- 13 Nov, 2012 40 commits
-
-
Malcolm Priestley authored
Size of long issues. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
Size of long issues replace with u32. Signed-off-by:
-
Malcolm Priestley authored
Size of long issues. Framesize correction replace DWORD with u32. Signed-off-by:
-
Malcolm Priestley authored
Fixes size of long issues replace DWORD with u32. Signed-off-by:
-
Malcolm Priestley authored
Fixes the deadlock on 64 bit. Signed-off-by:
-
Malcolm Priestley authored
Fixes 64 bit deadlock on successful association. Signed-off-by:
-
Malcolm Priestley authored
Signed-off-by:
-
Malcolm Priestley authored
This reduces the number of free TX urbs when key is not found. Signed-off-by: -
Malcolm Priestley authored
remove TKIPCounterMeasuresInvoked and byCntMeasure Signed-off-by:
-
Malcolm Priestley authored
Signed-off-by:
-
Malcolm Priestley authored
bReAllocSkb == FALSE is when data is not fed to user land. Free and relocate skbuff. Where data is not sent return = FALSE from RXbBulkInProcessData. This appears to reduce false errors when a reused skbuff has old data. Signed-off-by:
-
Malcolm Priestley authored
Signed-off-by:
-
Maxim Mikityanskiy authored
BEACON_INTERVAL register is 16-bit, not 32-bit Signed-off-by:
Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by:
-
Maxim Mikityanskiy authored
Removed empty read_acadapter_file() and priv->PowerProfile that never changes its value Signed-off-by:
-
Maxim Mikityanskiy authored
Removed unused fields in r8180_priv and dead code that appeared after field removal Signed-off-by:
-
Maxim Mikityanskiy authored
Removed unneeded reads from EEPROM and some unnecessary conditions Signed-off-by:
-
Maxim Mikityanskiy authored
Use ARRAY_SIZE macro instead of hardcoding array size into loop condition and remove unused last item of rtl8225z2_rxgain[] Signed-off-by:
-
Maxim Mikityanskiy authored
Signed-off-by:
-
Maxim Mikityanskiy authored
Cleaned up r8180.h header file by removing headers of functions that don't exist Signed-off-by:
-
Maxim Mikityanskiy authored
Fixed typo in TransmitConfig and removed always false condition Signed-off-by:
-
Maxim Mikityanskiy authored
Removed two parameters of HwHSSIThreeWire() that are equal in all function calls, fixed return type, fixed register width and simplified code Signed-off-by:
-
Maxim Mikityanskiy authored
Removed some unused functions, arrays and #define in r8180_core.c Signed-off-by:
-
Maxim Mikityanskiy authored
Removed confusing and unimplemented module parameters and fix NIC name in module description Signed-off-by:
-
Maxim Mikityanskiy authored
Don't remove procfs entry that is never created Signed-off-by:
-
Maxim Mikityanskiy authored
Removed unnecessary variable in GetSupportedWirelessMode8185() and shortened its code Signed-off-by:
-
Maxim Mikityanskiy authored
Fixed typo in rtl8180_interrupt() and added missing line Signed-off-by:
-
Maxim Mikityanskiy authored
Removed empty functions, their calls and 'do {} while (0)' loop condition Signed-off-by: -
Maxim Mikityanskiy authored
Removed rtl8225_rf_set_chan() and corresponding arrays, changed its usage to rtl8225z2_rf_set_chan() Signed-off-by:
-
Maxim Mikityanskiy authored
Removed stale functions that are never called Signed-off-by:
-
Kevin McKinney authored
This patch adds two new products and modifies the device id table to include them. In addition, product of 0xbccd - BCM_USB_PRODUCT_ID_SM250 is removed because Beceem, ZTE, Sprint use this id for block devices. Reported-by:
Muhammad Minhazul Haque <mdminhazulhaque@gmail.com> Signed-off-by:
Kevin McKinney <klmckinney1@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Peter Hurley authored
This patch provides the kernel driver for high-speed TTY communication over the IEEE 1394 bus. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Ian Abbott authored
In the interrupt service routine, check the device is asserting the shared interrupt line and check that interrupts have been enabled. When attaching the device, disable interrupts before setting up the interrupt handler to avoid handling spurious interrupts before the device is ready. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Wei Yongjun authored
The variable 'p' is initialized but never used otherwise, so remove the unused variable. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Kumar Amit Mehta authored
fixed few error and warning messages as reported by checkpatch.pl Signed-off-by:
Kumar Amit Mehta <gmate.amit@gmail.com> Signed-off-by:
-
H Hartley Sweeten authored
Commit: 0fcdafb8 staging: comedi: addi-data: cleanup reading of the PCI bars Changed this test before reading the PCI bars: if ((this_board->pc_EepromChip == NULL) || (strcmp(this_board->pc_EepromChip, ADDIDATA_9054) != 0)) { to this: if (!this_board->pc_EepromChip || !strcmp(this_board->pc_EepromChip, ADDIDATA_9054)) { I just noticed that the strcmp test is wrong. This fixes the test and adds a comment for it. This error "broke" the addi-data drivers but they are broken anyway since they don't follow the comedi core API. The addi_apci_1032 driver has been converted to follow the comedi core API. This error effects that driver since the iobase for it should be found in PCI bar 1 not 2. This fixes that also. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
H Hartley Sweeten authored
Change the remaining addi-data drivers so they attach using the generic 'auto_attach' method instead the pci specific 'attach_pci' method. The 'attach_pci' is deprecated and is going to be removed. Signed-off-by:
-
H Hartley Sweeten authored
Change the addi-data drivers that use the "common" code so they attach using the generic 'auto_attach' method instead the pci specific 'attach_pci' method. The 'attach_pci' is deprecated and is going to be removed. Signed-off-by:
-
H Hartley Sweeten authored
This driver does not follow the comedi API. The digital input 'insn_bits' function is supposed to return the status of all the input channels in data[1]. Currently this function returns the status in data[0]. Fix the function so it works like the comedi core expects. The 'insn_read' and 'insn_Write' functions for the digital input subdevice cannot be removed yet. This driver is again abusing the API and uses these functions to initialize the board and start/stop "events" generated by the board. These will be addressed later. Signed-off-by:
-
H Hartley Sweeten authored
The digital outputs of the board supported by this driver are not configurable. This driver abuses the comedi API and uses the 'insn_config' function of the digital output subdevice to enable/disable writing to the eeprom on the board. Remove this function. Signed-off-by:
-
H Hartley Sweeten authored
This driver does not follow the comedi API. The digital output 'insn_bits' function is passed a mask value in data[0] indicating which output bits in data[1] are changing. The function is then supposed to update the outputs accordingly and then return the current state of the outputs in data[1]. Currently this driver uses the 'insn_write' function to update either a single or all the output channels. And it uses the 'insn_bits' function to read either a single or all the output channel states. Fix the 'insn_bits' function so it works like the comedi core expects. The core can then use the function to emulate the 'insn_read' and 'insn_write' functions for individual channels. Signed-off-by:
-
