.

We used to write fields that were marked RESERVED and that
are apparently some old stale timer base. Stop doing that.

Verified with Mikael Pettersson, and confirmed to fix ACPI
boot-time lockups for a few people. 

into home.osdl.org:/home/torvalds/v2.5/linux

ppc64 doesn't use drivers/Kconfig (it should) so it needs to include i2c by
hand.

From: Anton Blanchard <anton@samba.org>

We were missing the sched_balance_exec call.  Could explain some NUMA
scheduling weirdness we were seeing.

From: "H. Peter Anvin" <hpa@zytor.com>

This is purely a doc patch saying RAID-6 support is available in
mdadm-1.5.0 and the patch is no longer necessary.

From: "H. Peter Anvin" <hpa@zytor.com>

As expected, when it hit mainline I started getting real bug reports... 
the attached patch does the following:

- Fixes a few x86-64 specific bugs;

- Removes MMX and SSE-1 from x86-64 (if we have x86-64 we have SSE-2);

- Slightly astracts the integer code to make it easier to add
  architecture-specific optimizations later (e.g.  IA64 once gcc gets
  better IA64 intrinsics support);

- Resurrects the user-space testbench, and makes it not output the known
  false positive of the D+Q case (D+Q is equivalent to a RAID-5 recovery,
  so I didn't implement it in the user-space testbench.)

into home.osdl.org:/home/torvalds/v2.5/linux

RFC 2461 requires that the source address of Neighbor Discovery messages
is an address assigned to the sending interface.

Duplicate Address Detection should also be interface specific. We don't,
for example, want a node to DoS itself just because it has two interfaces
on the same link and both happen to listen to the same multicast group. If
there is a true duplicate on the link, the interface doing DAD will notice
it anyway.

The attached patch adds a 'strict' parameter to ip6_chk_addr() and
ip6_get_ifaddr() to allow link-local protocols like ND and DAD to do
strict address checks even on addresses with greater scope than
link-local.

> Paul Mackerras:
>   o sort exception tables

And as more proof that Paul is leaving us ppc32 folks, *sniff*, the
following is needed for PPC32 to compile:

Here's a novel idea, check the CPU has machine check capabilities
before we start polling registers.

I was wondering why my VIA C3 was starting this.  Who knows it may solve
some of the random crashes I saw there.

This updates / adds documentation for the bttv, saa7134 and cx88
video4linux drivers.

trivial one: uses __init and thus needs linux/init.h

into home.osdl.org:/home/torvalds/v2.5/linux

       we take the appropriate action. (throw the byte away, reset
       byte counter, return NAK if acking, and complain).

       psmouse_rate= option.

into kernel.bkbits.net:/home/davem/sparc-2.6

Do not pass a NULL mm to mmdrop().

into home.osdl.org:/home/torvalds/v2.5/linux

From: Gerd Knorr <kraxel@bytesex.org>

Use module_param() rather than the deprecated MODULE_PARM() in this driver.

From: Jes Sorensen <jes@trained-monkey.org>

The new sort_extable and shared search_extable code doesn't work on ia64.
I have introduced two new #defines that archs can define to avoid the
common code being built.  ARCH_HAS_SEARCH_EXTABLE and
ARCH_HAS_SORT_EXTABLE.

From: David Howells <dhowells@redhat.com>

Eliminate the printing of the cache token if present: using cpp
conditionals inside macro expansions is not legal and some gcc's fail it.